I am trying to install Java in Windows 10 Home (64 bit). Like many tutorials point out, I downloaded the Java jdk setup file, executed it and once installed changed the Path in the Environment Variables. But for some reason, when I execute the command 'javac' it returns the not internal/external command error in Command Prompt but runs absolutely fine in Powershell. I tried to rectify this by uninstalling Java and reinstalling it very carefully, following all the steps but still this keeps on happening.
Also, during installation of Java, I lost the original value to my Path variable. Could this be causing the problem?
Edit : I was able to get the java command running in the command prompt but javac still won't work. I've already tried the methods suggested on other forums and this one but no luck so far.
See there is no problem with Java installation if you can find JDK(Java development kit) and JRE(Server Java runtime environment) in programme files in windows in a JAVA folder.
The main problem is with the environment variable declaration.
Go to environment variables and make a new path for that.
JAVA_HOME = "YOUR JDK & JRE INSTALLATION PATH"
And another one is
JAVA = "YOUR JDK & JRE INSTALLATION PATH"
Hope that help to you. After doing that if still there problem persisist just restart your PC and check again.
Just add your variable location up to /bin/
Refer to this :
https://www.windows-commandline.com/javac-not-recognized-internal-external-command/
Open file explorer
Right click computer then click properties
click advanced system settings
click environmental variables
click path (for me there was one in user variables for admin and another in system variables)
find the directory for javac (for me it was here C:\Program Files (x86)\Java\jdk1.8.0_191\bin)
so go back to file explorer and open program files x86
then open the java folder
then open the jdk folder
then open the bin folder
highlight the path in the search bar and copy it
click edit on path and paste into the path in the environmental variable for both(if you have more than one path)
If no path exists then create one in user variables
If there is any existing text place a semicolon ; between the text you pasted in there and the preexisting text.
close command prompt and reopen it.
type javac -version
the version info should be listed
This problem comes up with the directory of your command prompt.
check your PowerShell and command prompt default directory.
We can run command prompt as WinKey+R then type cmd, Hit the enter button then check our java version cmd javac -version.
I've been learning java on my own and I've come to a point where I need to pass arguments from the command prompt. I had previously been using Netbeans, which has become a bit of a crutch, but I want to learn how to program using notepad and the command prompt. I am running Windows 8.1. I downloaded the JDK 7 to my C:\ directory. I tried typing "java -version" and "javac -version" to check it out (as my book says to do) but it tells me "'java' is not recognized as an internal or external command, operable program or batch file." It says the same when I try javac. I do this from C:\ and from C:\Java> and get the same result. I uninstalled Netbeans, thinking maybe it was interfering somehow ... still not working. The book I'm using says it covers Java 7.
I don't understand why it doesn't work. Is there some compatibility issue with Java 7 and win 8.1? My java 7 is update 71 or 72. Did this update change something and now arguments are passed differently? Can anyone help me out? Thank you.
You need to download the JDK (if you don't already have it) and add the location to the end of your PATH. In a single command line session you can do this with PATH=%PATH%;<jdk location> where <jdk location> is the bin folder of the jdk.
Some installs of java manage environment variables and some do not. It appears yours has not. or you have not installed it correctly.
many applications understand JAVA_HOME, so you should set that to the root of the installation in your environment variables.
You will also need to add the bin folder to your path.
Generally, when using windows, you can install a windows exe version, which will manage all of this for you. Other installations just copy themselves to the c drive and expect java applications to know where to look.
Go to System environment variable. Select Variable PATH. Click on edit button. Append a ; after current value of Variable value. Copy jdk's bin folder path. In my PC it is "C:\Program Files\Java\jdk1.8.0_20\bin" without quotes. Then paste jdk's bin path. Copy jre's bin folder path. In my PC it is "C:\Program Files\Java\jdk1.8.0_20\jre\bin". Append a ; then paste jre's bin folder path. Click OK.
Download the JDK from this page. Run the installer.
Open the Command Prompt. Try it. It works. Yay!
If you use the full path to your java.exe, you dont need to set up any PATH and JAVA_HOME:
c:\> cd \work
c:\work> c:\java\bin\java.exe -cp classes\ your.Main
If your book does not use the normal JDK installers it really is supposed to explain that. (However it is normal behaviour for any executable).
(The above example asumes you compile into c:\work\classes\your\Main.class and your JDK is installed (installer does the unpack) in C:\java (typically you would use default locations like C:\Program Files\Java\jdk1.8.0\bin\java.exe).
I have problems compiling Java programs from command line interfaces (both command prompt and NetBeans terminal).
I added the jdk directory to the PATH system variable but not all commands are recognizable, some commands (in the jdk1.6.0_37\bin folder) are recognized (like: java, javaw, packger)and others I'd have to type the full directory name for it to work (like: jar, javac, javah, javap) (this applies for both cmd and NB).
I don't know why this should be, all of these files are .exe , all are Java Platform SE binary, the only difference I can see is the icon of the files, the ones that work have the Java logo (Coffee Mug) and the rest have the standard .exe logo. Any help would be appreciated. Thanks
You have to add the jdk1.6.0_37\bin directory to the PATH variable. That is where all the commands that you want to run are in. After you add the directory to the PATH variable, open a new command prompt and run those commands again.
I'm searched many answers that suggest me to type in cmd:
set path = "%path%;c:program files\java\jdk1.7.0\bin"
but this is WRONG!
the right solution is that you leave "set" and just type
path = %path%;c:program files\java\jdk1.7.0\bin
P/s: of course you have to replace "jdk1.7.0" folder by your current java version folder
I am trying to run my java program from command line.
I read an article about setting up classpath, but I get an error of javac is
not recognized as internal or external command. What should I do? (I dont want to set a permanent CLASSPATH)
This is what I have done in my command line
D:\user> set path=%path%;C:\Program Files\Java\1.7.0_07\bin
D:\user> cd testing
D:\user\testing> javac firstProgram.java
'javac' is not recognized as an internal or external command,
operable program or batch file.
Thank you
Assuming that the PATH is correct1, the most likely cause is that you have a JRE installation ... and a JRE doesn't include a java compiler. You need a JDK installation if you want to compile from the command line.
(You can confirm this by looking in the C:\Program Files\Java\1.7.0_07\bin directory to see if it contains a javac.exe file. A JRE won't ...)
Where can I find the Java compiler to download..
You need to download one of the JDK installers; see http://www.oracle.com/technetwork/java/javase/downloads/index.html
1 - I don't think quotes are required in a PATH variable on Windows. At least that's what various examples that Google found for me seem to imply. But I've never really understood the logic behind quoting in Windows ...
Its an issue related to Program Files.
First make sure that your JDK Folder is installed in Program Files or Program Files(x86) or any other folder.
Then you should use the path of bin folder in " ". Because command prompt does break the string at space. When you will write it in " " then it will take is as a whole String.
You try these commands
set path=%path%;"C:\Program Files\Java\1.7.0_07\bin"
or
set path=%path%;"C:\Program Files(x86)\Java\1.7.0_07\bin"
It might help you to get out of this.
Better do it in Environmental variable and check it!
try below command is recognized from command prompt
C:\Program Files\Java\1.7.0_07\bin\javac ab.java
This is just to verify your javac
Here's how you can set the path temporary, meaning if you close and reopen "command prompt" you will have to set the path again.
Assuming the path is C:\Program Files\Java\jdk1.6.0\bin
TYPE IN C:\Program Files\Java\jdk1.6.0\bin AND HIT ENTER
that's it.
The commands D:\user> set path=%path%;C:\Program Files\Java\1.7.0_07\bin works well for me
Adding few more information to this:
Please check the version of JDK and JRE installed on your computer. Recently I faced the same problem even after setting the PATH. It gives the error "javac - command is not recognised"
Solution is there must be similar versions of JDK as well as JRE
E.g.: JDK 1.7.75 along with JRE 1.7.75
I want to execute my program without using an IDE.
I've created a jar file and an exectuable jar file. When
I double click the exe jar file, nothing happens, and when I try to use the command in cmd it gives me this:
Error: Unable to access jarfile <path>
I use the command: java -jar Calculator.jar
How I created the jar:
Right click on project folder (Calculator)
Select
Click on Java Folder and select "Exectuable Jar File", then select next
Launch Configuration: Main - Calculator
Create Export Destination
Hit "Finish" and profit! Well, not really.
I had encountered this issue when I had run my Jar file as
java -jar TestJar
instead of
java -jar TestJar.jar
Missing the extension .jar also causes this issue.
Fixed
I just placed it in a different folder and it worked.
[Possibly Windows only]
Beware of spaces in the path, even when your jar is in the current working directory. For example, for me this was failing:
java -jar myjar.jar
I was able to fix this by givng the full, quoted path to the jar:
java -jar "%~dp0\myjar.jar"
Credit goes to this answer for setting me on the right path....
I had this issue under CygWin in Windows. I have read elsewhere that Java does not understand the CygWin paths (/cygdrive/c/some/dir instead of C:\some\dir) - so I used a relative path instead: ../../some/dir/sbt-launch.jar.
I had the same issue when trying to launch the jar file. The path contained a space, so I had to place quotes around. Instead of:
java -jar C:\Path to File\myJar.jar
i had to write
java -jar "C:\Path to File\myJar.jar"
Just came across the same problem trying to make a bad USB...
I tried to run this command in admin cmd
java -jar c:\fw\ducky\duckencode.jar -I c:\fw\ducky\HelloWorld.txt -o c:\fw\ducky\inject.bin
But got this error:
Error: unable to access jarfile c:\fw\ducky\duckencode.jar
Solution
1st step
Right click the jarfile in question. Click properties.
Click the unblock tab in bottom right corner.
The file was blocked, because it was downloaded and not created on my PC.
2nd step
In the cmd I changed the directory to where the jar file is located.
cd C:\fw\ducky\
Then I typed dir and saw the file was named duckencode.jar.jar
So in cmd I changed the original command to reference the file with .jar.jar
java -jar c:\fw\ducky\duckencode.jar.jar -I c:\fw\ducky\HelloWorld.txt -o c:\fw\ducky\inject.bin
That command executed without error messages and the inject.bin I was trying to create was now located in the directory.
Hope this helps.
None of the provided answers worked for me on macOS 11 Big Sur. The problem turned out to be that programs require special permission to access the Desktop, Documents, and Downloads folders, and Java breaks both the exception for directly opened files and the permission request popup.
Fixes:
Move the .jar into a folder that isn’t (and isn’t under) Documents, Desktop, or Downloads.
Manually grant the permission. Go to System Preferences → Security and Privacy → Privacy → Files and Folders → java, and check the appropriate folders.
I had a similar problem and I even tried running my CMD with administrator rights, but it did not solve the problem.
The basic thing is to make sure to change the Directory in cmd to the current directory where your jar file is.
Do the following steps:
Copy jar file to Desktop.
Run CMD
Type command cd desktop
Then type java -jar filename.jar
This should work.
Edit: From JDK-11 onwards ( JEP 330: Launch Single-File Source-Code Programs )
Since Java 11, java command line tool has been able to run a single-file source-code directly. e.g.
java filename.java
If you are using OSX, downloaded files are tagged with a security flag that prevents unsigned applications from running.
to check this you can view extended attributes on the file
$ ls -l#
-rw-r--r--# 1 dave staff 17663235 13 Oct 11:08 server-0.28.2-java8.jar
com.apple.metadata:kMDItemWhereFroms 619
com.apple.quarantine 68
You can then clear the attributes with
xattr -c file.jar
It can also happen if you don't properly supply your list of parameters. Here's what I was doing:
java -jar test#gmail.com testing_subject file.txt test_send_emails.jar
Instead of the correct version:
java -jar test_send_emails.jar test#gmail.com testing_subject file.txt
This worked for me.
cd /path/to/the/jar/
java -jar ./Calculator.jar
For me it happens if you use native Polish chars in foldername that is in the PATH.
So maybe using untypical chars was the reason of the problem.
sometime it happens when you try to (run or create) a .jar file under /libs folder by right click it in android studio. you can select the dropdown in top of android stuio and change it to app. This will work
My particular issue was caused because I was working with directories that involved symbolic links (shortcuts). Consequently, trying java -jar ../../myJar.jar didn't work because I wasn't where I thought I was.
Disregarding relative file paths fixed it right up.
In my case the suggested file name to be used was jarFile*.jar in the command line. The file in the folder was jarFile-1.2.3.jar . So I renamed the file to jarFile. Then I used jarFile.jar instead of jarFile*.jar and then the problem got resolved
It can happen on a windows machine when you have spaces in the names of the folder. The solution would be to enter the path between " ".
For example:
java -jar c:\my folder\x.jar -->
java -jar "c:\my folder\x.jar"
To avoid any permission issues, try to run it as administrator. This worked for me on Win10.
I know this thread is years ago and issue was fixed too. But I hope this would helps someone else in future since I've encountered some similar issues while I tried to install Oracle WebLogic 12c and Oracle OFR in which its installer is in .jar format. For mine case, it was either didn't wrap the JDK directory in quotes or simply typo.
Run Command Prompt as administrator and execute the command in this format. Double check the sentence if there is typo.
"C:\Program Files\Java\jdk1.xxxxx\bin\java" -jar C:\Users\xxx\Downloads\xxx.jar
If it shows something like JRE 1.xxx is not a valid JDK Java Home, make sure the System variables for JAVA_HOME in Environment Variables is pointing to the correct JDK directory. JDK 1.8 or above is recommended (2018).
A useful thread here, you may refer it: Why its showing your JDK c:program files\java\jre7 is not a valid JDK while instaling weblogic server?
For me it happen because i run it with default java version (7) and not with compiled java version (8) used to create this jar.
So i used:
%Java8_64%\bin\java -jar myjar.jar
Instead of java 7 version:
java -jar myjar.jar
I had a similar problem where TextMate or something replaced the double quotes with the unicode double quotes.
Changing my SELENIUM_SERVER_JAR from the unicode double quotes to regular double quotes and that solved my problem.
this is because you are looking for the file in the wrong path
1. look for the path of the folder where you placed the file
2. change the directory cd in cmd use the right path
I use NetBeans and had the same issue. After I ran build and clean project my program was executable. The Java documentation says that the build/clean command is for rebuilding the project from scratch basically and removing any past compiles. I hope this helps. Also, I'd read the documentation. Oracle has NetBeans and Java learning trails. Very helpful. Good luck!
Maybe you have specified the wrong version of your jar.
I finally pasted my jar file into the same folder as my JDK so I didn't have to include the paths. I also had to open the command prompt as an admin.
Right click Command Prompt and "Run as administrator"
Navigate to the directory where you saved your jdk to
In the command prompt type: java.exe -jar <jar file name>.jar
Keep the file in same directory where you are extracting it. That worked for me.
This is permission issue, see if the directory is under your User.
That's why is working in another folder!
Rename the jar file and try
Explanation :
yes, I know there are many answers still I want to add one point here which I faced.
I built the jar and I moved it into the server where I deploy (This is the normal process)
here the file name which I moved already existed in the server, here the file will override obviously right. In this case, I faced this issue.
maybe at the time of overriding there can be a permission copy issue.
Hope this will help someone.
Have you tried to run it under administrator privoleges?
meaning, running the command in "Run As" and then select administrator with proper admin credentials
worked for me
I was trying this:
After giving the file read, write, execute priviledges:
chmod 777 java-repl.jar
alias jr="java -jar $HOME/Dev/java-repl/java-repl.jar"
Unable to access bla bla..., this was on Mac OS though
So I tried this:
alias jr="cd $HOME/Dev/java-repl/ && java -jar java-repl.jar"
This did not work "Unable to access jarfile"
"C:\Program Files\java\jdk-13+33-jre\bin\javaw.exe" -jar "C:\Program Files\Maxim Integrated Products\1-Wire Drivers x64\ OneWireViewer.jar"
This does work
"C:\Program Files\java\jdk-13+33-jre\bin\javaw.exe" -jar "C:\Program Files\Maxim Integrated Products\1-Wire Drivers x64\OneWireViewer.jar"
The difference is the single space in front of OneWireViewer.jar not withstanding that it is surrounded with quotes and even has other spaces.