We have a custom service that we install with our application. The only problem is that after it is installed, it will not start, generating the error above. I have tried to diagnose what the problem is, but can't seem to find any useful information as to why it is quitting. I have tried the same service on a non "R2" 2008 server, and manual it worked fine.
service simple java file running using batch file. Deamon service.
Has anyone had any experience troubleshooting this type of problem, where there are so few clues?
Goto:
Registry-> HKEY_LOCAL_MACHINE-> System-> CurrentControlSet-> Services.
Find the concerned service & delete it. Close regedit. Reboot the PC & Re-install the concerned service. Now the error should be gone.
This is a problem related permission.
Make sure that the current user has access to the folder which contains installation files.
I resolved the problem.This is for EAServer Windows Service
Resolution is -->
Open Regedit in Run prompt
Under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\EAServer
In parameters, give SERVERNAME entry as EAServer.
[It is sometime overwritten with Envirnoment variable : Path value]
This error message appears if the Windows service launcher has quit immediately after being started.
This problem usually happens because the license key has not been correctly deployed(license.txt file in the license folder).
If service is not strtign with correct key, just put incorrect key and try to start. Once started, place the correct key, it will work.
I had this error, I looked into a log file C:\...\mysql\data\VM-IIS-Server.err and found this
2016-06-07 17:56:07 160c InnoDB: Error: unable to create temporary file; errno: 2
2016-06-07 17:56:07 3392 [ERROR] Plugin 'InnoDB' init function returned error.
2016-06-07 17:56:07 3392 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed.
2016-06-07 17:56:07 3392 [ERROR] Unknown/unsupported storage engine: InnoDB
2016-06-07 17:56:07 3392 [ERROR] Aborting
The first line says "unable to create temporary file", it sounds like "insufficient privileges", first I tried to give access to mysql folder for my current user - no effect, then after some wandering around I came up to control panel->Administration->Services->Right Clicked MysqlService->Properties->Log On, switched to "This account", entered my username/password, clicked OK, and it woked!
In my case the error 1067 was caused with a specific version of Tomcat 7.0.96 32-bit in combination with AdoptOpenJDK. Spent two hours on it, un-installing, re-installing and trying different Java settings but Tomcat would not start. See...
ASF Bugzilla – Bug 63625
seems to point at the issue though they refer to seeing a different error.
I tried 7.0.99 32-bit and it started straight away with the same AdoptOpenJDK 32-bit binary install.
I solved this issue using Monitor Tomcat application. I ran it and after a few seconds its icon appeared in my system tray. I right clicked on the icon and clicked the start button and after a few seconds Apache Tomcat started.
Related
I have just installed SonarQube server on my Windows 8 computer according to "Get Started in Two Minutes" instructions. I have the latest Java (jre1.8.0_131) on my machine. I got an error at startup in web.log. How can i fix that?
2017.07.17 05:24:33 ERROR web[][o.s.s.p.Platform] Background initialization failed. Stopping SonarQube
java.lang.IllegalArgumentException: Custom Analyzer [ındex_words_analyzer] failed to find filter under name [word_filter]
at org.elasticsearch.index.analysis.CustomAnalyzerProvider.build(CustomAnalyzerProvider.java:76)
Your logs point to an unexpected state, that should never appear. Either this is a bug in SonarQube, or something unexpected happened to your SonarQube installation.
I suggest these steps:
Verify your MD5 hash of your download. If the checksum does not match, redownload.
Unzip the downloaded zip file again.
Start with a new, empty directory
With the new version of SonarQube 6.6, the problem seems to be fixed somehow. SonarQube Server is able to start now.
I am trying to create a windows service for Apache tomcat 7.0.45.
( in windows version 7)
I executed this :
C:/tomcat7/bin> service install Mytomcat7
Windows service has been created. but it wont start and throws "specific server error code 4".
Can you please help with the steps to create windows service.
I had the same problem!
Found out, that the service.bat didn't configure the service the right way. If you enable the logging from your service starter:
Then you'll see in your loggs something like:
[2014-02-19 16:40:35] [error] ( javajni.c:863 ) [ 2636] FindClass org/apache/catalina/startup/Bootstrap failed
[2014-02-19 16:40:35] [debug] ( javajni.c:964 ) [ 2636] Java Worker thread finished org/apache/catalina/startup/Bootstrap:main with status=3
[2014-02-19 16:40:35] [error] ( prunsrv.c:1183) [ 5000] Failed to start Java
[2014-02-19 16:40:35] [error] ( prunsrv.c:1536) [ 5000] ServiceStart returned 4
You'll notice that there is some classpath problem with the starter. In fact that's the problem! Your service.bat didn't configure the service the right way:
Note: You can also choose "Use default" above "Java Virtual Machine" to use whatever JVM is defined in JAVA_HOME
You'll need to set the classpath correctly:
c:\webclient\apache-tomcat\bin\tomcat-juli.jar;c:\webclient\apache-tomcat\bin\tomcat-juli.jar;c:\webclient\apache-tomcat\bin\bootstrap.jar
In my case i "installed" tomcat at: c:\webclient\apache-tomcat replace that part with yours. In my case not even the Java VM was set.. I'm not shure whether this is a problem with the current versions of tomcat (and it's service.bat), or with some sort of permission problem on the windows server itself..
To solve this error perform the following steps:
Run the tomcat7w.exe monitor application found in <TOMCAT_HOME>/bin.Tomcat7w is a GUI application for monitoring and configuring Tomcat services. If you named your service Mytomcat7 you will need to rename this file to Mytomcat7.exe before running it
In the "Startup" tab change the value of "Mode" from jvm to Java
Do the same in the "Shutdown" tab
The easiest way to setup a tomcat Windows service is to use the Tomcat Windows Service Installer found on the same page as tomcat downloads.
http://tomcat.apache.org/download-70.cgi
However, if you are unable to use this installer. Then you can as you have try the above. The service created 'Mytomcat7' can be managed by the tomcat7w.exe file, after you rename it to 'Mytomcat7w.exe'.
Run the renamed file and you will be able to see all options for the service. The error you are seeing is likely related to an invalid JVM location or JVM mode not set to auto.
Details of settings found here:
http://tomcat.apache.org/tomcat-7.0-doc/windows-service-howto.html
I would just use the installer, it will make your life easier.
http://mirror.ox.ac.uk/sites/rsync.apache.org/tomcat/tomcat-7/v7.0.50/bin/apache-tomcat-7.0.50.exe
I'm using the following on Windows 7:
neo4j-community-1.9.2
Java 7 Update 25
I have Windows Firewall disabled.
When I start Neo4j.bat, both as Administrator and normally, I get the following message:
c:\Tools\neo4j\bin>Neo4j.bat
28/07/13 9:34:27 PM org.neo4j.server.AbstractNeoServer INFO: Setting startup tim
eout to: 120000ms based on -1
A blank Java console window pops up, no messages, then the window disappears after a minute or so.
When I go to http://localhost:7474/, I just get a server not found error.
If I try to install it as a service, the service wouldn't start.
Any ideas what I need to do to start Neo4j? I see here that Neo4j 1.9 does support Java 7:
http://blog.neo4j.org/2013/03/neo4j-19m05-released-wrapping-up.html
base.bat correctly points to windows-service-wrapper-5.jar, so not the windows-service-wrapper-*.jar problem that some people have had in the past. It would be helpful if it outputted an error message.
I just tried it with neo4j 2.0 milestone, and it didn't make any difference. The Java window pops up with no messages, http://localhost:7474/ gets a server not found error, then the Java window closes after a minute or two.
I added JAVA_HOME and JRE_HOME system variables, made no difference. I think I would get an error if Neo4j was not able to locate Java anyway.
I've fixed it.
With help from Neo4j's Google Group, I looked at the logs in data/logs/*.log and data/graph.db/messages.log, and found the following exception:
Caused by: java.rmi.server.ExportException: Port already in use: 1337; nested exception is:
java.net.BindException: Address already in use: JVM_Bind
Once I disabled my other service that uses that port, Neo4j's web admin at http://localhost:7474 worked. I then found out port 1337 is used by Neo4j's remote shell, I disabled it by adding enable_remote_shell = false to neo4j.properties, then I was able to have both Neo4j and my other service running.
I'm using the version 2.2.1 community edition of Neo4j on Windows 7, Java 1.8 update 45
In my case the log file messages.log was under default.graphdb directory. In there, you'll see the root cause of the problem.
When i tried to run an application on jdeveloper, the server wont start and it shows the following message
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
C:\Users\Ayodeji.Ayodeji\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
\IBM\WebSphere was unexpected at this time.
Process exited.
Finally i got the problem solved. I tried to locate the startWebLogic.cmd file in the specified path, and went through the file, then i realise its trying to access my classpath, so on checking my classpath from the environment variables, its has only entries to Websphere so i deleted the entry, restarted JDeveloper and my server is up and running.
I had the same issue with Eclipse setting Weblogic, I was trying to start the Server, but got the same error.
\IBM\WebSphere was unexpected at this time.
It was due to Window 7 folder security issue. As soon as I realized that, I close eclipse and start eclipse with Administration Right. That resolved the issue.
1.Go to
C:\Users\Ayodeji.Ayodeji\AppData\Roaming\JDeveloper\
Ayodeji.Ayodeji should be your PC User name
then change
system11.1.2.3.39.62.76.1
Folder name to another name and run.
When I try to debug any project in Java EE INDIGO (64 bit) in win 7 and place a breakpoint somewhere the program acts as expected but when I hit f6 or f5 to go further eclipse throws an error which reads (I have Spring installed):
An internal error occurred during: "JDI Event Dispatch".
com.springsource.sts.groovy.debug.core.GroovyDebugProvider.isAlwaysInteretingLaunch()Z
(No typo, "Z" does appear)
Now I can't debug any program because it always gives this error. Can anyone help?
From the eclipse error log:
!MESSAGE com.springsource.sts.groovy.debug.core.GroovyDebugProvider.isAlwaysInteretingLaunch()Z
!STACK 0
java.lang.AbstractMethodError: com.springsource.sts.groovy.debug.core.GroovyDebugProvider.isAlwaysInteretingLaunch()Z
at org.eclipse.contribution.jdt.debug.DebugHooksAspect.isInterestingLaunch(DebugHooksAspect.aj:253)
at org.eclipse.contribution.jdt.debug.DebugHooksAspect.ajc$inlineAccessMethod$org_eclipse_contribution_jdt_debug_DebugHooksAspect$org_eclipse_contribution_jdt_debug_DebugHooksAspect$isInterestingLaunch(DebugHooksAspect.aj:1)
at org.eclipse.jdt.internal.debug.core.model.JDIDebugTarget.getStepFilters_aroundBody1$advice(JDIDebugTarget.java:195)
at org.eclipse.jdt.internal.debug.core.model.JDIDebugTarget.getStepFilters(JDIDebugTarget.java:1)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.attachFiltersToStepRequest(JDIThread.java:2154)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.createStepRequest(JDIThread.java:2065)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.createStepRequest(JDIThread.java:2040)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.step(JDIThread.java:1989)
at org.eclipse.jdt.internal.debug.core.model.JDIThread.stepOver(JDIThread.java:1412)
at org.eclipse.jdt.internal.debug.core.model.JDIStackFrame.stepOver(JDIStackFrame.java:418)
at org.eclipse.debug.internal.core.commands.StepOverCommand.step(StepOverCommand.java:27)
at org.eclipse.debug.internal.core.commands.StepCommand.doExecute(StepCommand.java:34)
at org.eclipse.debug.core.commands.AbstractDebugCommand$1.run(AbstractDebugCommand.java:213)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
This seems to be a similar bug to this bug in codehaus jira (see comments section). I was able to switch back to an older eclipse installation (from two weeks ago) to get rid of the current problem and will upgrade to Eclipse 3.7 as soon as time permits.
As crazy as this sounds, I too was getting this error when debugging an Android App and trying to step into a specific method, and resolved it by renaming the method I was trying to step into.
I had tried:
completely reinstalling the app
cleaning in Eclipse
reboot of device (phone), OS, and restart of Eclipse
increasing debug timeouts in Preferences | Java | Debug
My method was called "getMessageInfoFromDb"... and was in a class that didn't extend anything, but implemented Serializable ;-)
Try disabling simple step filtering, especially filtering of simple getters.
delete the Temp folder from yourlocalpath\domainfolder\server\AdminServer
domains\base_domain\servers\AdminServer
Have you done any DB import twice or more time on the same DB that you use for the application in which you are running in debug mode. Because I am also getting similar error with the caption JDI while starting Application Server with deployed .ear in Eclipse based IDE as a popup.
When db is imported twice user created tables gets imported if it's been tried in the same kind of databases. But Oracle App & System Specific tables throws error in process of importing. And some crash in that....
I hope this is what scenario yours as well....
In my scenario I had imported Oracle db from UNIX environment to Oracle XE in Windows environment.