I want to counter the lines of the file and in the second pass i want to take every single line and manipulating it. It doesn't have a compilation error but it can't go inside the second while ((line = br.readLine()) != null) .
Is there a different way to get the lines(movies) of the file and storing in an array ?
BufferedReader br = null;
try { // try to read the file
br = new BufferedReader(new FileReader("movies.txt"));
String line;
int numberOfMovies = 0;
while ((line = br.readLine()) != null) {
numberOfMovies++;
}
Movie[] movies = new Movie[numberOfMovies]; // store in a Movie
// array every movie of
// the file
String title = "";
int id = 0;
int likes = 0;
int icounter = 0; // count to create new movie for each line
while ((line = br.readLine()) != null) {
line = line.trim();
line = line.replaceAll("/t", "");
line = line.toLowerCase();
String[] tokens = line.split(" "); // store every token in a
// string array
id = Integer.parseInt(tokens[0]);
likes = Integer.parseInt(tokens[tokens.length]);
for (int i = 1; i < tokens.length; i++) {
title = title + " " + tokens[i];
}
movies[icounter] = new Movie(id, title, likes);
icounter++;
}
} catch (IOException e) {
e.printStackTrace();
}
Simplest way would be to reset br again.
try { // try to read the file
br = new BufferedReader(new FileReader("movies.txt"));
String line; int numberOfMovies = 0;
while (br.hasNextLine()){
numberOfMovies++;
}
br.close();
Movie[] movies = new Movie[numberOfMovies];
// store in a Movie
// array every movie of
// the file
String title = "";
int id = 0;
int likes = 0;
int icounter = 0;
// count to create new movie for each line
br = new BufferedReader(new FileReader("movies.txt"));
while ((br.hasNextLine()) {
line = line.trim();
line = line.replaceAll("/t", "");
line = line.toLowerCase();
String[] tokens = line.split(" ");
// store every token in a
// string array
id = Integer.parseInt(tokens[0]);
likes = Integer.parseInt(tokens[tokens.length]);
for (int i = 1; i < tokens.length; i++) {
title = title + " " + tokens[i];
}
movies[icounter] = new Movie(id, title, likes);
icounter++;
}
} catch (IOException e) { e.printStackTrace(); }
I changed br.nextLine() != null to br.hasNextLine() because it's shorter and more appropriate in this case. Plus it won't consume a line.
There are two things here:
InputStreams and Readers are one-shot structures: once you've read them to the end, you either need to explicitly rewind them (if they support rewinding), or you need to close them (always close your streams and readers!) and open a new one.
However in this case the two passes are completely unnecessary, just use a dynamically growing structure to collect your Movie objects instead of arrays: an ArrayList for example.
Firstly, there is no need to read the file twice.
Secondly, why don't you use the java.nio.file.Files class to read your file.
It has a method readAllLines(Path path, Charset cs) that gives you back a List<String>.
Then if you want to know how many lines just call the size() method on the list and you can use the list to construct the Movie objects.
List<Movie> movieList = new ArrayList<>();
for (String line : Files.readAllLines(Paths.get("movies.txt"), Charset.defaultCharset())) {
// Construct your Movie object from each individual line and add to the list of Movies
movieList.add(new Movie(id, title, likes));
}
The use of the Files class also reduces your boilerplate code as it will handle closing the resource when it has completed reading meaning you will not need a finally block to close anything.
If you use the same Reader, everything is already read once you reach the second loop.
Close the first Reader, then create another one to read a second time.
You are running through the file with the BufferedReader, until the nextline points towards null. As your BufferedReader IS null, it won't even enter the second while((line = br.readline) != null), as the first read line is null.
Try getting a new BufferedReader. something like this:
...
int id = 0;
int likes = 0;
int icounter = 0;
br = new BufferedReader(new FileReader("movies.txt")) //Re-initialize the br to point
//onto the first line again
while ((line = br.readLine()) != null)
...
EDIT:
Close the reader first..
This is a combination of a couple of other answers already on this post, but this is how I would go about rewriting your code to populate a List. This doubly solves the problem of 1) needing to read the file twice 2) removing the boilerplate around using BufferedReader while using Java8 Streams to make the initializing of your List as concise as possible:
private static class Movie {
private Movie(int id, String title, int likes) {
//TODO: set your instance state here
}
}
private static Movie movieFromFileLine(String line) {
line = line.trim();
line = line.replaceAll("/t", "");
line = line.toLowerCase();
String[] tokens = line.split(" "); // store every token in a
String title = "";
int id = Integer.parseInt(tokens[0]);
int likes = Integer.parseInt(tokens[tokens.length]);
for (int i = 1; i < tokens.length; i++) {
title = title + " " + tokens[i];
}
return new Movie(id, title, likes);
}
public static void main(String[] args) throws IOException {
List<Movie> movies = Files.readAllLines(Paths.get("movies.txt"), Charset.defaultCharset()).stream().map
(App::movieFromFileLine).collect(Collectors.toList());
//TODO: Make some magic with your list of Movies
}
For cases where you absolutely need to read a source (file, URL, or other) twice, then you need to be aware that it is quite possible for the contents to change between the first and second readings and be prepared to handle those differences.
If you can make a reasonable assumption that the content of the source will fit in to memory and your code fully expects to work on multiple instances of Readers/InputStreams, you may first consider using an appropriate IOUtils.copy method from commons-io to read the contents of the source and copy it to a ByteArrayOutputStream to create a byte[] that can be re-read over and over again.
Related
I want to by reading the data of a file to split the results based on .split(",") in another words for this particular example i want to have 2 Indexes with each containing up to 5 informations which i would also like to acces with the .[0] and .[1] Method.
the File with the Data.
File Reading Method.
public void fileReading(ActionEvent event) throws IOException {
File file = new File("src/DateSpeicher/datenSpeicher.txt");
BufferedReader br = new BufferedReader(new FileReader(file));
String st;
while ((st = br.readLine()) != null) {
System.out.println(st);
}
}
The method does work very greatly however, i wonder how can i split those two in two Indexes or String arrays which both can be accessed through respective indecies [0], [1]. For first data in the firm array - 655464 [0][0] for last in the second Array [1][4].
My approach:
1. Making an ArrayList for every ,
2. Adding data till ","
Issue: eventho approach above works, you cant do such things as array1[0] - it gives an error, however the index method is crucial.
How can i solve this problem?
Path path = Paths.get("src/DateSpeicher/datenSpeicher.txt"); // Or:
Path path = Paths.get(new URL("/DateSpeicher/datenSpeicher.txt").toURI());
Either two Strings, and then handling them:
String content = new String(Files.readAllBytes(path), Charset.defaultCharset());
String[] data = content.split(",\\R");
or a list of lists:
List<String> lines = Files.readAllLines(path, Charset.defaultCharset());
// Result:
List<List<String>> lists = new ArrayList<>();
List<String> newList = null;
boolean addNewList = true;
for (int i = 0; i < lines.size(); ++i) {
if (addNewList) {
newList = new ArrayList<>();
lists.add(newList);
addNewList = false;
}
String line = lines.get(i);
if (line.endsWith(",")) {
line = line.substring(0, line.length() - 1);
addNewList = true;
}
newList.add(line);
}
I am trying to read in a text file and then manipulate a little and update the records into a new text file.
Here is what I have so far:
ArrayList<String> linesList = new ArrayList<>();
BufferedReader br;
String empid, email;
String[] data;
try {
String line;
br = new BufferedReader(new FileReader("file.txt"));
while ((line = br.readLine()) !=null) {
linesList.add(line);
}
br.close();
}
catch (IOException e) { e.printStackTrace(); }
for (int i = 0; i < linesList.size(); i++) {
data = linesList.get(i).split(",");
empid = data[0];
ccode = data[3];
}
File tempFile = new File("File2.txt");
BufferedWriter bw = new BufferedWriter(new FileWriter(tempFile));
for (int i = 0; i < linesList.size(); i++) {
if(i==0){
bw.write(linesList.get(i));
bw.newLine();
}
else{
data = linesList.get(i).split(",");
String empid1 = data[0];
if(data[13].equals("IND")) {
String replace = data[3].replaceAll("IND", "IN");
ccode1 = replace;
System.out.println(ccode1);
}
else if(data[13].equals("USA")) {
String replace = data[3].replaceAll("USA", "US");
ccode1 = replace;
}
else {
ccode1 = replace; //This does not work as replace is not defined here, but how can I get it to work here.
}
String newData=empid1+","+ccode1;
bw.write(newData);
bw.newLine();
}
}
Here is what is inside the text file:
EID,First,Last,Country
1,John,Smith,USA
2,Jane,Smith,IND
3,John,Adams,USA
So, what I need help with is editing the three letter country code and replacing it with a 2 letter country code. For example: USA would become US, and IND would become IN. I am able to read in the country code, but am having trouble in changing the value and then replacing the changed value back into a different text file. Any help is appreciated. Thanks in advance.
Open file in text editor, Search and Replace, ,USA with ,US, ,IND with ,IN and so on.
As such, to automate it, on the same while loop you read a line do:
//while(read){ line.replaceAll(",USA",",US");
That will be the easiest way to complete your objective.
To save, open a BufferedWriter bw; just like you opened a reader and use bw.write(). You would probably prefer to open both at the same time, the reader on your source file, and the writer on a new file, with _out suffix. That way you dont need to keep the file data in memory, you can read and write as you loop.
For harder ways, read the csv specs: https://www.rfc-editor.org/rfc/rfc4180#section-2
Notice that you have to account for the possibility of fields being enclosed in quotes, like: "1","John","Smith","USA", which means you also have to replace ,\"USA with ,\"US.
The delimiter may or may not be a comma, you have to make sure yur input will always use the same delimiter, or that you can detect and switch at runtime.
You have to account for the case where a delimiter may be part of a field, or where quotes are part of a field.
Now you know/can solve these issues you can, instead of using replace, parse the lines character by character using while( (/*int*/ c = br.read()) != -1), and do this replacement manually with an if gate.
/*while(read)*/
if( c == delimiter ){
if not field, start next field, else add to field value
} else if( c == quote ){
if field value empty, ignore and expect closing quote, else if quote escape not marked, mark it, else, add quote to field value
}
(...)
} else if( c == 13 or c == 10 ){
finished line, check last field of row read and replace data
}
To make it better/harder, define a parsing state machine, put the states into an Enum, and write the if gates with them in mind (this will make your code be more like a compiler parser).
You can find parsing code at different stages here: https://www.mkyong.com/java/how-to-read-and-parse-csv-file-in-java/
You need to change a little bit in your concept. If you want to edit a file then,
create a new file and write content in new file and delete old file and rename new file
with old name.
ArrayList<String> linesList = new ArrayList<>();
BufferedReader br;
String[] data;
File original=new File("D:\\abc\\file.txt");
try {
String line;
br = new BufferedReader(new FileReader(original));
while ((line = br.readLine()) !=null) {
linesList.add(line);
}
br.close();
}
catch (IOException e) { e.printStackTrace(); }
File tempFile = new File("D:\\abc\\tempfile.txt");
BufferedWriter bw = new BufferedWriter(new FileWriter(tempFile));
for (int i = 0; i < linesList.size(); i++) {
if(i==0){
bw.write(linesList.get(i));
bw.newLine();
}
else{
data = linesList.get(i).split(",");
String empid = data[0];
String name=data[1];
String lname=data[2];
String ccode = data[3].substring(0, 2);
String newData=empid+","+name+","+lname+","+ccode+"\n";
bw.write(newData);
bw.newLine();
}
}
bw.close();
if (!original.delete()) {
System.out.println("Could not delete file");
return;
}
// Rename the new file to the filename the original file had.
if (!tempFile.renameTo(original))
System.out.println("Could not rename file");
I am trying to create a program that takes an inputted text file and reads the lines one by one. It then needs to store the most recently read lines (the number of lines depends on the parameter lines) in an array and then I need to print the lines using PrintWriter.
I started the first part but I'm not sure if I have the right idea. If anyone can help me on the second part as well that would be very appreciated!
public void RecentLines(Reader in, Writer out, int lines) throws IOException {
BufferedReader r3ader = new BufferedReader(in);
String str;
while((str = r3ader.readLine()) != null){
String[] arr = str.split(" ");
for( int i =0; i < lines; i++){
arr[i] = r3ader.readLine();
}
}
EDIT
the full question is this:
Create a program which reads lines from IN, one line at the time until the end. Your method must maintain an internal buffer that stores the most recently read lines (this might be best done using an array). Once the method reaches the end of the file, it should print the lines stored in the internal buffer into out, probably best done by creating a PrintWriter to decorate this Writer. (Except for your debugging purposes during the development stage, this method should not print anything to System.out.)
Try this one:
public void RecentLines(Reader in, Writer out, int lines) throws IOException {
BufferedReader r3ader = new BufferedReader(in);
String str;
int i=0;
String[] lineArray = new String[lines];
while((str = r3ader.readLine()) != null){
lines[i%lines] = str;
i++;
if(!r3ader.hasNextLine()){
break;
}
}
sounds like a task for data structures. Queue seems to be the best fit for a given task.
public void RecentLines(Reader in, Writer out, int lines) throws IOException {
BufferedReader r3ader = new BufferedReader(in);
BufferedWriter wout = new BufferedWriter(out);
String str;
Queue<String> content = new LinkedList<String>();
int i = 0;
while ((str = r3ader.readLine()) != null) {
if (i >= lines) {
content.remove();
}
content.add(str);
i++;
}
wout.write(String.valueOf(content));
}
In Java, is there any method to read a particular line from a file? For example, read line 32 or any other line number.
For small files:
String line32 = Files.readAllLines(Paths.get("file.txt")).get(32)
For large files:
try (Stream<String> lines = Files.lines(Paths.get("file.txt"))) {
line32 = lines.skip(31).findFirst().get();
}
Unless you have previous knowledge about the lines in the file, there's no way to directly access the 32nd line without reading the 31 previous lines.
That's true for all languages and all modern file systems.
So effectively you'll simply read lines until you've found the 32nd one.
Not that I know of, but what you could do is loop through the first 31 lines doing nothing using the readline() function of BufferedReader
FileInputStream fs= new FileInputStream("someFile.txt");
BufferedReader br = new BufferedReader(new InputStreamReader(fs));
for(int i = 0; i < 31; ++i)
br.readLine();
String lineIWant = br.readLine();
Joachim is right on, of course, and an alternate implementation to Chris' (for small files only because it loads the entire file) might be to use commons-io from Apache (though arguably you might not want to introduce a new dependency just for this, if you find it useful for other stuff too though, it could make sense).
For example:
String line32 = (String) FileUtils.readLines(file).get(31);
http://commons.apache.org/io/api-release/org/apache/commons/io/FileUtils.html#readLines(java.io.File, java.lang.String)
You may try indexed-file-reader (Apache License 2.0). The class IndexedFileReader has a method called readLines(int from, int to) which returns a SortedMap whose key is the line number and the value is the line that was read.
Example:
File file = new File("src/test/resources/file.txt");
reader = new IndexedFileReader(file);
lines = reader.readLines(6, 10);
assertNotNull("Null result.", lines);
assertEquals("Incorrect length.", 5, lines.size());
assertTrue("Incorrect value.", lines.get(6).startsWith("[6]"));
assertTrue("Incorrect value.", lines.get(7).startsWith("[7]"));
assertTrue("Incorrect value.", lines.get(8).startsWith("[8]"));
assertTrue("Incorrect value.", lines.get(9).startsWith("[9]"));
assertTrue("Incorrect value.", lines.get(10).startsWith("[10]"));
The above example reads a text file composed of 50 lines in the following format:
[1] The quick brown fox jumped over the lazy dog ODD
[2] The quick brown fox jumped over the lazy dog EVEN
Disclamer: I wrote this library
Although as said in other answers, it is not possible to get to the exact line without knowing the offset (pointer) before. So, I've achieved this by creating an temporary index file which would store the offset values of every line. If the file is small enough, you could just store the indexes (offset) in memory without needing a separate file for it.
The offsets can be calculated by using the RandomAccessFile
RandomAccessFile raf = new RandomAccessFile("myFile.txt","r");
//above 'r' means open in read only mode
ArrayList<Integer> arrayList = new ArrayList<Integer>();
String cur_line = "";
while((cur_line=raf.readLine())!=null)
{
arrayList.add(raf.getFilePointer());
}
//Print the 32 line
//Seeks the file to the particular location from where our '32' line starts
raf.seek(raf.seek(arrayList.get(31));
System.out.println(raf.readLine());
raf.close();
Also visit the Java docs on RandomAccessFile for more information:
Complexity: This is O(n) as it reads the entire file once. Please be aware for the memory requirements. If it's too big to be in memory, then make a temporary file that stores the offsets instead of ArrayList as shown above.
Note: If all you want in '32' line, you just have to call the readLine() also available through other classes '32' times. The above approach is useful if you want to get the a specific line (based on line number of course) multiple times.
Another way.
try (BufferedReader reader = Files.newBufferedReader(
Paths.get("file.txt"), StandardCharsets.UTF_8)) {
List<String> line = reader.lines()
.skip(31)
.limit(1)
.collect(Collectors.toList());
line.stream().forEach(System.out::println);
}
No, unless in that file format the line lengths are pre-determined (e.g. all lines with a fixed length), you'll have to iterate line by line to count them.
In Java 8,
For small files:
String line = Files.readAllLines(Paths.get("file.txt")).get(n);
For large files:
String line;
try (Stream<String> lines = Files.lines(Paths.get("file.txt"))) {
line = lines.skip(n).findFirst().get();
}
In Java 7
String line;
try (BufferedReader br = new BufferedReader(new FileReader("file.txt"))) {
for (int i = 0; i < n; i++)
br.readLine();
line = br.readLine();
}
Source: Reading nth line from file
If you are talking about a text file, then there is really no way to do this without reading all the lines that precede it - After all, lines are determined by the presence of a newline, so it has to be read.
Use a stream that supports readline, and just read the first X-1 lines and dump the results, then process the next one.
It works for me:
I have combined the answer of
Reading a simple text file
But instead of return a String I am returning a LinkedList of Strings. Then I can select the line that I want.
public static LinkedList<String> readFromAssets(Context context, String filename) throws IOException {
BufferedReader reader = new BufferedReader(new InputStreamReader(context.getAssets().open(filename)));
LinkedList<String>linkedList = new LinkedList<>();
// do reading, usually loop until end of file reading
StringBuilder sb = new StringBuilder();
String mLine = reader.readLine();
while (mLine != null) {
linkedList.add(mLine);
sb.append(mLine); // process line
mLine = reader.readLine();
}
reader.close();
return linkedList;
}
Use this code:
import java.nio.file.Files;
import java.nio.file.Paths;
public class FileWork
{
public static void main(String[] args) throws IOException {
String line = Files.readAllLines(Paths.get("D:/abc.txt")).get(1);
System.out.println(line);
}
}
You can use LineNumberReader instead of BufferedReader. Go through the api. You can find setLineNumber and getLineNumber methods.
You can also take a look at LineNumberReader, subclass of BufferedReader. Along with the readline method, it also has setter/getter methods to access line number. Very useful to keep track of the number of lines read, while reading data from file.
public String readLine(int line){
FileReader tempFileReader = null;
BufferedReader tempBufferedReader = null;
try { tempFileReader = new FileReader(textFile);
tempBufferedReader = new BufferedReader(tempFileReader);
} catch (Exception e) { }
String returnStr = "ERROR";
for(int i = 0; i < line - 1; i++){
try { tempBufferedReader.readLine(); } catch (Exception e) { }
}
try { returnStr = tempBufferedReader.readLine(); } catch (Exception e) { }
return returnStr;
}
you can use the skip() function to skip the lines from begining.
public static void readFile(String filePath, long lineNum) {
List<String> list = new ArrayList<>();
long totalLines, startLine = 0;
try (Stream<String> lines = Files.lines(Paths.get(filePath))) {
totalLines = Files.lines(Paths.get(filePath)).count();
startLine = totalLines - lineNum;
// Stream<String> line32 = lines.skip(((startLine)+1));
list = lines.skip(startLine).collect(Collectors.toList());
// lines.forEach(list::add);
} catch (IOException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
}
list.forEach(System.out::println);
}
EASY WAY - Reading a line using line number.
Let's say Line number starts from 1 till null .
public class TextFileAssignmentOct {
private void readData(int rowNum, BufferedReader br) throws IOException {
int n=1; //Line number starts from 1
String row;
while((row=br.readLine()) != null) { // Reads every line
if (n == rowNum) { // When Line number matches with which you want to read
System.out.println(row);
}
n++; //This increments Line number
}
}
public static void main(String[] args) throws IOException {
File f = new File("../JavaPractice/FileRead.txt");
FileReader fr = new FileReader(f);
BufferedReader br = new BufferedReader(fr);
TextFileAssignmentOct txf = new TextFileAssignmentOct();
txf.readData(4, br); //Read a Specific Line using Line number and Passing buffered reader
}
}
for a text file you can use an integer with a loop to help you get the number of the line, don't forget to import the classes we are using in this example
File myObj = new File("C:\\Users\\LENOVO\\Desktop\\test.txt");//path of the file
FileReader fr = new FileReader(myObj);
fr.read();
BufferedReader bf = new BufferedReader(fr); //BufferedReader of the FileReader fr
String line = bf.readLine();
int lineNumber = 0;
while (line != null) {
lineNumber = lineNumber + 1;
if(lineNumber == 7)
{
//show line
System.out.println("line: " + lineNumber + " has :" + line);
break;
}
//lecture de la prochaine ligne, reading next
line = bf.readLine();
}
They are all wrong I just wrote this in about 10 seconds.
With this I managed to just call the object.getQuestion("linenumber") in the main method to return whatever line I want.
public class Questions {
File file = new File("Question2Files/triviagame1.txt");
public Questions() {
}
public String getQuestion(int numLine) throws IOException {
BufferedReader br = new BufferedReader(new FileReader(file));
String line = "";
for(int i = 0; i < numLine; i++) {
line = br.readLine();
}
return line; }}
I have a csv file that currently has 20 lines of data.
The data contains employee info and is in the following format:
first name, last name, Employee ID
So one line would like this: Emma, Nolan, 2
I know how to write to the file in java and have all 20 lines print to the console, but what I'm not sure how to do is how to get Java to print one specific line to the console.
I also want to take the last employee id number in the last entry and have java add 1 to it one I add new employees. I thinking this needs to be done with a counter just not sure how.
You can do something like this:
BufferedReader reader = new BufferedReader(new FileReader(<<your file>>));
List<String> lines = new ArrayList<>();
String line = null;
while ((line = reader.readLine()) != null) {
lines.add(line);
}
System.out.println(lines.get(0));
With BufferedReader you are able to read lines directly. This example reads the file line by line and stores the lines in an array list. You can access the lines after that by using lines.get(lineNumber).
You can read text from a file one line at a time and then do whatever you want to with that line, print it, compare it, etc...
// Construct a BufferedReader object from the input file
BufferedReader r = new BufferedReader(new FileReader("employeeData.txt"));
int i = 1;
try {
// "Prime" the while loop
String line = r.readLine();
while (line != null) {
// Print a single line of input file to console
System.out.print("Line "+i+": "+line);
// Prepare for next loop iteration
line = r.readLine();
i++;
}
} finally {
// Free up file descriptor resources
r.close();
}
// Remember the next available employee number in a one-up scheme
int nextEmployeeId = i;
BufferedReader reader =new BufferedReader(new FileReader("yourfile.csv"));
String line = "";
while((line=reader.readLine())!=null){
String [] employee =line.trim().split(",");
// if you want to check either it contains some name
//index 0 is first name, index 1 is last name, index 2 is ID
}
Alternatively, If you want more control over read CSV files then u can think about CsvBeanReader that will give you more access over files contents..
Here is an algorithm which I use for reading csv files. The most effective way is to read all the data in the csv file into a 2D array first. It just makes it a lot more flexible to manipulate the data.
That way you can specify which line of the file to print to the console by specifying it in the index of the array and using a for. I.e: System.out.println(employee_Data[1][y]); for record 1. y is the index variable for fields. You would need to use a For Loop of course, to print every element for each line.
By the way, if you want to use the employee data in a larger program, in which it may for example store the data in a database or write to another file, I'd recommend encapsulating this entire code block into a function named Read_CSV_File(), which will return a 2D String array.
My Code
// The return type of this function is a String.
// The CSVFile_path can be for example "employeeData.csv".
public static String[][] Read_CSV_File(String CSVFile_path){
String employee_Data[][];
int x;
int y;
int noofFields;
try{
String line;
BufferedReader in = new BufferedReader(new FileReader(CSVFile_path));
// reading files in specified directory
// This assigns the data to the 2D array
// The program keeps looping through until the line read in by the console contains no data in it i.e. the end of the file.
while ( (( line = in.readLine()) != null ){
String[] current_Record = line.split(",");
if(x == 0) {
// Counts the number of fields in the csv file.
noofFields = current_Record.length();
}
for (String str : values) {
employee_Data[x][y] = str;
System.out.print(", "+employee_Data[x][y]);
// The field index variable, y is incremented in every loop.
y = y + 1;
}
// The record index variable, x is incremented in every loop.
x = x + 1;
}
// This frees up the BufferedReader file descriptor resources
in.close();
/* If an error occurs, it is caught by the catch statement and an error message
* is generated and displayed to the user.
*/
}catch( IOException ioException ) {
System.out.println("Exception: "+ioException);
}
// This prints to console the specific line of your choice
System.out.println(("Employee 1:);
for(y = 0; y < noofFields ; y++){
// Prints out all fields of record 1
System.out.print(employee_Data[1][y]+", ");
}
return employee_Data;
}
For reading large file,
log.debug("****************Start Reading CSV File*******");
copyFile(inputCSVFile);
StringBuilder stringBuilder = new StringBuilder();
String line= "";
BufferedReader brOldFile = null;
try {
String inputfile = inputCSVFile;
log.info("inputfile:" + inputfile);
brOldFile = new BufferedReader(new FileReader(inputfile));
while ((line = brOldFile.readLine()) != null) {
//line = replaceSpecialChar(line);
/*do your stuff here*/
stringBuilder.append(line);
stringBuilder.append("\n");
}
log.debug("****************End reading CSV File**************");
} catch (Exception e) {
log.error(" exception in readStaffInfoCSVFile ", e);
}finally {
if(null != brOldFile) {
try {
brOldFile.close();
} catch (IOException e) {
}
}
}
return stringBuilder.toString();