I have a requirement to automate the process of connecting to PowerDesigner through java to extract the models from repository. I have used the OLE Automation JavaProxy document to configure the process.
when trying to run, I'm getting this error:
Exception in thread "main" java.lang.NoSuchMethodError: org.eclipse.swt.internal.ole.win32.COM.CoCreateInstance(Lorg/eclipse/swt/internal/ole/win32/GUID;IILorg/eclipse/swt/internal/ole/win32/GUID;[I)I
at
com.sybase.stf.powerdesigner.PdCommon.Application.start(Application.java:57)
at
com.sybase.stf.powerdesigner.PdCommon.Application.(Application.java:31)
at
com.sybase.stf.powerdesigner.PdCommon.Application.getInstance(Application.java:42)
at OOM.src.createOOM.CreateOOM.CreateAndDisplayOOM(CreateOOM.java:37)
at OOM.src.createOOM.CreateOOM.main(CreateOOM.java:28)
Versions:
PowerDesigner - 16.5.5.0
Eclipse 4.18
Supporting Jars:
pdj2com_16.5.5.jar
org.eclipse.swt.win32.win32.x86_64_3.115.100.v20201202-1103.jar
The above issue is resolved Thanks!
Now i'm facing trouble connecting again with the below issue.
org.eclipse.swt.SWTException: Action can not be performed. result = -2137456383 (com.sybase.stf.powerdesigner.com.COMException: COM Failure [HRESULT: 0x80990101])
at org.eclipse.swt.ole.win32.OLE.error(OLE.java:345)
at com.sybase.stf.powerdesigner.com.COMException.raiseOnFail(COMException.java:83)
at com.sybase.stf.powerdesigner.com.IDispatchEx.raisingInvoke(IDispatchEx.java:231)
at com.sybase.stf.powerdesigner.PdCommon.IApplication.CreateModel(IApplication.java:84)
at OOM.src.createOOM.CreateOOM.createOOM(CreateOOM.java:68)
at OOM.src.createOOM.CreateOOM.CreateAndDisplayOOM(CreateOOM.java:42)
at OOM.src.createOOM.CreateOOM.main(CreateOOM.java:28)
Caused by: com.sybase.stf.powerdesigner.com.COMException: COM Failure [HRESULT: 0x80990101]
at com.sybase.stf.powerdesigner.com.COMException.raiseOnFail(COMException.java:88)
... 5 more
Is there anything else to add to the code to connect?
I am not able to find any solution online. Kindly help me figure this out. Thanks in advance.
The swt.win.win32.x86_64 jar is for 64-bit, so I assume you're using a 64-bit Java.
In my case, the pdj2com jar is named something like pdj2com_16.N.Nx64.jar for the 64-bit version. pdj2com_16.N.N.jar is the name of the 32-bit version.
I recently upgraded my MacOSX system to Catalina and several files were placed automatically into "Relocated items" folder on my Desktop. I recently tried to run the following code which had previously worked:
qualimap bamqc -bam Sample1_sorted.bam -c -outdir QualiMap/Sample1_sorted
and received the following error:
Java HotSpot(TM) 64-Bit Server VM warning: Ignoring option MaxPermSize; support was removed in 8.0
Error: Unable to initialize main class org.bioinfo.ngs.qc.qualimap.main.NgsSmartMain
Caused by: java.lang.NoClassDefFoundError: org/apache/commons/cli/ParseException
I have seen many other posts related to this error but am unsure how to even go about trying some of the suggested solutions. I do not work directly with some of the applications/files mentioned in these forums, such as JAVA, Maven, AppAssembler, and the pom.xml file (I could not even find that file). As a result, I wished to ask about this error from the perspective of a biologist using qualimap.
How can I fix this error (with little knowledge of the above applications/files)? I can certainly work with these applications/files, but I would probably need more detailed/basic/low-level advice on how to access and modify them. Thank you!
It seems what qualimap is a java application someone else wrote. I would raise a ticket with whomever wrote this app.
I am new to WebSphere Application Server.Getting this error in WAS Console while executing junit class (RunAs--> JUnit Test)
Running as Junit Test in Rational Application Developer
Actual Error Message is:
JVMJ9TI001E Agent library D:\Program Files\IBM\SDPShared\plugins\org.eclipse.tptp.platform.jvmti.runtime_4.7.0.v201110280852\agent_files\win_em64t\JPIBootLoader could not be opened (D:\Program Files\IBM\SDPShared\plugins\org.eclipse.tptp.platform.jvmti.runtime_4.7.0.v201110280852\agent_files\win_em64t\JPIBootLoader is not a valid Win32 application. )
JVMJ9VM015W Initialization error for library j9jvmti24(-3): JVMJ9VM009E J9VMDllMain failed .
Came Across this below links and tried but can't able to resolve"
link1-IBM
link2-IBM
I am using windows 10 64 bit, RAD 8.0.4 , WAS 7.0.23 ,Junit 4.12.
Help me to resolve this issue. Thanks in Advance.
Is the Junit running within the IDE's JVM? To check click on Run > Run Configurations, and look for the unit test you are trying to run. Then click on the JRE tab. It should show the Project Execution Environment.
Also, you're on a considerably old version of RAD and WAS. Any reason you can't upgrade?
We have a custom service that we install with our application. The only problem is that after it is installed, it will not start, generating the error above. I have tried to diagnose what the problem is, but can't seem to find any useful information as to why it is quitting. I have tried the same service on a non "R2" 2008 server, and manual it worked fine.
service simple java file running using batch file. Deamon service.
Has anyone had any experience troubleshooting this type of problem, where there are so few clues?
Goto:
Registry-> HKEY_LOCAL_MACHINE-> System-> CurrentControlSet-> Services.
Find the concerned service & delete it. Close regedit. Reboot the PC & Re-install the concerned service. Now the error should be gone.
This is a problem related permission.
Make sure that the current user has access to the folder which contains installation files.
I resolved the problem.This is for EAServer Windows Service
Resolution is -->
Open Regedit in Run prompt
Under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\EAServer
In parameters, give SERVERNAME entry as EAServer.
[It is sometime overwritten with Envirnoment variable : Path value]
This error message appears if the Windows service launcher has quit immediately after being started.
This problem usually happens because the license key has not been correctly deployed(license.txt file in the license folder).
If service is not strtign with correct key, just put incorrect key and try to start. Once started, place the correct key, it will work.
I had this error, I looked into a log file C:\...\mysql\data\VM-IIS-Server.err and found this
2016-06-07 17:56:07 160c InnoDB: Error: unable to create temporary file; errno: 2
2016-06-07 17:56:07 3392 [ERROR] Plugin 'InnoDB' init function returned error.
2016-06-07 17:56:07 3392 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
2016-06-07 17:56:07 3392 [ERROR] Unknown/unsupported storage engine: InnoDB
2016-06-07 17:56:07 3392 [ERROR] Aborting
The first line says "unable to create temporary file", it sounds like "insufficient privileges", first I tried to give access to mysql folder for my current user - no effect, then after some wandering around I came up to control panel->Administration->Services->Right Clicked MysqlService->Properties->Log On, switched to "This account", entered my username/password, clicked OK, and it woked!
In my case the error 1067 was caused with a specific version of Tomcat 7.0.96 32-bit in combination with AdoptOpenJDK. Spent two hours on it, un-installing, re-installing and trying different Java settings but Tomcat would not start. See...
ASF Bugzilla – Bug 63625
seems to point at the issue though they refer to seeing a different error.
I tried 7.0.99 32-bit and it started straight away with the same AdoptOpenJDK 32-bit binary install.
I solved this issue using Monitor Tomcat application. I ran it and after a few seconds its icon appeared in my system tray. I right clicked on the icon and clicked the start button and after a few seconds Apache Tomcat started.
I have a working android app, I now have a new mac for the sole purpose of developing the same app on iphone. I have installed xmlvm on the mac and I moved by android app into the workspace and when I try and cross compile I get an error - could not find input resource: bin. Anybody here using xmlvm to cross compile android apps? Can you help with this error? There is a bin folder in my Test_One project.
pwd /Users/iosdev/Documents/workspace/xmlvm/Test_One
/Users/iosdev
iOS-Mac-mini:~ iosdev$ java -Xmx700m -jar /Users/iosdev/Documents/workspace/xmlvm/dist/xmlvm.jar --in=bin --out=out --target=iphonec --app-name=testone
[03/11/12 10:00:19.281] ERROR: InputProcessFactory: Could not find input resource: bin
[03/11/12 10:00:19.290] ERROR: XmlvmProcessor: No inputs to process.
[03/11/12 10:00:19.290] ERROR: Something went wrong during processing.
iOS-Mac-mini:~ iosdev$
Try with in=bin/, or with --in=bin/*. The problem is simple: It can't find the "bin"-resource, I guess it thinks of it as a file and not a directory.