I have an error in my first step with Java, so when i try to run the code hello world:
class apples{
public static void main(String args[]){
System.out.println("Hello World!");
}
}
I go to: - Run as .. -> Then i choose Java aplicacion - > And i press Ok
But when i press Ok does not appear the window down to show me the correct message Hello World
Your code works fine for me:
class apples
{
public static void main(String args[])
{
System.out.println("Hello World!");
}
}
I downloaded it to c:\temp\apples.java.
Here's how I compiled and ran it:
C:\temp>javac -cp . apples.java
C:\temp>dir apples
Volume in drive C is HP_PAVILION
Volume Serial Number is 0200-EE0C
Directory of C:\temp
C:\temp>dir ap*
Volume in drive C is HP_PAVILION
Volume Serial Number is 0200-EE0C
Directory of C:\temp
08/15/2010 09:15 PM 418 apples.class
08/15/2010 09:15 PM 123 apples.java
2 File(s) 541 bytes
0 Dir(s) 107,868,696,576 bytes free
C:\temp>java -cp . apples
Hello World!
C:\temp>
Your lack of understanding and the IDE appear to be impeding your progress. Do simple things without the IDE for a while until you get the hang of it. A command shell and a text editor will be sufficient.
Sorry about missing javac; cut & paste error.
If you look at the screenshot, your class name is there, last in the list. Select it and press OK. To not see this message again, right-click on the class name on the left side and select there Run...->Java Application.
The only problem that causes your error here is that the classname and the filename do not match - and they have to.
Solution
Rename either the file thesame.java to apple.java or the class to thesame. Then if you select "Run as..." again, eclipse will present a menu item to start your Java application.
(other mentioned, that there's no requirement that a top-level class and the filename do match - unless the top level class is public. Of course this is true. But the problem was about "running" a class under eclipse as a Java application)
Try public class apples and make sure the file is apples.java. Also it should be public static void main(String[] args)
You have 2 classes by name of "thesame.java" under the source folder. Since one is directly under the src folder, and other under (default package), they use the same namespace, hence Interpreter is confused which java file to execute and is asking you to select the class you want to execute.
Class names must be capitalized... so change apples to Apples. Also, if you are a beginner (which it seems like), I would recommend the Netbeans IDE -- it's a bit more friendlier for new users than Eclipse.
You class must be named "thesame" if you store it in a file called "thesame.java", as you have. Either rename your class to "thesame" or change the file to be "apples.java".
You should move the "[]" to be before "args". So, String[] args.
Either select "apples" at the bottom of the menu you posted and run it, or right-click on the Java file and make it the default thing to run for this project. Or launch it by right-clicking on the file and selecting "run".
Related
I'm on latest Windows 10. I have JDK 15. Latest Visual Studio Code (System). In VS Code, I have half of the Java Extension Pack Installed, i.e Language Support for Java (Red Hat) | Debugger for Java (Microsoft) | Visual Studio IntelliCode (Microsoft). So I did that to just get that run button on the top right (the default installed VS Code didn't have that run button for JAVA programs), below the close button, to that I can run the JAVA programs inside the VS Code. I didn't wanna go out to the directory then open Power Shell or CMD and then write java filename.java and run the program...
Now the issue is that when I click the run button, I think, a Power Shell is opened inside the VS Code and then something other than "java FileName.java" is being written. Because of that I can't really see what the compilation error is. I can only see the line number where the problem is, not actually the solution for that. || If I run the same in the PowerShell outside the VS Code with this "java FileName.java", I can see that there is some issue at x line and also the solution for the same.
So I wanted to know if there is any way to get this type of output inside the Visual Studio Code.
Or if there is any way that Instead of writing a lot of thing like this, we can simple tell the Visual Studio Code to run "java fileName.java" inside VS Code when I click the Run Button at the top.
EDIT:
The Code that I'm running is this one.....
File Name - test.java
import java.io.*;
public class SOPFileTest{
public static void main(String arr[]){
try{
// Creating a File object that represents the disk file.
PrintStream o = new PrintStream(new File("A.txt"));
// Store current System.out before assigning a new value
PrintStream console = System.out;
// Assign o to output stream
System.setOut(o);
System.out.println("Test 1");
// Use stored value for output stream
System.setOut(console);
System.out.println("Test 2");
}
catch(Exception e){
System.out.println(e.getMessage());
}
}
Now I've noticed somethings, they are:
-When (FileName == Class Name)
---Then (VS Code)
-----Prints the Last System.out.println in the console
-----A.txt is not created / written inside
---Then (Powershell)
-----Prints the Last System.out.println in the console
-----A.txt is created and/or written inside
-When (FileName != Class Name)
---Then (VS Code)
-----shows the error same as the image that I included above.
---Then (Powershell)
-----Prints the Last System.out.println in the console
-----A.txt is created and/or written inside
So powershell works as I intend it would, the VS Code isn't...
If the filename is different from ClassName, java extension will detect it and throws probelms, which is build failed and you can choose if continue:
If you choose proceed, there should be:
[UPDATE -- Screenshot in Powershell:]
It's about the same as problems shown in VS Code.
Java extension requires class must be defined in its own file, so filename should be as the same as ClassName, then everything works well, no matter in integrated Terminal in VS Code, or in the PowerShell outside VS Code:
So I wanted to know if there is any way to get this type of output
inside the Visual Studio Code.
Keeping the filename and classname same makes sure it could be built and compiled successfully, which is the first step.
And the text file should be generated in current working directory, check it in your file explorer.
Eclipse give error when I try to compile and run to JAVA codes. The error is
"The selection cannot be launched, and there are no recent launches".
How to fix this issue ??
your code is wrong. you need a main method to launch your program
package main;
public class main {
public static void main (String[] args) {
System.out.println("Test");
}
}
Note: The name of the class always has to be the name of the file, and typically java classes start with an uppercase letter
I think you should run main first and describe your problem in more detail if you still have a problem.
Q: When I try to run my project by clicking the green "Play" button, I get an error of, "The Selection cannot be launched, and there are no recent launches."
A: See previous question. You must run your project's "Main" class at least once by using the right-click method described above, before the "Play button" to run a project will work.
http://courses.cs.washington.edu/courses/cse143/15wi/eclipse_tutorial/faq.shtml
My DrJava was working fine, but now I keep getting the folowing error whenever I run anything:
Static Error: This class does not have a static void main method accepting String[].
So it will compile OK, but then it shoots out the error . This happens even though everything I test does indeed have a public static void main(String[] args) in it. It seems like a classpath/resources type of error. I appreciate any tips
EDIT: my class
public class Test{
public static void main(String[] args){
System.out.println(" hashmap ");
}
}
There's nothing wrong with the code, so the problem must be with the environment.
Check that you're actually executing that class. Find out where the class that's executed is specified and check it's correct
Check that you're compiling the class. Maybe the code you're looking at has not been compiled and you're trying to execute an old version that was compild before you coded a main()
Check your classpath. Is the compiled class accessible in the classpath of the java command
You don't need to reinstall java, nor is it a java version issue. It may be the way that your are running the program.
To check if it is a problem with your code, do the following:
Make a new folder and put Test.java in it.
Open up Command Line Or Terminal and change to that folder .
Type javac Test.java. Test.class should be in the folder now.
If you want, open up the class with a text editor. This is what I get:
˛∫æ2
<init>()VCodeLineNumberTablemain([Ljava/lang/String;)V
SourceFile Test.java hashmap Testjava/lang/Objectjava/lang/SystemoutLjava/io/PrintStream;java/io/PrintStreamprintln(Ljava/l ang/String;)V! *∑±
% ≤∂±
Back to the command line or terminal, type java Test.
If you get an error, which you shouldn't, I don't know what to say. It should produce the string " hashmap " on to the command line or terminal.
Why re-installing Dr. Java may not work is because you may be using the same working directory, causing same run settings to be used. Dr. Java may be running an external program, one without a main method.
I think that you should install the Eclipse IDE for Java. It is much easier to get around, it looks nicer, and it runs the file or project that you are looking at currently.
Sometimes this problem happens because may be mistake in saving file.you always your file using double quotes and with the .java extension which is main class means that class containing main method.
you should save your file by class name which is public .if there is two classes and both have main method then you should save your file by class name that is public and that class will be run.As like your compiler looking for main method in public static void main(String [] args) that is contract for jvm to run a programme
so it is not able to found that main method that is static and it looking for your Dr class.java
See this Example it have two main methods and practice these kinds of question.I also got this kind of problem in starting.
public class TestFirst
{
public static void main(String [] args){
System.out.println(" TestFirst ");
}
}
class Test{
public static void main(String [] args){
System.out.println(" hashmap ");
}
}
if you save pro-gramme by "TestFirst.java" then o/p will come TestFirst if you do some mistake in main method because we have saved our programme by TestFirst then you will get error like you got.
# 2nd mistake may be this
debian#debian:~/Geany_java$ javac Test1.java
debian#debian:~/Geany_java$ java Test1
Exception in thread "main" java.util.NoSuchElementException
at java.util.StringTokenizer.nextToken(StringTokenizer.java:349)
at Test1.main(Test1.java:11)
your classpath has not set properly See above Compiling successfully but running showing same kind of error you got.Which OS is using I can guide you properly.
Check that actually your file have the .java termination nor the .dj
There is nothing wrong with the code.
It is the executing environment which might have problem. Please share the details.
Check if program compiled correctly.
Check time-stamo of .class file.
Check permissions on folder/directory where class-files are getting generated.
Check if DrJAVA has appropriate permission on the directory.
Did you create a file, compiled it with out main?
Check class-path. Might be possible that previous class file is still being found by JDK in classpath.
Try compiling .java file from cmdLine instead of editor.
As others have mentioned, your code is fine. There must be a problem with your environment. I recently experienced a similar issue when investigating and answering this question.
Basically, in that question, the code Void.class instanceof Class resulted in a compiler error because a user-made Class.class existed in the classpath, so one Class (the Java built-in java.lang.Class) didn't match with the given Class (user-made).
Something similar may be at work here. It is possible that there is a user-made String.class in your classpath. Then in your main signature, String[] args would mean an array of your String, when Dr. Java must be looking for a main method taking an array of the Java built-in String, i.e. java.lang.String[]. If you have a custom String class in your classpath (or in your project?), then the Java compiler will choose it over the built-in String. If you were to compile and run your Test class from the command line, then you would get the runtime error: Exception in thread "main" java.lang.NoSuchMethodError: main.
Following #S0urceC0ded's suggestion, you may find this when looking at Test.class in a text editor:
main([LString;)V // A user-made String class
instead of what it's supposed to be:
main([Ljava/lang/String;)V // The built-in java.lang.String class
If so, remove your own String class (at least the .class file, but also the .java file so the .class file isn't re-created) from the classpath, and compile and run your Test class again.
Without a look at your environment, I can't tell for sure that this is the issue. But it can explain it.
If you are using Dr.Java as IDE, then you need to make sure that the main class containing 'public static void main' should be at the very top of your program. Otherwise Dr.Java throws this error during runtime.
I am new to java and to the eclipse IDE.
I am running Eclipse
Eclipse SDK
Version: 3.7.1
Build id: M20110909-1335
On a windows Vista machine.
I am trying to learn from the book Thinking in Java vol4.
The author uses his own packages to reduce typing. However the author did not use Eclipse and this is where the problem commes in..
This is an example of the code in the book.
import java.util.*;
import static net.mindview.util.print.*;
public class HelloWorld {
public static void main(String[] args) {
System.out.println("hello world");
print("this does not work");
}
this is the contents of print.Java
//: net/mindview/util/Print.java
// Print methods that can be used without
// qualifiers, using Java SE5 static imports:
package net.mindview.util;
import java.io.*;
public class Print {
// Print with a newline:
public static void print(Object obj) {
System.out.println(obj);
}
// Print a newline by itself:
public static void print() {
System.out.println();
}
// Print with no line break:
public static void printnb(Object obj) {
System.out.print(obj);
}
// The new Java SE5 printf() (from C):
public static PrintStream
printf(String format, Object... args) {
return System.out.printf(format, args);
}
} ///:~
The error I get the most is in the statement.
Import static net.mindview.util.print.*;
On this staement the Eclipse IDE says it cannot resolve net
also on the
print("this does not work");
The Eclipse IDE says that the class print() does not exist for the class HelloWorld.
I have been trying to get these to work, but with only limited success, The autor uses another 32 of these packages through the rest of the book.
I have tried to add the directory to the classpath, but that seems to only work if you are using the JDK compiler. I have tried to add them as libraries and i have tried importing them into a package in a source file in the project. I have tried a few other things but cant remember them all now.
I have been able to make one of the files work, the print.java file I gave the listing for in this message. I did that by creating a new source folder then making a new package in that foldeer then importing the print.java file into the package.
But the next time I try the same thing it does not work for me.
What I need is a way to have eclipse load all these .java files at start up so when I need them for the exercises in the book they will be there and work for me, or just an easy way to make them work everytime.
I know I am not the only one that has had this problem I have seen other questions about it on google searches and they were also asking about the Thinking In Java book.
I have searched this site and others and am just not having any luck.
Any help with this or sugestions are welcome and very appreciated.
thank you
Ok I have tried to get this working as you said, I have started a new project and I removed the static from the import statement, I then created a new source folder, then I created a new package in the source folder. Then I imported the file system and selected the the net.mindview.util folder.
Now the immport statement no longer gives me an error. But the the print statement does, the only way to make the print statement work is to use its fully qualified name. Here is the code.
import net.mindview.util.*;
public class Hello2 {
public static void main(String[] args) {
Hello2 test = new Hello2();
System.out.println();
print("this dooes not work");
net.mindview.util.Print.print("this stinks");
}
}
The Error on the print statement is:
The method print(String) is undefined for the type Hello2
and if I try to run it the error I get is:
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
The method print(String) is undefined for the type Hello2
at Hello2.main(Hello2.java:6)
The Statement::::: net.mindview.util.Print.print("this stinks") is the fully qualified print statement and it does not throw an error but it does totally defeat the purpose of the print.java file..
If you have any questions please ask Ill get back to you as soon as I can.
I've had similar issues. I solved it by following the steps below:
Click File->New->Java Project. Fill in UtilBuild for the ProjectName. Chose the option "Use project folder as root and click 'Finish'.
Right-click on UtilBuild in the PackageExplorer window and click New->package. For the Package Name, fill in net.mindview.util
Navigate within the unzipped Thinking In Java (TIJ) folder to TIJ->net\mindview\util. Here you will find all the source code (.java) files for util.
Select all the files in the net\mindview\util folder and drag them to the net.mindview.util package under UtilBuild in Eclipse. Chose the 'Copy Files' option and hit 'OK'.
You will probably already have the 'Build Automatically' option checked. If not, go to Project and click 'Build Automatically'. This will create the .class files from the .java source files.
In Eclipse, right-click on the project you were working on (the one where you couldn't get that blasted print() method to work!) Click Properties and Java Build Path->Libraries. Click 'Add Class Folder...' check the box for UtilBuild (the default location for the .class files).
I think the confusion here arises due to CLASSPATH. If you use Eclipse to build and run your code then Eclipse manages your CLASSPATH. (You don't have to manually edit CLASSPATH in the 'Environment Variables' part of your computer properties, and doing so changes nothing as far as Eclipse Build and Run are concerned.)
In order to call code that exists outside your current project (I will name this 'outside code' for convenience) you need to satisfy three things:
A. You need to have the .class files for that code (as .class files or inside a JAR)
B. You need to indicate in your source code where to look for the 'outside code'
C. You need to indicate where to start looking for the 'outside code'
In order to satisfy these requirements, in this example we:
A. Build the project UtilBuild which creates the .class files we need.
B. Add the statement import static net.mindview.util.Print.*; in our code
C. Add the Class Folder library in Eclipse (Java Build Path->Libraries).
You can investigate the effect of Step C by examining the .classpath file that lives directly in your project folder. If you open it in notepad you will see a line similar to the following:
<classpathentry kind="lib" path="/UtilBuild>
You should combine this with your import statement to understand where the compiler will look for the .class file. Combining path="/UtilBuild" and import static net.mindview.util.Print.*; tells us that the compiler will look for the class file in:
UtilBuild/net/mindview/util
and that it will take every class that we built from the Print.java file (Print.*).
NOTE:
There is no problem with the keyword static in the statement
import static net.mindview.util.Print.*;
static here just means that you don't have to give specify the class name from Print.java, just the methods that you want to call. If we omit the keyword static from the import statement, then we would need to qualify that print() method with the class it belongs to:
import net.mindview.util.Print.*;
//...
Print.print("Hello");
which is slightly more verbose than what is achieved with the static import.
OPINION:
I think most people new to Java will use Eclipse at least initially. The Thinking in Java book seems to assume you will do things via command line (hence it's guidance to edit environment variables in order to update CLASSPATH). This combined with using the util folder code from very early in the book I think is a source of confusion to new learners of the language. I would love to see all the source code organised into an Eclipse project and available for download. Short of that, it would be a nice touch to include the .class files in just the 'net/mindview/util' folder so that things would be a little easier.
U should import package static net.mindview.util not static net.mindview.util.Print
and you should extend the class Print to use its method.......
You should remove the static keyword from your import decleration, this: import static net.mindview.util.print.*; becomes this: import net.mindview.util.print.*;
If that also does not work, I am assuming you did the following:
Create your own project;
Start copying code directly from the book.
The problem seems to be that this: package net.mindview.util; must match your folder structure in your src folder. So, if your src folder you create a new package and name it net.mindview.util and in it you place your Print class, you should be able to get it working.
For future reference, you should always make sure that your package decleration, which is at the top of your Java class, matches the package in which it resides.
EDIT:
I have seen your edit, and the problem seems to have a simple solution. You declare a static method named print(). In java, static methods are accessed through the use of ClassName.methodName(). This: print("this dooes not work"); will not work because you do not have a method named print which takes a string argument in your Hello2 class. In java, when you write something of the sort methodName(arg1...), the JVM will look for methods with that signature (method name + parameters) in the class in which you are making the call and any other classes that your calling class might extend.
However, as you correctly noted, this will work net.mindview.util.Print.print("this stinks");. This is because you are accessing the static method in the proper way, meaning ClassName.methodName();.
So in short, to solve your problem, you need to either:
Create a method named print which takes a string argument in your Hello2 class;
Call your print method like so: Print.print("this stinks");
Either of these two solutions should work for you.
In my case I've dowloaded and decompressed the file TIJ4Example-master.zip. in eclipse workspace folder. The three packages : net.mindview.atunit, net.mindview.simple and net.mindview.util are in this point of the project :
and java programs runs with no problems (on the right an example of /TIJ4Example/src/exercises/E07_CoinFlipping.java)
This is my first post on the forum, hope all of you guys are well.
I've got a issue using JiST/SWANS, the ad hoc simulator in java within eclipse.
I managed to load the API, (as an external JAR ofcourse) but Im basically having a problem integrating the runtime of JiST within eclipse.
After running the hello world im usually getting a stackoverflowerror exception, since it may need modifications within the runtime.
import jist.runtime.JistAPI;
public class hello implements JistAPI.Entity {
/**
* #param args
*/
public static void main(String[] args) {
System.out.println("simulation start");
hello t = new hello();
t.myEvent();
}
public void myEvent()
{
JistAPI.sleep(1);
myEvent();
System.out.println("hello world, t=" + JistAPI.getTime());
}
}
the website is: http://jist.ece.cornell.edu/index.html
Thank you in advance!
Actually you need to run Main.java within jist.runtime. But before rigth click Main.java, properties, Run/Debug settings, New,Arguments and type your class name (plain name no .java needed) in Progam arguments. This will tell the jist interface to translate your code using the rewriter and run it.
Examples:
To run hello.java type "hello"
To run aodvsim.java type: "jist.swans.Main driver.aodvsim"
If there are arguments needed type them after the clas name like: "jist.swans.Main driver.aodvsim -n 25 -f 2000x2000 -a grid:5x5 -t 10,600,60"
Wilmer Arellano
How well does SWANS work? Given that the documentation and code date back to 2005, I am not sure if this is the best platform to use.