How to read a text file into jtextarea in Java Swing - java

Here is my code:
try {
String textLine;
FileReader fr = new FileReader("ad.txt");
BufferedReader reader = new BufferedReader(fr);
while((textLine=reader.readLine()) != null) {
textLine = reader.readLine();
jTextArea1.read(reader, "jTextArea1");
}
}
catch (IOException ioe) {
System.err.println(ioe);
System.exit(1);
}
And my .txt file contains the following:
contig00001 length=586 numreads=4
CGGGAAATTATCcGCGCCTTCACCGCCGCCGGTTCCACCGACGAACGGATACTGCGtGaa
ggCCGCGATCCCGTCggaCGGAAAaCGCCcTGGCCCGGGAaCATACCGTTCGGGCCGCCA
AGTGTTATAGCCGGACCACTTGTCAGAACATTTCCaaTCCGAAGATGTGAGTtCGGAAGg
TAAAAGCCCGACAAGTTGCGCGgTGAATTTACCTTtACcGCACGATATGCGTCCGTATTA
AaGAAAaGTTCGAAATTATCAGTAAGGCCGACCTGAAaGCTGACCGGGAGTTCAACAAAA
TCTGCATCACCcGGgTCACGGTCGAAATTGCTGTACGCGGCGCTGAACGTAAATTCACCC
TTTcTAAGGGTGTCGCcGTCGTAAACCGTAAaCAaGCCGGTAGCGCCGCCCATCGGGCCG
CCGGTACCAACCGTCGGTGCCGTGTTTCTtGCATCATTGTCCGATCGAGCGTTCTCGTCC
GCTTGTGCAAaTCCTGCAaTAGCTAACGTGAAAACGATCAGAGCTGTTGTAAATACTCTA
TAAGCGAGATTCATCACATTCCTCcGCCGAAATAAAAAGTTAATTt
contig00002 length=554 numreads=4
TGCGCCAaCCGCGCTCTtCATAAaTGGGCACTGCTCCCGATGGCCgACTCGGGCGGTTCG
CCATGAGATCTTTGCCtACCcAGgAaCtCACcACCAAGTCTGATTGCTGTGTGTTTtCTT
CAAGTCCCTATTTCTATTCtCTTtAATGGAACCCGTAGGAAACCCGTGTAGGACGCGGGA
aCCGCACTTgAAGGGGGAGGCGCGGGGTACCGGtCCGGGAACGTACGGGTACCGGCGGGG
gAGGGGAGGGGGACCgCTCCGGGAAGGCCAGGGGACGGATTGGGGAAGGgCGGGTACCGA
AGCGGGgAAaTGGGggAaCcGGCGAGAGGGTTCCTCGCTAAGTGGGGGAAATaGGGGAAA
GGTTGACCAGTGGTtCCCcGCTCTCGTAACATGCCTCAGATAGCGCCATCCGCTGTACCT
GGtcaggtcGctggcaacttcggccgagcaggtgaacccgaaaggtgagggtcagtgtga
cacaccaaccgaacaccgacgaggcaagcgtaggagccggcgtggccgcgcccggcggcg
ctgaggactcctcg
But shows the output by skipping the first two lines.
What is the reason for this?

You don't need the while loop, or the readLine method. Just call jtextArea1.read(reader, "jTextArea1")
Edit: update following your comment. If you want to skip all lines starting with >, you will need to read the file manually and then append each line to your textArea.
So something like:
String line;
while ((line = reader.readLine()) != null)
{
if (!line.startsWith(">"))
{
jTextArea.append(line + "\n");
}
}

Use:
FileReader reader = new FileReader("filename.txt");
txtarea.read(reader, "filename.txt"); //Object of JTextArea
You need only the above two lines to read from a file and put it into JTextArea...

The problem must have been solved by the time, yet there's still no answer to the question why the first two lines are skipped.
You create reader and then read the first two lines from the file, remaining lines are loaded into jTextArea1.
Your code:
/* 1 */ while((textLine=reader.readLine())!=null){
/* 2 */ textLine = reader.readLine();
/* 3 */ jTextArea1.read(reader,"jTextArea1");
}
Line 1 reads the first line from the file. Then in the body of while you read the second line from the file at line 2. Line 3 reads the rest of the file into jTextArea1.
On the next iteration of the while loop, reader.readLine() returns null since the file is completely read.
To load text in a JTextComponent use its read method as suggested by Phill and Bhushankumar.
The second parameter to read is not used by JTextArea, so it's safe to pass null. This second parameter is usually used to store to URL of the loaded file to resolve relative references, for example links in an HTMLDocument.

textLine = reader.readLine(); is called twice...
Fixed:
try {
String textLine;
FileReader fr = new FileReader("ad.txt");
BufferedReader reader = new BufferedReader(fr);
while((textLine=reader.readLine()) != null){
// textLine = reader.readLine(); // Remove this line
jTextArea1.read(reader, "jTextArea1");
}
}
catch (IOException ioe) {
System.err.println(ioe);
System.exit(1);
}

Correctly is:
try {
FileReader fr = new FileReader("tablica.txt");
BufferedReader reader = new BufferedReader(fr);
do {
l.read(reader, null);
}
while ((textLine=reader.readLine()) != null)
;
}
catch (IOException ioe) {
System.err.println(ioe);
System.exit(1);
}

Related

Insert into a specific row using CSVwriter in java [duplicate]

This is code i Have written instead of editing a particular line new name gets appened at the last...
please help me out....
PrintWriter writer = new PrintWriter(new BufferedWriter(
new FileWriter("d:\\book.txt", true)));
BufferedReader br = null;
FileReader reader = null;
try {
reader = new FileReader("d:\\book.txt");
br = new BufferedReader(reader);
String line;
System.out.println((";;;;;;;;;;;;;;;;" + request
.getParameter("hname")));
System.out.println(request.getParameter("book"));
while ((line = br.readLine()) != null) {
if (request.getParameter("hname").equals(line)) {
line = line.replace(request.getParameter("hname"),
request.getParameter("book"));
writer.println(line);
writer.close();
}
}
} catch (FileNotFoundException e) {
e.printStackTrace();
}finally{
reader.close();
}
Unless you aren't changing the (byte) length of the line, you need to rewrite the whole file, adding the changed line where appropriate. This is actually just a simple change from your current code. First, initialize your FileWriter without the append (since you don't want to just append to the end of the file, which is what you're doing now).
PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter("d:\\book.txt")));
Then, either read the whole file into memory (if the file is small enough) or else write a temp file as you go and then copy it over when you're done. The second way is more robust, and requires less code changing; just modify your while loop to write every line, modified or not.
// Open a temporary file to write to.
PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter("d:\\book.temp")));
// ... then inside your loop ...
while ((line = br.readLine()) != null) {
if (request.getParameter("hname").equals(line)) {
line = line.replace(request.getParameter("hname"),
request.getParameter("book"));
}
// Always write the line, whether you changed it or not.
writer.println(line);
}
// ... and finally ...
File realName = new File("d:\\book.txt");
realName.delete(); // remove the old file
new File("d:\\book.temp").renameTo(realName); // Rename temp file
Don't forget to close all your file handles when you're done!

Remove a Specific Line From text file

I trying to remove a specific line from a file. But I have a problem in deleting a particular line from the text file. Let's said, my text file I want to remove Blueberry in the file following:
Old List Text file:
Chocolate
Strawberry
Blueberry
Mango
New List Text file:
Chocolate
Strawberry
Mango
I tried to run my Java program, when I input for delete and it didn't remove the line from the text file.
Output:
Please delete:
d
Blueberry
Remove:Blueberry
When I open my text file, it keep on looping with the word "Blueberry" only.
Text file:
Blueberry
Blueberry
Blueberry
Blueberry
Blueberry
Blueberry
Blueberry
Blueberry
My question is how to delete the specific line from the text file?
Here is my Java code:
String input="Please delete: ";
System.out.println(input);
try
{
BufferedReader reader = new BufferedReader
(new InputStreamReader (System.in));
line = reader.readLine();
String inFile="list.txt";
String line = "";
while(!line.equals("x"))
{
switch(line)
{
case "d":
line = reader.readLine();
System.out.println("Remove: " + line);
String lineToRemove="";
FileWriter removeLine=new FileWriter(inFile);
BufferedWriter change=new BufferedWriter(removeLine);
PrintWriter replace=new PrintWriter(change);
while (line != null) {
if (!line.trim().equals(lineToRemove))
{
replace.println(line);
replace.flush();
}
}
replace.close();
change.close();
break;
}
System.out.println(input);
line = reader.readLine();
}
}
catch(Exception e){
System.out.println("Error!");
}
Let's take a quick look at your code...
line = reader.readLine();
//...
while (line != null) {
if (!line.trim().equals(lineToRemove))
{
replace.println(line);
replace.flush();
}
}
Basically, you read the first line of the file and then repeatedly compare it with the lineToRemove, forever. This loop is never going to exit
This is a proof of concept, you will need to modify it to your needs.
Basically, what you need to ensure you're doing, is you're reading each line of the input file until there are no more lines
// All the important information
String inputFileName = "...";
String outputFileName = "...";
String lineToRemove = "...";
// The traps any possible read/write exceptions which might occur
try {
File inputFile = new File(inputFileName);
File outputFile = new File(outputFileName);
// Open the reader/writer, this ensure that's encapsulated
// in a try-with-resource block, automatically closing
// the resources regardless of how the block exists
try (BufferedReader reader = new BufferedReader(new FileReader(inputFile));
BufferedWriter writer = new BufferedWriter(new FileWriter(outputFile))) {
// Read each line from the reader and compare it with
// with the line to remove and write if required
String line = null;
while ((line = reader.readLine()) != null) {
if (!line.equals(lineToRemove)) {
writer.write(line);
writer.newLine();
}
}
}
// This is some magic, because of the compounding try blocks
// this section will only be called if the above try block
// exited without throwing an exception, so we're now safe
// to update the input file
// If you want two files at the end of his process, don't do
// this, this assumes you want to update and replace the
// original file
// Delete the original file, you might consider renaming it
// to some backup file
if (inputFile.delete()) {
// Rename the output file to the input file
if (!outputFile.renameTo(inputFile)) {
throw new IOException("Could not rename " + outputFileName + " to " + inputFileName);
}
} else {
throw new IOException("Could not delete original input file " + inputFileName);
}
} catch (IOException ex) {
// Handle any exceptions
ex.printStackTrace();
}
Have a look at Basic I/O and The try-with-resources Statement for some more details
Reading input from console, reading file and writing to a file needs to be distinguished and done separately. you can not read and write file at the same time. you are not even reading your file. you are just comparing your console input indefinitely in your while loop.In fact, you are not even setting your lineTobeRemoved to the input line. Here is one way of doing it.
Algorithm:
Read the console input (your line to delete) then start reading the file and looking for line to delete by comparing it with your input line. if the lines do not match match then store the read line in a variable otherwise throw this line since you want to delete it.
Once finished reading, start writing the stored lines on the file. Now you will have updated file with one line removed.
public static void main(String args[]) {
String input = "Please delete: ";
System.out.println(input);
try {
BufferedReader reader = new BufferedReader(new InputStreamReader(
System.in));
String line = reader.readLine();
reader.close();
String inFile = "list.txt";
System.out.println("Remove: " + line);
String lineToRemove = line;
StringBuffer newContent = new StringBuffer();
BufferedReader br = new BufferedReader(new FileReader(inFile));
while ((line = br.readLine()) != null) {
if (!line.trim().equals(lineToRemove)) {
newContent.append(line);
newContent.append("\n"); // new line
}
}
br.close();
FileWriter removeLine = new FileWriter(inFile);
BufferedWriter change = new BufferedWriter(removeLine);
PrintWriter replace = new PrintWriter(change);
replace.write(newContent.toString());
replace.close();
}
catch (Exception e) {
e.printStackTrace();
}
}

jTextArea saves only first line of text in text file using BufferedReader?

I am trying to save the multiple line output in a text file from my jTextArea(named as "outputarea" in a code) to my desired path, Everything is OK but the file being saved do not contain the whole output, but only first line oof text. I am using "\n" to break the line in jtextarea while giving multiple line output, does that make any difference or any other problem in this code, This code is just the code on saveAs button, output is coming from another methods I've created. Thanks in Advance!
private void saveAs() {
FileDialog fd = new FileDialog(home.this, "Save", FileDialog.SAVE);
fd.show();
if(fd.getFile()!=null)
{
fn=fd.getFile();
dir=fd.getDirectory();
filename = dir + fn +".txt";
setTitle(filename);
try
{
DataOutputStream d=new DataOutputStream(new FileOutputStream(filename));
holdText = outputarea.getText();
BufferedReader br = new BufferedReader(new StringReader(holdText));
while((holdText = br.readLine())!=null)
{
d.writeBytes(holdText+"\r\n");
d.close();
}
}
catch (Exception e)
{
System.out.println("File not found");
}
outputarea.requestFocus();
save(filename);
}
}
You should put the d.close(); after the completion of while loop, because just after writing the first line in the file using DataOutputStream, you are closing it and you don't let it to fulfill the whole job.
You can see even an error is wrote in your console:
File not found
This is not because it doesn't find your file, it's because in the iterations after the first, it tries to write into a closed stream. So only the first line is wrote then. So change you code like this:
while ((holdText = br.readLine()) != null) {
d.writeBytes(holdText + "\r\n");
}
d.close();
Also I can advise to use a PrintWriter instead of DataOutputStream. Then you can easily change the writeBytes into println method. In this way you don't need to append \r\n manually to each line you write.
Another good hint is to use a try-with-resource (in case you use java 7 or later) or at least a finally block to close your streams either way:
String holdText = outputarea.getText();
try (PrintWriter w = new PrintWriter(new File(filename));
BufferedReader br = new BufferedReader(new StringReader(holdText))) {
while ((holdText = br.readLine()) != null) {
w.println(holdText);
}
} catch (Exception e) {
System.out.println("File not found");
}
Good Luck.

Buffered Reader/Writer flushes files

I'm trying to create a method that replaces every line in my file with a given. Instead it just makes the file empty. Care to take a look and see what is up? Thanks.
try {
FileReader fr = new FileReader(chooser.getSelectedFile());
BufferedReader reader = new BufferedReader(fr);
FileWriter fw = new FileWriter(chooser.getSelectedFile());
BufferedWriter bw = new BufferedWriter(fw);
String line = reader.readLine();
Scanner scan = null;
int i=0;
while (line != null) {
scan = new Scanner(line);
ln = scan.toString() + add;
bw.write(ln);
bw.newLine();
i++;
System.out.println(i + " pass");
line = reader.readLine();
}
reader.close();
bw.close();
} catch (FileNotFoundException e) {
System.out.println("Can't find the file");
} catch (IOException e) {
System.out.println("Dude, it's impossibru to read.");
}
The i in this method is too see how many passes the programme goes through a while loop, in this case 0, it doesn't initiate a while loop at all.
If you want to overwrite the same file with your new lines you should do first all the reading, and then all the writing.
ArrayList<String> lines = new ArrayList<String>();
//start reader, go over each line
while (line != null) {
String newLine = //make changes to line
lines.add(newLine);
}
//close reader
//start writer
//write each line to file
You opened file in replace mode, your FileWriter will empty file before first line will be written. Use FileWriter(file,true) if you want to append.
Second problem is you are reading and writing at the same time. Try next sequence:
read whole file
replace all lines
write (replace old file)
Thus you will minimize problems count

I want to open a text file and edit a specific line in java

This is code i Have written instead of editing a particular line new name gets appened at the last...
please help me out....
PrintWriter writer = new PrintWriter(new BufferedWriter(
new FileWriter("d:\\book.txt", true)));
BufferedReader br = null;
FileReader reader = null;
try {
reader = new FileReader("d:\\book.txt");
br = new BufferedReader(reader);
String line;
System.out.println((";;;;;;;;;;;;;;;;" + request
.getParameter("hname")));
System.out.println(request.getParameter("book"));
while ((line = br.readLine()) != null) {
if (request.getParameter("hname").equals(line)) {
line = line.replace(request.getParameter("hname"),
request.getParameter("book"));
writer.println(line);
writer.close();
}
}
} catch (FileNotFoundException e) {
e.printStackTrace();
}finally{
reader.close();
}
Unless you aren't changing the (byte) length of the line, you need to rewrite the whole file, adding the changed line where appropriate. This is actually just a simple change from your current code. First, initialize your FileWriter without the append (since you don't want to just append to the end of the file, which is what you're doing now).
PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter("d:\\book.txt")));
Then, either read the whole file into memory (if the file is small enough) or else write a temp file as you go and then copy it over when you're done. The second way is more robust, and requires less code changing; just modify your while loop to write every line, modified or not.
// Open a temporary file to write to.
PrintWriter writer = new PrintWriter(new BufferedWriter(new FileWriter("d:\\book.temp")));
// ... then inside your loop ...
while ((line = br.readLine()) != null) {
if (request.getParameter("hname").equals(line)) {
line = line.replace(request.getParameter("hname"),
request.getParameter("book"));
}
// Always write the line, whether you changed it or not.
writer.println(line);
}
// ... and finally ...
File realName = new File("d:\\book.txt");
realName.delete(); // remove the old file
new File("d:\\book.temp").renameTo(realName); // Rename temp file
Don't forget to close all your file handles when you're done!

Categories