We Keep Coding

Regex not matching against ampersand

I'm trying to match the following regex:
\b(?:mr|mrs|ms|miss|messrs|mmes|dr|prof|rev|sr|jr|&|and)\.?\b
In other words, a word boundary followed by any of the strings above (optionally followed by a period character) followed by a word boundary.
I'm trying to match this in Java, but the ampersand will not match. For example:
Pattern p = Pattern.compile(
"\\b(?:mr|mrs|ms|miss|messrs|mmes|dr|prof|rev|sr|jr|&|and)\\.?\\b",
Pattern.CASE_INSENSITIVE);
String result = p.matcher("mr one and mrs.two and three & four").replaceAll(" ");
System.out.println("["+result+"]");
The output of this is: [ one two three & four]
I've also tried this at regex101, and again the ampersand does not match: https://regex101.com/r/klkmwl/1
Escaping the ampersand does not make a difference, and I've tried using the hex escape sequence \x26 instead of ampersand (as suggested in this question). Why is this not matching?

Your regex will match an ampersand if it is located in between word chars, e.g. three&four, see this regex demo. This happens because \b before a non-word char requires a word char to appear immediately before it. Also, as there is a \b after an optional dot, both the dot and ampersand will only match if there is a word char immediately on the left.
You need to re-write the pattern so that the word boundaries are applied to the words rather than symbols:
Pattern p = Pattern.compile(
"(?:\\b(?:mr|mrs|ms|miss|messrs|mmes|dr|prof|rev|sr|jr|and)\\b|&)\\.?",
Pattern.CASE_INSENSITIVE);
See the regex demo online.

Problem is due to use of word boundaries. There are no word boundaries before or after a non-word character like &.
In place of word boundary you can use lookarounds:
(?<!\w)(?:[jsdm]r|mr?s|miss|messrs|mmes|prof|re|&|and)\.?(?!\w)
Updated RegEx Demo
(?<!\w): Make sure that previous character is not a word character
(?!\w): Make sure that next character is not a word character
Note some tweaks in your regex to make it shorter.

Erase any string that doesn't match a pattern using replaceall()

I need to replace ALL characters that don't follow a pattern with "".
I have strings like:
MCC-QX-1081
TEF-CO-QX-4949
SPARE-QX-4500
So far the closest I am using the following regex.
String regex = "[^QX,-,\\d]";
Using the replaceAll String method I get QX1081 and the expected result is QX-1081

You're using a character class which matches single characters, not patterns.
You want something like
String resultString = subjectString.replaceAll("^.*?(QX-\\d+)?$", "$1");
which works as long as nothing follows the QX-digits part in your strings.

Put the dash at the end of the regex: [^QX,\d-]
Next you just have to substring to filter out the first dash.
Don't know exactly what you expect for all strings but if you want to match a dash in a character class then it must be set as last character.

You are using a character class where you have to either escape the hyphen or put it at the start or at the end like [^QX,\d-] or else you are matching a range from a comma to a comma. But changing that will give you -QX-1081 which is not the desired result.
You could match your pattern and then replace with the first capturing group $1:
^(?:[A-Z]+-)+(QX-\d+)$
In Java you have to double escape matching a digit \\d
That will match:
^ Start of the string
(?:[A-Z]+-)+ Repeat 1+ times one or more uppercase charactacters followed by a hyphen
(QX-\d+) Capture in a group QX- followed by 1+ digits
$ End of the string
For example:
String result = "MCC-QX-1081".replaceAll("^(?:[A-Z]+-)+(QX-\\d+)$", "$1");
System.out.println(result); // QX-1081
See the Regex demo | Java demo
Note that if you are doing just 1 replacement, you could also use replaceFirst

Regex - How to recognize a String + white spaces + String

I need to recognize some pattern which goes like this:
[letters][some spaces][letters]
What I done so far is this:
String regex = "[a-zA-Z]\\s+[a-zA-Z]";

As per the requirement, you wrote letters (with a s at the end).
[letters][some spaces][letters]
So to do that you must be quantifying the character class as
String regex = "[a-zA-Z]+\\s+[a-zA-Z]+";
[a-zA-Z]+ Matches one or more letters. Here + is the quantifier which quantifies [a-zA-Z] One or more times.
Regex Demo
Where as if you write [a-zA-Z]\\s+[a-zA-Z], it would only match a single character before and after the space.
Regex Demo
If you want the entire string to follow this pattern, you must be adding anchors as well to the pattern as
String regex = "^[a-zA-Z]+\\s+[a-zA-Z]+$";
^ Anchors the regex at the start of the string.
$ Anchors the regex at the end of the string.
These anchors ensure that immediatly following start of string, ^ number of letters occure, [a-zA-Z]+ followed by space and again letters. The second group of letters is followed by end of string $

How can I remove all leading and trailing punctuation?

I want to remove all the leading and trailing punctuation in a string. How can I do this?
Basically, I want to preserve punctuation in between words, and I need to remove all leading and trailing punctuation.
., #, _, &, /, - are allowed if surrounded by letters
or digits
\' is allowed if preceded by a letter or digit
I tried
Pattern p = Pattern.compile("(^\\p{Punct})|(\\p{Punct}$)");
Matcher m = p.matcher(term);
boolean a = m.find();
if(a)
term=term.replaceAll("(^\\p{Punct})", "");
but it didn't work!!

Ok. So basically you want to find some pattern in your string and act if the pattern in matched.
Doing this the naiive way would be tedious. The naiive solution could involve something like
while(myString.StartsWith("." || "," || ";" || ...)
myString = myString.Substring(1);
If you wanted to do a bit more complex task, it could be even impossible to do the way i mentioned.
Thats why we use regular expressions. Its a "language" with which you can define a pattern. the computer will be able to say, if a string matches that pattern. To learn about regular expressions, just type it into google. One of the first links: http://www.codeproject.com/Articles/9099/The-30-Minute-Regex-Tutorial
As for your problem, you could try this:
myString.replaceFirst("^[^a-zA-Z]+", "")
The meaning of the regex:
the first ^ means that in this pattern, what comes next has to be at
the start of the string.
The [] define the chars. In this case, those are things that are NOT
(the second ^) letters (a-zA-Z).
The + sign means that the thing before it can be repeated and still
match the regex.
You can use a similar regex to remove trailing chars.
myString.replaceAll("[^a-zA-Z]+$", "");
the $ means "at the end of the string"

You could use a regular expression:
private static final Pattern PATTERN =
Pattern.compile("^\\p{Punct}*(.*?)\\p{Punct}*$");
public static String trimPunctuation(String s) {
Matcher m = PATTERN.matcher(s);
m.find();
return m.group(1);
}
The boundary matchers ^ and $ ensure the whole input is matched.
A dot . matches any single character.
A star * means "match the preceding thing zero or more times".
The parentheses () define a capturing group whose value is retrieved by calling Matcher.group(1).
The ? in (.*?) means you want the match to be non-greedy, otherwise the trailing punctuation would be included in the group.

Use this tutorial on patterns. You have to create a regex that matches string starting with alphabet or number and ending with alphabet or number and do inputString.matches("regex")

java regex until certain word/text/characters

Please consider the following text :
That is, it matches at any position that has a non-word character to the left of it, and a word character to the right of it.
How can I get the following result :
That is, it matches at any position that has a non-word character to the
That is everything until left

input.replace("^(.*?)\\bleft.*$", "$1");
^ anchors to the beginning of the string
.*? matches as little as possible of any character
\b matches a word boundary
left matches the string literal "left"
.* matches the remainder of the string
$ anchors to the end of the string
$1 replaces the matched string with group 1 in ()
If you want to use any word (not just "left"), be careful to escape it. You can use Pattern.quote(word) to escape the string.

The answer is actually /(.*)\Wleft\w/ but it won't match anything in
That is, it matches at any position that has a non-word character to the left of it, and a word character to the right of it.

String result = inputString.replace("(.*?)left.*", "$1");