We Keep Coding

Use application.yml to configure logging of embedded Tomcat in Spring Boot

I have a number of questions here (and I'm new to Spring Boot).
Our project's existing codebase uses YAML but no .properties file that I can see anywhere. My reading of usual Spring Boot tutorial uses .properties file.
(1) Is it possible to use application.yml as replacement for application.properties?
(2) Where is the default directory/file where the Spring Boot's embedded Tomcat server dumps its logs?
I need to modify the configuration such that we have custom directory to dump embedded Tomcat server logs. According to here, it should be
server.tomcat.basedir=my-tomcat
server.tomcat.accesslog.enabled=true
server.tomcat.accesslog.pattern=%t %a "%r" %s (%D ms)
That is how it's done if using application.properties way.
(3) Assuming YAML can replace the .properties file entirely, how can I do the above configuration in YAML? Do I need to edit something in the Java source files in order for the configuration in YAML to take effect (that is Tomcat logs going into specific directory that I want)?

Yes. Completely
Spring boot doesn't log to a file by default (as far I know).
Whether you use yaml or properties file, spring boot uses this configuration to bootstrap the application. The below from here
# LOGGING
logging.config= # Location of the logging configuration file. For instance `classpath:logback.xml` for Logback
logging.exception-conversion-word=%wEx # Conversion word used when logging exceptions.
logging.file= # Log file name. For instance `myapp.log`
logging.level.*= # Log levels severity mapping. For instance `logging.level.org.springframework=DEBUG`
logging.path= # Location of the log file. For instance `/var/log`
logging.pattern.console= # Appender pattern for output to the console. Only supported with the default logback setup.
logging.pattern.file= # Appender pattern for output to the file. Only supported with the default logback setup.
logging.pattern.level= # Appender pattern for log level (default %5p). Only supported with the default logback setup.
logging.register-shutdown-hook=false # Register a shutdown hook for the logging system when it is initialized.
server.tomcat.accept-count= # Maximum queue length for incoming connection requests when all possible request processing threads are in use.
server.tomcat.accesslog.buffered=true # Buffer output such that it is only flushed periodically.
server.tomcat.accesslog.directory=logs # Directory in which log files are created. Can be relative to the tomcat base dir or absolute.
server.tomcat.accesslog.enabled=false # Enable access log.
server.tomcat.accesslog.file-date-format=.yyyy-MM-dd # Date format to place in log file name.
server.tomcat.accesslog.pattern=common # Format pattern for access logs.
server.tomcat.accesslog.prefix=access_log # Log file name prefix.
server.tomcat.accesslog.rename-on-rotate=false # Defer inclusion of the date stamp in the file name until rotate time.
server.tomcat.accesslog.request-attributes-enabled=false # Set request attributes for IP address, Hostname, protocol and port used for the request.
server.tomcat.accesslog.rotate=true # Enable access log rotation.
server.tomcat.accesslog.suffix=.log # Log file name suffix.
server.tomcat.additional-tld-skip-patterns= # Comma-separated list of additional patterns that match jars to ignore for TLD scanning.
server.tomcat.background-processor-delay=30 # Delay in seconds between the invocation of backgroundProcess methods.
server.tomcat.basedir= # Tomcat base directory. If not specified a temporary directory will be used.
server.tomcat.internal-proxies=10\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
192\\.168\\.\\d{1,3}\\.\\d{1,3}|\\
169\\.254\\.\\d{1,3}\\.\\d{1,3}|\\
127\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
172\\.1[6-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
172\\.2[0-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3} # regular expression matching trusted IP addresses.
server.tomcat.max-connections= # Maximum number of connections that the server will accept and process at any given time.
server.tomcat.max-http-post-size=0 # Maximum size in bytes of the HTTP post content.
server.tomcat.max-threads=0 # Maximum amount of worker threads.
server.tomcat.min-spare-threads=0 # Minimum amount of worker threads.
server.tomcat.port-header=X-Forwarded-Port # Name of the HTTP header used to override the original port value.
server.tomcat.protocol-header= # Header that holds the incoming protocol, usually named "X-Forwarded-Proto".
server.tomcat.protocol-header-https-value=https # Value of the protocol header that indicates that the incoming request uses SSL.
server.tomcat.redirect-context-root= # Whether requests to the context root should be redirected by appending a / to the path.
server.tomcat.remote-ip-header= # Name of the http header from which the remote ip is extracted. For instance `X-FORWARDED-FOR`
server.tomcat.uri-encoding=UTF-8 # Character encoding to use to decode the URI.
Yes. You can change these to YML. All you need is to replace properties file with yml file. You could even have both in your workspace (spring looks at both application.properties and application.yml)
You can manually do the conversion or even with plugins.
A simple line like
logging.level.netpl.com = DEBUG
changes to
logging:
level:
netpl.com: DEBUG

Why is SonarQube unable to assign requested address?

I am trying to connect to SonarQube through my browser, however I get the following error message after running sonar start from the terminal:
2016.05.19 19:29:59 ERROR web[o.a.c.h.Http11NioProtocol] Failed to initialize end point associated with ProtocolHandler ["http-nio-192.0.0.1-80"]
java.net.BindException: Cannot assign requested address
at sun.nio.ch.Net.bind0(Native Method) ~[na:1.8.0_91]
at sun.nio.ch.Net.bind(Net.java:433) ~[na:1.8.0_91]
at sun.nio.ch.Net.bind(Net.java:425) ~[na:1.8.0_91]
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:223) ~[na:1.8.0_91]
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:74) ~[na:1.8.0_91]
at org.apache.tomcat.util.net.NioEndpoint.bind(NioEndpoint.java:340) ~[tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.tomcat.util.net.AbstractEndpoint.init(AbstractEndpoint.java:742) ~[tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.coyote.AbstractProtocol.init(AbstractProtocol.java:458) ~[tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.coyote.http11.AbstractHttp11JsseProtocol.init(AbstractHttp11JsseProtocol.java:120) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.connector.Connector.initInternal(Connector.java:960) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.core.StandardService.initInternal(StandardService.java:568) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.core.StandardServer.initInternal(StandardServer.java:851) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.util.LifecycleBase.init(LifecycleBase.java:102) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.util.LifecycleBase.start(LifecycleBase.java:139) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.apache.catalina.startup.Tomcat.start(Tomcat.java:344) [tomcat-embed-core-8.0.30.jar:8.0.30]
at org.sonar.server.app.EmbeddedTomcat.start(EmbeddedTomcat.java:62) [sonar-server-5.5.jar:na]
at org.sonar.server.app.WebServer.start(WebServer.java:43) [sonar-server-5.5.jar:na]
at org.sonar.process.ProcessEntryPoint.launch(ProcessEntryPoint.java:102) [sonar-process-5.5.jar:na]
at org.sonar.server.app.WebServer.main(WebServer.java:69) [sonar-server-5.5.jar:na]
It probably has something to do with my configuration, so here's my configuration file:
# Property values can:
# - reference an environment variable, for example sonar.jdbc.url= ${env:SONAR_JDBC_URL}
# - be encrypted. See http://redirect.sonarsource.com/doc/settings-encryption.html
#--------------------------------------------------------------------------------------------------
# DATABASE
#
# IMPORTANT: the embedded H2 database is used by default. It is recommended for tests but not for
# production use. Supported databases are MySQL, Oracle, PostgreSQL and Microsoft SQLServer.
# User credentials.
# Permissions to create tables, indices and triggers must be granted to JDBC user.
# The schema must be created first.
sonar.jdbc.username=sonarqube
sonar.jdbc.password=sonarqube
#----- Embedded Database (default)
# H2 embedded database server listening port, defaults to 9092
# sonar.embeddedDatabase.port=9092
#----- MySQL 5.x
# Only InnoDB storage engine is supported (not myISAM).
# Only the bundled driver is supported. It can not be changed.
sonar.jdbc.url: jdbc:mysql://localhost:3306/sonarqube?useUnicode=true&characterEncoding=utf8&rewriteBatchedStatements=true&useConfigs=maxPerformance
sonar.jdbc.validationQuery: select 1
#----- Oracle 11g/12c
# - Only thin client is supported
# - Only versions 11.2.x and 12.x of Oracle JDBC driver are supported
# - The JDBC driver must be copied into the directory extensions/jdbc-driver/oracle/
# - If you need to set the schema, please refer to http://jira.sonarsource.com/browse/SONAR-5000
#sonar.jdbc.url=jdbc:oracle:thin:#localhost:1521/XE
#----- PostgreSQL 8.x/9.x
# If you don't use the schema named "public", please refer to http://jira.sonarsource.com/browse/SONAR-5000
#sonar.jdbc.url=jdbc:postgresql://localhost/sonar
#----- Microsoft SQLServer 2008/2012/2014 and SQL Azure
# A database named sonar must exist and its collation must be case-sensitive (CS) and accent-sensitive (AS)
# Use the following connection string if you want to use integrated security with Microsoft Sql Server
# Do not set sonar.jdbc.username or sonar.jdbc.password property if you are using Integrated Security
# For Integrated Security to work, you have to download the Microsoft SQL JDBC driver package from
# http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=11774
# and copy sqljdbc_auth.dll to your path. You have to copy the 32 bit or 64 bit version of the dll
# depending upon the architecture of your server machine.
# This version of SonarQube has been tested with Microsoft SQL JDBC version 4.1
#sonar.jdbc.url=jdbc:sqlserver://localhost;databaseName=sonar;integratedSecurity=true
# Use the following connection string if you want to use SQL Auth while connecting to MS Sql Server.
# Set the sonar.jdbc.username and sonar.jdbc.password appropriately.
#sonar.jdbc.url=jdbc:sqlserver://localhost;databaseName=sonar
#----- Connection pool settings
# The maximum number of active connections that can be allocated
# at the same time, or negative for no limit.
# The recommended value is 1.2 * max sizes of HTTP pools. For example if HTTP ports are
# enabled with default sizes (50, see property sonar.web.http.maxThreads)
# then sonar.jdbc.maxActive should be 1.2 * (50) = 120.
#sonar.jdbc.maxActive=60
# The maximum number of connections that can remain idle in the
# pool, without extra ones being released, or negative for no limit.
#sonar.jdbc.maxIdle=5
# The minimum number of connections that can remain idle in the pool,
# without extra ones being created, or zero to create none.
#sonar.jdbc.minIdle=2
# The maximum number of milliseconds that the pool will wait (when there
# are no available connections) for a connection to be returned before
# throwing an exception, or <= 0 to wait indefinitely.
#sonar.jdbc.maxWait=5000
#sonar.jdbc.minEvictableIdleTimeMillis=600000
#sonar.jdbc.timeBetweenEvictionRunsMillis=30000
#--------------------------------------------------------------------------------------------------
# WEB SERVER
# Web server is executed in a dedicated Java process. By default heap size is 768Mb.
# Use the following property to customize JVM options.
# Recommendations:
#
# The HotSpot Server VM is recommended. The property -server should be added if server mode
# is not enabled by default on your environment: http://docs.oracle.com/javase/7/docs/technotes/guides/vm/server-class.html
#
#sonar.web.javaOpts=-Xmx512m -Xms128m -XX:MaxPermSize=160m -XX:+HeapDumpOnOutOfMemoryError -Djava.net.preferIPv4Stack=true
# Same as previous property, but allows to not repeat all other settings like -Xmx
#sonar.web.javaAdditionalOpts=
# Binding IP address. For servers with more than one IP address, this property specifies which
# address will be used for listening on the specified ports.
# By default, ports will be used on all IP addresses associated with the server.
sonar.web.host=192.0.0.1
# Web context. When set, it must start with forward slash (for example /sonarqube).
# The default value is root context (empty value).
# sonar.web.context=/sonarqube
# TCP port for incoming HTTP connections. Disabled when value is -1.
sonar.web.port=80
# The maximum number of connections that the server will accept and process at any given time.
# When this number has been reached, the server will not accept any more connections until
# the number of connections falls below this value. The operating system may still accept connections
# based on the sonar.web.connections.acceptCount property. The default value is 50.
#sonar.web.http.maxThreads=50
# The minimum number of threads always kept running. The default value is 5.
#sonar.web.http.minThreads=5
# The maximum queue length for incoming connection requests when all possible request processing
# threads are in use. Any requests received when the queue is full will be refused.
# The default value is 25.
#sonar.web.http.acceptCount=25
# TCP port for incoming AJP connections. Disabled if value is -1. Disabled by default.
#sonar.ajp.port=-1
#--------------------------------------------------------------------------------------------------
# COMPUTE ENGINE
# The Compute Engine is responsible for processing background tasks.
# Compute Engine is executed in a dedicated Java process. By default heap size is 512Mb.
# Use the following property to customize JVM options.
# Recommendations:
#
# The HotSpot Server VM is recommended. The property -server should be added if server mode
# is not enabled by default on your environment: http://docs.oracle.com/javase/7/docs/technotes/guides/vm/server-class.html
#
#sonar.ce.javaOpts=-Xmx512m -Xms128m -XX:MaxPermSize=160m -XX:+HeapDumpOnOutOfMemoryError -Djava.net.preferIPv4Stack=true
# Same as previous property, but allows to not repeat all other settings like -Xmx
#sonar.ce.javaAdditionalOpts=
# The number of workers in the Compute Engine. Value must be greater than zero.
# By default the Compute Engine uses a single worker and therefore processes tasks one at a time.
# Recommendations:
#
# Using N workers will require N times as much Heap memory (see property
# sonar.ce.javaOpts to tune heap) and produce N times as much IOs on disk, database and
# Elasticsearch. The number of workers must suit your environment.
#sonar.ce.workerCount=1
#--------------------------------------------------------------------------------------------------
# ELASTICSEARCH
# Elasticsearch is used to facilitate fast and accurate information retrieval.
# It is executed in a dedicated Java process.
# JVM options of Elasticsearch process
# Recommendations:
#
# Use HotSpot Server VM. The property -server should be added if server mode
# is not enabled by default on your environment: http://docs.oracle.com/javase/7/docs/technotes/guides/vm/server-class.html
#
#sonar.search.javaOpts=-Xmx1G -Xms256m -Xss256k -Djava.net.preferIPv4Stack=true \
# -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:CMSInitiatingOccupancyFraction=75 \
# -XX:+UseCMSInitiatingOccupancyOnly -XX:+HeapDumpOnOutOfMemoryError
# Same as previous property, but allows to not repeat all other settings like -Xmx
#sonar.search.javaAdditionalOpts=
# Elasticsearch port. Default is 9001. Use 0 to get a free port.
# As a security precaution, should be blocked by a firewall and not exposed to the Internet.
#sonar.search.port=9001
# Elasticsearch host. The search server will bind this address and the search client will connect to it.
# Default is 127.0.0.1.
# As a security precaution, should NOT be set to a publicly available address.
#sonar.search.host=127.0.0.1
#--------------------------------------------------------------------------------------------------
# UPDATE CENTER
# Update Center requires an internet connection to request http://update.sonarsource.org
# It is enabled by default.
#sonar.updatecenter.activate=true
# HTTP proxy (default none)
#http.proxyHost=
#http.proxyPort=
# HTTPS proxy (defaults are values of http.proxyHost and http.proxyPort)
#https.proxyHost=
#https.proxyPort=
# NT domain name if NTLM proxy is used
#http.auth.ntlm.domain=
# SOCKS proxy (default none)
#socksProxyHost=
#socksProxyPort=
# Proxy authentication (used for HTTP, HTTPS and SOCKS proxies)
#http.proxyUser=
#http.proxyPassword=
#--------------------------------------------------------------------------------------------------
# LOGGING
# Level of logs. Supported values are INFO(default), DEBUG and TRACE (DEBUG + SQL + ES requests)
#sonar.log.level=INFO
# Path to log files. Can be absolute or relative to installation directory.
# Default is <installation home>/logs
#sonar.path.logs=logs
# Rolling policy of log files
# - based on time if value starts with "time:", for example by day ("time:yyyy-MM-dd")
# or by month ("time:yyyy-MM")
# - based on size if value starts with "size:", for example "size:10MB"
# - disabled if value is "none". That needs logs to be managed by an external system like logrotate.
#sonar.log.rollingPolicy=time:yyyy-MM-dd
# Maximum number of files to keep if a rolling policy is enabled.
# - maximum value is 20 on size rolling policy
# - unlimited on time rolling policy. Set to zero to disable old file purging.
#sonar.log.maxFiles=7
# Access log is the list of all the HTTP requests received by server. If enabled, it is stored
# in the file {sonar.path.logs}/access.log. This file follows the same rolling policy as for
# sonar.log (see sonar.log.rollingPolicy and sonar.log.maxFiles).
#sonar.web.accessLogs.enable=true
# Format of access log. It is ignored if sonar.web.accessLogs.enable=false. Possible values are:
# - "common" is the Common Log Format, shortcut to: %h %l %u %user %date "%r" %s %b
# - "combined" is another format widely recognized, shortcut to: %h %l %u [%t] "%r" %s %b "%i{Referer}" "%i{User-Agent}"
# - else a custom pattern. See http://logback.qos.ch/manual/layouts.html#AccessPatternLayout.
# If SonarQube is behind a reverse proxy, then the following value allows to display the correct remote IP address:
#sonar.web.accessLogs.pattern=%i{X-Forwarded-For} %l %u [%t] "%r" %s %b "%i{Referer}" "%i{User-Agent}"
# Default value is:
#sonar.web.accessLogs.pattern=combined
#--------------------------------------------------------------------------------------------------
# OTHERS
# Delay in seconds between processing of notification queue. Default is 60 seconds.
#sonar.notifications.delay=60
# Paths to persistent data files (embedded database and search index) and temporary files.
# Can be absolute or relative to installation directory.
# Defaults are respectively <installation home>/data and <installation home>/temp
#sonar.path.data=data
#sonar.path.temp=temp
#--------------------------------------------------------------------------------------------------
# DEVELOPMENT - only for developers
# The following properties MUST NOT be used in production environments.
# Dev mode allows to reload web sources on changes and to restart server when new versions
# of plugins are deployed.
#sonar.web.dev=false
# Path to webapp sources for hot-reloading of Ruby on Rails, JS and CSS (only core,
# plugins not supported).
#sonar.web.dev.sources=/path/to/server/sonar-web/src/main/webapp
# Elasticsearch HTTP connector, for example for KOPF:
# http://lmenezes.com/elasticsearch-kopf/?location=http://localhost:9010
#sonar.search.httpPort=-1
How do I solve this problem?
Software used:
Lubuntu
SonarQube 5.5
Firefox
Solutions I've tried:
- Trying to install sonarqube on linux machine but getting error

The property sonar.web.host is set to 192.0.0.1 in your conf file. localhost can not be resolved to this IP address. You should check /etc/host and fix the mapping.

If you going to use sonarqube only for testing purposes you can update the value in sonar.properties file to:
sonar.web.host=127.0.0.1
sonar.web.context=/
sonar.web.port=9000
Than you can open http://localhost:9000 address.

SonarQube Remote Web Connection

I have installed SonarQube 5.1.2 and finished the basic configuration. I am able to open the web application it in the local server (locahost:port), although I am unable to open it from a remote machine in the same network.
I have a Jenkins server running on the same remote machine that I can access, so it is not a network issue.
Here is my sonar.properties file:
# This file must contain only ISO 8859-1 characters.
# See http://docs.oracle.com/javase/1.5.0/docs/api/java/util/Properties.html#load(java.io.InputStream)
#
# Property values can:
# - reference an environment variable, for example sonar.jdbc.url= ${env:SONAR_JDBC_URL}
# - be encrypted. See http://redirect.sonarsource.com/doc/settings-encryption.html
#--------------------------------------------------------------------------------------------------
# DATABASE
#
# IMPORTANT: the embedded H2 database is used by default. It is recommended for tests but not for
# production use. Supported databases are MySQL, Oracle, PostgreSQL and Microsoft SQLServer.
# User credentials.
# Permissions to create tables, indices and triggers must be granted to JDBC user.
# The schema must be created first.
#sonar.jdbc.username=sonar
#sonar.jdbc.password=sonar
#----- Embedded Database (default)
# It does not accept connections from remote hosts, so the
# server and the analyzers must be executed on the same host.
#sonar.jdbc.url=jdbc:h2:tcp://localhost:9092/sonar
# H2 embedded database server listening port, defaults to 9092
#sonar.embeddedDatabase.port=9092
#----- MySQL 5.x
# Only InnoDB storage engine is supported (not myISAM).
# Only the bundled driver is supported.
#sonar.jdbc.url=jdbc:mysql://localhost:3306/sonar?useUnicode=true&characterEncoding=utf8&rewriteBatchedStatements=true&useConfigs=maxPerformance
#----- Oracle 10g/11g
# - Only thin client is supported
# - Only versions 11.2.* of Oracle JDBC driver are supported, even if connecting to lower Oracle versions.
# - The JDBC driver must be copied into the directory extensions/jdbc-driver/oracle/
# - If you need to set the schema, please refer to http://jira.codehaus.org/browse/SONAR-5000
#sonar.jdbc.url=jdbc:oracle:thin:#localhost/XE
#----- PostgreSQL 8.x/9.x
# If you don't use the schema named "public", please refer to http://jira.codehaus.org/browse/SONAR-5000
#sonar.jdbc.url=jdbc:postgresql://localhost/sonar
#----- Microsoft SQLServer 2008/2012
# Only the bundled jTDS driver is supported.
# Collation must be case-sensitive (CS) and accent-sensitive (AS).
#sonar.jdbc.url=jdbc:jtds:sqlserver://localhost/sonar;SelectMethod=Cursor
#----- Connection pool settings
# The maximum number of active connections that can be allocated
# at the same time, or negative for no limit.
#sonar.jdbc.maxActive=50
# The maximum number of connections that can remain idle in the
# pool, without extra ones being released, or negative for no limit.
#sonar.jdbc.maxIdle=5
# The minimum number of connections that can remain idle in the pool,
# without extra ones being created, or zero to create none.
#sonar.jdbc.minIdle=2
# The maximum number of milliseconds that the pool will wait (when there
# are no available connections) for a connection to be returned before
# throwing an exception, or <= 0 to wait indefinitely.
#sonar.jdbc.maxWait=5000
#sonar.jdbc.minEvictableIdleTimeMillis=600000
#sonar.jdbc.timeBetweenEvictionRunsMillis=30000
#--------------------------------------------------------------------------------------------------
# WEB SERVER
# Web server is executed in a dedicated Java process. By default heap size is 768Mb.
# Use the following property to customize JVM options.
# Recommendations:
#
# The HotSpot Server VM is recommended. The property -server should be added if server mode
# is not enabled by default on your environment: http://docs.oracle.com/javase/7/docs/technotes/guides/vm/server-class.html
#
# Set min and max memory (respectively -Xms and -Xmx) to the same value to prevent heap
# from resizing at runtime.
#
#sonar.web.javaOpts=-Xmx768m -XX:MaxPermSize=160m -XX:+HeapDumpOnOutOfMemoryError
# Same as previous property, but allows to not repeat all other settings like -Xmx
#sonar.web.javaAdditionalOpts=
# Binding IP address. For servers with more than one IP address, this property specifies which
# address will be used for listening on the specified ports.
# By default, ports will be used on all IP addresses associated with the server.
#sonar.web.host=0.0.0.0
sonar.web.host=172.29.14.63
# Web context. When set, it must start with forward slash (for example /sonarqube).
# The default value is root context (empty value).
#sonar.web.context=
# TCP port for incoming HTTP connections. Disabled when value is -1.
#sonar.web.port=9000
sonar.web.port=9090
# Recommendation for HTTPS
# SonarQube natively supports HTTPS. However using a reverse proxy
# infrastructure is the recommended way to set up your SonarQube installation
# on production environments which need to be highly secured.
# This allows to fully master all the security parameters that you want.
# TCP port for incoming HTTPS connections. Disabled when value is -1 (default).
#sonar.web.https.port=-1
# HTTPS - the alias used to for the server certificate in the keystore.
# If not specified the first key read in the keystore is used.
#sonar.web.https.keyAlias=
# HTTPS - the password used to access the server certificate from the
# specified keystore file. The default value is "changeit".
#sonar.web.https.keyPass=changeit
# HTTPS - the pathname of the keystore file where is stored the server certificate.
# By default, the pathname is the file ".keystore" in the user home.
# If keystoreType doesn't need a file use empty value.
#sonar.web.https.keystoreFile=
# HTTPS - the password used to access the specified keystore file. The default
# value is the value of sonar.web.https.keyPass.
#sonar.web.https.keystorePass=
# HTTPS - the type of keystore file to be used for the server certificate.
# The default value is JKS (Java KeyStore).
#sonar.web.https.keystoreType=JKS
# HTTPS - the name of the keystore provider to be used for the server certificate.
# If not specified, the list of registered providers is traversed in preference order
# and the first provider that supports the keystore type is used (see sonar.web.https.keystoreType).
#sonar.web.https.keystoreProvider=
# HTTPS - the pathname of the truststore file which contains trusted certificate authorities.
# By default, this would be the cacerts file in your JRE.
# If truststoreFile doesn't need a file use empty value.
#sonar.web.https.truststoreFile=
# HTTPS - the password used to access the specified truststore file.
#sonar.web.https.truststorePass=
# HTTPS - the type of truststore file to be used.
# The default value is JKS (Java KeyStore).
#sonar.web.https.truststoreType=JKS
# HTTPS - the name of the truststore provider to be used for the server certificate.
# If not specified, the list of registered providers is traversed in preference order
# and the first provider that supports the truststore type is used (see sonar.web.https.truststoreType).
#sonar.web.https.truststoreProvider=
# HTTPS - whether to enable client certificate authentication.
# The default is false (client certificates disabled).
# Other possible values are 'want' (certificates will be requested, but not required),
# and 'true' (certificates are required).
#sonar.web.https.clientAuth=false
# HTTPS - comma separated list of encryption ciphers to support for HTTPS connections.
# If specified, only the ciphers that are listed and supported by the SSL implementation will be used.
# By default, the default ciphers for the JVM will be used. Note that this usually means that the weak
# export grade ciphers, for instance RC4, will be included in the list of available ciphers.
# The ciphers are specified using the JSSE cipher naming convention (see
# https://www.openssl.org/docs/apps/ciphers.html)
# Example: sonar.web.https.ciphers=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256,TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384
#sonar.web.https.ciphers=
# The maximum number of connections that the server will accept and process at any given time.
# When this number has been reached, the server will not accept any more connections until
# the number of connections falls below this value. The operating system may still accept connections
# based on the sonar.web.connections.acceptCount property. The default value is 50 for each
# enabled connector.
#sonar.web.http.maxThreads=50
#sonar.web.https.maxThreads=50
# The minimum number of threads always kept running. The default value is 5 for each
# enabled connector.
#sonar.web.http.minThreads=5
#sonar.web.https.minThreads=5
# The maximum queue length for incoming connection requests when all possible request processing
# threads are in use. Any requests received when the queue is full will be refused.
# The default value is 25 for each enabled connector.
#sonar.web.http.acceptCount=25
#sonar.web.https.acceptCount=25
# TCP port for incoming AJP connections. Disabled if value is -1. Disabled by default.
#sonar.ajp.port=-1
#--------------------------------------------------------------------------------------------------
# ELASTICSEARCH
# Elasticsearch is used to facilitate fast and accurate information retrieval.
# It is executed in a dedicated Java process.
# JVM options of Elasticsearch process
# Recommendations:
#
# Use HotSpot Server VM. The property -server should be added if server mode
# is not enabled by default on your environment: http://docs.oracle.com/javase/7/docs/technotes/guides/vm/server-class.html
#
# Set min and max memory (respectively -Xms and -Xmx) to the same value to prevent heap
# from resizing at runtime.
#
#sonar.search.javaOpts=-Xmx1G -Xms256m -Xss256k -Djava.net.preferIPv4Stack=true \
# -XX:+UseParNewGC -XX:+UseConcMarkSweepGC -XX:CMSInitiatingOccupancyFraction=75 \
# -XX:+UseCMSInitiatingOccupancyOnly -XX:+HeapDumpOnOutOfMemoryError
# Same as previous property, but allows to not repeat all other settings like -Xmx
#sonar.search.javaAdditionalOpts=
# Elasticsearch port. Default is 9001. Use 0 to get a free port.
# This port must be private and must not be exposed to the Internet.
#sonar.search.port=9001
#--------------------------------------------------------------------------------------------------
# UPDATE CENTER
# Update Center requires an internet connection to request http://update.sonarsource.org
# It is enabled by default.
#sonar.updatecenter.activate=true
# HTTP proxy (default none)
#http.proxyHost=
#http.proxyPort=
# NT domain name if NTLM proxy is used
#http.auth.ntlm.domain=
# SOCKS proxy (default none)
#socksProxyHost=
#socksProxyPort=
# proxy authentication. The 2 following properties are used for HTTP and SOCKS proxies.
#http.proxyUser=
#http.proxyPassword=
#--------------------------------------------------------------------------------------------------
# LOGGING
# Level of logs. Supported values are INFO, DEBUG and TRACE
#sonar.log.level=INFO
# Path to log files. Can be absolute or relative to installation directory.
# Default is <installation home>/logs
#sonar.path.logs=logs
# Rolling policy of log files
# - based on time if value starts with "time:", for example by day ("time:yyyy-MM-dd")
# or by month ("time:yyyy-MM")
# - based on size if value starts with "size:", for example "size:10MB"
# - disabled if value is "none". That needs logs to be managed by an external system like logrotate.
#sonar.log.rollingPolicy=time:yyyy-MM-dd
# Maximum number of files to keep if a rolling policy is enabled.
# - maximum value is 20 on size rolling policy
# - unlimited on time rolling policy. Set to zero to disable old file purging.
#sonar.log.maxFiles=7
# Access log is the list of all the HTTP requests received by server. If enabled, it is stored
# in the file {sonar.path.logs}/access.log. This file follows the same rolling policy as for
# sonar.log (see sonar.log.rollingPolicy and sonar.log.maxFiles).
#sonar.web.accessLogs.enable=true
# Format of access log. It is ignored if sonar.web.accessLogs.enable=false. Value is:
# - "common" is the Common Log Format (shortcut for: %h %l %u %user %date "%r" %s %b)
# - "combined" is another format widely recognized (shortcut for: %h %l %u [%t] "%r" %s %b "%i{Referer}" "%i{User-Agent}")
# - else a custom pattern. See http://logback.qos.ch/manual/layouts.html#AccessPatternLayout
#sonar.web.accessLogs.pattern=combined
#--------------------------------------------------------------------------------------------------
# OTHERS
# Delay in seconds between processing of notification queue. Default is 60 seconds.
#sonar.notifications.delay=60
# Paths to persistent data files (embedded database and search index) and temporary files.
# Can be absolute or relative to installation directory.
# Defaults are respectively <installation home>/data and <installation home>/temp
#sonar.path.data=data
#sonar.path.temp=temp
#--------------------------------------------------------------------------------------------------
# DEVELOPMENT - only for developers
# The following properties MUST NOT be used in production environments.
# Dev mode allows to reload web sources on changes and to restart server when new versions
# of plugins are deployed.
#sonar.web.dev=false
# Path to webapp sources for hot-reloading of Ruby on Rails, JS and CSS (only core,
# plugins not supported).
#sonar.web.dev.sources=/path/to/server/sonar-web/src/main/webapp
# Uncomment to enable the Elasticsearch HTTP connector, so that ES can be directly requested through
# http://lmenezes.com/elasticsearch-kopf/?location=http://localhost:9010
#sonar.search.httpPort=9010
I have already tryied the sonar.web.host property to 0.0.0.0, 127.0.0.1 or the server network IP but still no success.
Is there any other configuration I should do in order to atchieve this?

Startup issue at java application running as windows service using thanuki service wrapper

I've written a swing application, I want to make it as one of my windows service.For this I used
tanukisoftware service wrapper. I found it from bellow areas,TanukiServiceWrapper and workingProcess
I followed configurations in application.conf file.this is my conf file..
#encoding=UTF-8
# Configuration files must begin with a line specifying the encoding
# of the the file.
#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
# License Key to start. Licenses can be purchased or a trial license
# requested on the following pages:
# http://wrapper.tanukisoftware.com/purchase
# http://wrapper.tanukisoftware.com/trial
# Include file problems can be debugged by removing the first '#'
# from the following line:
#include.debug
# The Wrapper will look for either of the following optional files for a
# valid License Key. License Key properties can optionally be included
# directly in this configuration file.
#include ../conf/wrapper-license.conf
#include ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf
# The following property will output information about which License Key(s)
# are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE
#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the locale which the Wrapper should use. By default the system
# locale is used.
#wrapper.lang=en_US # en_US or ja_JP
# Specify the location of the Wrapper's language resources. If these are
# missing, the Wrapper will default to the en_US locale.
wrapper.lang.folder=../lang
#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
# Locate the java binary on the system PATH:
#wrapper.java.command=C:\Program Files\Java\jdk1.7.0_09\bin\java
wrapper.java.command=java
wrapper.working.dir =C:\replicator_wrapper\bin
# Specify a specific java binary:
#set.JAVA_HOME=/java/path
#wrapper.java.command=%JAVA_HOME%/bin/java
# Tell the Wrapper to log the full generated Java command line.
#wrapper.java.command.loglevel=INFO
# Java Main class. This class must implement the WrapperListener interface
# or guarantee that the WrapperManager class is initialized. Helper
# classes are provided to do this for you. See the Integration section
# of the documentation for details.
wrapper.java.mainclass=com.abc.replicator.client.Processor
# Java Classpath (include wrapper.jar) Add class path elements as
# needed starting from 1
wrapper.java.classpath.1=../lib/wrapper.jar
wrapper.java.classpath.2=../lib/classes
wrapper.java.classpath.3=../lib/replicator.jar
wrapper.java.classpath.4=../lib/appJars/*
# Java Library Path (location of Wrapper.DLL or libwrapper.so)
wrapper.java.library.path.1=../lib/*
# Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE
# Java Additional Parameters
wrapper.java.additional.1=
# Initial Java Heap Size (in MB)
#wrapper.java.initmemory=3
# Maximum Java Heap Size (in MB)
#wrapper.java.maxmemory=64
# Application parameters. Add parameters as needed starting from 1
wrapper.app.parameter.1=com.imedx.replicator.client.Processor
#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
# wrapper.debug=TRUE
# Format of output for the console. (See docs for formats)
wrapper.console.format=PM
# Log Level for console output. (See docs for log levels)
wrapper.console.loglevel=INFO
# Log file to use for wrapper output logging.
wrapper.logfile=../logs/wrapper.log
# Format of output for the log file. (See docs for formats)
wrapper.logfile.format=LPTM
# Log Level for log file output. (See docs for log levels)
wrapper.logfile.loglevel=INFO
# Maximum size that the log file will be allowed to grow to before
# the log is rolled. Size is specified in bytes. The default value
# of 0, disables log rolling. May abbreviate with the 'k' (kb) or
# 'm' (mb) suffix. For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=0
# Maximum number of rolled log files which will be allowed before old
# files are deleted. The default value of 0 implies no limit.
wrapper.logfile.maxfiles=0
# Log Level for sys/event log output. (See docs for log levels)
wrapper.syslog.loglevel=NONE
#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE
# Do not start if the pid file already exists.
wrapper.pidfile.strict=TRUE
# Title to use when running as a console
wrapper.console.title=Replicator
#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=60
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL
# Out Of Memory detection.
# Ignore -verbose:class output to avoid false positives.
wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError
wrapper.filter.action.1000=NONE
# (Simple match)
wrapper.filter.trigger.1001=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1001=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1001=TRUE
wrapper.filter.action.1001=RESTART
wrapper.filter.message.1001=The JVM has run out of memory.
#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=<SMTP_Host>
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=<Sender email>
#wrapper.event.default.email.recipient=<Recipient email>
# Configure the log attached to event emails.
#wrapper.event.default.email.attach_log=TRUE
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO
# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE
# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n
#********************************************************************
# Wrapper Windows NT/2000/XP Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
# using this configuration file has been installed as a service.
# Please uninstall the service before modifying this section. The
# service can then be reinstalled.
# Name of the service
wrapper.name=replicator
# Display name of the service
wrapper.displayname=Replicator
# Description of the service
wrapper.description=Replicator
# Service dependencies. Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=
# Mode in which the service is installed. AUTO_START, DELAY_START or DEMAND_START
wrapper.ntservice.starttype=AUTO_START
# Allow the service to interact with the desktop.
wrapper.ntservice.interactive=true
wrapper.logfile=../logs/wrapper.log
wrapper.console.title=Replicator
wrapper.name=replicator
wrapper.displayname=Replicator Application
wrapper.description=Replicator App
wrapper.ntservice.starttype=AUTO_START
wrapper.single_invocation=FALSE
wrapper.share.1.type=ANY
wrapper.registry.java_home=C:\Program Files\Java\jdk1.7.0_09
wrapper.ntservice.process_priority=NORMAL
wrapper.ntservice.console=TRUE
wrapper.ntservice.generate_console=TRUE
wrapper.ntservice.hide_console=FALSE
wrapper.ntservice.starttype=DEMAND_START
wrapper.ntservice.pausable=FALSE
wrapper.ntservice.account=NT AUTHORITY\LocalService
wrapper.ntservice.recovery.1.failure=RESTART
After the completion of all configuration before installing my app to service ,I tested weather the app is running or not by executing the replicator. no issues founded in command-prompt. see the attachment. and the conf folder having wrapper.conf and wrapper-license.conf,
bin folder having AppReplicator.bat,InstallReplicator-NT.bat,replicator.bat,replicator.jar,wrapper.exe,UnInstallReplicator-NT.bat and start,stop etc bat files. I placed all the files in proper locations.
But when I install my application as a service ,it getting installed but when I try to launch it prompting up an error message
please correct me if I'm doing any wrong or else drive me in other approaches
thanks in advance,
Arun

If your service has an UI part, you must use the JavaExe free tool to create an interactive service.

finally I achieved my goal. I used open source apache commons procrun instead of thanuki wrapper.
After many number of failed attempts I succeeded. My java application now acting as a windows service.
download the sample from here and do the appropriate changes to make your app as a service. there is a
pdf document which is showing the instructions.Extract the sample from here procrun_sample_implementation
rename the existed .exe files with your app name and modify the script.
after the completion of entire set up, in the console at the folder where your app.exe files existed, run the script which is modified according to your application need.now the service is going to be installed.
I abstracted all this stuff from here..
create windows service
thanks to Mr.ARIF for maintaining such an useful blog.
if you want to delete the installed service just run this..
C:\windows\system32>sc delete your_service_name

Integrate Apache storm with zookeeper in windows

Can anyone help me how to integrate storm with zookeeper in windows.
I try to find the find a good installation steps for production in windows but I can't.
Write now I have installed stand alone zookeeper and I am trying to configure it in the storm.yaml.
sample code I tried :
storm.zookeeper.servers:
- "127.0.0.1"
- "server2"
storm.zookeeper.port: 2180
nimbus.host: "localhost"
If any body knows please help me.

Please follow the below steps for complete installation of storm with zookeeper in windows
1. create a zoo.cfg file under /conf directory of zookeeper.
here are the configuration entries
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
dataDir=D:\\workspace\\zk-data
# the port at which the clients will connect
clientPort=2181
2.run the zookeeper by executing the zkServer.bat in /bin directory
3.create the storm.yaml file in /conf directory of the apache-storm
here are the configuration entries
########### These MUST be filled in for a storm configuration
storm.zookeeper.servers:
- "localhost"
#supervisor.slots.ports:
# - 6700
# - 6701
# - 6702
# - 6703
storm.local.dir: D:\\workspace\\storm-data
nimbus.host: "localhost"
#
#
4.run the below commands from the command prompt
a. bin\storm nimbus
b. bin\storm supervisor
c. bin\storm ui
hit the browser with localhost:8080 to see the nimbus ui
6.make sure your JAVA_HOME path does not have any space. otherwise storm command
will not run.