This is a really simple request, but I am not quite sure the easiest/most efficient way of generating these two values.
I need to write a script that will check whether a given value is between two values. I am well aware of how this is done in SQL.
The way I need the values is somethign similar to the following.
Date testValue = new Date() //This represents the value we are testing
Date beginningOfDay = .... //This value would represent the date for
testValue at 12:00am
Date endOfDay = ... //This value would represent the date for
testValue at 11:59:59pm
Again, the Java Date() type may not be the best practice to do something like this. In the end I just need to generate three values that I can say
if testValue is after beginningOfDay && testValue is before endOfDay
//do logic
Personally I use the Calendar object for this. For example:
Date testDate = ??? //Replace with whatever source you are using
Calendar testDateCalendar = Calendar.getInstance();
testDateCalendar.setTime(testDate);
Date today = new Date();
Calendar endOfDay = Calendar.getInstance(); //Initiates to current time
endOfDay.setTime(today);
endOfDay.set(Calendar.HOUR_OF_DAY, 23);
endOfDay.set(Calendar.MINUTE, 59);
endOfDay.set(Calendar.SECOND, 59);
Calendar startOfDay = Calendar.getInstance();
startOfDay.setTime(today);
startOfDay.set(Calendar.HOUR_OF_DAY, 0);
startOfDay.set(Calendar.MINUTE, 0);
startOfDay.set(Calendar.SECOND, 0);
if (startOfDay.before(testDateCalendar) && endOfDay.after(testDateCalendar))
{
//Whatever
} else {
//Failure
}
You can use a calendar object to do this and by the way, the way you did the bounds check in your question is wrong (your date can match the before/after dates and still be considered in range). The following shows whether a date falls on a certain day of the year. It assumes that the timezones for the dateTime to check and the day are equal and that no time adjustments took place:
Date dateTime=...
Date day=...
// This is the date we're going to do a range check on
Calendar calDateTime=Calendar.getInstance();
calDateTime.setTime(dateTime);
// This is the day from which we will get the month/day/year to which
// we will compare it
Calendar calDay=Calendar.getInstance();
calDay.setTime(day);
// Calculate the start of day time
Calendar beginningOfDay=Calendar.getInstance();
beginningOfDay.set(calDay.Get(Calendar.YEAR),
calDay.Get(Calendar.MONTH),
calDay.Get(Calendar.DAY_OF_MONTH),
0, // hours
0, // minutes
0); // seconds
// Calculate the end of day time
Calendar endOfDay=Calendar.getInstance();
endOfDay.set(calDay.Get(Calendar.YEAR),
calDay.Get(Calendar.MONTH),
calDay.Get(Calendar.DAY_OF_MONTH),
23, // hours
59, // minutes
59); // seconds
// Now, to test your date.
// Note: You forgot about the possibility of your test date matching either
// the beginning of the day or the end of the day. The accepted answer
// got this range check wrong, as well.
if ((beginningOfDay.before(calDateTime) && endOfDay.after(calDateTime)) ||
beginningOfDay.equals(calDateTime) || endOfDay.equals(calDateTime))
{
// Date is in range...
}
This can be further simplified to:
Date dateTime=...
Date day=...
// This is the date we're going to do a range check on
Calendar calDateTime=Calendar.getInstance();
calDateTime.setTime(dateTime);
// This is the day from which we will get the month/day/year to which
// we will compare it
Calendar calDay=Calendar.getInstance();
calDay.setTime(day);
if (calDateTime.get(YEAR)==calDay.get(YEAR) &&
calDateTime.get(MONTH)==calDay.get(MONTH) &&
calDateTime.get(DAY_OF_YEAR)==calDay.get(DAY_OF_YEAR))
{
// Date is in range
}
Here's something I've used in my own code to determine if a file was modified on a certain day. Like the other answers in this thread, I used the Calendar.
// Get modified date of the current file
// and today's date
Calendar today = Calendar.getInstance();
Calendar modDate = Calendar.getInstance();
Date date = new Date(file.lastModified());
modDate.setTime(date);
// Convert dates to integers
int modDay = modDate.get(Calendar.DAY_OF_YEAR);
int todayDay = today.get(Calendar.DAY_OF_YEAR);
if (modDay == todayDay) {
// Do stuff
}
This might be closer to what you are looking for since you only need to see if the event falls on a certain day.
Related
This question already has answers here:
Get yesterday's date using Date [duplicate]
(8 answers)
Closed 8 years ago.
I've got an object with a field timestamp with type java.sql.Timestamp;.
And I need to get objects with yesterday date from a collection.
How to get them?
I mean I need something like this
for(int i = 0; i < items.size(); i++) {
(if the items.get(i).date == yesterday_date)
(get object)
}
You can get yesterday's Date by following approach Answered by Jiger Joshi.
And by using new Timestamp(java.util.Date) you can get yesterday's timestamp, you should use Timestamp#equals to equaling two different timestamp.
if (items.get(i).date.equals(getYesterdaytimestamp())){
...
}
And there are something which you must consider while implementing this. Calender#getTime which returns Date object and date object contains date with time, so in that case your equaling date or timestamp must be exactly equals with yesterday's date and time.
If requirement is, it needs to equal just yesterday no not where time is not considerable fact. In that case you need to equals two timestamp after discarding time part.
if (equalsWithYesterday(items.get(i).date)){
...
}
...
public boolean equalsWithYesterday(Timestamp st){
DateFormat dateFormat = new SimpleDateFormat("yyyy/MM/dd"); // Time part has discarded
Calendar cal = Calendar.getInstance();
cal.add(Calendar.DATE, -1);
Date yesterday = dateFormat.parse(dateFormat.format(cal.getTime())); // get yesterday's Date without time part
Date srcDate = new Date(st);
Date srcDateWithoutTime =dateFormat.parse(dateFormat.format(srcDate));
return yesterday.equals(srcDateWithoutTime ); // checks src date equals yesterday.
}
You can convert the timestamp object to date object like this:
Date date = new Date(items.get(i).getTime());
or you can simply use method Timestamp#compareTo(Date o)
items.get(i).compareTo(yesterday_date);
I hope you are not interested to compare the time?
Simply use Calendar class to extract the day, month, year etc. from the date and simply compare it.
Use Calendar#get() method to get the specific field from the date object.
How to subtract one day from the current date?
// get Calendar with current date
Calendar cal = Calendar.getInstance();
// get yesterday's date
cal.add(Calendar.DATE, -1);
// get components of yesterday's date
int month = cal.get(Calendar.MONTH) + 1; // 0 for January, 1 for Feb and so on
int day = cal.get(Calendar.DATE);
int year = cal.get(Calendar.YEAR);
// get yesterday's date in milliseconds
long lMillis = cal.getTime().getTime();
This question already has answers here:
How can I determine if a date is between two dates in Java? [duplicate]
(11 answers)
Closed 9 years ago.
I'm trying to write a schedule program in Java and I need to figure out what time it is, and whether the current time is in between two set times. Figuring out the current time is pretty simple, but do you have any suggestions for figuring out whether it is between two times of day. For example, it is 9:33 AM on a Thursday. So I would need to figure out which scheduled section of the week that time corresponds to. How would I go about comparing the time to set periods during the week, for example an Array of sectioned times during a week such as {Monday from 9-10 AM, Tuesday from 3-4 PM, Thursday from 8-11 AM}, and seeing which section of time the current time falls between?
An efficient way to find which period any date lies within would be to have a class;
public class TimePeriod implements Comparable<TimePeriod>{
Date start;
Date end;
//Constructor, getters, setters
boolean isIn(Date date) {
return date.after(start) && date.before(end);
}
public int compareTo(TimePeriod other) {
return start.compareTo(other.start);
}
}
..and then create a sorted list of TimePeriod where you can perform a binary search.
edit:
This might make the binary search easier;
int check(Date date) {
if (isIn(date)) {
return 0;
} else if (start.after(date)) {
return -1;
} else if (end.before(date)) {
return 1;
} else {
throw new IllegalStateException("Time has gone badly wrong");
}
}
If you're using Date Class, you could do it like this
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy hh:mm");
Date before = sdf.parse("07/05/2012 08:00");
Date after = sdf.parse("07/05/2012 08:30");
Date toCheck = sdf.parse("07/05/2012 08:15");
//is toCheck between the two?
boolean isAvailable = (before.getTime() < toCheck.getTime()) && after.getTime() > toCheck.getTime();
EDITED
As suggested by Jonathan Drapeau you could also use compareTo.
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy hh:mm");
Date before = sdf.parse("07/05/2012 08:00");
Date after = sdf.parse("07/05/2012 08:30");
Date toCheck = sdf.parse("07/05/2012 08:15");
//is toCheck between the two?
if you want to include the "initial" and "final" date range
boolean isAvailable = before.compareTo(toCheck) >= 0 && after.compareTo(toCheck) <= 0
if you want to exclude the "initial" and "final" date range
boolean isAvailable = before.compareTo(toCheck) > 0 && after.compareTo(toCheck) < 0
You could use it too on Calendar class.
Anyway, i highly recommend you to use Calendar. It's a way precise class
you could check it like this:
Calendar cal1 = Calendar.getInstance(); // for example 12:00:00
Calendar cal2 = Calendar.getInstance(); // for exmaple 12:30:00
Calendar userTime = Calendar.getInstance(); // time to test: 12:15:00
if(user.after(cal1)&& user.before(cal2)){
//...
}
And to initialize and set times to Calendar, check this:
http://www.tutorialspoint.com/java/util/calendar_settime.htm
I would suggest using the Epoch time.
For a definition of Epoch time: http://en.wikipedia.org/wiki/Epoch_time
Basically, its a number of seconds after a specific date, i believe in 1989. If you translate the 3 times (the current time and the 2 times to compare to) in epoch time you can just use > < = etc.
For information on getting epoch time, Try here (has many languages): http://shafiqissani.wordpress.com/2010/09/30/how-to-get-the-current-epoch-time-unix-timestamp/
Unfortunately, my java is lacking or I'd give you some code :)
Edit:
Java epoch time code:
long epoch = System.currentTimeMillis()/1000;
Because my Java is bad and I don't have an interpreter where I am, I can only suggest using this site to help convert the other dates to epoch time: http://www.epochconverter.com/
There is before(Date) and after(Date) method in Date Class.
secondDate.before(firstDate)
If you use Calendar class, it has explicit before() and after() methods:
Calendar startDate = ...
Calendar endData = ...
isBetween = currentDate.after(startDate) && currentDate.before(endDate);
The date is selected by the user using a drop down for year, month and day. I have to compare the user entered date with today's date. Basically see if they are the same date. For example
the user entered 02/16/2012. And if today is 02/16/2012 then I have to display a message. How do I do it?
I tried using milliseconds but that gives out wrong results.
And what kind of object are you getting back? String, Calendar, Date? You can get that string and compare it, at least that you think you'll have problems with order YYYY MM DD /// DD MM YYY in that case I suggest to create a custom string based on your spec YYYYMMDD and then compare them.
Date d1 = new Date();
Date d2 = new Date();
String day1 = d1.getYear()+"/"+d1.getMonth()+"/"+d1.getDate();
String day2 = d2.getYear()+"/"+d2.getMonth()+"/"+d2.getDate();
if(day1.equals(day2)){
System.out.println("Same day");
}
Dates in java are moments in time, with a resolution of "to the millisecond". To compare two dates effectively, you need to first set both dates to the "same time" in hours, minutes, seconds, and milliseconds. All of the "setTime" methods in a java.util.Date are depricated, because they don't function correctly for the internationalization and localization concerns.
To "fix" this, a new class was introduced GregorianCalendar
GregorianCalendar cal1 = new GregorianCalendar(2012, 11, 17);
GregorianCalendar cal2 = new GregorianCalendar(2012, 11, 17);
return cal1.equals(cal2); // will return true
The reason that GregorianCalendar works is related to the hours, minutes, seconds, and milliseconds being initialized to zero in the year, month, day constructor. You can attempt to approximate such with java.util.Date by using deprecated methods like setHours(0); however, eventually this will fail due to a lack of setMillis(0). This means that to use the Date format, you need to grab the milliseconds and perform some integer math to set the milliseconds to zero.
date1.setHours(0);
date1.setMinutes(0);
date1.setSeconds(0);
date1.setTime((date1.getTime() / 1000L) * 1000L);
date2.setHours(0);
date2.setMinutes(0);
date2.setSeconds(0);
date2.setTime((date2.getTime() / 1000L) * 1000L);
return date1.equals(date2); // now should do a calendar date only match
Trust me, just use the Calendar / GregorianCalendar class, it's the way forward (until Java adopts something more sophisticated, like joda time.
There is two way you can do it. first one is format both the date in same date format or handle date in string format.
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
String date1 = sdf.format(selectedDate);
String date2 = sdf.format(compareDate);
if(date1.equals(date2)){
}else{
}
Or
Calendar toDate = Calendar.getInstance();
Calendar nowDate = Calendar.getInstance();
toDate.set(<set-year>,<set-month>,<set-date->);
if(!toDate.before(nowDate))
//display your report
else
// don't display the report
Above answers are correct but consider using JodaTime - its much simpler and intuitive API.
You could set DateTime using with* methods and compare them.
Look at this answer
In my app I´m saving when I last updated some data from my server.
Therefore I used:
long time = Calendar.getInstance().getTimeInMillis();
Now I want that the data is updated twice a year at 03.03 and 08.08.
How can I check wheater one of these two date boarders were crossed since last update?
Change them to time in mseconds and compare:
Calendar c = Calendar.getInstance();
c.set(Calendar.MONTH, Calendar.MARCH);
c.set(Calendar.DAY_OF_MONTH, 3);
long time2= c.getTimeInMillis();
c.set(Calendar.MONTH, Calendar.AUGUST);
c.set(Calendar.DAY_OF_MONTH, 8);
long time3= c.getTimeInMillis();
if(time>time2){
//Logic
if(time>time3){
//Logic
}
}
There is something very important which took me a while to figure it out and can be very helpful to people out there, if you are looking for an answer to any of the following questions this is for you:
Why is my date not showing correctly?
Why even when I set the time manually it is not showing right?
Why is the month and the year showing one day less than the one that I set?
For some reason Java sorts the months values like an array, what I mean is that for Java January is 0 and DECEMBER is 11. Same happens for the year, if you set December as month 12 and year as 2012, and then try to do a "system.out.println" of the month and the year, it will show my month as January and the year as 2013!!
so what should you do?
Calendar cal = new GregorianCalendar();
cal.set(2012, 11, 26); // the date I want to input is 26/12/2012 (for Java, 11 is December!)
NOW WHAT IS THE CORRECT WAY TO GET THAT DATE TO SEE IT ON THE SCREEN?
if you try to "system.out.println of yourCalendar.DATE, yourCalendar.MONTH and yourCalendar.YEAR," THAT WILL NOT SHOW YOU THE RIGHT DATE!!!!
If you want to display the dates you need to do the following:
System.out.println (calact.get (calact.DATE));
// displays day
System.out.println (calact.get (calact.MONTH)+1);
//add 1 remember it saves values from 0-11
System.out.println (calact.get (calact.YEAR));
// displays year
NOW IF YOU ARE HANDLING STRINGS THAT REPRESENT DATES, OR....
IF YOU NEED TO COMPARE DATES BETWEEN RANGES , LET'S SAY YOU NEED TO KNOW IF DATE "A" WILL TAKE PLACE WITHIN THE NEXT 10 DAYS....THIS....IS.....FOR....YOU!!
In my case I was working with a string that had format "15/07/2012", I needed to know if that date would take place within the next 10 days, therefore I had to do the following:
1 get that string date and transform it into a calendar ( StringTokenizer was used here )
this is very simple
StringTokenizer tokens=new StringTokenizer(myDateAsString, "/");
do nextToken and before returning the day, parse it as integer and return it.
Remember for month before returning substract 1.
I will post the code for the first you create the other two:
public int getMeD(String fecha){
int miDia = 0;
String tmd = "0";
StringTokenizer tokens=new StringTokenizer(fecha, "/");
tmd = tokens.nextToken();
miDia = Integer.parseInt(tmd);
return miDia;
}
2 THEN YOU CREATE THE CALENDAR
Calendar cal = new GregorianCalendar(); // calendar
String myDateAsString= "15/07/2012"; // my Date As String
int MYcald = getMeD(myDateAsString); // returns integer
int MYcalm = getMeM(myDateAsString); // returns integer
int MYcaly = getMeY(myDateAsString); // returns integer
cal.set(MYcaly, MYcalm, MYcald);
3 get my current date (TODAY)
Calendar curr = new GregorianCalendar(); // current cal
calact.setTimeInMillis(System.currentTimeMillis());
4 create temporal calendar to go into the future 10 days
Calendar caltemp = new GregorianCalendar(); // temp cal
caltemp.setTimeInMillis(System.currentTimeMillis());
caltemp.add(calact.DAY_OF_MONTH, 10); // we move into the future
5 compare among all 3 calendars
here basically you ask if the date that I was given is for sure taking place in the future AND (&&) IF the given date is also less than the future date which had 10 days more, then please show me "EVENT WILL TAKE PLACE FOR SURE WITHIN THE NEXT 10 DAYS!!" OTHERWISE SHOW ME:
"EVENT WILL NOT TAKE PLACE WITHIN THE NEXT 10 DAYS".
if((cal.getTimeInMillis() > curr.getTimeInMillis()) && (cal.getTimeInMillis()< curr.getTimeInMillis()))
{ System.out.println ("EVENT WILL TAKE PLACE FOR SURE WITHIN THE NEXT 10 DAYS!!");}
else
{ System.out.println ("EVENT WILL *NOT* TAKE PLACE WITHIN THE NEXT 10 DAYS");}
ALRIGHT GUYS AND GIRLS I HOPE THAT HELPS. A BIG HUG FOR YOU ALL AND GOOD LUCK WITH YOUR PROJECTS!
PEACE.
YOAV.
If the comparison should involve only the year, month and day then you can use this method for check if c1 is before c2. Ugly, but works.
public static boolean before(Calendar c1, Calendar c2){
int c1Year = c1.get(Calendar.YEAR);
int c1Month = c1.get(Calendar.MONTH);
int c1Day = c1.get(Calendar.DAY_OF_MONTH);
int c2Year = c2.get(Calendar.YEAR);
int c2Month = c2.get(Calendar.MONTH);
int c2Day = c2.get(Calendar.DAY_OF_MONTH);
if(c1Year<c2Year){
return true;
}else if (c1Year>c2Year){
return false;
}else{
if(c1Month>c2Month){
return false;
}else if(c1Month<c2Month){
return true;
}else{
return c1Day<c2Day;
}
}
}
used compareTo method ..and this returns integer value .if returns -ve the days before in current date else return +ve the days after come current date
My program needs to represent this date as a java.sql.date object , but it seems that when I create a new date (using the calendar) and set it to '9999-12-31' and finally convert this java.util.date object to a java.sql.date object, this date is converted to something like '000-01-31'.
Calendar calendar = Calendar.getInstance();
calendar.set(9999, 12, 31);
infinityDate = new java.sql.Date(normalizeDate(calendar.getTime()).getTime());
infinityDate should be 31-12-9999
but when my code reaches here :
if(otherDate.equals(infinityDate))
{// Do stuff}
It never goes into the if condition as the infinityDate has for some reason been changed to 31-01-000, even though otherDate is infact '31-12-9999'.
The fact that otherDate is 31-12-9999 tells me that java can represent this dates , but for some reason , when I construct it using a calendar it changes the date. (otherDate comes from a jdbc statement which fetches data from a database)
This reference date '31-12-9999' has been fixed by some client , so it cannot be changed and my program has to be able to compare some incoming date values with this.
Does anyone know why this is happening , I realize that http://en.wikipedia.org/wiki/Year_10,000_problem may be a problem for dates after year 9999 , but I should be safe by a day.
EDIT : The Normalize date method only "normalizes the given date to midnight of that day"
private static java.util.Date normalizeDate(java.util.Date date) {
Calendar calendar = Calendar.getInstance();
calendar.setTime(date);
calendar.set(Calendar.HOUR_OF_DAY, 0);
calendar.set(Calendar.MINUTE, 0);
calendar.set(Calendar.SECOND, 0);
calendar.set(Calendar.MILLISECOND, 0);
date = calendar.getTime();
return date;
}
But , this issue was appearing before I was normalizing the date , I normalized it in an attempt to fix this.
Months are zero indexed. Use 11 for December, not 12. This is why you are rolling over the year.
Calendar.MONTH is zero-based. The call
calendar.set(9999, 12, 31);
sets the date to "the 31st day in the 13th month of the year 9999", which is then implicitly converted to the 1st month of the year 10000. It would result in an exception if you first called
calendar.setLenient(false);
Check hours, minutes, seconds and milliseconds that are held into these 2 date objects. I believe they are different.
If your want to compare the date (year, month, day) only you should probably create your custom Comparator and use it.