Achieving multiple inheritance via interface

Achieving multiple inheritance via interface - java

I am a beginner in interface concept.
when I surfing for the information about "Achieving multiple inheritance via interface", I came across this link.. Multiple inheritance
I have a same doubt as the programstudent had.
hi, Good Explanation very much helpful In the uml diagram for java
there is no connection to Animal from Bird and horse why? Is it
necessary to use the implement the same method in the derived class
and why
void birdNoise();
void horseNoise();
why in the Peagus class
public void horseNoise()
{
System.out.println("Horse Noise!");
}
public void birdNoise()
{
System.out.println("Bird Noise!");
}
why this must be there? Why "Remember, we must write each class's own implementation for each method in the interface. reason? Thank for this good explanation Thank you
In that post, they have used multiple inheritance in c++ and converted to interfaces in java.
1.what I thought about inheritance is having some methods in parent class, and whenever the same methods are needed in other class(es) too, then those class(es) will inherit the parent class and use it.
But in interface concept if each derived class(es) has to define its own implementation then what is the use of inheriting it?
2.If we have to provide own implementation then why not we define that method in the derived class(es) itself. What is the use of inheriting it?
Someone please explain.
Thanks in advance.

When I switched from c++ to java I had this same feeling but now that I been working with java for a while it all kinda makes sense.
1.what I thought about inheritance is having some methods in parent
class, and whenever the same methods are needed in other class(es)
too, then those class(es) will inherit the parent class and use it.
Like the original author did, you can still do multiple inheritance in java you just must use interfaces. Interfaces are like pure virtual classes in c++.
But in interface concept if each derived class(es) has to define its
own implementation then what is the use of inheriting it?
The reason you implement an interface in java is so that you guarantee that class has those methods. That way you can have a specific class implement a generic interface and then treat every specific class that implements that generic interface the same.
Java Design is a bit different then c++ design but after doing several java program's you will become just as good at using multiple interfaces as you are at using multiple inheritance.

Each subclass has to define it's own implementation because each subclass may perform the operation slightly differently. Consider the following example:
public interface animal {
//All implementers must define this method
void speak();
}
This interface states that any Animal MUST have a way to speak. Basically, any type of animal is going to be able to make a noise. We then have 2 subclass, or 2 different types of animals that we create.
public class Dog implements animal {
//Define how a Dog speaks
public void speak() {
System.out.println( "woof" );
}
}
We then define another animal, cat
public class Cat implements animal {
//Define how a Cat speaks
public void speak() {
System.out.println( "meow" );
}
}
In this example, both Cat and Dog are animals, and therefore must be able to speak due to our interface. However, everybody knows that cats and dogs make different sounds. By allowing each subclass to define how it 'speaks', we can give Dog and Cat their own respective sound when the speak() method is called, while ensuring they are both Animals.
In answer to your question more specifically, inheritance forces it's subclasses to have a specific method. In other words, an interface states that "all my subclasses will define each of these methods". What this allows us to do is to write code that deals with the methods in an interface without knowing the specific subclass. We can safely do that because we know that each subclass MUST have defined the method in the interface class. If only the subclasses that use the method defined it, then we would have no way of knowing for sure whether it is safe to call the method on all subclasses.
Just a note: If you do not want a subclass to define the method, you can simply define an empty method like this:
public class MuteAnimal implements animal {
//A MuteAnimal can't speak!
public void speak() { }
}

Inheritance is often useless without polymorphism. It is really not easy to explain it all just in few sentences. My advices would be to look at interfaces for defining behavior (something like can-do relationship), and concrete inheritence for is-a relationships.
In the center of everything as you may learn is something called Single Responsibility Principle. This means that one class has one responsibility, if you are having more of them, you separate the class.
If you take your example, even the Pegasus isn't both horse and bird at the same time 100% percent. It would inherit the horse, but implement specific characteristics of the birds, which would be defined in interfaces, like Flyable for instance. You can say that birds have one way of flying common to them all, so inherit them from Bird. Pegasus is a little different, so that custom logic can be defined after you implement the Flyable interface with method Fly.
Also, the example with horseNoise and birdNoise is little unrealistic, you want one method speak() which will due to internal class alhorithm perform certain action. What if that pegasus could talk? Would you have a method for each word?
Back to Flyable example, say you now have a video-game. Now you can have polimorphism for this: Lets say that in game earthquake happens. You want for each animal that can fly to go and fly. You have a collection of animals currently in game, so you write this:
foreach(Flyable flyableAnimal in animals)
flyableAnimal.Fly();
You just rely on polimorphism ...
These were just some random thoughts, you can find far better examples online, hope this helps ...

If class A inherits from class B, that effectively means two things:
Class A can implicitly use all methods and properties of class B, and need only define that functionality which is in fact unique to class A.
Code which expects an object of type B will accept an object of type A.
Those two features of inheritance are in some sense orthogonal; one can imagine places where either could be useful without the other. Although derived classes can only have one parent class from which they gain implicit access to methods and properties, they may define an arbitrary number of interfaces for which they are substitutable.
Note that while some people insist that interfaces form a "has-a" rather than "is-a" relationship, I think it's better to think of them as saying something "is __able" or "is a __er", the point being that interfaces don't just define abilities, but define substitutability (i.e. "is a") in terms of ability.

Related

If I want a subtype to only be deriveable from a single Supertype, should I be using abstract classes intead of an interface to ensure that?

Basically the question in the title but here a little more detail:
I have a set of classes you can create similar objects of (e.g. animals and I have the classes Tiger, Crocodile, Wolf etc. whatever you like). And the types of those objects are specified by the Supertype they are derived from. Now some objects might derive from multiple Supertypes, which obviously need to be implemented as Interfaces. But lets say I have a specific Supertype which I want each animal to only derive EXACTLY ONCE from (e.g. the animal family they belong to). Does this automatically mean that this Supertype should be an abstract class to ensure it can only be extended once in a Subtype?
Edit since Michael pointed out that my question is unclear.
This question is not about a specific piece of code it is more a theoretical question about types, maybe I should ask like this: Can and should an abstract class be used as a tool to ensure a Subtype of this Supertype can only derive it once. Lets say for my example with animals I have the Supertypes "Omnivore", "Herbivore" and "Carnivore" and I know an animal can only be exactly one of those, is this a valid reason to make those abstract classes and not interfaces?

If you have different exclusive categories then different base classes (abstract or not) is a sensible solution.
class HerbivoreBase implements Animal, EatsVegetables { ... }
class CarnivoreBase implements Animal, EatsAnimals { ... }
class OmnivoreBase implements Animal, EatsVegetables, EatsAnimals { ... }
It only makes sense when the classes have (differing) methods.
To look at other languages. Scala has case classes (the name says it all) with pattern matching.
Java also has (will have?) pattern matching based on classes, and instanceof as follows:
Animal animal = ...
if (animal instanceof Herbivore herbi) { ... herbi.eatVegy(...); ... }
else if (animal instanceof Carnivore carni) { ... carni.hunts(...); ... }
Java has also introduced a restricting mechanism to list which classes may be child of a given class, say abstract class Animal.
I would still like to mention, that modeling with inheritance can easily over-architect things, especially if later a change is needed, or the code becomes bloated.

Your question is more about "should I use an interface, or a class (and extend it)?"
Remember that a subclass has a relationship of is-a with its base class. A class has a relationship of has-a with an interface.
An interface define a behaviour that one class has (a car has 4 wheels) (remember also that an interface should define only one behaviour, related to the interface segregation principle, which says that it's better to have more smaller and specific interfaces than one general and bigger, so that classes can implements only needed behaviours), a superclass define a "more general" type (dog is an animal).
See for example:
If you have a MountainBike class, it will implement an interface Bike, or extend a class Bike? It will extend the Bike class, since mountain bike is a "sub-type" of bike.
If you have an Elephant class, it will implement an interface Trunk or extend a class Trunk? It will implement the Trunk interface, since trunk is a part (behaviour) of the elephant, not a "container".

An interface is a way to define signature of a method, but normally it does not define the implementation of a given method. If you want to implement a method in an interface, use the default keyword
interface inter{
public default void myMethod(){/*your code here*/
}
A class can implement multiple interfaces but cannot extend more than one class.
If you are using an abstract class you are can use the following two benefits
The abstract class cannot be initialized
The abstract class can implement abstract methods.
A subclass can still only extend one class, abstract or not.
Your question was: "If I want a superclass to only be derivable from a single subclass, which should I use? Interface or abstract class?"
By derivable, do you mean inheritance? Because if that's the case, then I think you got the question backwards. Subclasses inherit from the superclasses.
The child (subclass) inherits from its parent (superclass)

When should I write interface and abstract class [duplicate]

I have recently had two telephone interviews where I've been asked about the differences between an Interface and an Abstract class. I have explained every aspect of them I could think of, but it seems they are waiting for me to mention something specific, and I don't know what it is.
From my experience I think the following is true. If I am missing a major point please let me know.
Interface:
Every single Method declared in an Interface will have to be implemented in the subclass.
Only Events, Delegates, Properties (C#) and Methods can exist in an Interface. A class can implement multiple Interfaces.
Abstract Class:
Only Abstract methods have to be implemented by the subclass. An Abstract class can have normal methods with implementations. An Abstract class can also have class variables besides Events, Delegates, Properties and Methods. A class can implement one abstract class only due to the non-existence of Multi-inheritance in C#.
After all that, the interviewer came up with the question "What if you had an Abstract class with only abstract methods? How would that be different from an interface?" I didn't know the answer but I think it's the inheritance as mentioned above right?
Another interviewer asked me, "What if you had a Public variable inside the interface, how would that be different than in a Abstract Class?" I insisted you can't have a public variable inside an interface. I didn't know what he wanted to hear but he wasn't satisfied either.
See Also:
When to use an interface instead of an abstract class and vice versa
Interfaces vs. Abstract Classes
How do you decide between using an Abstract Class and an Interface?
What is the difference between an interface and abstract class?

How about an analogy: when I was in the Air Force, I went to pilot training and became a USAF (US Air Force) pilot. At that point I wasn't qualified to fly anything, and had to attend aircraft type training. Once I qualified, I was a pilot (Abstract class) and a C-141 pilot (concrete class). At one of my assignments, I was given an additional duty: Safety Officer. Now I was still a pilot and a C-141 pilot, but I also performed Safety Officer duties (I implemented ISafetyOfficer, so to speak). A pilot wasn't required to be a safety officer, other people could have done it as well.
All USAF pilots have to follow certain Air Force-wide regulations, and all C-141 (or F-16, or T-38) pilots 'are' USAF pilots. Anyone can be a safety officer. So, to summarize:
Pilot: abstract class
C-141 Pilot: concrete class
ISafety Officer: interface
added note: this was meant to be an analogy to help explain the concept, not a coding recommendation. See the various comments below, the discussion is interesting.

While your question indicates it's for "general OO", it really seems to be focusing on .NET use of these terms.
In .NET (similar for Java):
interfaces can have no state or implementation
a class that implements an interface must provide an implementation of all the methods of that interface
abstract classes may contain state (data members) and/or implementation (methods)
abstract classes can be inherited without implementing the abstract methods (though such a derived class is abstract itself)
interfaces may be multiple-inherited, abstract classes may not (this is probably the key concrete reason for interfaces to exist separately from abtract classes - they permit an implementation of multiple inheritance that removes many of the problems of general MI).
As general OO terms, the differences are not necessarily well-defined. For example, there are C++ programmers who may hold similar rigid definitions (interfaces are a strict subset of abstract classes that cannot contain implementation), while some may say that an abstract class with some default implementations is still an interface or that a non-abstract class can still define an interface.
Indeed, there is a C++ idiom called the Non-Virtual Interface (NVI) where the public methods are non-virtual methods that 'thunk' to private virtual methods:
http://www.gotw.ca/publications/mill18.htm
http://en.wikibooks.org/wiki/More_C%2B%2B_Idioms/Non-Virtual_Interface

I think the answer they are looking for is the fundamental or OPPS philosophical difference.
The abstract class inheritance is used when the derived class shares the core properties and behaviour of the abstract class. The kind of behaviour that actually defines the class.
On the other hand interface inheritance is used when the classes share peripheral behaviour, ones which do not necessarily define the derived class.
For eg. A Car and a Truck share a lot of core properties and behaviour of an Automobile abstract class, but they also share some peripheral behaviour like Generate exhaust which even non automobile classes like Drillers or PowerGenerators share and doesn't necessarily defines a Car or a Truck, so Car, Truck, Driller and PowerGenerator can all share the same interface IExhaust.

Short: Abstract classes are used for Modelling a class hierarchy of similar looking classes (For example Animal can be abstract class and Human , Lion, Tiger can be concrete derived classes)
AND
Interface is used for Communication between 2 similar / non similar classes which does not care about type of the class implementing Interface(e.g. Height can be interface property and it can be implemented by Human , Building , Tree. It does not matter if you can eat , you can swim you can die or anything.. it matters only a thing that you need to have Height (implementation in you class) ).

There are a couple of other differences -
Interfaces can't have any concrete implementations. Abstract base classes can. This allows you to provide concrete implementations there. This can allow an abstract base class to actually provide a more rigorous contract, wheras an interface really only describes how a class is used. (The abstract base class can have non-virtual members defining the behavior, which gives more control to the base class author.)
More than one interface can be implemented on a class. A class can only derive from a single abstract base class. This allows for polymorphic hierarchy using interfaces, but not abstract base classes. This also allows for a pseudo-multi-inheritance using interfaces.
Abstract base classes can be modified in v2+ without breaking the API. Changes to interfaces are breaking changes.
[C#/.NET Specific] Interfaces, unlike abstract base classes, can be applied to value types (structs). Structs cannot inherit from abstract base classes. This allows behavioral contracts/usage guidelines to be applied on value types.

Inheritance
Consider a car and a bus. They are two different vehicles. But still, they share some common properties like they have a steering, brakes, gears, engine etc.
So with the inheritance concept, this can be represented as following ...
public class Vehicle {
private Driver driver;
private Seat[] seatArray; //In java and most of the Object Oriented Programming(OOP) languages, square brackets are used to denote arrays(Collections).
//You can define as many properties as you want here ...
}
Now a Bicycle ...
public class Bicycle extends Vehicle {
//You define properties which are unique to bicycles here ...
private Pedal pedal;
}
And a Car ...
public class Car extends Vehicle {
private Engine engine;
private Door[] doors;
}
That's all about Inheritance. We use them to classify objects into simpler Base forms and their children as we saw above.
Abstract Classes
Abstract classes are incomplete objects. To understand it further, let's consider the vehicle analogy once again.
A vehicle can be driven. Right? But different vehicles are driven in different ways ... For example, You cannot drive a car just as you drive a Bicycle.
So how to represent the drive function of a vehicle? It is harder to check what type of vehicle it is and drive it with its own function; you would have to change the Driver class again and again when adding a new type of vehicle.
Here comes the role of abstract classes and methods. You can define the drive method as abstract to tell that every inheriting children must implement this function.
So if you modify the vehicle class ...
//......Code of Vehicle Class
abstract public void drive();
//.....Code continues
The Bicycle and Car must also specify how to drive it. Otherwise, the code won't compile and an error is thrown.
In short.. an abstract class is a partially incomplete class with some incomplete functions, which the inheriting children must specify their own.
Interfaces
Interfaces are totally incomplete. They do not have any properties. They just indicate that the inheriting children are capable of doing something ...
Suppose you have different types of mobile phones with you. Each of them has different ways to do different functions; Ex: call a person. The maker of the phone specifies how to do it. Here the mobile phones can dial a number - that is, it is dial-able. Let's represent this as an interface.
public interface Dialable {
public void dial(Number n);
}
Here the maker of the Dialable defines how to dial a number. You just need to give it a number to dial.
// Makers define how exactly dialable work inside.
Dialable PHONE1 = new Dialable() {
public void dial(Number n) {
//Do the phone1's own way to dial a number
}
}
Dialable PHONE2 = new Dialable() {
public void dial(Number n) {
//Do the phone2's own way to dial a number
}
}
//Suppose there is a function written by someone else, which expects a Dialable
......
public static void main(String[] args) {
Dialable myDialable = SomeLibrary.PHONE1;
SomeOtherLibrary.doSomethingUsingADialable(myDialable);
}
.....
Hereby using interfaces instead of abstract classes, the writer of the function which uses a Dialable need not worry about its properties. Ex: Does it have a touch-screen or dial pad, Is it a fixed landline phone or mobile phone. You just need to know if it is dialable; does it inherit(or implement) the Dialable interface.
And more importantly, if someday you switch the Dialable with a different one
......
public static void main(String[] args) {
Dialable myDialable = SomeLibrary.PHONE2; // <-- changed from PHONE1 to PHONE2
SomeOtherLibrary.doSomethingUsingADialable(myDialable);
}
.....
You can be sure that the code still works perfectly because the function which uses the dialable does not (and cannot) depend on the details other than those specified in the Dialable interface. They both implement a Dialable interface and that's the only thing the function cares about.
Interfaces are commonly used by developers to ensure interoperability(use interchangeably) between objects, as far as they share a common function (just like you may change to a landline or mobile phone, as far as you just need to dial a number). In short, interfaces are a much simpler version of abstract classes, without any properties.
Also, note that you may implement(inherit) as many interfaces as you want but you may only extend(inherit) a single parent class.
More Info
Abstract classes vs Interfaces

If you consider java as OOP language to answer this question, Java 8 release causes some of the content in above answers as obsolete. Now java interface can have default methods with concrete implementation.
Oracle website provides key differences between interface and abstract class.
Consider using abstract classes if :
You want to share code among several closely related classes.
You expect that classes that extend your abstract class have many common methods or fields, or require access modifiers other than public (such as protected and private).
You want to declare non-static or non-final fields.
Consider using interfaces if :
You expect that unrelated classes would implement your interface. For example,many unrelated objects can implement Serializable interface.
You want to specify the behaviour of a particular data type, but not concerned about who implements its behaviour.
You want to take advantage of multiple inheritance of type.
In simple terms, I would like to use
interface: To implement a contract by multiple unrelated objects
abstract class: To implement the same or different behaviour among multiple related objects
Have a look at code example to understand things in clear way : How should I have explained the difference between an Interface and an Abstract class?

The interviewers are barking up an odd tree. For languages like C# and Java, there is a difference, but in other languages like C++ there is not. OO theory doesn't differentiate the two, merely the syntax of language.
An abstract class is a class with both implementation and interface (pure virtual methods) that will be inherited. Interfaces generally do not have any implementation but only pure virtual functions.
In C# or Java an abstract class without any implementation differs from an interface only in the syntax used to inherit from it and the fact you can only inherit from one.

By implementing interfaces you are achieving composition ("has-a" relationships) instead of inheritance ("is-a" relationships). That is an important principle to remember when it comes to things like design patterns where you need to use interfaces to achieve a composition of behaviors instead of an inheritance.

These answers are all too long.
Interfaces are for defining behaviors.
Abstract classes are for defining a thing itself, including its behaviors. That's why we sometimes create an abstract class with some extra properties inheriting an interface.
This also explains why Java only supports single inheritance for classes but puts no restriction on interfaces. Because a concrete object can not be different things, but it can have different behaviors.

Conceptually speaking, keeping the language specific implementation, rules, benefits and achieving any programming goal by using anyone or both, can or cant have code/data/property, blah blah, single or multiple inheritances, all aside
1- Abstract (or pure abstract) Class is meant to implement hierarchy. If your business objects look somewhat structurally similar, representing a parent-child (hierarchy) kind of relationship only then inheritance/Abstract classes will be used. If your business model does not have a hierarchy then inheritance should not be used (here I am not talking about programming logic e.g. some design patterns require inheritance). Conceptually, abstract class is a method to implement hierarchy of a business model in OOP, it has nothing to do with Interfaces, actually comparing Abstract class with Interface is meaningless because both are conceptually totally different things, it is asked in interviews just to check the concepts because it looks both provide somewhat same functionality when implementation is concerned and we programmers usually emphasize more on coding. [Keep this in mind as well that Abstraction is different than Abstract Class].
2- an Interface is a contract, a complete business functionality represented by one or more set of functions. That is why it is implemented and not inherited. A business object (part of a hierarchy or not) can have any number of complete business functionality. It has nothing to do with abstract classes means inheritance in general. For example, a human can RUN, an elephant can RUN, a bird can RUN, and so on, all these objects of different hierarchy would implement the RUN interface or EAT or SPEAK interface. Don't go into implementation as you might implement it as having abstract classes for each type implementing these interfaces. An object of any hierarchy can have a functionality(interface) which has nothing to do with its hierarchy.
I believe, Interfaces were not invented to achieve multiple inheritances or to expose public behavior, and similarly, pure abstract classes are not to overrule interfaces but Interface is a functionality that an object can do (via functions of that interface) and Abstract Class represents a parent of a hierarchy to produce children having core structure (property+functionality) of the parent
When you are asked about the difference, it is actually conceptual difference not the difference in language-specific implementation unless asked explicitly.
I believe, both interviewers were expecting one line straightforward difference between these two and when you failed they tried to drove you towards this difference by implementing ONE as the OTHER
What if you had an Abstract class with only abstract methods?

i will explain Depth Details of interface and Abstract class.if you know overview about interface and abstract class, then first question arrive in your mind when we should use Interface and when we should use Abstract class.
So please check below explanation of Interface and Abstract class.
When we should use Interface?
if you don't know about implementation just we have requirement specification then we go with Interface
When we should use Abstract Class?
if you know implementation but not completely (partially implementation) then we go with Abstract class.
Interface
every method by default public abstract means interface is 100% pure abstract.
Abstract
can have Concrete method and Abstract method, what is Concrete method, which have implementation in Abstract class,
An abstract class is a class that is declared abstract—it may or may not include abstract methods.
Interface
We cannot declared interface as a private, protected
Q. Why we are not declaring Interface a private and protected?
Because by default interface method is public abstract so and so that reason that we are not declaring the interface as private and protected.
Interface method
also we cannot declared interface as private,protected,final,static,synchronized,native.....
i will give the reason:
why we are not declaring synchronized method because we cannot create object of interface and synchronize are work on object so and son reason that we are not declaring the synchronized method
Transient concept are also not applicable because transient work with synchronized.
Abstract
we are happily use with public,private final static.... means no restriction are applicable in abstract.
Interface
Variables are declared in Interface as a by default public static final so we are also not declared variable as a private, protected.
Volatile modifier is also not applicable in interface because interface variable is by default public static final and final variable you cannot change the value once it assign the value into variable and once you declared variable into interface you must to assign the variable.
And volatile variable is keep on changes so it is opp. to final that is reason we are not use volatile variable in interface.
Abstract
Abstract variable no need to declared public static final.
i hope this article is useful.

For .Net,
Your answer to The second interviewer is also the answer to the first one... Abstract classes can have implementation, AND state, interfaces cannot...
EDIT: On another note, I wouldn't even use the phrase 'subclass' (or the 'inheritance' phrase) to describe classes that are 'defined to implement' an interface. To me, an interface is a definition of a contract that a class must conform to if it has been defined to 'implement' that interface. It does not inherit anything... You have to add everything yourself, explicitly.

Interface : should be used if you want to imply a rule on the components which may or may not be
related to each other
Pros:
Allows multiple inheritance
Provides abstraction by not exposing what exact kind of object is being used in the context
provides consistency by a specific signature of the contract
Cons:
Must implement all the contracts defined
Cannot have variables or delegates
Once defined cannot be changed without breaking all the classes
Abstract Class : should be used where you want to have some basic or default behaviour or implementation for components related to each other
Pros:
Faster than interface
Has flexibility in the implementation (you can implement it fully or partially)
Can be easily changed without breaking the derived classes
Cons:
Cannot be instantiated
Does not support multiple inheritance

I think they didn't like your response because you gave the technical differences instead of design ones. The question is like a troll question for me. In fact, interfaces and abstract classes have a completely different nature so you cannot really compare them. I will give you my vision of what is the role of an interface and what is the role of an abstract class.
interface: is used to ensure a contract and make a low coupling between classes in order to have a more maintainable, scalable and testable application.
abstract class: is only used to factorize some code between classes of the same responsability. Note that this is the main reason why multiple-inheritance is a bad thing in OOP, because a class shouldn't handle many responsabilities (use composition instead).
So interfaces have a real architectural role whereas abstract classes are almost only a detail of implementation (if you use it correctly of course).

Interface:
We do not implement (or define) methods, we do that in derived classes.
We do not declare member variables in interfaces.
Interfaces express the HAS-A relationship. That means they are a mask of objects.
Abstract class:
We can declare and define methods in abstract class.
We hide constructors of it. That means there is no object created from it directly.
Abstract class can hold member variables.
Derived classes inherit to abstract class that mean objects from derived classes are not masked, it inherit to abstract class. The relationship in this case is IS-A.
This is my opinion.

After all that, the interviewer came up with the question "What if you had an
Abstract class with only abstract methods? How would that be different
from an interface?"
Docs clearly say that if an abstract class contains only abstract method declarations, it should be declared as an interface instead.
An another interviewer asked me what if you had a Public variable inside
the interface, how would that be different than in Abstract Class?
Variables in Interfaces are by default public static and final. Question could be framed like what if all variables in abstract class are public? Well they can still be non static and non final unlike the variables in interfaces.
Finally I would add one more point to those mentioned above - abstract classes are still classes and fall in a single inheritance tree whereas interfaces can be present in multiple inheritance.

Copied from CLR via C# by Jeffrey Richter...
I often hear the question, “Should I design a base type or an interface?” The answer isn’t always clearcut.
Here are some guidelines that might help you:
■■ IS-A vs. CAN-DO relationship A type can inherit only one implementation. If the derived
type can’t claim an IS-A relationship with the base type, don’t use a base type; use an interface.
Interfaces imply a CAN-DO relationship. If the CAN-DO functionality appears to belong
with various object types, use an interface. For example, a type can convert instances of itself
to another type (IConvertible), a type can serialize an instance of itself (ISerializable),
etc. Note that value types must be derived from System.ValueType, and therefore, they cannot
be derived from an arbitrary base class. In this case, you must use a CAN-DO relationship
and define an interface.
■■ Ease of use It’s generally easier for you as a developer to define a new type derived from a
base type than to implement all of the methods of an interface. The base type can provide a
lot of functionality, so the derived type probably needs only relatively small modifications to its behavior. If you supply an interface, the new type must implement all of the members.
■■ Consistent implementation No matter how well an interface contract is documented, it’s
very unlikely that everyone will implement the contract 100 percent correctly. In fact, COM
suffers from this very problem, which is why some COM objects work correctly only with
Microsoft
Word or with Windows Internet Explorer. By providing a base type with a good
default implementation, you start off using a type that works and is well tested; you can then
modify parts that need modification.
■■ Versioning If you add a method to the base type, the derived type inherits the new method,
you start off using a type that works, and the user’s source code doesn’t even have to be recompiled.
Adding a new member to an interface forces the inheritor of the interface to change
its source code and recompile.

tl;dr; When you see “Is A” relationship use inheritance/abstract class. when you see “has a” relationship create member variables. When you see “relies on external provider” implement (not inherit) an interface.
Interview Question: What is the difference between an interface and an abstract class? And how do you decide when to use what? I mostly get one or all of the below answers: Answer 1: You cannot create an object of abstract class and interfaces.
ZK (That’s my initials): You cannot create an object of either. So this is not a difference. This is a similarity between an interface and an abstract class. Counter Question: Why can’t you create an object of abstract class or interface?
Answer 2: Abstract classes can have a function body as partial/default implementation.
ZK: Counter Question: So if I change it to a pure abstract class, marking all the virtual functions as abstract and provide no default implementation for any virtual function. Would that make abstract classes and interfaces the same? And could they be used interchangeably after that?
Answer 3: Interfaces allow multi-inheritance and abstract classes don’t.
ZK: Counter Question: Do you really inherit from an interface? or do you just implement an interface and, inherit from an abstract class? What’s the difference between implementing and inheriting? These counter questions throw candidates off and make most scratch their heads or just pass to the next question. That makes me think people need help with these basic building blocks of Object-Oriented Programming. The answer to the original question and all the counter questions is found in the English language and the UML. You must know at least below to understand these two constructs better.
Common Noun: A common noun is a name given “in common” to things of the same class or kind. For e.g. fruits, animals, city, car etc.
Proper Noun: A proper noun is the name of an object, place or thing. Apple, Cat, New York, Honda Accord etc.
Car is a Common Noun. And Honda Accord is a Proper Noun, and probably a Composit Proper noun, a proper noun made using two nouns.
Coming to the UML Part. You should be familiar with below relationships:
Is A
Has A
Uses
Let’s consider the below two sentences. - HondaAccord Is A Car? - HondaAccord Has A Car?
Which one sounds correct? Plain English and comprehension. HondaAccord and Cars share an “Is A” relationship. Honda accord doesn’t have a car in it. It “is a” car. Honda Accord “has a” music player in it.
When two entities share the “Is A” relationship it’s a better candidate for inheritance. And Has a relationship is a better candidate for creating member variables. With this established our code looks like this:
abstract class Car
{
string color;
int speed;
}
class HondaAccord : Car
{
MusicPlayer musicPlayer;
}
Now Honda doesn't manufacture music players. Or at least it’s not their main business.
So they reach out to other companies and sign a contract. If you receive power here and the output signal on these two wires it’ll play just fine on these speakers.
This makes Music Player a perfect candidate for an interface. You don’t care who provides support for it as long as the connections work just fine.
You can replace the MusicPlayer of LG with Sony or the other way. And it won’t change a thing in Honda Accord.
Why can’t you create an object of abstract classes?
Because you can’t walk into a showroom and say give me a car. You’ll have to provide a proper noun. What car? Probably a honda accord. And that’s when a sales agent could get you something.
Why can’t you create an object of an interface? Because you can’t walk into a showroom and say give me a contract of music player. It won’t help. Interfaces sit between consumers and providers just to facilitate an agreement. What will you do with a copy of the agreement? It won’t play music.
Why do interfaces allow multiple inheritance?
Interfaces are not inherited. Interfaces are implemented. The interface is a candidate for interaction with the external world. Honda Accord has an interface for refueling. It has interfaces for inflating tires. And the same hose that is used to inflate a football. So the new code will look like below:
abstract class Car
{
string color;
int speed;
}
class HondaAccord : Car, IInflateAir, IRefueling
{
MusicPlayer musicPlayer;
}
And the English will read like this “Honda Accord is a Car that supports inflating tire and refueling”.

An interface defines a contract for a service or set of services. They provide polymorphism in a horizontal manner in that two completely unrelated classes can implement the same interface but be used interchangeably as a parameter of the type of interface they implement, as both classes have promised to satisfy the set of services defined by the interface. Interfaces provide no implementation details.
An abstract class defines a base structure for its sublcasses, and optionally partial implementation. Abstract classes provide polymorphism in a vertical, but directional manner, in that any class that inherits the abstract class can be treated as an instance of that abstract class but not the other way around. Abstract classes can and often do contain implementation details, but cannot be instantiated on their own- only their subclasses can be "newed up".
C# does allow for interface inheritance as well, mind you.

Most answers focus on the technical difference between Abstract Class and Interface, but since technically, an interface is basically a kind of abstract class (one without any data or implementation), I think the conceptual difference is far more interesting, and that might be what the interviewers are after.
An Interface is an agreement. It specifies: "this is how we're going to talk to each other". It can't have any implementation because it's not supposed to have any implementation. It's a contract. It's like the .h header files in C.
An Abstract Class is an incomplete implementation. A class may or may not implement an interface, and an abstract class doesn't have to implement it completely. An abstract class without any implementation is kind of useless, but totally legal.
Basically any class, abstract or not, is about what it is, whereas an interface is about how you use it. For example: Animal might be an abstract class implementing some basic metabolic functions, and specifying abstract methods for breathing and locomotion without giving an implementation, because it has no idea whether it should breathe through gills or lungs, and whether it flies, swims, walks or crawls. Mount, on the other hand, might be an Interface, which specifies that you can ride the animal, without knowing what kind of animal it is (or whether it's an animal at all!).
The fact that behind the scenes, an interface is basically an abstract class with only abstract methods, doesn't matter. Conceptually, they fill totally different roles.

Interfaces are light weight way to enforce a particular behavior. That is one way to think of.

As you might have got the theoretical knowledge from the experts, I am not spending much words in repeating all those here, rather let me explain with a simple example where we can use/cannot use Interface and Abstract class.
Consider you are designing an application to list all the features of Cars. In various points you need inheritance in common, as some of the properties like DigitalFuelMeter, Air Conditioning, Seat adjustment, etc are common for all the cars. Likewise, we need inheritance for some classes only as some of the properties like the Braking system (ABS,EBD) are applicable only for some cars.
The below class acts as a base class for all the cars:
public class Cars
{
public string DigitalFuelMeter()
{
return "I have DigitalFuelMeter";
}
public string AirCondition()
{
return "I have AC";
}
public string SeatAdjust()
{
return "I can Adjust seat";
}
}
Consider we have a separate class for each Cars.
public class Alto : Cars
{
// Have all the features of Car class
}
public class Verna : Cars
{
// Have all the features of Car class + Car need to inherit ABS as the Braking technology feature which is not in Cars
}
public class Cruze : Cars
{
// Have all the features of Car class + Car need to inherit EBD as the Braking technology feature which is not in Cars
}
Consider we need a method for inheriting the Braking technology for the cars Verna and Cruze (not applicable for Alto). Though both uses braking technology, the "technology" is different. So we are creating an abstract class in which the method will be declared as Abstract and it should be implemented in its child classes.
public abstract class Brake
{
public abstract string GetBrakeTechnology();
}
Now we are trying to inherit from this abstract class and the type of braking system is implemented in Verna and Cruze:
public class Verna : Cars,Brake
{
public override string GetBrakeTechnology()
{
return "I use ABS system for braking";
}
}
public class Cruze : Cars,Brake
{
public override string GetBrakeTechnology()
{
return "I use EBD system for braking";
}
}
See the problem in the above two classes? They inherit from multiple classes which C#.Net doesn't allow even though the method is implemented in the children. Here it comes the need of Interface.
interface IBrakeTechnology
{
string GetBrakeTechnology();
}
And the implementation is given below:
public class Verna : Cars, IBrakeTechnology
{
public string GetBrakeTechnology()
{
return "I use ABS system for braking";
}
}
public class Cruze : Cars, IBrakeTechnology
{
public string GetBrakeTechnology()
{
return "I use EBD system for braking";
}
}
Now Verna and Cruze can achieve multiple inheritance with its own kind of braking technologies with the help of Interface.

1) An interface can be seen as a pure Abstract Class, is the same, but despite this, is not the same to implement an interface and inheriting from an abstract class. When you inherit from this pure abstract class you are defining a hierarchy -> inheritance, if you implement the interface you are not, and you can implement as many interfaces as you want, but you can only inherit from one class.
2) You can define a property in an interface, so the class that implements that interface must have that property.
For example:
public interface IVariable
{
string name {get; set;}
}
The class that implements that interface must have a property like that.

Though this question is quite old, I would like to add one other point in favor of interfaces:
Interfaces can be injected using any Dependency Injection tools where as Abstract class injection supported by very few.

From another answer of mine, mostly dealing with when to use one versus the other:
In my experience, interfaces are best
used when you have several classes
which each need to respond to the same
method or methods so that they can be
used interchangeably by other code
which will be written against those
classes' common interface. The best
use of an interface is when the
protocol is important but the
underlying logic may be different for
each class. If you would otherwise be
duplicating logic, consider abstract
classes or standard class inheritance
instead.

Interface Types vs. Abstract Base Classes
Adapted from the Pro C# 5.0 and the .NET 4.5 Framework book.
The interface type might seem very similar to an abstract base class. Recall
that when a class is marked as abstract, it may define any number of abstract members to provide a
polymorphic interface to all derived types. However, even when a class does define a set of abstract
members, it is also free to define any number of constructors, field data, nonabstract members (with
implementation), and so on. Interfaces, on the other hand, contain only abstract member definitions.
The polymorphic interface established by an abstract parent class suffers from one major limitation
in that only derived types support the members defined by the abstract parent. However, in larger
software systems, it is very common to develop multiple class hierarchies that have no common parent
beyond System.Object. Given that abstract members in an abstract base class apply only to derived
types, we have no way to configure types in different hierarchies to support the same polymorphic
interface. By way of example, assume you have defined the following abstract class:
public abstract class CloneableType
{
// Only derived types can support this
// "polymorphic interface." Classes in other
// hierarchies have no access to this abstract
// member.
public abstract object Clone();
}
Given this definition, only members that extend CloneableType are able to support the Clone()
method. If you create a new set of classes that do not extend this base class, you can’t gain this
polymorphic interface. Also, you might recall that C# does not support multiple inheritance for classes.
Therefore, if you wanted to create a MiniVan that is-a Car and is-a CloneableType, you are unable to do so:
// Nope! Multiple inheritance is not possible in C#
// for classes.
public class MiniVan : Car, CloneableType
{
}
As you would guess, interface types come to the rescue. After an interface has been defined, it can
be implemented by any class or structure, in any hierarchy, within any namespace or any assembly
(written in any .NET programming language). As you can see, interfaces are highly polymorphic.
Consider the standard .NET interface named ICloneable, defined in the System namespace. This
interface defines a single method named Clone():
public interface ICloneable
{
object Clone();
}

Answer to the second question : public variable defined in interface is static final by default while the public variable in abstract class is an instance variable.

From Coding Perspective
An Interface can replace an Abstract Class if the Abstract Class has only abstract methods. Otherwise changing Abstract class to interface means that you will be losing out on code re-usability which Inheritance provides.
From Design Perspective
Keep it as an Abstract Class if it's an "Is a" relationship and you need a subset or all of the functionality. Keep it as Interface if it's a "Should Do" relationship.
Decide what you need: just the policy enforcement, or code re-usability AND policy.

For sure it is important to understand the behavior of interface and abstract class in OOP (and how languages handle them), but I think it is also important to understand what exactly each term means. Can you imagine the if command not working exactly as the meaning of the term? Also, actually some languages are reducing, even more, the differences between an interface and an abstract... if by chance one day the two terms operate almost identically, at least you can define yourself where (and why) should any of them be used for.
If you read through some dictionaries and other fonts you may find different meanings for the same term but having some common definitions. I think these two meanings I found in this site are really, really good and suitable.
Interface:
A thing or circumstance that enables separate and sometimes incompatible elements to coordinate effectively.
Abstract:
Something that concentrates in itself the essential qualities of anything more extensive or more general, or of several things; essence.
Example:
You bought a car and it needs fuel.
Your car model is XYZ, which is of genre ABC, so it is a concrete car, a specific instance of a car. A car is not a real object. In fact, it is an abstract set of standards (qualities) to create a specific object. In short, Car is an abstract class, it is "something that concentrates in itself the essential qualities of anything more extensive or more general".
The only fuel that matches the car manual specification should be used to fill up the car tank. In reality, there is nothing to restrict you to put any fuel but the engine will work properly only with the specified fuel, so it is better to follow its requirements. The requirements say that it accepts, as other cars of the same genre ABC, a standard set of fuel.
In an Object Oriented view, fuel for genre ABC should not be declared as a class because there is no concrete fuel for a specific genre of car out there. Although your car could accept an abstract class Fuel or VehicularFuel, you must remember that your only some of the existing vehicular fuel meet the specification, those that implement the requirements in your car manual. In short, they should implement the interface ABCGenreFuel, which "... enables separate and sometimes incompatible elements to coordinate effectively".
Addendum
In addition, I think you should keep in mind the meaning of the term class, which is (from the same site previously mentioned):
Class:
A number of persons or things regarded as forming a group by reason of common attributes, characteristics, qualities, or traits; kind;
This way, a class (or abstract class) should not represent only common attributes (like an interface), but some kind of group with common attributes. An interface doesn't need to represent a kind. It must represent common attributes. This way, I think classes and abstract classes may be used to represent things that should not change its aspects often, like a human being a Mammal, because it represents some kinds. Kinds should not change themselves that often.

Interface vs Abstract classes in project modules [duplicate]

I have recently had two telephone interviews where I've been asked about the differences between an Interface and an Abstract class. I have explained every aspect of them I could think of, but it seems they are waiting for me to mention something specific, and I don't know what it is.
From my experience I think the following is true. If I am missing a major point please let me know.
Interface:
Every single Method declared in an Interface will have to be implemented in the subclass.
Only Events, Delegates, Properties (C#) and Methods can exist in an Interface. A class can implement multiple Interfaces.
Abstract Class:
Only Abstract methods have to be implemented by the subclass. An Abstract class can have normal methods with implementations. An Abstract class can also have class variables besides Events, Delegates, Properties and Methods. A class can implement one abstract class only due to the non-existence of Multi-inheritance in C#.
After all that, the interviewer came up with the question "What if you had an Abstract class with only abstract methods? How would that be different from an interface?" I didn't know the answer but I think it's the inheritance as mentioned above right?
Another interviewer asked me, "What if you had a Public variable inside the interface, how would that be different than in a Abstract Class?" I insisted you can't have a public variable inside an interface. I didn't know what he wanted to hear but he wasn't satisfied either.
See Also:
When to use an interface instead of an abstract class and vice versa
Interfaces vs. Abstract Classes
How do you decide between using an Abstract Class and an Interface?
What is the difference between an interface and abstract class?

How about an analogy: when I was in the Air Force, I went to pilot training and became a USAF (US Air Force) pilot. At that point I wasn't qualified to fly anything, and had to attend aircraft type training. Once I qualified, I was a pilot (Abstract class) and a C-141 pilot (concrete class). At one of my assignments, I was given an additional duty: Safety Officer. Now I was still a pilot and a C-141 pilot, but I also performed Safety Officer duties (I implemented ISafetyOfficer, so to speak). A pilot wasn't required to be a safety officer, other people could have done it as well.
All USAF pilots have to follow certain Air Force-wide regulations, and all C-141 (or F-16, or T-38) pilots 'are' USAF pilots. Anyone can be a safety officer. So, to summarize:
Pilot: abstract class
C-141 Pilot: concrete class
ISafety Officer: interface
added note: this was meant to be an analogy to help explain the concept, not a coding recommendation. See the various comments below, the discussion is interesting.

While your question indicates it's for "general OO", it really seems to be focusing on .NET use of these terms.
In .NET (similar for Java):
interfaces can have no state or implementation
a class that implements an interface must provide an implementation of all the methods of that interface
abstract classes may contain state (data members) and/or implementation (methods)
abstract classes can be inherited without implementing the abstract methods (though such a derived class is abstract itself)
interfaces may be multiple-inherited, abstract classes may not (this is probably the key concrete reason for interfaces to exist separately from abtract classes - they permit an implementation of multiple inheritance that removes many of the problems of general MI).
As general OO terms, the differences are not necessarily well-defined. For example, there are C++ programmers who may hold similar rigid definitions (interfaces are a strict subset of abstract classes that cannot contain implementation), while some may say that an abstract class with some default implementations is still an interface or that a non-abstract class can still define an interface.
Indeed, there is a C++ idiom called the Non-Virtual Interface (NVI) where the public methods are non-virtual methods that 'thunk' to private virtual methods:
http://www.gotw.ca/publications/mill18.htm
http://en.wikibooks.org/wiki/More_C%2B%2B_Idioms/Non-Virtual_Interface

I think the answer they are looking for is the fundamental or OPPS philosophical difference.
The abstract class inheritance is used when the derived class shares the core properties and behaviour of the abstract class. The kind of behaviour that actually defines the class.
On the other hand interface inheritance is used when the classes share peripheral behaviour, ones which do not necessarily define the derived class.
For eg. A Car and a Truck share a lot of core properties and behaviour of an Automobile abstract class, but they also share some peripheral behaviour like Generate exhaust which even non automobile classes like Drillers or PowerGenerators share and doesn't necessarily defines a Car or a Truck, so Car, Truck, Driller and PowerGenerator can all share the same interface IExhaust.

Short: Abstract classes are used for Modelling a class hierarchy of similar looking classes (For example Animal can be abstract class and Human , Lion, Tiger can be concrete derived classes)
AND
Interface is used for Communication between 2 similar / non similar classes which does not care about type of the class implementing Interface(e.g. Height can be interface property and it can be implemented by Human , Building , Tree. It does not matter if you can eat , you can swim you can die or anything.. it matters only a thing that you need to have Height (implementation in you class) ).

There are a couple of other differences -
Interfaces can't have any concrete implementations. Abstract base classes can. This allows you to provide concrete implementations there. This can allow an abstract base class to actually provide a more rigorous contract, wheras an interface really only describes how a class is used. (The abstract base class can have non-virtual members defining the behavior, which gives more control to the base class author.)
More than one interface can be implemented on a class. A class can only derive from a single abstract base class. This allows for polymorphic hierarchy using interfaces, but not abstract base classes. This also allows for a pseudo-multi-inheritance using interfaces.
Abstract base classes can be modified in v2+ without breaking the API. Changes to interfaces are breaking changes.
[C#/.NET Specific] Interfaces, unlike abstract base classes, can be applied to value types (structs). Structs cannot inherit from abstract base classes. This allows behavioral contracts/usage guidelines to be applied on value types.

Inheritance
Consider a car and a bus. They are two different vehicles. But still, they share some common properties like they have a steering, brakes, gears, engine etc.
So with the inheritance concept, this can be represented as following ...
public class Vehicle {
private Driver driver;
private Seat[] seatArray; //In java and most of the Object Oriented Programming(OOP) languages, square brackets are used to denote arrays(Collections).
//You can define as many properties as you want here ...
}
Now a Bicycle ...
public class Bicycle extends Vehicle {
//You define properties which are unique to bicycles here ...
private Pedal pedal;
}
And a Car ...
public class Car extends Vehicle {
private Engine engine;
private Door[] doors;
}
That's all about Inheritance. We use them to classify objects into simpler Base forms and their children as we saw above.
Abstract Classes
Abstract classes are incomplete objects. To understand it further, let's consider the vehicle analogy once again.
A vehicle can be driven. Right? But different vehicles are driven in different ways ... For example, You cannot drive a car just as you drive a Bicycle.
So how to represent the drive function of a vehicle? It is harder to check what type of vehicle it is and drive it with its own function; you would have to change the Driver class again and again when adding a new type of vehicle.
Here comes the role of abstract classes and methods. You can define the drive method as abstract to tell that every inheriting children must implement this function.
So if you modify the vehicle class ...
//......Code of Vehicle Class
abstract public void drive();
//.....Code continues
The Bicycle and Car must also specify how to drive it. Otherwise, the code won't compile and an error is thrown.
In short.. an abstract class is a partially incomplete class with some incomplete functions, which the inheriting children must specify their own.
Interfaces
Interfaces are totally incomplete. They do not have any properties. They just indicate that the inheriting children are capable of doing something ...
Suppose you have different types of mobile phones with you. Each of them has different ways to do different functions; Ex: call a person. The maker of the phone specifies how to do it. Here the mobile phones can dial a number - that is, it is dial-able. Let's represent this as an interface.
public interface Dialable {
public void dial(Number n);
}
Here the maker of the Dialable defines how to dial a number. You just need to give it a number to dial.
// Makers define how exactly dialable work inside.
Dialable PHONE1 = new Dialable() {
public void dial(Number n) {
//Do the phone1's own way to dial a number
}
}
Dialable PHONE2 = new Dialable() {
public void dial(Number n) {
//Do the phone2's own way to dial a number
}
}
//Suppose there is a function written by someone else, which expects a Dialable
......
public static void main(String[] args) {
Dialable myDialable = SomeLibrary.PHONE1;
SomeOtherLibrary.doSomethingUsingADialable(myDialable);
}
.....
Hereby using interfaces instead of abstract classes, the writer of the function which uses a Dialable need not worry about its properties. Ex: Does it have a touch-screen or dial pad, Is it a fixed landline phone or mobile phone. You just need to know if it is dialable; does it inherit(or implement) the Dialable interface.
And more importantly, if someday you switch the Dialable with a different one
......
public static void main(String[] args) {
Dialable myDialable = SomeLibrary.PHONE2; // <-- changed from PHONE1 to PHONE2
SomeOtherLibrary.doSomethingUsingADialable(myDialable);
}
.....
You can be sure that the code still works perfectly because the function which uses the dialable does not (and cannot) depend on the details other than those specified in the Dialable interface. They both implement a Dialable interface and that's the only thing the function cares about.
Interfaces are commonly used by developers to ensure interoperability(use interchangeably) between objects, as far as they share a common function (just like you may change to a landline or mobile phone, as far as you just need to dial a number). In short, interfaces are a much simpler version of abstract classes, without any properties.
Also, note that you may implement(inherit) as many interfaces as you want but you may only extend(inherit) a single parent class.
More Info
Abstract classes vs Interfaces

If you consider java as OOP language to answer this question, Java 8 release causes some of the content in above answers as obsolete. Now java interface can have default methods with concrete implementation.
Oracle website provides key differences between interface and abstract class.
Consider using abstract classes if :
You want to share code among several closely related classes.
You expect that classes that extend your abstract class have many common methods or fields, or require access modifiers other than public (such as protected and private).
You want to declare non-static or non-final fields.
Consider using interfaces if :
You expect that unrelated classes would implement your interface. For example,many unrelated objects can implement Serializable interface.
You want to specify the behaviour of a particular data type, but not concerned about who implements its behaviour.
You want to take advantage of multiple inheritance of type.
In simple terms, I would like to use
interface: To implement a contract by multiple unrelated objects
abstract class: To implement the same or different behaviour among multiple related objects
Have a look at code example to understand things in clear way : How should I have explained the difference between an Interface and an Abstract class?

The interviewers are barking up an odd tree. For languages like C# and Java, there is a difference, but in other languages like C++ there is not. OO theory doesn't differentiate the two, merely the syntax of language.
An abstract class is a class with both implementation and interface (pure virtual methods) that will be inherited. Interfaces generally do not have any implementation but only pure virtual functions.
In C# or Java an abstract class without any implementation differs from an interface only in the syntax used to inherit from it and the fact you can only inherit from one.

By implementing interfaces you are achieving composition ("has-a" relationships) instead of inheritance ("is-a" relationships). That is an important principle to remember when it comes to things like design patterns where you need to use interfaces to achieve a composition of behaviors instead of an inheritance.

These answers are all too long.
Interfaces are for defining behaviors.
Abstract classes are for defining a thing itself, including its behaviors. That's why we sometimes create an abstract class with some extra properties inheriting an interface.
This also explains why Java only supports single inheritance for classes but puts no restriction on interfaces. Because a concrete object can not be different things, but it can have different behaviors.

Conceptually speaking, keeping the language specific implementation, rules, benefits and achieving any programming goal by using anyone or both, can or cant have code/data/property, blah blah, single or multiple inheritances, all aside
1- Abstract (or pure abstract) Class is meant to implement hierarchy. If your business objects look somewhat structurally similar, representing a parent-child (hierarchy) kind of relationship only then inheritance/Abstract classes will be used. If your business model does not have a hierarchy then inheritance should not be used (here I am not talking about programming logic e.g. some design patterns require inheritance). Conceptually, abstract class is a method to implement hierarchy of a business model in OOP, it has nothing to do with Interfaces, actually comparing Abstract class with Interface is meaningless because both are conceptually totally different things, it is asked in interviews just to check the concepts because it looks both provide somewhat same functionality when implementation is concerned and we programmers usually emphasize more on coding. [Keep this in mind as well that Abstraction is different than Abstract Class].
2- an Interface is a contract, a complete business functionality represented by one or more set of functions. That is why it is implemented and not inherited. A business object (part of a hierarchy or not) can have any number of complete business functionality. It has nothing to do with abstract classes means inheritance in general. For example, a human can RUN, an elephant can RUN, a bird can RUN, and so on, all these objects of different hierarchy would implement the RUN interface or EAT or SPEAK interface. Don't go into implementation as you might implement it as having abstract classes for each type implementing these interfaces. An object of any hierarchy can have a functionality(interface) which has nothing to do with its hierarchy.
I believe, Interfaces were not invented to achieve multiple inheritances or to expose public behavior, and similarly, pure abstract classes are not to overrule interfaces but Interface is a functionality that an object can do (via functions of that interface) and Abstract Class represents a parent of a hierarchy to produce children having core structure (property+functionality) of the parent
When you are asked about the difference, it is actually conceptual difference not the difference in language-specific implementation unless asked explicitly.
I believe, both interviewers were expecting one line straightforward difference between these two and when you failed they tried to drove you towards this difference by implementing ONE as the OTHER
What if you had an Abstract class with only abstract methods?

i will explain Depth Details of interface and Abstract class.if you know overview about interface and abstract class, then first question arrive in your mind when we should use Interface and when we should use Abstract class.
So please check below explanation of Interface and Abstract class.
When we should use Interface?
if you don't know about implementation just we have requirement specification then we go with Interface
When we should use Abstract Class?
if you know implementation but not completely (partially implementation) then we go with Abstract class.
Interface
every method by default public abstract means interface is 100% pure abstract.
Abstract
can have Concrete method and Abstract method, what is Concrete method, which have implementation in Abstract class,
An abstract class is a class that is declared abstract—it may or may not include abstract methods.
Interface
We cannot declared interface as a private, protected
Q. Why we are not declaring Interface a private and protected?
Because by default interface method is public abstract so and so that reason that we are not declaring the interface as private and protected.
Interface method
also we cannot declared interface as private,protected,final,static,synchronized,native.....
i will give the reason:
why we are not declaring synchronized method because we cannot create object of interface and synchronize are work on object so and son reason that we are not declaring the synchronized method
Transient concept are also not applicable because transient work with synchronized.
Abstract
we are happily use with public,private final static.... means no restriction are applicable in abstract.
Interface
Variables are declared in Interface as a by default public static final so we are also not declared variable as a private, protected.
Volatile modifier is also not applicable in interface because interface variable is by default public static final and final variable you cannot change the value once it assign the value into variable and once you declared variable into interface you must to assign the variable.
And volatile variable is keep on changes so it is opp. to final that is reason we are not use volatile variable in interface.
Abstract
Abstract variable no need to declared public static final.
i hope this article is useful.

For .Net,
Your answer to The second interviewer is also the answer to the first one... Abstract classes can have implementation, AND state, interfaces cannot...
EDIT: On another note, I wouldn't even use the phrase 'subclass' (or the 'inheritance' phrase) to describe classes that are 'defined to implement' an interface. To me, an interface is a definition of a contract that a class must conform to if it has been defined to 'implement' that interface. It does not inherit anything... You have to add everything yourself, explicitly.

Interface : should be used if you want to imply a rule on the components which may or may not be
related to each other
Pros:
Allows multiple inheritance
Provides abstraction by not exposing what exact kind of object is being used in the context
provides consistency by a specific signature of the contract
Cons:
Must implement all the contracts defined
Cannot have variables or delegates
Once defined cannot be changed without breaking all the classes
Abstract Class : should be used where you want to have some basic or default behaviour or implementation for components related to each other
Pros:
Faster than interface
Has flexibility in the implementation (you can implement it fully or partially)
Can be easily changed without breaking the derived classes
Cons:
Cannot be instantiated
Does not support multiple inheritance

I think they didn't like your response because you gave the technical differences instead of design ones. The question is like a troll question for me. In fact, interfaces and abstract classes have a completely different nature so you cannot really compare them. I will give you my vision of what is the role of an interface and what is the role of an abstract class.
interface: is used to ensure a contract and make a low coupling between classes in order to have a more maintainable, scalable and testable application.
abstract class: is only used to factorize some code between classes of the same responsability. Note that this is the main reason why multiple-inheritance is a bad thing in OOP, because a class shouldn't handle many responsabilities (use composition instead).
So interfaces have a real architectural role whereas abstract classes are almost only a detail of implementation (if you use it correctly of course).

Interface:
We do not implement (or define) methods, we do that in derived classes.
We do not declare member variables in interfaces.
Interfaces express the HAS-A relationship. That means they are a mask of objects.
Abstract class:
We can declare and define methods in abstract class.
We hide constructors of it. That means there is no object created from it directly.
Abstract class can hold member variables.
Derived classes inherit to abstract class that mean objects from derived classes are not masked, it inherit to abstract class. The relationship in this case is IS-A.
This is my opinion.

After all that, the interviewer came up with the question "What if you had an
Abstract class with only abstract methods? How would that be different
from an interface?"
Docs clearly say that if an abstract class contains only abstract method declarations, it should be declared as an interface instead.
An another interviewer asked me what if you had a Public variable inside
the interface, how would that be different than in Abstract Class?
Variables in Interfaces are by default public static and final. Question could be framed like what if all variables in abstract class are public? Well they can still be non static and non final unlike the variables in interfaces.
Finally I would add one more point to those mentioned above - abstract classes are still classes and fall in a single inheritance tree whereas interfaces can be present in multiple inheritance.

tl;dr; When you see “Is A” relationship use inheritance/abstract class. when you see “has a” relationship create member variables. When you see “relies on external provider” implement (not inherit) an interface.
Interview Question: What is the difference between an interface and an abstract class? And how do you decide when to use what? I mostly get one or all of the below answers: Answer 1: You cannot create an object of abstract class and interfaces.
ZK (That’s my initials): You cannot create an object of either. So this is not a difference. This is a similarity between an interface and an abstract class. Counter Question: Why can’t you create an object of abstract class or interface?
Answer 2: Abstract classes can have a function body as partial/default implementation.
ZK: Counter Question: So if I change it to a pure abstract class, marking all the virtual functions as abstract and provide no default implementation for any virtual function. Would that make abstract classes and interfaces the same? And could they be used interchangeably after that?
Answer 3: Interfaces allow multi-inheritance and abstract classes don’t.
ZK: Counter Question: Do you really inherit from an interface? or do you just implement an interface and, inherit from an abstract class? What’s the difference between implementing and inheriting? These counter questions throw candidates off and make most scratch their heads or just pass to the next question. That makes me think people need help with these basic building blocks of Object-Oriented Programming. The answer to the original question and all the counter questions is found in the English language and the UML. You must know at least below to understand these two constructs better.
Common Noun: A common noun is a name given “in common” to things of the same class or kind. For e.g. fruits, animals, city, car etc.
Proper Noun: A proper noun is the name of an object, place or thing. Apple, Cat, New York, Honda Accord etc.
Car is a Common Noun. And Honda Accord is a Proper Noun, and probably a Composit Proper noun, a proper noun made using two nouns.
Coming to the UML Part. You should be familiar with below relationships:
Is A
Has A
Uses
Let’s consider the below two sentences. - HondaAccord Is A Car? - HondaAccord Has A Car?
Which one sounds correct? Plain English and comprehension. HondaAccord and Cars share an “Is A” relationship. Honda accord doesn’t have a car in it. It “is a” car. Honda Accord “has a” music player in it.
When two entities share the “Is A” relationship it’s a better candidate for inheritance. And Has a relationship is a better candidate for creating member variables. With this established our code looks like this:
abstract class Car
{
string color;
int speed;
}
class HondaAccord : Car
{
MusicPlayer musicPlayer;
}
Now Honda doesn't manufacture music players. Or at least it’s not their main business.
So they reach out to other companies and sign a contract. If you receive power here and the output signal on these two wires it’ll play just fine on these speakers.
This makes Music Player a perfect candidate for an interface. You don’t care who provides support for it as long as the connections work just fine.
You can replace the MusicPlayer of LG with Sony or the other way. And it won’t change a thing in Honda Accord.
Why can’t you create an object of abstract classes?
Because you can’t walk into a showroom and say give me a car. You’ll have to provide a proper noun. What car? Probably a honda accord. And that’s when a sales agent could get you something.
Why can’t you create an object of an interface? Because you can’t walk into a showroom and say give me a contract of music player. It won’t help. Interfaces sit between consumers and providers just to facilitate an agreement. What will you do with a copy of the agreement? It won’t play music.
Why do interfaces allow multiple inheritance?
Interfaces are not inherited. Interfaces are implemented. The interface is a candidate for interaction with the external world. Honda Accord has an interface for refueling. It has interfaces for inflating tires. And the same hose that is used to inflate a football. So the new code will look like below:
abstract class Car
{
string color;
int speed;
}
class HondaAccord : Car, IInflateAir, IRefueling
{
MusicPlayer musicPlayer;
}
And the English will read like this “Honda Accord is a Car that supports inflating tire and refueling”.

An interface defines a contract for a service or set of services. They provide polymorphism in a horizontal manner in that two completely unrelated classes can implement the same interface but be used interchangeably as a parameter of the type of interface they implement, as both classes have promised to satisfy the set of services defined by the interface. Interfaces provide no implementation details.
An abstract class defines a base structure for its sublcasses, and optionally partial implementation. Abstract classes provide polymorphism in a vertical, but directional manner, in that any class that inherits the abstract class can be treated as an instance of that abstract class but not the other way around. Abstract classes can and often do contain implementation details, but cannot be instantiated on their own- only their subclasses can be "newed up".
C# does allow for interface inheritance as well, mind you.

Most answers focus on the technical difference between Abstract Class and Interface, but since technically, an interface is basically a kind of abstract class (one without any data or implementation), I think the conceptual difference is far more interesting, and that might be what the interviewers are after.
An Interface is an agreement. It specifies: "this is how we're going to talk to each other". It can't have any implementation because it's not supposed to have any implementation. It's a contract. It's like the .h header files in C.
An Abstract Class is an incomplete implementation. A class may or may not implement an interface, and an abstract class doesn't have to implement it completely. An abstract class without any implementation is kind of useless, but totally legal.
Basically any class, abstract or not, is about what it is, whereas an interface is about how you use it. For example: Animal might be an abstract class implementing some basic metabolic functions, and specifying abstract methods for breathing and locomotion without giving an implementation, because it has no idea whether it should breathe through gills or lungs, and whether it flies, swims, walks or crawls. Mount, on the other hand, might be an Interface, which specifies that you can ride the animal, without knowing what kind of animal it is (or whether it's an animal at all!).
The fact that behind the scenes, an interface is basically an abstract class with only abstract methods, doesn't matter. Conceptually, they fill totally different roles.

Interfaces are light weight way to enforce a particular behavior. That is one way to think of.

As you might have got the theoretical knowledge from the experts, I am not spending much words in repeating all those here, rather let me explain with a simple example where we can use/cannot use Interface and Abstract class.
Consider you are designing an application to list all the features of Cars. In various points you need inheritance in common, as some of the properties like DigitalFuelMeter, Air Conditioning, Seat adjustment, etc are common for all the cars. Likewise, we need inheritance for some classes only as some of the properties like the Braking system (ABS,EBD) are applicable only for some cars.
The below class acts as a base class for all the cars:
public class Cars
{
public string DigitalFuelMeter()
{
return "I have DigitalFuelMeter";
}
public string AirCondition()
{
return "I have AC";
}
public string SeatAdjust()
{
return "I can Adjust seat";
}
}
Consider we have a separate class for each Cars.
public class Alto : Cars
{
// Have all the features of Car class
}
public class Verna : Cars
{
// Have all the features of Car class + Car need to inherit ABS as the Braking technology feature which is not in Cars
}
public class Cruze : Cars
{
// Have all the features of Car class + Car need to inherit EBD as the Braking technology feature which is not in Cars
}
Consider we need a method for inheriting the Braking technology for the cars Verna and Cruze (not applicable for Alto). Though both uses braking technology, the "technology" is different. So we are creating an abstract class in which the method will be declared as Abstract and it should be implemented in its child classes.
public abstract class Brake
{
public abstract string GetBrakeTechnology();
}
Now we are trying to inherit from this abstract class and the type of braking system is implemented in Verna and Cruze:
public class Verna : Cars,Brake
{
public override string GetBrakeTechnology()
{
return "I use ABS system for braking";
}
}
public class Cruze : Cars,Brake
{
public override string GetBrakeTechnology()
{
return "I use EBD system for braking";
}
}
See the problem in the above two classes? They inherit from multiple classes which C#.Net doesn't allow even though the method is implemented in the children. Here it comes the need of Interface.
interface IBrakeTechnology
{
string GetBrakeTechnology();
}
And the implementation is given below:
public class Verna : Cars, IBrakeTechnology
{
public string GetBrakeTechnology()
{
return "I use ABS system for braking";
}
}
public class Cruze : Cars, IBrakeTechnology
{
public string GetBrakeTechnology()
{
return "I use EBD system for braking";
}
}
Now Verna and Cruze can achieve multiple inheritance with its own kind of braking technologies with the help of Interface.

1) An interface can be seen as a pure Abstract Class, is the same, but despite this, is not the same to implement an interface and inheriting from an abstract class. When you inherit from this pure abstract class you are defining a hierarchy -> inheritance, if you implement the interface you are not, and you can implement as many interfaces as you want, but you can only inherit from one class.
2) You can define a property in an interface, so the class that implements that interface must have that property.
For example:
public interface IVariable
{
string name {get; set;}
}
The class that implements that interface must have a property like that.

Though this question is quite old, I would like to add one other point in favor of interfaces:
Interfaces can be injected using any Dependency Injection tools where as Abstract class injection supported by very few.

From another answer of mine, mostly dealing with when to use one versus the other:
In my experience, interfaces are best
used when you have several classes
which each need to respond to the same
method or methods so that they can be
used interchangeably by other code
which will be written against those
classes' common interface. The best
use of an interface is when the
protocol is important but the
underlying logic may be different for
each class. If you would otherwise be
duplicating logic, consider abstract
classes or standard class inheritance
instead.

Interface Types vs. Abstract Base Classes
Adapted from the Pro C# 5.0 and the .NET 4.5 Framework book.
The interface type might seem very similar to an abstract base class. Recall
that when a class is marked as abstract, it may define any number of abstract members to provide a
polymorphic interface to all derived types. However, even when a class does define a set of abstract
members, it is also free to define any number of constructors, field data, nonabstract members (with
implementation), and so on. Interfaces, on the other hand, contain only abstract member definitions.
The polymorphic interface established by an abstract parent class suffers from one major limitation
in that only derived types support the members defined by the abstract parent. However, in larger
software systems, it is very common to develop multiple class hierarchies that have no common parent
beyond System.Object. Given that abstract members in an abstract base class apply only to derived
types, we have no way to configure types in different hierarchies to support the same polymorphic
interface. By way of example, assume you have defined the following abstract class:
public abstract class CloneableType
{
// Only derived types can support this
// "polymorphic interface." Classes in other
// hierarchies have no access to this abstract
// member.
public abstract object Clone();
}
Given this definition, only members that extend CloneableType are able to support the Clone()
method. If you create a new set of classes that do not extend this base class, you can’t gain this
polymorphic interface. Also, you might recall that C# does not support multiple inheritance for classes.
Therefore, if you wanted to create a MiniVan that is-a Car and is-a CloneableType, you are unable to do so:
// Nope! Multiple inheritance is not possible in C#
// for classes.
public class MiniVan : Car, CloneableType
{
}
As you would guess, interface types come to the rescue. After an interface has been defined, it can
be implemented by any class or structure, in any hierarchy, within any namespace or any assembly
(written in any .NET programming language). As you can see, interfaces are highly polymorphic.
Consider the standard .NET interface named ICloneable, defined in the System namespace. This
interface defines a single method named Clone():
public interface ICloneable
{
object Clone();
}

Answer to the second question : public variable defined in interface is static final by default while the public variable in abstract class is an instance variable.

From Coding Perspective
An Interface can replace an Abstract Class if the Abstract Class has only abstract methods. Otherwise changing Abstract class to interface means that you will be losing out on code re-usability which Inheritance provides.
From Design Perspective
Keep it as an Abstract Class if it's an "Is a" relationship and you need a subset or all of the functionality. Keep it as Interface if it's a "Should Do" relationship.
Decide what you need: just the policy enforcement, or code re-usability AND policy.

For sure it is important to understand the behavior of interface and abstract class in OOP (and how languages handle them), but I think it is also important to understand what exactly each term means. Can you imagine the if command not working exactly as the meaning of the term? Also, actually some languages are reducing, even more, the differences between an interface and an abstract... if by chance one day the two terms operate almost identically, at least you can define yourself where (and why) should any of them be used for.
If you read through some dictionaries and other fonts you may find different meanings for the same term but having some common definitions. I think these two meanings I found in this site are really, really good and suitable.
Interface:
A thing or circumstance that enables separate and sometimes incompatible elements to coordinate effectively.
Abstract:
Something that concentrates in itself the essential qualities of anything more extensive or more general, or of several things; essence.
Example:
You bought a car and it needs fuel.
Your car model is XYZ, which is of genre ABC, so it is a concrete car, a specific instance of a car. A car is not a real object. In fact, it is an abstract set of standards (qualities) to create a specific object. In short, Car is an abstract class, it is "something that concentrates in itself the essential qualities of anything more extensive or more general".
The only fuel that matches the car manual specification should be used to fill up the car tank. In reality, there is nothing to restrict you to put any fuel but the engine will work properly only with the specified fuel, so it is better to follow its requirements. The requirements say that it accepts, as other cars of the same genre ABC, a standard set of fuel.
In an Object Oriented view, fuel for genre ABC should not be declared as a class because there is no concrete fuel for a specific genre of car out there. Although your car could accept an abstract class Fuel or VehicularFuel, you must remember that your only some of the existing vehicular fuel meet the specification, those that implement the requirements in your car manual. In short, they should implement the interface ABCGenreFuel, which "... enables separate and sometimes incompatible elements to coordinate effectively".
Addendum
In addition, I think you should keep in mind the meaning of the term class, which is (from the same site previously mentioned):
Class:
A number of persons or things regarded as forming a group by reason of common attributes, characteristics, qualities, or traits; kind;
This way, a class (or abstract class) should not represent only common attributes (like an interface), but some kind of group with common attributes. An interface doesn't need to represent a kind. It must represent common attributes. This way, I think classes and abstract classes may be used to represent things that should not change its aspects often, like a human being a Mammal, because it represents some kinds. Kinds should not change themselves that often.

instantiating an abstract class in JAVA?

I am learning JAVA and following the book JAVA:The Complete Reference by Herbert Shildt.
I learned about abstract classes in Java, but could not understand reason behind this line:
An abstract class cannot be directly instantiated with new operator.
I searched over web and stackoverflow and followed these questions: Why can't we instantiate a abstract class in JAVA? and Why can't we instantiate an interface or an abstract class in java without an anonymous class method?
In one answer, someone wrote as:
Simply, in a good object oriented program, you should never want to
instantiate an abstract class or interface. If you do, the design is
probably wrong.
I do not understand why it is important not to instantiate an abstract class for good OOP design. If someone can give a good explanation, then please help.

An abstract class should be something that doesn't make sense if it exists completely on its own.
Take a Vehicle for example. Can you describe a Vehicle without describing a specific type of Vehicle at the same time? No - because Vehicle is just a way of describing common features and behaviours of a group of related objects. Alternatively, you could think of them as concepts.
Your quote:
Simply, in a good object oriented program, you should never want to instantiate an abstract class or interface. If you do, the design is probably wrong.
Is spot on. If you've written an abstract class that you want to instantiate completely on its own, then it isn't an abstract class. If you ever find yourself in this situation, you probably need to carry out another level of abstraction to separate out the abstract parts from the bits that actually start to condense the class into something concrete. The only thing you should want to do with an abstract class is to extend it - to turn it into something less vague (or more concrete if you prefer).
Of course, Java can seem a little contradictory at times. In fact, writing a constructor for an abstract class is perfectly valid:
abstract class Vehicle {
// You might have some common variables defined here
Vehicle() { }
}
At first this seems a little stupid. Why can I write a constructor, which is designed to allow you to instantiate an object, when I'm not allowed to instantiate the class? The compiler will even create a default constructor for you if you don't write one!
The answer there is that you are allowed to instantiate an abstract class - you're just not allowed to instantiate it directly using the new keyword. But the most important part of abstract classes is that they're designed to be extended.
When you instantiate a subclass of an abstract class, you either explicitly or implicitly call super(); inside the constructor:
public class Car extends Vehicle {
public Car() {
super(); // If you don't put this here, the compiler will!
}
}
This actually makes sense when you think about it - you can't have a Vehicle on it's own, but my car that's sat in the car park is definitely a Vehicle. Once I have a concrete extension to my concept of a Vehicle, Car in this case, then I can have a Vehicle.
Probably the most useful thing that this enables you to do is create generic collections. Because Vehicle is the superclass of all of the different types of Vehicle, I can say:
List<Vehicle> vehicles = new ArrayList<>();
Or if you prefer not to/can't use the diamond operator (<>):
List<Vehicle> vehicles = new ArrayList<Vehicle>();
This allows me to put any type of Vehicle into that collection:
vehicles.add(new Car());
vehicles.add(new Van());
vehicles.add(new Lorry());
vehicles.add(new Motorcycle());
// and so on...
Although there are many other advantages to this, too numerous to cover in this answer.

You can't instantiate an abstract class, bacause it usually contains abstract methods, which have no implementation. In order to instantiate a class, all of its methods must be implemented. Sub classes would implement the abstract methods, and you would instantiate those sub classes.
However, even if you implement all the methods, you would sometimes define the class as abstract if you want to prevent users of the class from instantiating it. You would define a class as abstract if it is meant to be sub-classed, and doesn't contain all that is required for creating a fully functional object.
As for interfaces, they just declare methods without implementation (with the exception of default methods introduced in Java8), and don't have constructors or class variables. You can't instantiate them without implementing all of their methods.

Well, let's take an example so that you can understand why in object oriented paradigm the abstract classes are not for instantiation, but for extending :
Suppose that we want to design a Zoo Application , where we present each animal by a set of information, but each type would be presented by it's class, if we want to follow a good practice, then we create a class called Animal where we put commons information about all animal ( id, price, entryDate...).
public abstract class Animal {
private long id;
private Date entryDate;
private double price;
private String name;
// other common info
}
This would help designing other classes from a structural point of view
public Lion extend Animal {
private boolean isFromAfrica;
}

Abstract classes are meant to provide a skeleton structure so there is no concrete implementation in them.
The child classes are expected to fill in the implementation and hence they can be instantiated.

Yout answer is in your given statement:
Simply, in a good object oriented program, you should never want to instantiate an abstract class or interface. If you do, the design is probably wrong.
You should never want to instantiate an abstract class.Because abstract class is an uncomplete class whose intstantiation does not make any sense.You define a behavior for classes which will extend your abstact class. It's more about a guy saying "these classes should look like that, and they got that in common, so fill in the blanks!".
Abstract classes are useful when you need a class for the purpose of
inheritance and polymorphism, but it makes no sense to instantiate the
class itself, only its subclasses. They are commonly used when you
want to define a template for a group of subclasses that share some
common implementation code, but you also want to guarantee that the
objects of the superclass cannot be created.
So it is to important to do not instantiate an abstract class as according to right design, purpose of abstract class is different,you use it when used when you want to define a template for a group of subclasses and it makes no sense to instantiate the class itself,
For example: let's say you need to create Dog, Cat, Hamster and Fish objects. They possess similar properties like color, size, and number of legs as well as behavior so you create an Animal superclass. However, what color is an Animal? How many legs does an Animal object have? In this case, it doesn't make much sense to instantiate an object of type Animal but rather only its subclasses.

it may seem baffling at first , but you will get used to it
well technically it can't be instantiated because -
it does not contain method definitions.so y waste space on its instantiation!
theoretically-
it defeats the entire purpose of abstract class if u can instantiate it..y go thru all the trouble of creating the concept when it is no different than the ordinary class

Abstract classes sole purpose is to be extended. The abstract class will contain common code for all its subclasses and the subclasses will only implement those sections that is relevant to it.
Abstract classes are quite useful for the Command pattern. For example, let's say you have a task that needs to execute a set of actions, then you can define a Command abstract class:
public abstract class Command
public void doCommand() {
// Actual code here doing stuff...
runInternal();
// more code;
}
public abstract void runInternal();
}
The idea now is that you can implement a whole range of commands, for example:
public void RedCommand extends Command {
public void runInternal() {
// Real code that does red things
}
}
...and also
public void BlueCommand extends Command {
public void runInternal() {
// Real code that does blue things
}
}
Now, you can have something like this:
List<Command> list = new ArrayList<>();
list.add(new RedCommand())
list.add(new RedCommand())
list.add(new BlueCommand())
for(Command c : list) {
c.doCommand();
}
Now it's easy to add more commands later, by simply extending the Command abstract class and implementing the runInternal() method. As with all things, this pattern can/is heavily abused, but in the right environment is makes for easy/readable code.

The reason is that sometimes several concrete classes (classes that can be instantiated) all share common functionality. The common functionality can be shared through inheritance. The common methods are put in the abstract classes. The concrete subclasses can use those methods as they are defined in the abstract class, or concrete subclasses can override the methods to implement special behavior.
As analogy, think of these four things: animal, mammal, human, elephant. There are real creatures called "human" and "elephant", but there are no creatures named "animal" or "mammal". Human and elephants are concrete that way. Animals and mammals are abstractions we created to describe traits common to different creatures. Humans and elephants are kinds of mammals. Mammals are kinds of animals.
In the OO world, we could model these four things as classes. Class Mammal is an abstract class that extends the abstract class Animal. Human and Elephant are concrete classes that extend Mammal. Declaring classes Animal and Mammal as abstract tells others that there is no such thing as an "animal" or "mammal" running around in the woods. Animal and mammal are just ideas we invented to describe things that humans, elephants, and other creatures have in common.

what is the advantage of interface over abstract classes?

In Java, abstract classes give the ability to define both concrete and abstract methods whereas interfaces only give the ability to implement abstract methods.
I believe overriding methods in subclasses/implementations is possible in both cases, therefore, what is the real advantage of one over the other (interfaces vs abstract classes in Java)?

Interfaces are for when you want to say "I don't care how you do it, but here's what you need to get done."
Abstract classes are for when you want to say "I know what you should do, and I know how you should do it in some/many of the cases."
Abstract classes have some serious drawbacks. For example:
class House {
}
class Boat {
}
class HouseBoat extends /* Uh oh!! */ {
// don't get me started on Farmer's Insurance "Autoboathome" which is also a helicopter
}
You can get through via an interface:
interface Liveable {
}
interface Floatable {
}
class HouseBoat implements Liveable, Floatable {
}
Now, abstract classes are also very useful. For example, consider the AbstractCollection class. It defines the default behavior for very common methods to all Collections, like isEmpty() and contains(Object). You can override these behaviors if you want to, but... is the behavior for determining if a collection is empty really likely to change? Typically it's going to be size == 0. (But it can make a big difference! Sometimes size is expensive to calculate, but determining whether something is empty or not is as easy as looking at the first element.)
And since it won't change often, is it really worth the developer's time to implement that method every... single... time... for every method in that "solved" category? Not to mention when you need to make a change to it, you're going to have code duplication and missed bugs if you had to re-implement it everywhere.

Interfaces are useful because Java doesn't have multiple inheritance (but you can implement as many interfaces as you like).
Abstract classes are useful when you need concrete behaviour from the base class.

The facts are-
Java doesn't support multiple inheritance
Multiple interfaces can be implemented
Few methods in an abstract class may be implemented
These facts can be used to tilt the advantage in favor of interfaces or abstract classes.
If there are more than one behavior that a class must share with other classes, interfaces win.
If a method definition has to be shared/ overridden with other classes, abstract classes win.

An class may implement several interfaces, whereas it may only extend one class (abstract or concrete), because Java does not support multiple inheritance.

In OOP (mostly independent of a concrete language) abstract classes are a re-use mechanism for the class hierarchy for behaviour and structure which isn't complete on its own.
Interfaces are mechanism for specification of requirements on a module (e.g. class) independently of the concrete implementation.
All other differences are technical details, important is different usage.

You dont override an interface. You implement it.
Writing an interface gives implementors the ability to implement your interface and also other interfaces in addition to inheriting from a base class.
Abstract classes can be partially or fully implemented.Marking a class abstract just prevents you from instantiating an object of that type.

-Method without any implementation is abstract method,whenever a class contains one or more abstract method,then it must be declared as a abstract class
-Interface is fully abstract which cannot have constructor,instance and static blocks,and it contains only two types of members
1.public abstract method
2.public-static-final variable
*Both cannot be instantiated but reference can be created.
*Which one suits better depends on the application
-Interfaces are useful because Java classes will not support multiple inheritance but interfaces do.
-Abstract classes are useful when you need concrete behavior from the base class.

The main advantages of interface over abstract class is to overcome the occurrence of diamond
problem and achieve multiple inheritance.
In java there is no solution provided for diamond problem using classes.For this reason multiple inheritance is block using classes in java.
So to achieve multiple inheritance we use interface .

class Animal
{ void move(){} }
class Bird
{ void move(){fly} }
class Fish
{ void move(){swim} }
Now, if class Animal is abstract class like
Animal a;
a= new Bird(); or a = new Fish()
Here, abstraction works well, but if there are 100 objects like Animal a[100];
You can not write new Bird().move or new Fish().move 100 times
Use interface and write a[i].move. It will differentiate as bird or fish and that move() will be invoked
Second it supports multiple inheritance as class A can implements as many interfaces.

Amazing answers!!
I too want to put my opinion on Interface.
As the name says it is interface which means it will provide interface between two classes.
It help a class or interface hold multiple behavior at the same time.
Who ever having the interface can access the behavior of the class agreed with the interface.
interface teacher
{
//methods related to teacher
}
interface student
{
//methods related to student
}
interface employee
{
//methods related to employee
}
class Person:teacher,student,employee
{
//definition of all the methods in teacher,student, employee interface
//and method for person
}
Now here which ever class is having teacher interface will have access to only teacher behavior of Person.
Similarly the class or module having student interface will have access to only student behavior of person.
Using abstract class, it is not at all possible.
Hope this will add some additional points. :)
Happy coding!!.

We Keep Coding

Java is a programming language and computing platform first released by Sun Microsystems in 1995.