We Keep Coding

JFrame that waits for User Input [duplicate]

In a JFrame, when I click on 'login', I pop up another Jframe which is the login window.
How do I make my main Jframe wait for my login Jframe to exit, before doing anything else?

Just use a modal dialog in stead of a frame, that way you cannot do anything else until it'is closed
see http://mindprod.com/jgloss/modal.html for explanation
and see http://www.java2s.com/Tutorial/Java/0240__Swing/ASimpleModalDialog.htm for code example
If you insist on using a JFrame, you could use a workaround by cover the other frame by a glassframe.. Not too a nice solution, I admit..

I agree that a modal dialog would be the best option here, but if I were to answer this question in it's more general form, say:
How do I make one JFrame wait for another JFrame?
I would say the easiest way to acheive this is by registering and firing event listeners.
In your "child" frame, register the "main" frame as an event listener.
In your "main" frame,
implement your choice of listener, e.g. ActionListener
in the method called by the listener, e.g. actionPerformed, code the logic that handles what happens upon each of the actions it can respond to in the "child" frame.
One can easily implement this to a ny number of situations, including the login scenario described in the question.

Use JModalFrame instead of JFrame.

Figure out when a button is pressed in another window

I run my main window in the main method like this:
SwingUtilities.invokeLater(new Runnable() {
#Override
public void run() {
NoteSystem MainWindow = new NoteSystem();
MainWindow.initUI();
}
});
And then when a button is pressed on this form, I create a window by instantiating a class I made. I'm having trouble detecting when the second form is closed and what the textboxes/other controls contained.
What is the proper way to:
a) Fire an event in NoteSystem when the second window is closed
b) allow NoteSystem to check all the components/controls in the second window
I considered using a JOptionPane, but I'd like to create the window entirely in my own class. The idea of having the main window frozen while waiting for response from the second window works for my application though, so if I could use JOptionPane with my own class, that would be ideal.
Thanks

The best way is to use a modal dialog, a window like a JFrame, but that halts program flow in the calling code until it is no longer visible. This way, the calling code will know exactly when the dialog window has been dealt with, since its code flow will resume once again, and so often the calling code will extract information from the dialog window code at that point. A JOptionPane is one type of these, and so is a modeal JDialog (of which a JOptionPane is a sub-type). Either of these can display as complex a GUI as any that is displayed within a JFrame, so don't sell them short. You'll notice that the second parameter of most JOptionPane methods is of type Object, meaning anything can go in there, but most often you'll pass in either a String for a simple JOptionPane, or a JPanel that can be chock full of components and other nested JPanels, and in this way the JOptionPane can display the complex GUI if need be.
For examples, please see:
Passing values between JFrames
action listener to JDialog for clicked button
trouble obtaining variable info from another JFrame
How do you return a value from a java swing window closes from a button?

Java with many Forms

If I am going about this all wrong please let me know.
What I have:
JFrame
JDialog
Main executable
What I want to do
Have a way to open the JDialog (the class extends the JDialog) and have the JFrame pause and wait for the JDialog to be closed before doing anything else. The JDialog is actually just hidden so I can then call a method to pull the data that the user input.
My Issues
Cant figure out how to make the JFrame wait until the JDialog is closed before executing more code
If possible I would like the JFrame to be disabled until the JDialog is closed.

What you're describing is nothing more than using a modal JDialog. When you construct the dialog, when you call its constructor, be sure to set its modality type to ModalityType.APPLICATION_MODAL.
e.g.,
JDialog myDialog = new JDialog(myJFrame, "Dialog",
Dialog.ModalityType.APPLICATION_MODAL);
Please read: How to Use Modality in Dialogs

Exiting out of one of two JFrame exits out of both

I have two seperate JFrames but when i click the X in the topright of one, it will exit out of the other also. I have an "exit" button near the bottom to do setVisible(false), but i still have the tendency to use the x button. How would i make it so that it doesnt cancel out of the entire project?
Also, how would i make it so that the second JFrame locks out of the other JFrame untill the second JFrame is closed, like how a popup message works

Don't give your GUI two JFrames. The GUI ideally should have only one GUI. If a separate window is required, then make it a dialog such as a JDialog, and this won't happen.
Also, how would i make it so that the second JFrame locks out of the other JFrame untill the second JFrame is closed, like how a popup message works
You are perfectly describing the behavior of a modal JDialog or JOptionPane. Just use 'em.
Later we'll chat about using CardLayouts to swap views in a single GUI.
Edit, you state:
Im using Netbeans form editor to create them faster but I only see JFrame and JPanel. Can I edit them in Netbeans? I'd rather not do them through scratch Java
You've touched on another zealous belief of mine, that this is yet another reason not to use a code generator when learning a library as one can get too tied into the code generator, that it prevents one from learning the library. I strongly advise you to put aside your code-generation tool and create by hand, referring to the tutorials and API. Then later when you get more familiar with the library, sure use the tool. By the way, an answer to your direct question here is to gear your GUI's to create JPanels, and then use these JPanels where and how you want them -- in JFrames, or JDialogs, or JOptionPanes, or swapped in CardLayouts, or JTabbedPanes or nested in other JPanels,... etc...

You should be using a modal JDialog, not a second JFrame, because JDialogs provide certain functionality such as not adding another window bar to the taskbar, and automatically setting focus when the parent JFrame receives focus. Modal JDialogs prevent user input to the JFrame while it's open, useful for an "Are you sure you want to exit?" dialog, for example.
As for one JFrame exiting the other, you probably have their default close operation set to EXIT_ON_CLOSE. If you do this:
jframe.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
jframe.addWindowListener(new WindowAdapter(){
public void windowClosing(WindowEvent we){
handleUserWantsToCloseWindow();
}
});
Then you can control what happens when the user wants to close, such as popping up a "Save Changes?" modal JDialog or "Are you sure you want to quit?" modal JDialog. Note that you have to manually dispose of the JFrame if you use this method.

Java swing. How to wait for other Jframes

In a JFrame, when I click on 'login', I pop up another Jframe which is the login window.
How do I make my main Jframe wait for my login Jframe to exit, before doing anything else?

Just use a modal dialog in stead of a frame, that way you cannot do anything else until it'is closed
see http://mindprod.com/jgloss/modal.html for explanation
and see http://www.java2s.com/Tutorial/Java/0240__Swing/ASimpleModalDialog.htm for code example
If you insist on using a JFrame, you could use a workaround by cover the other frame by a glassframe.. Not too a nice solution, I admit..

I agree that a modal dialog would be the best option here, but if I were to answer this question in it's more general form, say:
How do I make one JFrame wait for another JFrame?
I would say the easiest way to acheive this is by registering and firing event listeners.
In your "child" frame, register the "main" frame as an event listener.
In your "main" frame,
implement your choice of listener, e.g. ActionListener
in the method called by the listener, e.g. actionPerformed, code the logic that handles what happens upon each of the actions it can respond to in the "child" frame.
One can easily implement this to a ny number of situations, including the login scenario described in the question.

Use JModalFrame instead of JFrame.