As far as I can tell, I am having the same issue described here:
https://developer.jboss.org/thread/278895
(That forum is closed and no additional comments are allowed, their recommendation is to post to SO)
I am trying to run JMC 7.1.2 on OpenJDK 64-Bit Server VM Corretto-11.0.8.10.1 (build 11.0.8+10-LTS, mixed mode) on my workstation and connect to a remote Wildfly server using the "jmx:remoting-jmx" protocol. This worked for years, but AFAICT does not work in the constellation Java-11 and JMC7.
There is no error about unknown protocol or similar
(Yes, I have already read and followed instructions in:
Connect Java Mission Control to Wildfly 16), but I get this error when connecting:
org.openjdk.jmc.rjmx.ConnectionException caused by javax.security.sasl.SaslException: org/ietf/jgss/GSSManager [Caused by java.lang.NoClassDefFoundError: org/ietf/jgss/GSSManager]
at org.openjdk.jmc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:441)
at org.openjdk.jmc.rjmx.internal.ServerHandle.doConnect(ServerHandle.java:116)
at org.openjdk.jmc.rjmx.internal.ServerHandle.connect(ServerHandle.java:106)
at org.openjdk.jmc.console.ui.editor.internal.ConsoleEditor$ConnectJob.run(ConsoleEditor.java:99)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:63)
Caused by: javax.security.sasl.SaslException: org/ietf/jgss/GSSManager [Caused by java.lang.NoClassDefFoundError: org/ietf/jgss/GSSManager]
at org.jboss.remoting3.remote.ClientConnectionOpenListener$Capabilities.handleEvent(ClientConnectionOpenListener.java:426)
at org.jboss.remoting3.remote.ClientConnectionOpenListener$Capabilities.handleEvent(ClientConnectionOpenListener.java:242)
at org.xnio.ChannelListeners.invokeChannelListener(ChannelListeners.java:92)
at org.xnio.conduits.ReadReadyHandler$ChannelListenerHandler.readReady(ReadReadyHandler.java:66)
at org.xnio.nio.NioSocketConduit.handleReady(NioSocketConduit.java:89)
at org.xnio.nio.WorkerThread.run(WorkerThread.java:591)
at ...asynchronous invocation...(Unknown Source)
at org.jboss.remoting3.EndpointImpl.connect(EndpointImpl.java:599)
at org.jboss.remoting3.EndpointImpl.connect(EndpointImpl.java:561)
at org.jboss.remoting3.EndpointImpl.connect(EndpointImpl.java:549)
at org.jboss.remotingjmx.RemotingConnector.internalRemotingConnect(RemotingConnector.java:268)
at org.jboss.remotingjmx.RemotingConnector.internalConnect(RemotingConnector.java:156)
at org.jboss.remotingjmx.RemotingConnector.connect(RemotingConnector.java:103)
at org.openjdk.jmc.rjmx.internal.RJMXConnection.connectJmxConnector(RJMXConnection.java:487)
at org.openjdk.jmc.rjmx.internal.RJMXConnection.establishConnection(RJMXConnection.java:464)
at org.openjdk.jmc.rjmx.internal.RJMXConnection.connect(RJMXConnection.java:434)
... 4 more
Caused by: java.lang.NoClassDefFoundError: org/ietf/jgss/GSSManager
at java.base/java.lang.Class.getDeclaredConstructors0(Native Method)
at java.base/java.lang.Class.privateGetDeclaredConstructors(Class.java:3137)
at java.base/java.lang.Class.getConstructor0(Class.java:3342)
at java.base/java.lang.Class.getConstructor(Class.java:2151)
at java.base/java.security.Provider.newInstanceUtil(Provider.java:153)
at java.base/java.security.Provider$Service.newInstance(Provider.java:1891)
at org.wildfly.security.WildFlyElytronBaseProvider$ProviderService.newInstance(WildFlyElytronBaseProvider.java:218)
at org.wildfly.security.sasl.util.SecurityProviderSaslClientFactory.createSaslClient(SecurityProviderSaslClientFactory.java:94)
at org.wildfly.security.sasl.util.AbstractDelegatingSaslClientFactory.createSaslClient(AbstractDelegatingSaslClientFactory.java:66)
at org.wildfly.security.sasl.util.ProtocolSaslClientFactory.createSaslClient(ProtocolSaslClientFactory.java:50)
at org.wildfly.security.sasl.util.AbstractDelegatingSaslClientFactory.createSaslClient(AbstractDelegatingSaslClientFactory.java:66)
at org.wildfly.security.sasl.util.ServerNameSaslClientFactory.createSaslClient(ServerNameSaslClientFactory.java:50)
at org.wildfly.security.sasl.util.AbstractDelegatingSaslClientFactory.createSaslClient(AbstractDelegatingSaslClientFactory.java:66)
at org.wildfly.security.sasl.util.ServerNameSaslClientFactory.createSaslClient(ServerNameSaslClientFactory.java:50)
at org.wildfly.security.sasl.util.FilterMechanismSaslClientFactory.createSaslClient(FilterMechanismSaslClientFactory.java:102)
at org.wildfly.security.sasl.util.AbstractDelegatingSaslClientFactory.createSaslClient(AbstractDelegatingSaslClientFactory.java:66)
at org.wildfly.security.sasl.util.LocalPrincipalSaslClientFactory.createSaslClient(LocalPrincipalSaslClientFactory.java:76)
at org.wildfly.security.sasl.util.PrivilegedSaslClientFactory.lambda$createSaslClient$0(PrivilegedSaslClientFactory.java:64)
at java.base/java.security.AccessController.doPrivileged(Native Method)
at org.wildfly.security.sasl.util.PrivilegedSaslClientFactory.createSaslClient(PrivilegedSaslClientFactory.java:64)
at org.wildfly.security.auth.client.AuthenticationConfiguration.createSaslClient(AuthenticationConfiguration.java:1496)
at org.wildfly.security.auth.client.AuthenticationContextConfigurationClient.createSaslClient(AuthenticationContextConfigurationClient.java:408)
at org.jboss.remoting3.remote.ClientConnectionOpenListener$Capabilities.handleEvent(ClientConnectionOpenListener.java:420)
at org.jboss.remoting3.remote.ClientConnectionOpenListener$Capabilities.handleEvent(ClientConnectionOpenListener.java:242)
at org.xnio.ChannelListeners.invokeChannelListener(ChannelListeners.java:92)
at org.xnio.conduits.ReadReadyHandler$ChannelListenerHandler.readReady(ReadReadyHandler.java:66)
at org.xnio.nio.NioSocketConduit.handleReady(NioSocketConduit.java:89)
at org.xnio.nio.WorkerThread.run(WorkerThread.java:591)
If I use OpenJDK 8 with JMC 7 then it works (that is, I can connect and also read jfr files created with jdk11) but is that really the only way to get this configuration to work?
I'm trying to setup ssl for IBM MQ server and when I executed the command
runmqckm -keydb -create -db keydb.kdb -pw password -type cms -expire 1500 -stash
as one of the steps, it fails with the following exception.
Exception in thread "main" java.lang.ExceptionInInitializerError
at java.lang.J9VMInternals.ensureError(J9VMInternals.java:186)
at java.lang.J9VMInternals.recordInitializationFailure(J9VMInternals.java:175)
at javax.crypto.Mac.getInstance(Unknown Source)
at com.ibm.security.cmskeystore.FileHeaderHashGeneratorFactory$FileHeaderHashGeneratorV4Impl.generateHash(FileHeaderHashGeneratorFactory.java:145)
at com.ibm.security.cmskeystore.CMSKeyStoreSpi.engineLoad(CMSKeyStoreSpi.java:1206)
at java.security.KeyStore.load(KeyStore.java:1226)
at com.ibm.gsk.ikeyman.keystore.KeyStoreProxyCreatorFactory$FileKeyStoreProxy.performLoad(KeyStoreProxyCreatorFactory.java:304)
at com.ibm.gsk.ikeyman.keystore.KeyStoreProxyCreatorFactory$CMSKeyStoreProxy.performLoad(KeyStoreProxyCreatorFactory.java:437)
at com.ibm.gsk.ikeyman.keystore.KeyStoreProxyCreatorFactory$FileKeyStoreProxy.load(KeyStoreProxyCreatorFactory.java:253)
at com.ibm.gsk.ikeyman.keystore.KeyStoreProxyCreatorFactory$AbstractKeyStoreProxy.getKeyStore(KeyStoreProxyCreatorFactory.java:193)
at com.ibm.gsk.ikeyman.keystore.KeyStoreItemFactory.getCMSKeyStoreItem(KeyStoreItemFactory.java:323)
at com.ibm.gsk.ikeyman.keystore.KeyStoreItemFactory.newCMSKeyStoreItem(KeyStoreItemFactory.java:294)
at com.ibm.gsk.ikeyman.keystore.KeyStoreItemFactory.createKeyStore(KeyStoreItemFactory.java:115)
at com.ibm.gsk.ikeyman.command.CommandFactory$CreateDbCommand.run(CommandFactory.java:402)
at com.ibm.gsk.ikeyman.command.Command.invoke(Command.java:203)
at com.ibm.gsk.ikeyman.ikeycmd.main(ikeycmd.java:62)
Caused by: java.lang.SecurityException: Cannot set up certs for trusted CAs
at javax.crypto.b.<clinit>(Unknown Source)
... 14 more
Caused by: java.lang.SecurityException: Jurisdiction policy files are not signed by trusted signers!
at javax.crypto.b.a(Unknown Source)
at javax.crypto.b.c(Unknown Source)
at javax.crypto.b.access$600(Unknown Source)
at javax.crypto.b$0.run(Unknown Source)
at java.security.AccessController.doPrivileged(AccessController.java:333)
... 15 more
My Websphere and Java version information are as below
Websphere
Name: WebSphere MQ
Version: 8.0.0.2
Level: p800-002-150519.TRIAL
BuildType: IKAP - (Production)
Platform: WebSphere MQ for Linux (x86-64 platform)
Mode: 64-bit
O/S: Linux 2.6.32-504.el6.x86_64
InstName: Installation1
InstDesc:
Primary: Yes
InstPath: /opt/mqm
DataPath: /var/mqm
MaxCmdLevel: 801
LicenseType: Production
Java
java version "1.7.0_80"
Java(TM) SE Runtime Environment (build 1.7.0_80-b15)
Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode)
Can anyone please help me to resolve this issue?
I figured the solution myself and posting it below for the future reference of other.
Download IBM Unrestricted SDK JCE policy files from https://www-01.ibm.com/marketing/iwm/iwm/web/preLogin.do?source=jcesdk.
Copy both local_policy.jar and US_export_policy.jar files to <mq_installation_path>/java/jre64/jre/lib/security folder.
Give ownership and executable permission of both files to mqm user.
I am trying to deploy an application that was developed in MyEclipse using Tomcat (originally 5.5 but works with 7) to our demo server (Sun Java Web Server 7). Unfortunately all of the people that had designed the application have left the company. So, here is what I know:
1) The application works as-is in MyEclipse on Tomcat
2) The application was successfully deployed to Sun Java Web Server in the past (presumably with the same build)
3) I can connect to the database from the server with sqldeveloper
4) The application uses: Java EE 5 and Spring framework
Application settings:
driver: oracle.jdbc.driver.OracleDriver
url jdbc:oracle:thin#xx.xx.x.xx:service
Here is the only error I am getting. I get a lot of warnings before and after though:
warning: CORE3283: stderr: com.mchange.v2.async.ThreadPoolAsynchronousRunner$PoolThread.run(ThreadPoolAsynchronousRunner.java:547)
failure:
for host xx.xx.x.xxx trying to GET /application/login.jsp, service-j2ee reports: com.mchange.v2.resourcepool.CannotAcquireResourceException: A ResourcePool could not acquire a resource from its primary factory or source. at
com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1319) at
com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557) at
com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477) at
com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525) at
com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128) at
org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113) at
org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79) at
org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:379) at
org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:455) at
org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:463) at
org.springframework.jdbc.core.simple.SimpleJdbcTemplate.query(SimpleJdbcTemplate.java:187) at
gov.nyc.oer.dao.SiteConfigDao.getSiteConfig(Unknown Source) at
gov.nyc.oer.manager.SiteConfigManager.getSiteConfig(Unknown Source) at
gov.nyc.oer.manager.SiteConfigManager.afterPropertiesSet(Unknown Source) at
gov.nyc.oer.manager.SiteConfigManager.getValue(Unknown Source) at
org.apache.jsp.login_jsp._jspService(login_jsp.java:67) at
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:80) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:917) at
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:373) at
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:457) at
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:351) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:917) at
org.apache.catalina.core.ApplicationFilterChain.servletService(ApplicationFilterChain.java:398) at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:304) at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185) at
org.springframework.security.util.FilterChainProxy.doFilter(FilterChainProxy.java:169) at
org.springframework.web.filter.DelegatingFilterProxy.invokeDelegate(DelegatingFilterProxy.java:183) at
org.springframework.web.filter.DelegatingFilterProxy.doFilter(DelegatingFilterProxy.java:138) at
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:217) at
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:185) at
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:275) at
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:255) at
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:188) at
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:586) at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:556) at
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:187) at
org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:586) at
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:556) at
com.sun.webserver.connector.nsapi.NSAPIProcessor.service(NSAPIProcessor.java:160)
Server Configuration:
Java: Enabled
Java Home: ${WS_JDK_HOME}
Ignore Environment Class Path: Enabled
Class Path Prefix: None
Server Class Path:
${WS_INSTALL_ROOT}/lib/webserv-rt.jar
${WS_INSTALL_ROOT}/lib/pwc.jar
${WS_INSTALL_ROOT}/lib/ant.jar
${java.home}/lib/tools.jar
${WS_INSTALL_ROOT}/lib/ktsearch.jar
${WS_INSTALL_ROOT}/lib/webserv-jstl.jar
${WS_INSTALL_ROOT}/lib/jsf-impl.jar
${WS_INSTALL_ROOT}/lib/jsf-api.jar
${WS_INSTALL_ROOT}/lib/webserv-jwsdp.jar
${WS_INSTALL_ROOT}/lib/container-auth.jar
${WS_INSTALL_ROOT}/lib/mail.jar
${WS_INSTALL_ROOT}/lib/activation.jar
Class Path Suffix: ${WS_INSTALL_ROOT}/lib/ojdbc14.jar
JVM Options:
-Djava.security.auth.login.config=login.conf
-Xms128m -Xmx256m
-Djdbc.drivers=oracle.jdbc.driver.OracleDriver
Looks like your database connection is not defined on your sun java web server 7. On this website you can find out how to define it.
I had problems with Yajsw installing a service in Debian I was trying to run a java app called Test.jar, so I have
Executed ps –af command to obtain its PID,
Run GenConfig.sh to generate wrapper.conf setting /path/GenConfig.sh [PID], all was ok.!
But when I tried to install it as a Daemon I run /path/installDaemon.sh it thrown me these errors, and doesn’t install it as Daemon.
-
java version "1.6.0_26"
Java(TM) SE Runtime Environment (build 1.6.0_26-b03)
Java HotSpot(TM) Client VM (build 20.1-b02, mixed mode, sharing)
Dec 2, 2011 11:45:36 AM org.apache.commons.vfs.VfsLog info
INFO: Using "/tmp/vfs_cache" as temporary files store.
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.rzo.yajsw.boot.WrapperExeBooter.main(WrapperExeBooter.java:43)
Caused by: groovy.lang.MissingPropertyException: No such property: if (new File('/etc/rc0.d').exists()) return '/etc/rcX.d' else
return '/etc/init.d/rcX.d' for class: org.apache.commons.configuration.ConfigurationBinding at groovy.lang.Binding.getVariable(Binding.java:57)
at org.apache.commons.configuration.ConfigurationBinding.getVariable(ConfigurationBinding.java:28)
at org.apache.commons.configuration.GInterpolator.evaluate(GInterpolator.java:84)
at org.apache.commons.configuration.GInterpolator.interpolate(GInterpolator.java:57)
at org.rzo.yajsw.config.YajswConfigurationImpl.resolveContainerStore(YajswConfigurationImpl.java:388)
at org.apache.commons.configuration.AbstractConfiguration.getString(AbstractConfiguration.java:1085)
at org.rzo.yajsw.os.posix.PosixService.init(PosixService.java:186)
at org.rzo.yajsw.wrapper.WrappedService.init(WrappedService.java:118)
at org.rzo.yajsw.WrapperExe.getService(WrapperExe.java:152)
at org.rzo.yajsw.WrapperExe.doInstall(WrapperExe.java:296)
at org.rzo.yajsw.WrapperExe.executeCommand(WrapperExe.java:215)
at org.rzo.yajsw.WrapperExe.main(WrapperExe.java:175)
... 5 more
Thanks a lot
Thomas
This question already has answers here:
java.rmi.ServerException: RemoteException occurred in server thread (ClassNotFoundException)
(5 answers)
Closed 6 years ago.
Hi I'm trying to run a java application that binds a class to the naming server, but i constantly get a ClassNotFoundException
First I start the registry:
rmiregistry
then from eclipse I try to execute the server but get this error
java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: progInternet2008.commons.NominabileFactory
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:396)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:250)
at sun.rmi.transport.Transport$1.run(Transport.java:159)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:255)
at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:233)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:359)
at sun.rmi.registry.RegistryImpl_Stub.rebind(Unknown Source)
at progInternet2008.Pozzobon.tesi.Slave.main(Slave.java:54)
Caused by: java.rmi.UnmarshalException: error unmarshalling arguments; nested exception is:
java.lang.ClassNotFoundException: progInternet2008.commons.NominabileFactory
at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:386)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:250)
at sun.rmi.transport.Transport$1.run(Transport.java:159)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:155)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:535)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(TCPTransport.java:790)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:649)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: progInternet2008.commons.NominabileFactory
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:247)
at sun.rmi.server.LoaderHandler.loadProxyInterfaces(LoaderHandler.java:711)
at sun.rmi.server.LoaderHandler.loadProxyClass(LoaderHandler.java:655)
at sun.rmi.server.LoaderHandler.loadProxyClass(LoaderHandler.java:592)
at java.rmi.server.RMIClassLoader$2.loadProxyClass(RMIClassLoader.java:628)
at java.rmi.server.RMIClassLoader.loadProxyClass(RMIClassLoader.java:294)
at sun.rmi.server.MarshalInputStream.resolveProxyClass(MarshalInputStream.java:238)
at java.io.ObjectInputStream.readProxyDesc(ObjectInputStream.java:1531)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1493)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1732)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
... 12 more
I've read the RMI Java tutorial but still could not get it working...
As VM Arguments I've set this:
-Djava.rmi.server.codebase=file:${workspace_loc}/progInternet2008
please help me
(I'm using Java 6)
Run the rmiregisrty command from your /bin, /build, or /build/classes folder, whichever folder is the root of your built files.
I spent half a day trying to solve that same thing.
The exception is occurring because the rmiregistry application doesn't know where to load classes from. When you attempt to bind an object in the RMI registry, the registry downloads the class definition for that object. Some of the other answers are telling you to get around this by setting the classpath for the rmiregistry app so that it has the class definitions when it is started and doesn't need to download anything, but Sun's Java RMI tutorial explicitly says not to do this. I suspect this has the potential to cause conflicts between the version of the class in the registry and the class on the server.
The correct way to handle the problem is to set the java.rmi.server.codebase property as you were trying to do. The property requires that a directory path be terminated with a forward slash, like so:
-Djava.rmi.server.codebase=file:${workspace_loc}/progInternet2008/
You may also be having trouble if the ${workspace_loc} variable is a relative path and the rmiregistry application was not started in the same directory so the relative path is not correct for it. If you either make the path absolute, or start the rmiregistry in the appropriate directory, the ClassNotFoundException should go away. See the tutorial on the java.rmi.server.codebase property for a little more detailed information.
Okay I just overcame this problem. Make sure when you run rmiregistry that your CLASSPATH environment variable is set.
For example, you might have a script:
set CLASSPATH=[path to jdbc driver].jar
rmiregistry.exe
This was all I needed to get my lost classpath working. I'm not sure how to send -cp commandline to rmiregistry.exe. Its documentation is quite lacking.
I'm fairly certain that you'll have to start your RMI server using the same classpath as your application. I believe it takes the same parameters as java, i.e. -cp [your class path].
Close the cmd window where the rmiregistry was initially started.In a fresh cmd go to the location where your project classfiles are located(uptill bin) and start the registry using the below command:
rmiregistry -J-Djava.rmi.server.useCodebaseOnly=false
If you are using Eclipse ,Run the ServerSideProject and your ImplementationClass Instance gets bound to the URL specified.
Just print a line below the the binding method and see to it whether it is gets printed. If it gets printed successfully it means your server is working fine.
try to add /bin at the end of your VM Arg:
-Djava.rmi.server.codebase=file:${workspace_loc}/progInternet2008/bin
The file you will run are in this directory, so you need to include it in the path.
I upgraded from JDK1.6.0_33 to 1.7.0_45 and had the same problem. I found this document and resolved the problem by starting rmiregistry with:
rmiregistry -Djava.rmi.server.useCodebaseOnly=false
Refer below
http://docs.oracle.com/javase/7/docs/technotes/guides/rmi/enhancements-7.html
I had the same problem, to fix this ensure that your CLASSPATH is set to the path containing the server classes when running rmiregistry.
On a linux machine run the following commands.
export CLASSPATH="<server_class_path>"
Ensure the CLASSPATH has been set:
echo $CLASSPATH
Once the class path has been set, run rmiregistry
rmiregistry &
I spent a whole day uninstalling and reinstalling my JDK and changing the classpaths's and environment variables. But the culprit was that the command start rmigregistry didnt' start rmiregistry in a proper way. So, thanks for the comments on this page the solution was to unset the CLASSPATH temporarily. And that is done through the command set CLASSPATH=