Related
So I have a double set to equal 1234, I want to move a decimal place over to make it 12.34
So to do this I multiply .1 to 1234 two times, kinda like this
double x = 1234;
for(int i=1;i<=2;i++)
{
x = x*.1;
}
System.out.println(x);
This will print the result, "12.340000000000002"
Is there a way, without simply formatting it to two decimal places, to have the double store 12.34 correctly?
If you use double or float, you should use rounding or expect to see some rounding errors. If you can't do this, use BigDecimal.
The problem you have is that 0.1 is not an exact representation, and by performing the calculation twice, you are compounding that error.
However, 100 can be represented accurately, so try:
double x = 1234;
x /= 100;
System.out.println(x);
which prints:
12.34
This works because Double.toString(d) performs a small amount of rounding on your behalf, but it is not much. If you are wondering what it might look like without rounding:
System.out.println(new BigDecimal(0.1));
System.out.println(new BigDecimal(x));
prints:
0.100000000000000005551115123125782702118158340454101562
12.339999999999999857891452847979962825775146484375
In short, rounding is unavoidable for sensible answers in floating point whether you are doing this explicitly or not.
Note: x / 100 and x * 0.01 are not exactly the same when it comes to rounding error. This is because the round error for the first expression depends on the values of x, whereas the 0.01 in the second has a fixed round error.
for(int i=0;i<200;i++) {
double d1 = (double) i / 100;
double d2 = i * 0.01;
if (d1 != d2)
System.out.println(d1 + " != "+d2);
}
prints
0.35 != 0.35000000000000003
0.41 != 0.41000000000000003
0.47 != 0.47000000000000003
0.57 != 0.5700000000000001
0.69 != 0.6900000000000001
0.7 != 0.7000000000000001
0.82 != 0.8200000000000001
0.83 != 0.8300000000000001
0.94 != 0.9400000000000001
0.95 != 0.9500000000000001
1.13 != 1.1300000000000001
1.14 != 1.1400000000000001
1.15 != 1.1500000000000001
1.38 != 1.3800000000000001
1.39 != 1.3900000000000001
1.4 != 1.4000000000000001
1.63 != 1.6300000000000001
1.64 != 1.6400000000000001
1.65 != 1.6500000000000001
1.66 != 1.6600000000000001
1.88 != 1.8800000000000001
1.89 != 1.8900000000000001
1.9 != 1.9000000000000001
1.91 != 1.9100000000000001
NOTE: This has nothing to do with randomness in your system (or your power supply). This is due to a representation error, which will produce the same outcome every time. The precision of double is limited and in base 2 rather than base 10, so numbers which can be precisely represented in decimal often cann't be precisely represented in base 2.
No - if you want to store decimal values accurately, use BigDecimal. double simply can't represent a number like 0.1 exactly, any more than you can write the value of a third exactly with a finite number of decimal digits.
if it's just formatting, try printf
double x = 1234;
for(int i=1;i<=2;i++)
{
x = x*.1;
}
System.out.printf("%.2f",x);
output
12.34
In financial software it is common to use integers for pennies. In school, we were taught how to use fixed-point instead of floating, but that is usually powers of two. Storing pennies in integers might be called "fixed point" as well.
int i=1234;
printf("%d.%02d\r\n",i/100,i%100);
In class, we were asked in general what numbers can be exactly represented in a base.
For base=p1^n1*p2^n2... you can represent any N where N=n*p1^m1*p2^m2.
Let base=14=2^1*7^1... you can represent 1/7 1/14 1/28 1/49 but not 1/3
I know about financial software -- I converted Ticketmaster's financial reports from VAX asm to PASCAL. They had their own formatln() with codes for pennies. The reason for the conversion was 32 bit integers were no longer enough. +/- 2 billion pennies is $20 million and that overflowed for the World Cup or Olympics, I forgot.
I was sworn to secrecy. Oh well. In academea, if it's good you publish; in industry, you keep it secret.
you can try integer number representation
int i =1234;
int q = i /100;
int r = i % 100;
System.out.printf("%d.%02d",q, r);
This is caused by the way computers store floating-point numbers. They don't do so exactly. As a programmer, you should read this floating-point guide to familiarize yourself with the trials and tribulations of handling floating-point numbers.
Funny that numerous posts mention to use BigDecimal but no-one bothers to give the correct answer based on BigDecimal? Because even with BigDecimal, you can still go wrong, as demonstrated by this code
String numstr = "1234";
System.out.println(new BigDecimal(numstr).movePointLeft(2));
System.out.println(new BigDecimal(numstr).multiply(new BigDecimal(0.01)));
System.out.println(new BigDecimal(numstr).multiply(new BigDecimal("0.01")));
Gives this output
12.34
12.34000000000000025687785232264559454051777720451354980468750
12.34
The BigDecimal constructor specifically mentions that it is better to use String constructor than a numeric constructor. Ultimate precision is also influenced by the optional MathContext.
According to the BigDecimal Javadoc it is possible to create a BigDecimal which is exactly equal to 0.1, provided you use the String constructor.
Yes, there is. With each double operation you may lose accuracy but the amount of accuracy differs for each operation and can be minimized by choosing the right sequence of operations. For example when multiplying set of numbers, it is best to sort set by exponent before multiplying.
Any decent book on number crunching describes this. For example:
http://docs.oracle.com/cd/E19957-01/806-3568/ncg_goldberg.html
And to answer your question:
Use divide instead of multiply, this way you get correct result.
double x = 1234;
for(int i=1;i<=2;i++)
{
x = x / 10.0;
}
System.out.println(x);
No, as Java floating point types (indeed all floating point types) are a trade-off between size and precision. While they're very useful for a lot of tasks, if you need arbitrary precision, you should use BigDecimal.
public class doublePrecision {
public static void main(String[] args) {
double total = 0;
total += 5.6;
total += 5.8;
System.out.println(total);
}
}
The above code prints:
11.399999999999
How would I get this to just print (or be able to use it as) 11.4?
As others have mentioned, you'll probably want to use the BigDecimal class, if you want to have an exact representation of 11.4.
Now, a little explanation into why this is happening:
The float and double primitive types in Java are floating point numbers, where the number is stored as a binary representation of a fraction and a exponent.
More specifically, a double-precision floating point value such as the double type is a 64-bit value, where:
1 bit denotes the sign (positive or negative).
11 bits for the exponent.
52 bits for the significant digits (the fractional part as a binary).
These parts are combined to produce a double representation of a value.
(Source: Wikipedia: Double precision)
For a detailed description of how floating point values are handled in Java, see the Section 4.2.3: Floating-Point Types, Formats, and Values of the Java Language Specification.
The byte, char, int, long types are fixed-point numbers, which are exact representions of numbers. Unlike fixed point numbers, floating point numbers will some times (safe to assume "most of the time") not be able to return an exact representation of a number. This is the reason why you end up with 11.399999999999 as the result of 5.6 + 5.8.
When requiring a value that is exact, such as 1.5 or 150.1005, you'll want to use one of the fixed-point types, which will be able to represent the number exactly.
As has been mentioned several times already, Java has a BigDecimal class which will handle very large numbers and very small numbers.
From the Java API Reference for the BigDecimal class:
Immutable,
arbitrary-precision signed decimal
numbers. A BigDecimal consists of an
arbitrary precision integer unscaled
value and a 32-bit integer scale. If
zero or positive, the scale is the
number of digits to the right of the
decimal point. If negative, the
unscaled value of the number is
multiplied by ten to the power of the
negation of the scale. The value of
the number represented by the
BigDecimal is therefore (unscaledValue
× 10^-scale).
There has been many questions on Stack Overflow relating to the matter of floating point numbers and its precision. Here is a list of related questions that may be of interest:
Why do I see a double variable initialized to some value like 21.4 as 21.399999618530273?
How to print really big numbers in C++
How is floating point stored? When does it matter?
Use Float or Decimal for Accounting Application Dollar Amount?
If you really want to get down to the nitty gritty details of floating point numbers, take a look at What Every Computer Scientist Should Know About Floating-Point Arithmetic.
When you input a double number, for example, 33.33333333333333, the value you get is actually the closest representable double-precision value, which is exactly:
33.3333333333333285963817615993320941925048828125
Dividing that by 100 gives:
0.333333333333333285963817615993320941925048828125
which also isn't representable as a double-precision number, so again it is rounded to the nearest representable value, which is exactly:
0.3333333333333332593184650249895639717578887939453125
When you print this value out, it gets rounded yet again to 17 decimal digits, giving:
0.33333333333333326
If you just want to process values as fractions, you can create a Fraction class which holds a numerator and denominator field.
Write methods for add, subtract, multiply and divide as well as a toDouble method. This way you can avoid floats during calculations.
EDIT: Quick implementation,
public class Fraction {
private int numerator;
private int denominator;
public Fraction(int n, int d){
numerator = n;
denominator = d;
}
public double toDouble(){
return ((double)numerator)/((double)denominator);
}
public static Fraction add(Fraction a, Fraction b){
if(a.denominator != b.denominator){
double aTop = b.denominator * a.numerator;
double bTop = a.denominator * b.numerator;
return new Fraction(aTop + bTop, a.denominator * b.denominator);
}
else{
return new Fraction(a.numerator + b.numerator, a.denominator);
}
}
public static Fraction divide(Fraction a, Fraction b){
return new Fraction(a.numerator * b.denominator, a.denominator * b.numerator);
}
public static Fraction multiply(Fraction a, Fraction b){
return new Fraction(a.numerator * b.numerator, a.denominator * b.denominator);
}
public static Fraction subtract(Fraction a, Fraction b){
if(a.denominator != b.denominator){
double aTop = b.denominator * a.numerator;
double bTop = a.denominator * b.numerator;
return new Fraction(aTop-bTop, a.denominator*b.denominator);
}
else{
return new Fraction(a.numerator - b.numerator, a.denominator);
}
}
}
Observe that you'd have the same problem if you used limited-precision decimal arithmetic, and wanted to deal with 1/3: 0.333333333 * 3 is 0.999999999, not 1.00000000.
Unfortunately, 5.6, 5.8 and 11.4 just aren't round numbers in binary, because they involve fifths. So the float representation of them isn't exact, just as 0.3333 isn't exactly 1/3.
If all the numbers you use are non-recurring decimals, and you want exact results, use BigDecimal. Or as others have said, if your values are like money in the sense that they're all a multiple of 0.01, or 0.001, or something, then multiply everything by a fixed power of 10 and use int or long (addition and subtraction are trivial: watch out for multiplication).
However, if you are happy with binary for the calculation, but you just want to print things out in a slightly friendlier format, try java.util.Formatter or String.format. In the format string specify a precision less than the full precision of a double. To 10 significant figures, say, 11.399999999999 is 11.4, so the result will be almost as accurate and more human-readable in cases where the binary result is very close to a value requiring only a few decimal places.
The precision to specify depends a bit on how much maths you've done with your numbers - in general the more you do, the more error will accumulate, but some algorithms accumulate it much faster than others (they're called "unstable" as opposed to "stable" with respect to rounding errors). If all you're doing is adding a few values, then I'd guess that dropping just one decimal place of precision will sort things out. Experiment.
You may want to look into using java's java.math.BigDecimal class if you really need precision math. Here is a good article from Oracle/Sun on the case for BigDecimal. While you can never represent 1/3 as someone mentioned, you can have the power to decide exactly how precise you want the result to be. setScale() is your friend.. :)
Ok, because I have way too much time on my hands at the moment here is a code example that relates to your question:
import java.math.BigDecimal;
/**
* Created by a wonderful programmer known as:
* Vincent Stoessel
* xaymaca#gmail.com
* on Mar 17, 2010 at 11:05:16 PM
*/
public class BigUp {
public static void main(String[] args) {
BigDecimal first, second, result ;
first = new BigDecimal("33.33333333333333") ;
second = new BigDecimal("100") ;
result = first.divide(second);
System.out.println("result is " + result);
//will print : result is 0.3333333333333333
}
}
and to plug my new favorite language, Groovy, here is a neater example of the same thing:
import java.math.BigDecimal
def first = new BigDecimal("33.33333333333333")
def second = new BigDecimal("100")
println "result is " + first/second // will print: result is 0.33333333333333
Pretty sure you could've made that into a three line example. :)
If you want exact precision, use BigDecimal. Otherwise, you can use ints multiplied by 10 ^ whatever precision you want.
As others have noted, not all decimal values can be represented as binary since decimal is based on powers of 10 and binary is based on powers of two.
If precision matters, use BigDecimal, but if you just want friendly output:
System.out.printf("%.2f\n", total);
Will give you:
11.40
You're running up against the precision limitation of type double.
Java.Math has some arbitrary-precision arithmetic facilities.
You can't, because 7.3 doesn't have a finite representation in binary. The closest you can get is 2054767329987789/2**48 = 7.3+1/1407374883553280.
Take a look at http://docs.python.org/tutorial/floatingpoint.html for a further explanation. (It's on the Python website, but Java and C++ have the same "problem".)
The solution depends on what exactly your problem is:
If it's that you just don't like seeing all those noise digits, then fix your string formatting. Don't display more than 15 significant digits (or 7 for float).
If it's that the inexactness of your numbers is breaking things like "if" statements, then you should write if (abs(x - 7.3) < TOLERANCE) instead of if (x == 7.3).
If you're working with money, then what you probably really want is decimal fixed point. Store an integer number of cents or whatever the smallest unit of your currency is.
(VERY UNLIKELY) If you need more than 53 significant bits (15-16 significant digits) of precision, then use a high-precision floating-point type, like BigDecimal.
private void getRound() {
// this is very simple and interesting
double a = 5, b = 3, c;
c = a / b;
System.out.println(" round val is " + c);
// round val is : 1.6666666666666667
// if you want to only two precision point with double we
// can use formate option in String
// which takes 2 parameters one is formte specifier which
// shows dicimal places another double value
String s = String.format("%.2f", c);
double val = Double.parseDouble(s);
System.out.println(" val is :" + val);
// now out put will be : val is :1.67
}
Use java.math.BigDecimal
Doubles are binary fractions internally, so they sometimes cannot represent decimal fractions to the exact decimal.
/*
0.8 1.2
0.7 1.3
0.7000000000000002 2.3
0.7999999999999998 4.2
*/
double adjust = fToInt + 1.0 - orgV;
// The following two lines works for me.
String s = String.format("%.2f", adjust);
double val = Double.parseDouble(s);
System.out.println(val); // output: 0.8, 0.7, 0.7, 0.8
Doubles are approximations of the decimal numbers in your Java source. You're seeing the consequence of the mismatch between the double (which is a binary-coded value) and your source (which is decimal-coded).
Java's producing the closest binary approximation. You can use the java.text.DecimalFormat to display a better-looking decimal value.
Short answer: Always use BigDecimal and make sure you are using the constructor with String argument, not the double one.
Back to your example, the following code will print 11.4, as you wish.
public class doublePrecision {
public static void main(String[] args) {
BigDecimal total = new BigDecimal("0");
total = total.add(new BigDecimal("5.6"));
total = total.add(new BigDecimal("5.8"));
System.out.println(total);
}
}
Multiply everything by 100 and store it in a long as cents.
Computers store numbers in binary and can't actually represent numbers such as 33.333333333 or 100.0 exactly. This is one of the tricky things about using doubles. You will have to just round the answer before showing it to a user. Luckily in most applications, you don't need that many decimal places anyhow.
Floating point numbers differ from real numbers in that for any given floating point number there is a next higher floating point number. Same as integers. There's no integer between 1 and 2.
There's no way to represent 1/3 as a float. There's a float below it and there's a float above it, and there's a certain distance between them. And 1/3 is in that space.
Apfloat for Java claims to work with arbitrary precision floating point numbers, but I've never used it. Probably worth a look.
http://www.apfloat.org/apfloat_java/
A similar question was asked here before
Java floating point high precision library
Use a BigDecimal. It even lets you specify rounding rules (like ROUND_HALF_EVEN, which will minimize statistical error by rounding to the even neighbor if both are the same distance; i.e. both 1.5 and 2.5 round to 2).
Why not use the round() method from Math class?
// The number of 0s determines how many digits you want after the floating point
// (here one digit)
total = (double)Math.round(total * 10) / 10;
System.out.println(total); // prints 11.4
Check out BigDecimal, it handles problems dealing with floating point arithmetic like that.
The new call would look like this:
term[number].coefficient.add(co);
Use setScale() to set the number of decimal place precision to be used.
If you have no choice other than using double values, can use the below code.
public static double sumDouble(double value1, double value2) {
double sum = 0.0;
String value1Str = Double.toString(value1);
int decimalIndex = value1Str.indexOf(".");
int value1Precision = 0;
if (decimalIndex != -1) {
value1Precision = (value1Str.length() - 1) - decimalIndex;
}
String value2Str = Double.toString(value2);
decimalIndex = value2Str.indexOf(".");
int value2Precision = 0;
if (decimalIndex != -1) {
value2Precision = (value2Str.length() - 1) - decimalIndex;
}
int maxPrecision = value1Precision > value2Precision ? value1Precision : value2Precision;
sum = value1 + value2;
String s = String.format("%." + maxPrecision + "f", sum);
sum = Double.parseDouble(s);
return sum;
}
You can Do the Following!
System.out.println(String.format("%.12f", total));
if you change the decimal value here %.12f
So far I understand it as main goal to get correct double from wrong double.
Look for my solution how to get correct value from "approximate" wrong value - if it is real floating point it rounds last digit - counted from all digits - counting before dot and try to keep max possible digits after dot - hope that it is enough precision for most cases:
public static double roundError(double value) {
BigDecimal valueBigDecimal = new BigDecimal(Double.toString(value));
String valueString = valueBigDecimal.toPlainString();
if (!valueString.contains(".")) return value;
String[] valueArray = valueString.split("[.]");
int places = 16;
places -= valueArray[0].length();
if ("56789".contains("" + valueArray[0].charAt(valueArray[0].length() - 1))) places--;
//System.out.println("Rounding " + value + "(" + valueString + ") to " + places + " places");
return valueBigDecimal.setScale(places, RoundingMode.HALF_UP).doubleValue();
}
I know it is long code, sure not best, maybe someone can fix it to be more elegant. Anyway it is working, see examples:
roundError(5.6+5.8) = 11.399999999999999 = 11.4
roundError(0.4-0.3) = 0.10000000000000003 = 0.1
roundError(37235.137567000005) = 37235.137567
roundError(1/3) 0.3333333333333333 = 0.333333333333333
roundError(3723513756.7000005) = 3.7235137567E9 (3723513756.7)
roundError(3723513756123.7000005) = 3.7235137561237E12 (3723513756123.7)
roundError(372351375612.7000005) = 3.723513756127E11 (372351375612.7)
roundError(1.7976931348623157) = 1.797693134862316
Do not waste your efford using BigDecimal. In 99.99999% cases you don't need it. java double type is of cource approximate but in almost all cases, it is sufficiently precise. Mind that your have an error at 14th significant digit. This is really negligible!
To get nice output use:
System.out.printf("%.2f\n", total);
public class doublePrecision {
public static void main(String[] args) {
double total = 0;
total += 5.6;
total += 5.8;
System.out.println(total);
}
}
The above code prints:
11.399999999999
How would I get this to just print (or be able to use it as) 11.4?
As others have mentioned, you'll probably want to use the BigDecimal class, if you want to have an exact representation of 11.4.
Now, a little explanation into why this is happening:
The float and double primitive types in Java are floating point numbers, where the number is stored as a binary representation of a fraction and a exponent.
More specifically, a double-precision floating point value such as the double type is a 64-bit value, where:
1 bit denotes the sign (positive or negative).
11 bits for the exponent.
52 bits for the significant digits (the fractional part as a binary).
These parts are combined to produce a double representation of a value.
(Source: Wikipedia: Double precision)
For a detailed description of how floating point values are handled in Java, see the Section 4.2.3: Floating-Point Types, Formats, and Values of the Java Language Specification.
The byte, char, int, long types are fixed-point numbers, which are exact representions of numbers. Unlike fixed point numbers, floating point numbers will some times (safe to assume "most of the time") not be able to return an exact representation of a number. This is the reason why you end up with 11.399999999999 as the result of 5.6 + 5.8.
When requiring a value that is exact, such as 1.5 or 150.1005, you'll want to use one of the fixed-point types, which will be able to represent the number exactly.
As has been mentioned several times already, Java has a BigDecimal class which will handle very large numbers and very small numbers.
From the Java API Reference for the BigDecimal class:
Immutable,
arbitrary-precision signed decimal
numbers. A BigDecimal consists of an
arbitrary precision integer unscaled
value and a 32-bit integer scale. If
zero or positive, the scale is the
number of digits to the right of the
decimal point. If negative, the
unscaled value of the number is
multiplied by ten to the power of the
negation of the scale. The value of
the number represented by the
BigDecimal is therefore (unscaledValue
× 10^-scale).
There has been many questions on Stack Overflow relating to the matter of floating point numbers and its precision. Here is a list of related questions that may be of interest:
Why do I see a double variable initialized to some value like 21.4 as 21.399999618530273?
How to print really big numbers in C++
How is floating point stored? When does it matter?
Use Float or Decimal for Accounting Application Dollar Amount?
If you really want to get down to the nitty gritty details of floating point numbers, take a look at What Every Computer Scientist Should Know About Floating-Point Arithmetic.
When you input a double number, for example, 33.33333333333333, the value you get is actually the closest representable double-precision value, which is exactly:
33.3333333333333285963817615993320941925048828125
Dividing that by 100 gives:
0.333333333333333285963817615993320941925048828125
which also isn't representable as a double-precision number, so again it is rounded to the nearest representable value, which is exactly:
0.3333333333333332593184650249895639717578887939453125
When you print this value out, it gets rounded yet again to 17 decimal digits, giving:
0.33333333333333326
If you just want to process values as fractions, you can create a Fraction class which holds a numerator and denominator field.
Write methods for add, subtract, multiply and divide as well as a toDouble method. This way you can avoid floats during calculations.
EDIT: Quick implementation,
public class Fraction {
private int numerator;
private int denominator;
public Fraction(int n, int d){
numerator = n;
denominator = d;
}
public double toDouble(){
return ((double)numerator)/((double)denominator);
}
public static Fraction add(Fraction a, Fraction b){
if(a.denominator != b.denominator){
double aTop = b.denominator * a.numerator;
double bTop = a.denominator * b.numerator;
return new Fraction(aTop + bTop, a.denominator * b.denominator);
}
else{
return new Fraction(a.numerator + b.numerator, a.denominator);
}
}
public static Fraction divide(Fraction a, Fraction b){
return new Fraction(a.numerator * b.denominator, a.denominator * b.numerator);
}
public static Fraction multiply(Fraction a, Fraction b){
return new Fraction(a.numerator * b.numerator, a.denominator * b.denominator);
}
public static Fraction subtract(Fraction a, Fraction b){
if(a.denominator != b.denominator){
double aTop = b.denominator * a.numerator;
double bTop = a.denominator * b.numerator;
return new Fraction(aTop-bTop, a.denominator*b.denominator);
}
else{
return new Fraction(a.numerator - b.numerator, a.denominator);
}
}
}
Observe that you'd have the same problem if you used limited-precision decimal arithmetic, and wanted to deal with 1/3: 0.333333333 * 3 is 0.999999999, not 1.00000000.
Unfortunately, 5.6, 5.8 and 11.4 just aren't round numbers in binary, because they involve fifths. So the float representation of them isn't exact, just as 0.3333 isn't exactly 1/3.
If all the numbers you use are non-recurring decimals, and you want exact results, use BigDecimal. Or as others have said, if your values are like money in the sense that they're all a multiple of 0.01, or 0.001, or something, then multiply everything by a fixed power of 10 and use int or long (addition and subtraction are trivial: watch out for multiplication).
However, if you are happy with binary for the calculation, but you just want to print things out in a slightly friendlier format, try java.util.Formatter or String.format. In the format string specify a precision less than the full precision of a double. To 10 significant figures, say, 11.399999999999 is 11.4, so the result will be almost as accurate and more human-readable in cases where the binary result is very close to a value requiring only a few decimal places.
The precision to specify depends a bit on how much maths you've done with your numbers - in general the more you do, the more error will accumulate, but some algorithms accumulate it much faster than others (they're called "unstable" as opposed to "stable" with respect to rounding errors). If all you're doing is adding a few values, then I'd guess that dropping just one decimal place of precision will sort things out. Experiment.
You may want to look into using java's java.math.BigDecimal class if you really need precision math. Here is a good article from Oracle/Sun on the case for BigDecimal. While you can never represent 1/3 as someone mentioned, you can have the power to decide exactly how precise you want the result to be. setScale() is your friend.. :)
Ok, because I have way too much time on my hands at the moment here is a code example that relates to your question:
import java.math.BigDecimal;
/**
* Created by a wonderful programmer known as:
* Vincent Stoessel
* xaymaca#gmail.com
* on Mar 17, 2010 at 11:05:16 PM
*/
public class BigUp {
public static void main(String[] args) {
BigDecimal first, second, result ;
first = new BigDecimal("33.33333333333333") ;
second = new BigDecimal("100") ;
result = first.divide(second);
System.out.println("result is " + result);
//will print : result is 0.3333333333333333
}
}
and to plug my new favorite language, Groovy, here is a neater example of the same thing:
import java.math.BigDecimal
def first = new BigDecimal("33.33333333333333")
def second = new BigDecimal("100")
println "result is " + first/second // will print: result is 0.33333333333333
Pretty sure you could've made that into a three line example. :)
If you want exact precision, use BigDecimal. Otherwise, you can use ints multiplied by 10 ^ whatever precision you want.
As others have noted, not all decimal values can be represented as binary since decimal is based on powers of 10 and binary is based on powers of two.
If precision matters, use BigDecimal, but if you just want friendly output:
System.out.printf("%.2f\n", total);
Will give you:
11.40
You're running up against the precision limitation of type double.
Java.Math has some arbitrary-precision arithmetic facilities.
You can't, because 7.3 doesn't have a finite representation in binary. The closest you can get is 2054767329987789/2**48 = 7.3+1/1407374883553280.
Take a look at http://docs.python.org/tutorial/floatingpoint.html for a further explanation. (It's on the Python website, but Java and C++ have the same "problem".)
The solution depends on what exactly your problem is:
If it's that you just don't like seeing all those noise digits, then fix your string formatting. Don't display more than 15 significant digits (or 7 for float).
If it's that the inexactness of your numbers is breaking things like "if" statements, then you should write if (abs(x - 7.3) < TOLERANCE) instead of if (x == 7.3).
If you're working with money, then what you probably really want is decimal fixed point. Store an integer number of cents or whatever the smallest unit of your currency is.
(VERY UNLIKELY) If you need more than 53 significant bits (15-16 significant digits) of precision, then use a high-precision floating-point type, like BigDecimal.
private void getRound() {
// this is very simple and interesting
double a = 5, b = 3, c;
c = a / b;
System.out.println(" round val is " + c);
// round val is : 1.6666666666666667
// if you want to only two precision point with double we
// can use formate option in String
// which takes 2 parameters one is formte specifier which
// shows dicimal places another double value
String s = String.format("%.2f", c);
double val = Double.parseDouble(s);
System.out.println(" val is :" + val);
// now out put will be : val is :1.67
}
Use java.math.BigDecimal
Doubles are binary fractions internally, so they sometimes cannot represent decimal fractions to the exact decimal.
/*
0.8 1.2
0.7 1.3
0.7000000000000002 2.3
0.7999999999999998 4.2
*/
double adjust = fToInt + 1.0 - orgV;
// The following two lines works for me.
String s = String.format("%.2f", adjust);
double val = Double.parseDouble(s);
System.out.println(val); // output: 0.8, 0.7, 0.7, 0.8
Doubles are approximations of the decimal numbers in your Java source. You're seeing the consequence of the mismatch between the double (which is a binary-coded value) and your source (which is decimal-coded).
Java's producing the closest binary approximation. You can use the java.text.DecimalFormat to display a better-looking decimal value.
Short answer: Always use BigDecimal and make sure you are using the constructor with String argument, not the double one.
Back to your example, the following code will print 11.4, as you wish.
public class doublePrecision {
public static void main(String[] args) {
BigDecimal total = new BigDecimal("0");
total = total.add(new BigDecimal("5.6"));
total = total.add(new BigDecimal("5.8"));
System.out.println(total);
}
}
Multiply everything by 100 and store it in a long as cents.
Computers store numbers in binary and can't actually represent numbers such as 33.333333333 or 100.0 exactly. This is one of the tricky things about using doubles. You will have to just round the answer before showing it to a user. Luckily in most applications, you don't need that many decimal places anyhow.
Floating point numbers differ from real numbers in that for any given floating point number there is a next higher floating point number. Same as integers. There's no integer between 1 and 2.
There's no way to represent 1/3 as a float. There's a float below it and there's a float above it, and there's a certain distance between them. And 1/3 is in that space.
Apfloat for Java claims to work with arbitrary precision floating point numbers, but I've never used it. Probably worth a look.
http://www.apfloat.org/apfloat_java/
A similar question was asked here before
Java floating point high precision library
Use a BigDecimal. It even lets you specify rounding rules (like ROUND_HALF_EVEN, which will minimize statistical error by rounding to the even neighbor if both are the same distance; i.e. both 1.5 and 2.5 round to 2).
Why not use the round() method from Math class?
// The number of 0s determines how many digits you want after the floating point
// (here one digit)
total = (double)Math.round(total * 10) / 10;
System.out.println(total); // prints 11.4
Check out BigDecimal, it handles problems dealing with floating point arithmetic like that.
The new call would look like this:
term[number].coefficient.add(co);
Use setScale() to set the number of decimal place precision to be used.
If you have no choice other than using double values, can use the below code.
public static double sumDouble(double value1, double value2) {
double sum = 0.0;
String value1Str = Double.toString(value1);
int decimalIndex = value1Str.indexOf(".");
int value1Precision = 0;
if (decimalIndex != -1) {
value1Precision = (value1Str.length() - 1) - decimalIndex;
}
String value2Str = Double.toString(value2);
decimalIndex = value2Str.indexOf(".");
int value2Precision = 0;
if (decimalIndex != -1) {
value2Precision = (value2Str.length() - 1) - decimalIndex;
}
int maxPrecision = value1Precision > value2Precision ? value1Precision : value2Precision;
sum = value1 + value2;
String s = String.format("%." + maxPrecision + "f", sum);
sum = Double.parseDouble(s);
return sum;
}
You can Do the Following!
System.out.println(String.format("%.12f", total));
if you change the decimal value here %.12f
So far I understand it as main goal to get correct double from wrong double.
Look for my solution how to get correct value from "approximate" wrong value - if it is real floating point it rounds last digit - counted from all digits - counting before dot and try to keep max possible digits after dot - hope that it is enough precision for most cases:
public static double roundError(double value) {
BigDecimal valueBigDecimal = new BigDecimal(Double.toString(value));
String valueString = valueBigDecimal.toPlainString();
if (!valueString.contains(".")) return value;
String[] valueArray = valueString.split("[.]");
int places = 16;
places -= valueArray[0].length();
if ("56789".contains("" + valueArray[0].charAt(valueArray[0].length() - 1))) places--;
//System.out.println("Rounding " + value + "(" + valueString + ") to " + places + " places");
return valueBigDecimal.setScale(places, RoundingMode.HALF_UP).doubleValue();
}
I know it is long code, sure not best, maybe someone can fix it to be more elegant. Anyway it is working, see examples:
roundError(5.6+5.8) = 11.399999999999999 = 11.4
roundError(0.4-0.3) = 0.10000000000000003 = 0.1
roundError(37235.137567000005) = 37235.137567
roundError(1/3) 0.3333333333333333 = 0.333333333333333
roundError(3723513756.7000005) = 3.7235137567E9 (3723513756.7)
roundError(3723513756123.7000005) = 3.7235137561237E12 (3723513756123.7)
roundError(372351375612.7000005) = 3.723513756127E11 (372351375612.7)
roundError(1.7976931348623157) = 1.797693134862316
Do not waste your efford using BigDecimal. In 99.99999% cases you don't need it. java double type is of cource approximate but in almost all cases, it is sufficiently precise. Mind that your have an error at 14th significant digit. This is really negligible!
To get nice output use:
System.out.printf("%.2f\n", total);
public class doublePrecision {
public static void main(String[] args) {
double total = 0;
total += 5.6;
total += 5.8;
System.out.println(total);
}
}
The above code prints:
11.399999999999
How would I get this to just print (or be able to use it as) 11.4?
As others have mentioned, you'll probably want to use the BigDecimal class, if you want to have an exact representation of 11.4.
Now, a little explanation into why this is happening:
The float and double primitive types in Java are floating point numbers, where the number is stored as a binary representation of a fraction and a exponent.
More specifically, a double-precision floating point value such as the double type is a 64-bit value, where:
1 bit denotes the sign (positive or negative).
11 bits for the exponent.
52 bits for the significant digits (the fractional part as a binary).
These parts are combined to produce a double representation of a value.
(Source: Wikipedia: Double precision)
For a detailed description of how floating point values are handled in Java, see the Section 4.2.3: Floating-Point Types, Formats, and Values of the Java Language Specification.
The byte, char, int, long types are fixed-point numbers, which are exact representions of numbers. Unlike fixed point numbers, floating point numbers will some times (safe to assume "most of the time") not be able to return an exact representation of a number. This is the reason why you end up with 11.399999999999 as the result of 5.6 + 5.8.
When requiring a value that is exact, such as 1.5 or 150.1005, you'll want to use one of the fixed-point types, which will be able to represent the number exactly.
As has been mentioned several times already, Java has a BigDecimal class which will handle very large numbers and very small numbers.
From the Java API Reference for the BigDecimal class:
Immutable,
arbitrary-precision signed decimal
numbers. A BigDecimal consists of an
arbitrary precision integer unscaled
value and a 32-bit integer scale. If
zero or positive, the scale is the
number of digits to the right of the
decimal point. If negative, the
unscaled value of the number is
multiplied by ten to the power of the
negation of the scale. The value of
the number represented by the
BigDecimal is therefore (unscaledValue
× 10^-scale).
There has been many questions on Stack Overflow relating to the matter of floating point numbers and its precision. Here is a list of related questions that may be of interest:
Why do I see a double variable initialized to some value like 21.4 as 21.399999618530273?
How to print really big numbers in C++
How is floating point stored? When does it matter?
Use Float or Decimal for Accounting Application Dollar Amount?
If you really want to get down to the nitty gritty details of floating point numbers, take a look at What Every Computer Scientist Should Know About Floating-Point Arithmetic.
When you input a double number, for example, 33.33333333333333, the value you get is actually the closest representable double-precision value, which is exactly:
33.3333333333333285963817615993320941925048828125
Dividing that by 100 gives:
0.333333333333333285963817615993320941925048828125
which also isn't representable as a double-precision number, so again it is rounded to the nearest representable value, which is exactly:
0.3333333333333332593184650249895639717578887939453125
When you print this value out, it gets rounded yet again to 17 decimal digits, giving:
0.33333333333333326
If you just want to process values as fractions, you can create a Fraction class which holds a numerator and denominator field.
Write methods for add, subtract, multiply and divide as well as a toDouble method. This way you can avoid floats during calculations.
EDIT: Quick implementation,
public class Fraction {
private int numerator;
private int denominator;
public Fraction(int n, int d){
numerator = n;
denominator = d;
}
public double toDouble(){
return ((double)numerator)/((double)denominator);
}
public static Fraction add(Fraction a, Fraction b){
if(a.denominator != b.denominator){
double aTop = b.denominator * a.numerator;
double bTop = a.denominator * b.numerator;
return new Fraction(aTop + bTop, a.denominator * b.denominator);
}
else{
return new Fraction(a.numerator + b.numerator, a.denominator);
}
}
public static Fraction divide(Fraction a, Fraction b){
return new Fraction(a.numerator * b.denominator, a.denominator * b.numerator);
}
public static Fraction multiply(Fraction a, Fraction b){
return new Fraction(a.numerator * b.numerator, a.denominator * b.denominator);
}
public static Fraction subtract(Fraction a, Fraction b){
if(a.denominator != b.denominator){
double aTop = b.denominator * a.numerator;
double bTop = a.denominator * b.numerator;
return new Fraction(aTop-bTop, a.denominator*b.denominator);
}
else{
return new Fraction(a.numerator - b.numerator, a.denominator);
}
}
}
Observe that you'd have the same problem if you used limited-precision decimal arithmetic, and wanted to deal with 1/3: 0.333333333 * 3 is 0.999999999, not 1.00000000.
Unfortunately, 5.6, 5.8 and 11.4 just aren't round numbers in binary, because they involve fifths. So the float representation of them isn't exact, just as 0.3333 isn't exactly 1/3.
If all the numbers you use are non-recurring decimals, and you want exact results, use BigDecimal. Or as others have said, if your values are like money in the sense that they're all a multiple of 0.01, or 0.001, or something, then multiply everything by a fixed power of 10 and use int or long (addition and subtraction are trivial: watch out for multiplication).
However, if you are happy with binary for the calculation, but you just want to print things out in a slightly friendlier format, try java.util.Formatter or String.format. In the format string specify a precision less than the full precision of a double. To 10 significant figures, say, 11.399999999999 is 11.4, so the result will be almost as accurate and more human-readable in cases where the binary result is very close to a value requiring only a few decimal places.
The precision to specify depends a bit on how much maths you've done with your numbers - in general the more you do, the more error will accumulate, but some algorithms accumulate it much faster than others (they're called "unstable" as opposed to "stable" with respect to rounding errors). If all you're doing is adding a few values, then I'd guess that dropping just one decimal place of precision will sort things out. Experiment.
You may want to look into using java's java.math.BigDecimal class if you really need precision math. Here is a good article from Oracle/Sun on the case for BigDecimal. While you can never represent 1/3 as someone mentioned, you can have the power to decide exactly how precise you want the result to be. setScale() is your friend.. :)
Ok, because I have way too much time on my hands at the moment here is a code example that relates to your question:
import java.math.BigDecimal;
/**
* Created by a wonderful programmer known as:
* Vincent Stoessel
* xaymaca#gmail.com
* on Mar 17, 2010 at 11:05:16 PM
*/
public class BigUp {
public static void main(String[] args) {
BigDecimal first, second, result ;
first = new BigDecimal("33.33333333333333") ;
second = new BigDecimal("100") ;
result = first.divide(second);
System.out.println("result is " + result);
//will print : result is 0.3333333333333333
}
}
and to plug my new favorite language, Groovy, here is a neater example of the same thing:
import java.math.BigDecimal
def first = new BigDecimal("33.33333333333333")
def second = new BigDecimal("100")
println "result is " + first/second // will print: result is 0.33333333333333
Pretty sure you could've made that into a three line example. :)
If you want exact precision, use BigDecimal. Otherwise, you can use ints multiplied by 10 ^ whatever precision you want.
As others have noted, not all decimal values can be represented as binary since decimal is based on powers of 10 and binary is based on powers of two.
If precision matters, use BigDecimal, but if you just want friendly output:
System.out.printf("%.2f\n", total);
Will give you:
11.40
You're running up against the precision limitation of type double.
Java.Math has some arbitrary-precision arithmetic facilities.
You can't, because 7.3 doesn't have a finite representation in binary. The closest you can get is 2054767329987789/2**48 = 7.3+1/1407374883553280.
Take a look at http://docs.python.org/tutorial/floatingpoint.html for a further explanation. (It's on the Python website, but Java and C++ have the same "problem".)
The solution depends on what exactly your problem is:
If it's that you just don't like seeing all those noise digits, then fix your string formatting. Don't display more than 15 significant digits (or 7 for float).
If it's that the inexactness of your numbers is breaking things like "if" statements, then you should write if (abs(x - 7.3) < TOLERANCE) instead of if (x == 7.3).
If you're working with money, then what you probably really want is decimal fixed point. Store an integer number of cents or whatever the smallest unit of your currency is.
(VERY UNLIKELY) If you need more than 53 significant bits (15-16 significant digits) of precision, then use a high-precision floating-point type, like BigDecimal.
private void getRound() {
// this is very simple and interesting
double a = 5, b = 3, c;
c = a / b;
System.out.println(" round val is " + c);
// round val is : 1.6666666666666667
// if you want to only two precision point with double we
// can use formate option in String
// which takes 2 parameters one is formte specifier which
// shows dicimal places another double value
String s = String.format("%.2f", c);
double val = Double.parseDouble(s);
System.out.println(" val is :" + val);
// now out put will be : val is :1.67
}
Use java.math.BigDecimal
Doubles are binary fractions internally, so they sometimes cannot represent decimal fractions to the exact decimal.
/*
0.8 1.2
0.7 1.3
0.7000000000000002 2.3
0.7999999999999998 4.2
*/
double adjust = fToInt + 1.0 - orgV;
// The following two lines works for me.
String s = String.format("%.2f", adjust);
double val = Double.parseDouble(s);
System.out.println(val); // output: 0.8, 0.7, 0.7, 0.8
Doubles are approximations of the decimal numbers in your Java source. You're seeing the consequence of the mismatch between the double (which is a binary-coded value) and your source (which is decimal-coded).
Java's producing the closest binary approximation. You can use the java.text.DecimalFormat to display a better-looking decimal value.
Short answer: Always use BigDecimal and make sure you are using the constructor with String argument, not the double one.
Back to your example, the following code will print 11.4, as you wish.
public class doublePrecision {
public static void main(String[] args) {
BigDecimal total = new BigDecimal("0");
total = total.add(new BigDecimal("5.6"));
total = total.add(new BigDecimal("5.8"));
System.out.println(total);
}
}
Multiply everything by 100 and store it in a long as cents.
Computers store numbers in binary and can't actually represent numbers such as 33.333333333 or 100.0 exactly. This is one of the tricky things about using doubles. You will have to just round the answer before showing it to a user. Luckily in most applications, you don't need that many decimal places anyhow.
Floating point numbers differ from real numbers in that for any given floating point number there is a next higher floating point number. Same as integers. There's no integer between 1 and 2.
There's no way to represent 1/3 as a float. There's a float below it and there's a float above it, and there's a certain distance between them. And 1/3 is in that space.
Apfloat for Java claims to work with arbitrary precision floating point numbers, but I've never used it. Probably worth a look.
http://www.apfloat.org/apfloat_java/
A similar question was asked here before
Java floating point high precision library
Use a BigDecimal. It even lets you specify rounding rules (like ROUND_HALF_EVEN, which will minimize statistical error by rounding to the even neighbor if both are the same distance; i.e. both 1.5 and 2.5 round to 2).
Why not use the round() method from Math class?
// The number of 0s determines how many digits you want after the floating point
// (here one digit)
total = (double)Math.round(total * 10) / 10;
System.out.println(total); // prints 11.4
Check out BigDecimal, it handles problems dealing with floating point arithmetic like that.
The new call would look like this:
term[number].coefficient.add(co);
Use setScale() to set the number of decimal place precision to be used.
If you have no choice other than using double values, can use the below code.
public static double sumDouble(double value1, double value2) {
double sum = 0.0;
String value1Str = Double.toString(value1);
int decimalIndex = value1Str.indexOf(".");
int value1Precision = 0;
if (decimalIndex != -1) {
value1Precision = (value1Str.length() - 1) - decimalIndex;
}
String value2Str = Double.toString(value2);
decimalIndex = value2Str.indexOf(".");
int value2Precision = 0;
if (decimalIndex != -1) {
value2Precision = (value2Str.length() - 1) - decimalIndex;
}
int maxPrecision = value1Precision > value2Precision ? value1Precision : value2Precision;
sum = value1 + value2;
String s = String.format("%." + maxPrecision + "f", sum);
sum = Double.parseDouble(s);
return sum;
}
You can Do the Following!
System.out.println(String.format("%.12f", total));
if you change the decimal value here %.12f
So far I understand it as main goal to get correct double from wrong double.
Look for my solution how to get correct value from "approximate" wrong value - if it is real floating point it rounds last digit - counted from all digits - counting before dot and try to keep max possible digits after dot - hope that it is enough precision for most cases:
public static double roundError(double value) {
BigDecimal valueBigDecimal = new BigDecimal(Double.toString(value));
String valueString = valueBigDecimal.toPlainString();
if (!valueString.contains(".")) return value;
String[] valueArray = valueString.split("[.]");
int places = 16;
places -= valueArray[0].length();
if ("56789".contains("" + valueArray[0].charAt(valueArray[0].length() - 1))) places--;
//System.out.println("Rounding " + value + "(" + valueString + ") to " + places + " places");
return valueBigDecimal.setScale(places, RoundingMode.HALF_UP).doubleValue();
}
I know it is long code, sure not best, maybe someone can fix it to be more elegant. Anyway it is working, see examples:
roundError(5.6+5.8) = 11.399999999999999 = 11.4
roundError(0.4-0.3) = 0.10000000000000003 = 0.1
roundError(37235.137567000005) = 37235.137567
roundError(1/3) 0.3333333333333333 = 0.333333333333333
roundError(3723513756.7000005) = 3.7235137567E9 (3723513756.7)
roundError(3723513756123.7000005) = 3.7235137561237E12 (3723513756123.7)
roundError(372351375612.7000005) = 3.723513756127E11 (372351375612.7)
roundError(1.7976931348623157) = 1.797693134862316
Do not waste your efford using BigDecimal. In 99.99999% cases you don't need it. java double type is of cource approximate but in almost all cases, it is sufficiently precise. Mind that your have an error at 14th significant digit. This is really negligible!
To get nice output use:
System.out.printf("%.2f\n", total);
So I have a double set to equal 1234, I want to move a decimal place over to make it 12.34
So to do this I multiply .1 to 1234 two times, kinda like this
double x = 1234;
for(int i=1;i<=2;i++)
{
x = x*.1;
}
System.out.println(x);
This will print the result, "12.340000000000002"
Is there a way, without simply formatting it to two decimal places, to have the double store 12.34 correctly?
If you use double or float, you should use rounding or expect to see some rounding errors. If you can't do this, use BigDecimal.
The problem you have is that 0.1 is not an exact representation, and by performing the calculation twice, you are compounding that error.
However, 100 can be represented accurately, so try:
double x = 1234;
x /= 100;
System.out.println(x);
which prints:
12.34
This works because Double.toString(d) performs a small amount of rounding on your behalf, but it is not much. If you are wondering what it might look like without rounding:
System.out.println(new BigDecimal(0.1));
System.out.println(new BigDecimal(x));
prints:
0.100000000000000005551115123125782702118158340454101562
12.339999999999999857891452847979962825775146484375
In short, rounding is unavoidable for sensible answers in floating point whether you are doing this explicitly or not.
Note: x / 100 and x * 0.01 are not exactly the same when it comes to rounding error. This is because the round error for the first expression depends on the values of x, whereas the 0.01 in the second has a fixed round error.
for(int i=0;i<200;i++) {
double d1 = (double) i / 100;
double d2 = i * 0.01;
if (d1 != d2)
System.out.println(d1 + " != "+d2);
}
prints
0.35 != 0.35000000000000003
0.41 != 0.41000000000000003
0.47 != 0.47000000000000003
0.57 != 0.5700000000000001
0.69 != 0.6900000000000001
0.7 != 0.7000000000000001
0.82 != 0.8200000000000001
0.83 != 0.8300000000000001
0.94 != 0.9400000000000001
0.95 != 0.9500000000000001
1.13 != 1.1300000000000001
1.14 != 1.1400000000000001
1.15 != 1.1500000000000001
1.38 != 1.3800000000000001
1.39 != 1.3900000000000001
1.4 != 1.4000000000000001
1.63 != 1.6300000000000001
1.64 != 1.6400000000000001
1.65 != 1.6500000000000001
1.66 != 1.6600000000000001
1.88 != 1.8800000000000001
1.89 != 1.8900000000000001
1.9 != 1.9000000000000001
1.91 != 1.9100000000000001
NOTE: This has nothing to do with randomness in your system (or your power supply). This is due to a representation error, which will produce the same outcome every time. The precision of double is limited and in base 2 rather than base 10, so numbers which can be precisely represented in decimal often cann't be precisely represented in base 2.
No - if you want to store decimal values accurately, use BigDecimal. double simply can't represent a number like 0.1 exactly, any more than you can write the value of a third exactly with a finite number of decimal digits.
if it's just formatting, try printf
double x = 1234;
for(int i=1;i<=2;i++)
{
x = x*.1;
}
System.out.printf("%.2f",x);
output
12.34
In financial software it is common to use integers for pennies. In school, we were taught how to use fixed-point instead of floating, but that is usually powers of two. Storing pennies in integers might be called "fixed point" as well.
int i=1234;
printf("%d.%02d\r\n",i/100,i%100);
In class, we were asked in general what numbers can be exactly represented in a base.
For base=p1^n1*p2^n2... you can represent any N where N=n*p1^m1*p2^m2.
Let base=14=2^1*7^1... you can represent 1/7 1/14 1/28 1/49 but not 1/3
I know about financial software -- I converted Ticketmaster's financial reports from VAX asm to PASCAL. They had their own formatln() with codes for pennies. The reason for the conversion was 32 bit integers were no longer enough. +/- 2 billion pennies is $20 million and that overflowed for the World Cup or Olympics, I forgot.
I was sworn to secrecy. Oh well. In academea, if it's good you publish; in industry, you keep it secret.
you can try integer number representation
int i =1234;
int q = i /100;
int r = i % 100;
System.out.printf("%d.%02d",q, r);
This is caused by the way computers store floating-point numbers. They don't do so exactly. As a programmer, you should read this floating-point guide to familiarize yourself with the trials and tribulations of handling floating-point numbers.
Funny that numerous posts mention to use BigDecimal but no-one bothers to give the correct answer based on BigDecimal? Because even with BigDecimal, you can still go wrong, as demonstrated by this code
String numstr = "1234";
System.out.println(new BigDecimal(numstr).movePointLeft(2));
System.out.println(new BigDecimal(numstr).multiply(new BigDecimal(0.01)));
System.out.println(new BigDecimal(numstr).multiply(new BigDecimal("0.01")));
Gives this output
12.34
12.34000000000000025687785232264559454051777720451354980468750
12.34
The BigDecimal constructor specifically mentions that it is better to use String constructor than a numeric constructor. Ultimate precision is also influenced by the optional MathContext.
According to the BigDecimal Javadoc it is possible to create a BigDecimal which is exactly equal to 0.1, provided you use the String constructor.
Yes, there is. With each double operation you may lose accuracy but the amount of accuracy differs for each operation and can be minimized by choosing the right sequence of operations. For example when multiplying set of numbers, it is best to sort set by exponent before multiplying.
Any decent book on number crunching describes this. For example:
http://docs.oracle.com/cd/E19957-01/806-3568/ncg_goldberg.html
And to answer your question:
Use divide instead of multiply, this way you get correct result.
double x = 1234;
for(int i=1;i<=2;i++)
{
x = x / 10.0;
}
System.out.println(x);
No, as Java floating point types (indeed all floating point types) are a trade-off between size and precision. While they're very useful for a lot of tasks, if you need arbitrary precision, you should use BigDecimal.