I have some JDialogs displaying JTables.
When the header columns are clicked a sort occurs on that column.
My question is : how can I know when a column header has been clicked and thus made a sort active.
When the sort is active, I know I should user the .convertRowIndexToModel method.
But how do I detect that a column is sorting in order not to mess the correct index if no sort is active?
Generally speaking, you should ALWAYS uses the convertRowIndexToModel when you take an index value from the view (JTable) and try and look up some value within the model. The JTable does this automatically when you use it's methods, but incase you're not, you need to take care of it yourself.
There's no need to know if the view is sorted or not...
If you "really" want to know when a table is sorted, you could attach a RowSorterListener to the TableRowSorter used by the table.
You could also use the TableRowSorter#getSortKeys to see which columns are included in the sort...
I have used it for my selection table. When the auto order is activated (setAutoCreateRowSorter(true))
the indices of the model table and the visual change, so you have to tell it to look for it within the model with respect to the one you are seeing.
((CustomTable)form.getAvailListView().getModel()).data.get(form.getListView().convertRowIndexToModel(i))
Related
I'm working on GUI with SWT and I'm trying to clear all table contents and columns (make it fully empty)
I've used the command .removeAll() but the columns still there but empty.
How can I remove/delete columns too?
Thanks.
For your information, .removeAll is used to remove all the elements from a list that are contained in the specified collection.
You can use the .clear and SetVisible(bool visible) to make the contents empty and invisible from the interface.
For the example,
txtName.clear();
txtName.setVisible(false);
You are correct in using removeAll() to remove all items from the table. If you also need to start from scratch with an empty table (ie. remove the columns) you can simply dispose the columns with the dispose() method:
for (final TableColumn column : table.getColumns()) {
column.dispose();
}
That being said, if you really need to completely change the content of a Table to the point where the columns are all different, you may as well simply dispose and re-create the whole table.
I am building a JTreeTable. I found some starter code and have come pretty far. In the end my goal is to be able to have different data at different levels like a hierarchical list.
Currently, I have it working with data at different levels. However, I am running up against a wall when it comes to changing the columns as a next goal. From where I currently stand I have 3 more milestones:
Show different set of columns for different levels
Ability to adjust column widths for different levels
Ensure the JTree part of the table always stays to left
I am getting close to closing out this task but again stuck at the first of these 3.
Since creating a JTreeTable is complex, the minimum example leverages several class listed below in the image:
I am happy to post the code to any of those classes but I also did not want clog the question with useless code. First let me show the functionality I want.
The first image is when the top level is selected and the second image is when the second level is selected. Notice how the columns are different. That is what I want to happen in my application.
Top level selected:
Second level selected:
So one way I tried to solve this problem, is when the list selection is changed inside this section of code:
ListSelectionListener listener = (ListSelectionEvent e) -> {
TreeTableModelAdapter adapter = (TreeTableModelAdapter) JTreeTable.this.getModel();
//Need to see why this breaks.
JTreeTable.this.getTableHeader().setColumnModel(adapter.getColumnModel());
};
this.getSelectionModel().addListSelectionListener(listener);
This code is in the initialization of the JTreeTable. I have tried setting the column model on both the TableHeader and the table as well. Below is what happens then when I select a row:
The columns just disappear on me. The creation of the column model is happening in the TreeTableModelAdapter class with the following method:
public TableColumnModel getColumnModel(){
DefaultTableColumnModel model = new DefaultTableColumnModel();
for(int i=0;i<getColumnCount();i++){
TableColumn column = new TableColumn();
column.setIdentifier(getColumnName(i));
model.addColumn(column);
}
return model;
}
Any direction would be very helpful. Again happy to post any code you think could be helpful to answer the question. Just put a comment in and I will add it right away.
I will add the milestones as I find them in case this helps others, but for now this question is answered.
Milestone 1
I was actually able to solve the first milestone. The key is to trigger the creation of the columns of the column model, not to create a new column model. Below is the code for when the row selection is changed:
//Change columns depending on row
ListSelectionListener listener = (ListSelectionEvent e) -> {
createDefaultColumnsFromModel();
};
this.getSelectionModel().addListSelectionListener(listener);
This code creates the columns based on the row selected in the JTree part of the JTreeTable. The TreeTableModelAdapter implements the getColumnCount() and getColumnName() methods by also passing the selected row in the JTree to the JTreeTableModel so that the columns and their names are dynamically retrieved based on a particular node in the JTree. The key for this for me was trigger those to be called again to update the JTreeTable.
Milestone 2
Adjusting column widths based on the data level proved to be much more difficult than I had originally anticipated. In order to retain the cells state when the column model changed I had to disconnect the painting of the cells from it. This is a hairy process because this is done inside BasicTableUI and the method that gets the rectangle of the cell is private. So I had to subclass it, overload the paint() method and create my own methods that get called inside the paint method. There was a lot of copy pasting so that I could call normally private methods. I just renamed them and referenced these methods instead. The way the ui class was designed did not make it very flexible. Below is 2 images where I am selecting different levels and the columns are obviously different widths at different levels.
Milestone 3
I was able to make this work by keeping track of the view in the model. This seems very dirty to me as the model should separated from the view. Since the tree column's class is unique, I just returned the right class if that column was the first in the view.
The one problem I have with this technique is that I get unexpected behavior where the value returned is not consistent. I attempted to resolve this by overriding JTree.covertValueToText(). Since a JTree only expects 1 value and depending on the sequence of columns in the view this value could change. So in overriding this method I check the stored index for the JTree column's value. Again this causes the unexpected behavior. I will update the post if I find the fix.
I got stuck with a performance problem while writing my program and I need your help! :)
I'm using a JTable to view test results taken from a vector I made and it has 4 columns in it. When I click on a row the details from a saved txt file of that test are shown in a child window. Also, when I click on the columns header the event sends the vector to a function that sorts it according to the pressed column. Every time a new value needs to be entered the sorting function is called again.
My program works fine with a small number of rows. But, when I enter say, 150 rows, every time I enter a new row the Table flicks (the sort probably takes a lot of time), but I have to keep the vector synchronized with the jable because of the "push to view the result" option.
I would really appreciate some help with this.
thanks
You shouldn't have to do any sorting yourself. JTable supports sorting natively, and has the convertRowIndexToModel and convertRowIndexToView methods to go from the view index to the model index and vice-versa.
See http://docs.oracle.com/javase/tutorial/uiswing/components/table.html#sorting.
Use JTable's internal sorter (DefaultRowSorter). Do not re-create the vector which holds the data - use Vector's add() method to add new records. In many years of Java GUI development I haven't seen a single case where I had to keep records in the TableModel sorted. Make sure getColumnClass() returns a proper type, so the default sorter knows how to sort the column, and that is all.
I have a JFace TableViewer. The values in one column should normally be unique, but there are cases where it makes sense that they are not (e.g. when a row was copied and not yet changed). However I want to alert the user of the duplicate values by highlighting the rows which contain duplicate values in that column. What's the best way to do this? The LabelProvider seems to only give me access to the current cell or at most the current row.
Thanks,
Thomas
To detect duplicate across the whole table, I guess you got to have some kind of map or set containing all the cell's data. The way I did was to put such map in the view (TableViewer container) and then have label provider holding a link to that view (hence the map). So from within label provider, it is able to detect duplicate and respond accordingly.
The desired behavior is akin to the mirrored text editing field provided in Excel when a given cell is selected, allowing more space to view the contents of the cell. I have a JTable with 5 columns and n rows. Column 2 holds expressions that can be arbitrarily long, thus I'd like to provide a separate JTextField to work with for editing the contents of the expression cell per row. The other fields are directly editable in the table. When the user clicks on a field in column 2, however, I want to send them to the text field. Any contents preexisting in the cell should be appear in the text field and additional edits in the text field should be mirrored in the table cell. Likewise, if someone double-clicks on the cell and edits it directly, I want those changes reflected in the text field. Thus, the user can choose to edit in either space and both are updated. Ideally, they are updated per keystroke, but update upon hitting return is acceptable.
So, far I've got the JTable, TableModel, TableModelListener, JTextField, ListSelectionListener, and AbstractAction, working together to provide most of the functionality described above. I'm missing the reflection of direct table cell edits to the text field and per-keystoke updates.
Are their ideas on how best to construct this behavior?
Well, if you want to get data from the table to the cell then you add the code to your TableModel's setValueAt() function, which should run when the user changes the content in an editable cell. I don't think that will update per-keystroke though.
If you want to move data from the textbox to the table cell use code like this
myJTextField.getDocument().addDocumentListener(new MyDocumentListener());
Where MyDocumentListener is an implementation of the javax.swing.event.DocumentListener interface
That will get you per-keystroke updates from the box to the table. But for the other way around it's a bit trickier.
There are two ways you might be able to go about doing it
1) Add a key listener to the table, and when the user starts typing check to see what table element is active, and intercept keystrokes as they type. That's kind of messy, though.
2) Another option might be to try to grab or replace the component that the table is using to actually let the user make the changes. I think that JTable actually allows you to change the editor component if you dig around.