Related
I'm getting a NoSuchMethodError error when running my Java program. What's wrong and how do I fix it?
Without any more information it is difficult to pinpoint the problem, but the root cause is that you most likely have compiled a class against a different version of the class that is missing a method, than the one you are using when running it.
Look at the stack trace ... If the exception appears when calling a method on an object in a library, you are most likely using separate versions of the library when compiling and running. Make sure you have the right version both places.
If the exception appears when calling a method on objects instantiated by classes you made, then your build process seems to be faulty. Make sure the class files that you are actually running are updated when you compile.
I was having your problem, and this is how I fixed it. The following steps are a working way to add a library. I had done the first two steps right, but I hadn't done the last one by dragging the ".jar" file direct from the file system into the "lib" folder on my eclipse project. Additionally, I had to remove the previous version of the library from both the build path and the "lib" folder.
Step 1 - Add .jar to build path
Step 2 - Associate sources and javadocs (optional)
Step 3 - Actually drag .jar file into "lib" folder (not optional)
Note that in the case of reflection, you get an NoSuchMethodException, while with non-reflective code, you get NoSuchMethodError. I tend to go looking in very different places when confronted with one versus the other.
If you have access to change the JVM parameters, adding verbose output should allow you to see what classes are being loaded from which JAR files.
java -verbose:class <other args>
When your program is run, the JVM should dump to standard out information such as:
...
[Loaded junit.framework.Assert from file:/C:/Program%20Files/junit3.8.2/junit.jar]
...
If using Maven or another framework, and you get this error almost randomly, try a clean install like...
clean install
This is especially likely to work if you wrote the object and you know it has the method.
This is usually caused when using a build system like Apache Ant that only compiles java files when the java file is newer than the class file. If a method signature changes and classes were using the old version things may not be compiled correctly. The usual fix is to do a full rebuild (usually "ant clean" then "ant").
Sometimes this can also be caused when compiling against one version of a library but running against a different version.
I had the same error:
Exception in thread "main" java.lang.NoSuchMethodError: com.fasterxml.jackson.core.JsonGenerator.writeStartObject(Ljava/lang/Object;)V
at com.fasterxml.jackson.databind.ser.BeanSerializer.serialize(BeanSerializer.java:151)
at com.fasterxml.jackson.databind.ser.DefaultSerializerProvider.serializeValue(DefaultSerializerProvider.java:292)
at com.fasterxml.jackson.databind.ObjectMapper._configAndWriteValue(ObjectMapper.java:3681)
at com.fasterxml.jackson.databind.ObjectMapper.writeValueAsString(ObjectMapper.java:3057)
To solve it I checked, firstly, Module Dependency Diagram (click in your POM the combination -> Ctrl+Alt+Shift+U or right click in your POM -> Maven -> Show dependencies) to understand where exactly was the conflict between libraries (Intelij IDEA). In my particular case, I had different versions of Jackson dependencies.
1) So, I added directly in my POM of the project explicitly the highest version - 2.8.7 of these two.
In properties:
<jackson.version>2.8.7</jackson.version>
And as dependency:
<dependency>
<groupId>com.fasterxml.jackson.core</groupId>
<artifactId>jackson-databind</artifactId>
<version>${jackson.version}</version>
</dependency>
2) But also it can be solved using Dependency Exclusions.
By the same principle as below in example:
<dependency>
<groupId>group-a</groupId>
<artifactId>artifact-a</artifactId>
<version>1.0</version>
<exclusions>
<exclusion>
<groupId>com.fasterxml.jackson.core</groupId>
<artifactId>jackson-databind</artifactId>
</exclusion>
</exclusions>
</dependency>
Dependency with unwanted version will be excluded from your project.
This can also be the result of using reflection. If you have code that reflects on a class and extracts a method by name (eg: with Class.getDeclaredMethod("someMethodName", .....)) then any time that method name changes, such as during a refactor, you will need to remember to update the parameters to the reflection method to match the new method signature, or the getDeclaredMethod call will throw a NoSuchMethodException.
If this is the reason, then the stack trace should show the point that the reflection method is invoked, and you'll just need to update the parameters to match the actual method signature.
In my experience, this comes up occasionally when unit testing private methods/fields, and using a TestUtilities class to extract fields for test verification. (Generally with legacy code that wasn't designed with unit testing in mind.)
If you are writing a webapp, ensure that you don't have conflicting versions of a jar in your container's global library directory and also in your app. You may not necessarily know which jar is being used by the classloader.
e.g.
tomcat/common/lib
mywebapp/WEB-INF/lib
For me it happened because I changed argument type in function, from Object a, to String a. I could resolve it with clean and build again
In my case I had a multi module project and scenario was like com.xyz.TestClass was in module A and as well as in module B and module A was dependent on module B. So while creating a assembly jar I think only one version of class was retained if that doesn't have the invoked method then I was getting NoSuchMethodError runtime exception, but compilation was fine.
Related : https://reflectoring.io/nosuchmethod/
Why anybody doesn't mention dependency conflicts? This common problem can be related to included dependency jars with different versions.
Detailed explanation and solution: https://dzone.com/articles/solving-dependency-conflicts-in-maven
Short answer;
Add this maven dependency;
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-enforcer-plugin</artifactId>
<version>3.0.0-M3</version>
<configuration>
<rules>
<dependencyConvergence />
</rules>
</configuration>
</plugin>
Then run this command;
mvn enforcer:enforce
Maybe this is the cause your the issue you faced.
It means the respective method is not present in the class:
If you are using jar then decompile and check if the respective version of jar have proper class.
Check if you have compiled proper class from your source.
I have just solved this error by restarting my Eclipse and run the applcation.
The reason for my case may because I replace my source files without closing my project or Eclipse.
Which caused different version of classes I was using.
Try this way: remove all .class files under your project directories (and, of course, all subdirectories). Rebuild.
Sometimes mvn clean (if you are using maven) does not clean .class files manually created by javac. And those old files contain old signatures, leading to NoSuchMethodError.
Just adding to existing answers. I was facing this issue with tomcat in eclipse. I had changed one class and did following steps,
Cleaned and built the project in eclpise
mvn clean install
Restarted tomcat
Still I was facing same error. Then I cleaned tomcat, cleaned tomcat working directory and restarted server and my issue is gone. Hope this helps someone
These problems are caused by the use of the same object at the same two classes.
Objects used does not contain new method has been added that the new object class contains.
ex:
filenotnull=/DayMoreConfig.conf
16-07-2015 05:02:10:ussdgw-1: Open TCP/IP connection to SMSC: 10.149.96.66 at 2775
16-07-2015 05:02:10:ussdgw-1: Bind request: (bindreq: (pdu: 0 9 0 [1]) 900 900 GEN 52 (addrrang: 0 0 2000) )
Exception in thread "main" java.lang.NoSuchMethodError: gateway.smpp.PDUEventListener.<init>(Lgateway/smpp/USSDClient;)V
at gateway.smpp.USSDClient.bind(USSDClient.java:139)
at gateway.USSDGW.initSmppConnection(USSDGW.java:274)
at gateway.USSDGW.<init>(USSDGW.java:184)
at com.vinaphone.app.ttn.USSDDayMore.main(USSDDayMore.java:40)
-bash-3.00$
These problems are caused by the concomitant 02 similar class (1 in src, 1 in jar file here is gateway.jar)
To answer the original question. According to java docs here:
"NoSuchMethodError" Thrown if an application tries to call a specified method of a class (either static or instance), and that class no longer has a definition of that method.
Normally, this error is caught by the compiler; this error can only occur at run time if the definition of a class has incompatibly changed.
If it happens in the run time, check the class containing the method is in class path.
Check if you have added new version of JAR and the method is compatible.
I fixed this problem in Eclipse by renaming a Junit test file.
In my Eclipse work space I have an App project and a Test project.
The Test project has the App project as a required project on the build path.
Started getting the NoSuchMethodError.
Then I realized the class in the Test project had the same name as the class in the App project.
App/
src/
com.example/
Projection.java
Test/
src/
com.example/
Projection.java
After renaming the Test to the correct name "ProjectionTest.java" the exception went away.
NoSuchMethodError : I have spend couple of hours fixing this issue, finally fixed it by just renaming package name , clean and build ... Try clean build first if it doesn't works try renaming the class name or package name and clean build...it should be fixed. Good luck.
I ran into a similar problem when I was changing method signatures in my application.
Cleaning and rebuilding my project resolved the "NoSuchMethodError".
Above answer explains very well ..just to add one thing
If you are using using eclipse use ctrl+shift+T and enter package structure of class (e.g. : gateway.smpp.PDUEventListener ), you will find all jars/projects where it's present. Remove unnecessary jars from classpath or add above in class path. Now it will pick up correct one.
I ran into similar issue.
Caused by: java.lang.NoSuchMethodError: com.abc.Employee.getEmpId()I
Finally I identified the root cause was changing the data type of variable.
Employee.java --> Contains the variable (EmpId) whose Data Type has been changed from int to String.
ReportGeneration.java --> Retrieves the value using the getter, getEmpId().
We are supposed to rebundle the jar by including only the modified classes. As there was no change in ReportGeneration.java I was only including the Employee.class in Jar file. I had to include the ReportGeneration.class file in the jar to solve the issue.
I've had the same problem. This is also caused when there is an ambiguity in classes. My program was trying to invoke a method which was present in two JAR files present in the same location / class path. Delete one JAR file or execute your code such that only one JAR file is used. Check that you are not using same JAR or different versions of the same JAR that contain the same class.
DISP_E_EXCEPTION [step] [] [Z-JAVA-105 Java exception java.lang.NoSuchMethodError(com.example.yourmethod)]
Most of the times java.lang.NoSuchMethodError is caught be compiler but sometimes it can occur at runtime. If this error occurs at runtime then the only reason could be the change in the class structure that made it incompatible.
Best Explanation: https://www.journaldev.com/14538/java-lang-nosuchmethoderror
I've encountered this error too.
My problem was that I've changed a method's signature, something like
void invest(Currency money){...}
into
void invest(Euro money){...}
This method was invoked from a context similar to
public static void main(String args[]) {
Bank myBank = new Bank();
Euro capital = new Euro();
myBank.invest(capital);
}
The compiler was silent with regard to warnings/ errors, as capital is both Currency as well as Euro.
The problem appeared due to the fact that I only compiled the class in which the method was defined - Bank, but not the class from which the method is being called from, which contains the main() method.
This issue is not something you might encounter too often, as most frequently the project is rebuilt mannually or a Build action is triggered automatically, instead of just compiling the one modified class.
My usecase was that I generated a .jar file which was to be used as a hotfix, that did not contain the App.class as this was not modified. It made sense to me not to include it as I kept the initial argument's base class trough inheritance.
The thing is, when you compile a class, the resulting bytecode is kind of static, in other words, it's a hard-reference.
The original disassembled bytecode (generated with the javap tool) looks like this:
#7 = Methodref #2.#22 // Bank.invest:(LCurrency;)V
After the ClassLoader loads the new compiled Bank.class, it will not find such a method, it appears as if it was removed and not changed, thus the named error.
Hope this helps.
The problem in my case was having two versions of the same library in the build path. The older version of the library didn't have the function, and newer one did.
I had a similar problem with my Gradle Project using Intelij.
I solved it by deleting the .gradle (see screenshot below) Package and rebuilding the Project.
.gradle Package
I had faced the same issue. I changed the return type of one method and ran the test code of that one class. That is when I faced this NoSuchMethodError. As a solution, I ran the maven builds on the entire repository once, before running the test code again. The issue got resolved in the next single test run.
One such instance where this error occurs:
I happened to make a silly mistake of accessing private static member variables in a non static method. Changing the method to static solved the problem.
Recently I've been working on report generation with Jasper. I have created a simple program to test it and when running it via IDE it did work fine.
Then I moved the (very short) class to WildFly sever application and despite having the exact same code and library generation fails with cannot find symbol. Those symbols it cannot find are JREvaluator, JRFillVariable as well as packages such as net.sf.jasperreports.engine
In so far I have confirmed that:
Project builds (meaning those classes are visible for javac, but not jvm)
jasperreports-6.13.0.jar is added to war (it's present in /WEB-INF/lib folder alongside other libraries, like gson and hibernate
jasperreports-6.13.0.jar contains the missing classes
It looks to me like the problem doesn't lie in library not being loaded or missing classes (because in testing environment it works), but like something was preventing JBoss class loader from loading those classes
Attempted (and failed) solutions
Clean and Build
Adding -Djava.awt.headless=true to VM options - this did not changed anything
Adding -Djava.awt.headless=false to VM options - also didn't change a thing, but once caused NullPointerException inside jasperreport library. For testing program - worked in both cases
Adding commons-beanutils-1.9.4.jar, commons-digester-2.1.jar, commons-collections4-4.4.jar and commons-loggin-1.2.jar - with no changes
Adding jasper-compiler-jdt-5.5.23.jar - this caused a different error, namely NoSuchMethodError for org.eclipse.jdt.internal.compiler.ICompilerRequestor and few others. This library however should not be necessary as - from what I understand - jasperreport-6.13.0.jar already contains it's compiler and separate library for compiler is not required since a long time.
What has not been attempted:
Forcing the classes to load (http://www.java2s.com/Code/Java/Reflection/Forcethegivenclasstobeloadedfully.htm)
Dynamically loading jar during Runtime or using custom class loader
Update: after looking at this answer and applying the suggestion the missing class was different. Which suggests that the dependencies inside jasperreport.jar are not being loaded properly
I have figured it out
For some reason in server project libraries used by jasperreport.jar were not loaded, but in the testing project they were (might be due to WildFly, might be due to differences between IntelliJ and NetBeans)
Here is the list of libraries, based on pom.xml file in jasperreport.jar that I have added. Some might not be necessary and the list might not be exhaustive (I basically stopped adding libraries once report started generating) but it's good enough base if someone else runs into this problem:
commons-beanutils-1.9.4.jar
itext-2.1.7.jar
poi-ooxml-4.1.1.jar
commons-collections4-4.4.jar
jcommon-1.0.23.jar
xalan-2.7.2.jar
commons-digester-2.1.jar
jfreechart-1.0.19.jar
xmpcore-5.1.3.jar
commons-logging-1.2.jar
poi-4.1.1.jar
I'm getting a NoSuchMethodError error when running my Java program. What's wrong and how do I fix it?
Without any more information it is difficult to pinpoint the problem, but the root cause is that you most likely have compiled a class against a different version of the class that is missing a method, than the one you are using when running it.
Look at the stack trace ... If the exception appears when calling a method on an object in a library, you are most likely using separate versions of the library when compiling and running. Make sure you have the right version both places.
If the exception appears when calling a method on objects instantiated by classes you made, then your build process seems to be faulty. Make sure the class files that you are actually running are updated when you compile.
I was having your problem, and this is how I fixed it. The following steps are a working way to add a library. I had done the first two steps right, but I hadn't done the last one by dragging the ".jar" file direct from the file system into the "lib" folder on my eclipse project. Additionally, I had to remove the previous version of the library from both the build path and the "lib" folder.
Step 1 - Add .jar to build path
Step 2 - Associate sources and javadocs (optional)
Step 3 - Actually drag .jar file into "lib" folder (not optional)
Note that in the case of reflection, you get an NoSuchMethodException, while with non-reflective code, you get NoSuchMethodError. I tend to go looking in very different places when confronted with one versus the other.
If you have access to change the JVM parameters, adding verbose output should allow you to see what classes are being loaded from which JAR files.
java -verbose:class <other args>
When your program is run, the JVM should dump to standard out information such as:
...
[Loaded junit.framework.Assert from file:/C:/Program%20Files/junit3.8.2/junit.jar]
...
If using Maven or another framework, and you get this error almost randomly, try a clean install like...
clean install
This is especially likely to work if you wrote the object and you know it has the method.
This is usually caused when using a build system like Apache Ant that only compiles java files when the java file is newer than the class file. If a method signature changes and classes were using the old version things may not be compiled correctly. The usual fix is to do a full rebuild (usually "ant clean" then "ant").
Sometimes this can also be caused when compiling against one version of a library but running against a different version.
I had the same error:
Exception in thread "main" java.lang.NoSuchMethodError: com.fasterxml.jackson.core.JsonGenerator.writeStartObject(Ljava/lang/Object;)V
at com.fasterxml.jackson.databind.ser.BeanSerializer.serialize(BeanSerializer.java:151)
at com.fasterxml.jackson.databind.ser.DefaultSerializerProvider.serializeValue(DefaultSerializerProvider.java:292)
at com.fasterxml.jackson.databind.ObjectMapper._configAndWriteValue(ObjectMapper.java:3681)
at com.fasterxml.jackson.databind.ObjectMapper.writeValueAsString(ObjectMapper.java:3057)
To solve it I checked, firstly, Module Dependency Diagram (click in your POM the combination -> Ctrl+Alt+Shift+U or right click in your POM -> Maven -> Show dependencies) to understand where exactly was the conflict between libraries (Intelij IDEA). In my particular case, I had different versions of Jackson dependencies.
1) So, I added directly in my POM of the project explicitly the highest version - 2.8.7 of these two.
In properties:
<jackson.version>2.8.7</jackson.version>
And as dependency:
<dependency>
<groupId>com.fasterxml.jackson.core</groupId>
<artifactId>jackson-databind</artifactId>
<version>${jackson.version}</version>
</dependency>
2) But also it can be solved using Dependency Exclusions.
By the same principle as below in example:
<dependency>
<groupId>group-a</groupId>
<artifactId>artifact-a</artifactId>
<version>1.0</version>
<exclusions>
<exclusion>
<groupId>com.fasterxml.jackson.core</groupId>
<artifactId>jackson-databind</artifactId>
</exclusion>
</exclusions>
</dependency>
Dependency with unwanted version will be excluded from your project.
This can also be the result of using reflection. If you have code that reflects on a class and extracts a method by name (eg: with Class.getDeclaredMethod("someMethodName", .....)) then any time that method name changes, such as during a refactor, you will need to remember to update the parameters to the reflection method to match the new method signature, or the getDeclaredMethod call will throw a NoSuchMethodException.
If this is the reason, then the stack trace should show the point that the reflection method is invoked, and you'll just need to update the parameters to match the actual method signature.
In my experience, this comes up occasionally when unit testing private methods/fields, and using a TestUtilities class to extract fields for test verification. (Generally with legacy code that wasn't designed with unit testing in mind.)
If you are writing a webapp, ensure that you don't have conflicting versions of a jar in your container's global library directory and also in your app. You may not necessarily know which jar is being used by the classloader.
e.g.
tomcat/common/lib
mywebapp/WEB-INF/lib
For me it happened because I changed argument type in function, from Object a, to String a. I could resolve it with clean and build again
In my case I had a multi module project and scenario was like com.xyz.TestClass was in module A and as well as in module B and module A was dependent on module B. So while creating a assembly jar I think only one version of class was retained if that doesn't have the invoked method then I was getting NoSuchMethodError runtime exception, but compilation was fine.
Related : https://reflectoring.io/nosuchmethod/
Why anybody doesn't mention dependency conflicts? This common problem can be related to included dependency jars with different versions.
Detailed explanation and solution: https://dzone.com/articles/solving-dependency-conflicts-in-maven
Short answer;
Add this maven dependency;
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-enforcer-plugin</artifactId>
<version>3.0.0-M3</version>
<configuration>
<rules>
<dependencyConvergence />
</rules>
</configuration>
</plugin>
Then run this command;
mvn enforcer:enforce
Maybe this is the cause your the issue you faced.
It means the respective method is not present in the class:
If you are using jar then decompile and check if the respective version of jar have proper class.
Check if you have compiled proper class from your source.
I have just solved this error by restarting my Eclipse and run the applcation.
The reason for my case may because I replace my source files without closing my project or Eclipse.
Which caused different version of classes I was using.
Try this way: remove all .class files under your project directories (and, of course, all subdirectories). Rebuild.
Sometimes mvn clean (if you are using maven) does not clean .class files manually created by javac. And those old files contain old signatures, leading to NoSuchMethodError.
Just adding to existing answers. I was facing this issue with tomcat in eclipse. I had changed one class and did following steps,
Cleaned and built the project in eclpise
mvn clean install
Restarted tomcat
Still I was facing same error. Then I cleaned tomcat, cleaned tomcat working directory and restarted server and my issue is gone. Hope this helps someone
These problems are caused by the use of the same object at the same two classes.
Objects used does not contain new method has been added that the new object class contains.
ex:
filenotnull=/DayMoreConfig.conf
16-07-2015 05:02:10:ussdgw-1: Open TCP/IP connection to SMSC: 10.149.96.66 at 2775
16-07-2015 05:02:10:ussdgw-1: Bind request: (bindreq: (pdu: 0 9 0 [1]) 900 900 GEN 52 (addrrang: 0 0 2000) )
Exception in thread "main" java.lang.NoSuchMethodError: gateway.smpp.PDUEventListener.<init>(Lgateway/smpp/USSDClient;)V
at gateway.smpp.USSDClient.bind(USSDClient.java:139)
at gateway.USSDGW.initSmppConnection(USSDGW.java:274)
at gateway.USSDGW.<init>(USSDGW.java:184)
at com.vinaphone.app.ttn.USSDDayMore.main(USSDDayMore.java:40)
-bash-3.00$
These problems are caused by the concomitant 02 similar class (1 in src, 1 in jar file here is gateway.jar)
To answer the original question. According to java docs here:
"NoSuchMethodError" Thrown if an application tries to call a specified method of a class (either static or instance), and that class no longer has a definition of that method.
Normally, this error is caught by the compiler; this error can only occur at run time if the definition of a class has incompatibly changed.
If it happens in the run time, check the class containing the method is in class path.
Check if you have added new version of JAR and the method is compatible.
I fixed this problem in Eclipse by renaming a Junit test file.
In my Eclipse work space I have an App project and a Test project.
The Test project has the App project as a required project on the build path.
Started getting the NoSuchMethodError.
Then I realized the class in the Test project had the same name as the class in the App project.
App/
src/
com.example/
Projection.java
Test/
src/
com.example/
Projection.java
After renaming the Test to the correct name "ProjectionTest.java" the exception went away.
NoSuchMethodError : I have spend couple of hours fixing this issue, finally fixed it by just renaming package name , clean and build ... Try clean build first if it doesn't works try renaming the class name or package name and clean build...it should be fixed. Good luck.
I ran into a similar problem when I was changing method signatures in my application.
Cleaning and rebuilding my project resolved the "NoSuchMethodError".
Above answer explains very well ..just to add one thing
If you are using using eclipse use ctrl+shift+T and enter package structure of class (e.g. : gateway.smpp.PDUEventListener ), you will find all jars/projects where it's present. Remove unnecessary jars from classpath or add above in class path. Now it will pick up correct one.
I ran into similar issue.
Caused by: java.lang.NoSuchMethodError: com.abc.Employee.getEmpId()I
Finally I identified the root cause was changing the data type of variable.
Employee.java --> Contains the variable (EmpId) whose Data Type has been changed from int to String.
ReportGeneration.java --> Retrieves the value using the getter, getEmpId().
We are supposed to rebundle the jar by including only the modified classes. As there was no change in ReportGeneration.java I was only including the Employee.class in Jar file. I had to include the ReportGeneration.class file in the jar to solve the issue.
I've had the same problem. This is also caused when there is an ambiguity in classes. My program was trying to invoke a method which was present in two JAR files present in the same location / class path. Delete one JAR file or execute your code such that only one JAR file is used. Check that you are not using same JAR or different versions of the same JAR that contain the same class.
DISP_E_EXCEPTION [step] [] [Z-JAVA-105 Java exception java.lang.NoSuchMethodError(com.example.yourmethod)]
Most of the times java.lang.NoSuchMethodError is caught be compiler but sometimes it can occur at runtime. If this error occurs at runtime then the only reason could be the change in the class structure that made it incompatible.
Best Explanation: https://www.journaldev.com/14538/java-lang-nosuchmethoderror
I've encountered this error too.
My problem was that I've changed a method's signature, something like
void invest(Currency money){...}
into
void invest(Euro money){...}
This method was invoked from a context similar to
public static void main(String args[]) {
Bank myBank = new Bank();
Euro capital = new Euro();
myBank.invest(capital);
}
The compiler was silent with regard to warnings/ errors, as capital is both Currency as well as Euro.
The problem appeared due to the fact that I only compiled the class in which the method was defined - Bank, but not the class from which the method is being called from, which contains the main() method.
This issue is not something you might encounter too often, as most frequently the project is rebuilt mannually or a Build action is triggered automatically, instead of just compiling the one modified class.
My usecase was that I generated a .jar file which was to be used as a hotfix, that did not contain the App.class as this was not modified. It made sense to me not to include it as I kept the initial argument's base class trough inheritance.
The thing is, when you compile a class, the resulting bytecode is kind of static, in other words, it's a hard-reference.
The original disassembled bytecode (generated with the javap tool) looks like this:
#7 = Methodref #2.#22 // Bank.invest:(LCurrency;)V
After the ClassLoader loads the new compiled Bank.class, it will not find such a method, it appears as if it was removed and not changed, thus the named error.
Hope this helps.
The problem in my case was having two versions of the same library in the build path. The older version of the library didn't have the function, and newer one did.
I had a similar problem with my Gradle Project using Intelij.
I solved it by deleting the .gradle (see screenshot below) Package and rebuilding the Project.
.gradle Package
I had faced the same issue. I changed the return type of one method and ran the test code of that one class. That is when I faced this NoSuchMethodError. As a solution, I ran the maven builds on the entire repository once, before running the test code again. The issue got resolved in the next single test run.
One such instance where this error occurs:
I happened to make a silly mistake of accessing private static member variables in a non static method. Changing the method to static solved the problem.
I have an eclipse plugin which has it's Java code structured in multiple projects. In one of the projects I added an external jar and used some classes from it. At compilation time no errors where reported, but at runtime, a NoClassDefFoundError exception was thrown. I fixed the problem following this solution.
After this I run a Project -> Clean.. and out of a sudden in a different project I have an error that The method filter(Predicate<? super String[]>) in the type FluentIterable<String[]> is not applicable for the arguments ....
I compared the FluentIterable clasess in both situations and their origin does not modify.
Why is this happening?
I was getting the error because the imported jar was using a different FluentIterable class from a guava jar. I thought the class origin is the same because when I switched back the build path, I did not execute a Project->Clean and eclipse was still pointing to the bad class location.
I'm using gwt-maven-plugin to manage a GWT project. I use the gwt:run goal all the time to run locally in "dev mode" for testing. I now want to compile my project into a war for deployment on Tomcat. When I run gwt:compile, however, I get compile errors that indicate a classpath configuration issue. An example:
Finding entry point classes
[ERROR] Errors in 'shared.MyClass.java'
[ERROR] Line 4: The import server.model.MyObject cannot be resolved
Any ideas? Do I need to manually add the server package to some config file somewhere? Thanks in advance for any info.
-tjw
Ok, I found the problem. I found this in the GWT forums by Thomas Broyer (a GWT dev):
I mean you have to "javac" classes that are referenced from
annotations (in this case, the PlaceTokenizer classes referenced from
#WithTokenizers; that'd be true also of your service, domain object,
locator or service locator with RequestFactory, unless you use
#ServiceName and #ProxyForName). Otherwise, GWT can work with only
the *.java files, without the *.class.
I am trying to load in these classes from annotations since they are used with RequestFactory. My question is now this: How is this restriction not completely insane?