What if I want to write a regex which says match [^some pattern] && [not this pattern]. So I want it to match some pattern but not a pattern [^\.\.] (not a double dot) in english
For example:
it shouldn't match:
../../
but it should match
hey/../
You could use a negative lookahead assertion:
^(?!excludepattern)includepattern
will match includepattern unless it would also match excludepattern.
For example,
^(?!\.\.)([\w.,]+/)+$
would match any slash-separated sequence of letters, digits, underscore, dot or comma, unless it starts with .. (as in your example).
To address your comment (as I understand it), try this:
^(?!.*\.\.)[\w.]*$
This will match a string that consists entirely of alphanumeric characters or dots, but does not contain two dots in a row anywhere. It also matches the empty string.
Related
I need a regular expression able to match everything but a string starting with a specific pattern (specifically index.php and what follows, like index.php?id=2342343).
Regex: match everything but:
a string starting with a specific pattern (e.g. any - empty, too - string not starting with foo):
Lookahead-based solution for NFAs:
^(?!foo).*$
^(?!foo)
Negated character class based solution for regex engines not supporting lookarounds:
^(([^f].{2}|.[^o].|.{2}[^o]).*|.{0,2})$
^([^f].{2}|.[^o].|.{2}[^o])|^.{0,2}$
a string ending with a specific pattern (say, no world. at the end):
Lookbehind-based solution:
(?<!world\.)$
^.*(?<!world\.)$
Lookahead solution:
^(?!.*world\.$).*
^(?!.*world\.$)
POSIX workaround:
^(.*([^w].{5}|.[^o].{4}|.{2}[^r].{3}|.{3}[^l].{2}|.{4}[^d].|.{5}[^.])|.{0,5})$
([^w].{5}|.[^o].{4}|.{2}[^r].{3}|.{3}[^l].{2}|.{4}[^d].|.{5}[^.]$|^.{0,5})$
a string containing specific text (say, not match a string having foo):
Lookaround-based solution:
^(?!.*foo)
^(?!.*foo).*$
POSIX workaround:
Use the online regex generator at www.formauri.es/personal/pgimeno/misc/non-match-regex
a string containing specific character (say, avoid matching a string having a | symbol):
^[^|]*$
a string equal to some string (say, not equal to foo):
Lookaround-based:
^(?!foo$)
^(?!foo$).*$
POSIX:
^(.{0,2}|.{4,}|[^f]..|.[^o].|..[^o])$
a sequence of characters:
PCRE (match any text but cat): /cat(*SKIP)(*FAIL)|[^c]*(?:c(?!at)[^c]*)*/i or /cat(*SKIP)(*FAIL)|(?:(?!cat).)+/is
Other engines allowing lookarounds: (cat)|[^c]*(?:c(?!at)[^c]*)* (or (?s)(cat)|(?:(?!cat).)*, or (cat)|[^c]+(?:c(?!at)[^c]*)*|(?:c(?!at)[^c]*)+[^c]*) and then check with language means: if Group 1 matched, it is not what we need, else, grab the match value if not empty
a certain single character or a set of characters:
Use a negated character class: [^a-z]+ (any char other than a lowercase ASCII letter)
Matching any char(s) but |: [^|]+
Demo note: the newline \n is used inside negated character classes in demos to avoid match overflow to the neighboring line(s). They are not necessary when testing individual strings.
Anchor note: In many languages, use \A to define the unambiguous start of string, and \z (in Python, it is \Z, in JavaScript, $ is OK) to define the very end of the string.
Dot note: In many flavors (but not POSIX, TRE, TCL), . matches any char but a newline char. Make sure you use a corresponding DOTALL modifier (/s in PCRE/Boost/.NET/Python/Java and /m in Ruby) for the . to match any char including a newline.
Backslash note: In languages where you have to declare patterns with C strings allowing escape sequences (like \n for a newline), you need to double the backslashes escaping special characters so that the engine could treat them as literal characters (e.g. in Java, world\. will be declared as "world\\.", or use a character class: "world[.]"). Use raw string literals (Python r'\bworld\b'), C# verbatim string literals #"world\.", or slashy strings/regex literal notations like /world\./.
You could use a negative lookahead from the start, e.g., ^(?!foo).*$ shouldn't match anything starting with foo.
You can put a ^ in the beginning of a character set to match anything but those characters.
[^=]*
will match everything but =
Just match /^index\.php/, and then reject whatever matches it.
In Python:
>>> import re
>>> p='^(?!index\.php\?[0-9]+).*$'
>>> s1='index.php?12345'
>>> re.match(p,s1)
>>> s2='index.html?12345'
>>> re.match(p,s2)
<_sre.SRE_Match object at 0xb7d65fa8>
Came across this thread after a long search. I had this problem for multiple searches and replace of some occurrences. But the pattern I used was matching till the end. Example below
import re
text = "start![image]xxx(xx.png) yyy xx![image]xxx(xxx.png) end"
replaced_text = re.sub(r'!\[image\](.*)\(.*\.png\)', '*', text)
print(replaced_text)
gave
start* end
Basically, the regex was matching from the first ![image] to the last .png, swallowing the middle yyy
Used the method posted above https://stackoverflow.com/a/17761124/429476 by Firish to break the match between the occurrence. Here the space is not matched; as the words are separated by space.
replaced_text = re.sub(r'!\[image\]([^ ]*)\([^ ]*\.png\)', '*', text)
and got what I wanted
start* yyy xx* end
I need to check if a String matches this specific pattern.
The pattern is:
(Numbers)(all characters allowed)(numbers)
and the numbers may have a comma ("." or ",")!
For instance the input could be 500+400 or 400,021+213.443.
I tried Pattern.matches("[0-9],?.?+[0-9],?.?+", theequation2), but it didn't work!
I know that I have to use the method Pattern.match(regex, String), but I am not being able to find the correct regex.
Dealing with numbers can be difficult. This approach will deal with your examples, but check carefully. I also didn't do "all characters" in the middle grouping, as "all" would include numbers, so instead I assumed that finding the next non-number would be appropriate.
This Java regex handles the requirements:
"((-?)[\\d,.]+)([^\\d-]+)((-?)[\\d,.]+)"
However, there is a potential issue in the above. Consider the following:
300 - -200. The foregoing won't match that case.
Now, based upon the examples, I think the point is that one should have a valid operator. The number of math operations is likely limited, so I would whitelist the operators in the middle. Thus, something like:
"((-?)[\\d,.]+)([\\s]*[*/+-]+[\\s]*)((-?)[\\d,.]+)"
Would, I think, be more appropriate. The [*/+-] can be expanded for the power operator ^ or whatever. Now, if one is going to start adding words (such as mod) in the equation, then the expression will need to be modified.
You can see this regular expression here
In your regex you have to escape the dot \. to match it literally and escape the \+ or else it would make the ? a possessive quantifier. To match 1+ digits you have to use a quantifier [0-9]+
For your example data, you could match 1+ digits followed by an optional part which matches either a dot or a comma at the start and at the end. If you want to match 1 time any character you could use a dot.
Instead of using a dot, you could also use for example a character class [-+*] to list some operators or list what you would allow to match. If this should be the only match, you could use anchors to assert the start ^ and the end $ of the string.
\d+(?:[.,]\d+)?.\d+(?:[.,]\d+)?
In Java:
String regex = "\\d+(?:[.,]\\d+)?.\\d+(?:[.,]\\d+)?";
Regex demo
That would match:
\d+(?:[.,]\d+)? 1+ digits followed by an optional part that matches . or , followed by 1+ digits
. Match any character (Use .+) to repeat 1+ times
Same as the first pattern
I have this requirement - for an input string such as the one shown below
8This8 is &reallly& a #test# of %repl%acing% %mul%tiple 9matched9 9pairs
I would like to strip the matched word boundaries (where the matching pair is 8 or & or % etc) and will result in the following
This is really a test of repl%acing %mul%tiple matched 9pairs
This list of characters that is used for the pairs can vary e.g. 8,9,%,# etc and only the words matching the start and end with each type will be stripped of those characters, with the same character embedded in the word remaining where it is.
Using Java I can do a pattern as \\b8([^\\s]*)8\\b and replacement as $1, to capture and replace all occurrences of 8...8, but how do I do this for all the types of pairs?
I can provide a pattern such as \\b8([^\\s]*)8\\b|\\b9([^\\s]*)9\\b .. and so on that will match all types of matching pairs *8,9,..), but how do I specify a 'variable' replacement group -
e.g. if the match is 9...9, the the replacement should be $2.
I can of course run it through multiple of these, each replacing a specific type of pair, but I am wondering if there is a more elegant way.
Or is there a completely different way of approaching this problem?
Thanks.
You could use the below regex and then replace the matched characters by the characters present inside the group index 2.
(?<!\S)(\S)(\S+)\1(?=\s|$)
OR
(?<!\S)(\S)(\S*)\1(?=\s|$)
Java regex would be,
(?<!\\S)(\\S)(\\S+)\\1(?=\\s|$)
DEMO
String s1 = "8This8 is &reallly& a #test# of %repl%acing% %mul%tiple 9matched9 9pairs";
System.out.println(s1.replaceAll("(?<!\\S)(\\S)(\\S+)\\1(?=\\s|$)", "$2"));
Output:
This is reallly a test of repl%acing %mul%tiple matched 9pairs
Explanation:
(?<!\\S) Negative lookbehind, asserts that the match wouldn't be preceded by a non-space character.
(\\S) Captures the first non-space character and stores it into group index 1.
(\\S+) Captures one or more non-space characters.
\\1 Refers to the character inside first captured group.
(?=\\s|$) And the match must be followed by a space or end of the line anchor.
This makes sure that the first character and last character of the string must be the same. If so, then it replaces the whole match by the characters which are present inside the group index 2.
For this specific case, you could modify the above regex as,
String s1 = "8This8 is &reallly& a #test# of %repl%acing% %mul%tiple 9matched9 9pairs";
System.out.println(s1.replaceAll("(?<!\\S)([89&#%])(\\S+)\\1(?=\\s|$)", "$2"));
DEMO
(?<![a-zA-Z])[8&#%9](?=[a-zA-Z])([^\s]*?)(?<=[a-zA-Z])[8&#%9](?![a-zA-Z])
Try this.Replace with $1 or \1.See demo.
https://regex101.com/r/qB0jV1/15
(?<![a-zA-Z])[^a-zA-Z](?=[a-zA-Z])([^\s]*?)(?<=[a-zA-Z])[^a-zA-Z](?![a-zA-Z])
Use this if you have many delimiters.
I have a string with digits and separators.
The digits may either be separated by a comma or a hyphen. But there may never be two digits that are both separated by hyphens without a comma in between.
Example:
valid: 123,12,2,1-3,1,1-3,1
invalid: 123,12,2,1-3,1,1-3-5,1
I have a regex that almost works, except it does not detect those 1-3-5 invalid lines.
How can I improve the following?
^([0-9])+((,|-)[0-9]+)*$
You can decompose your input:
normal: one or more digits, optionally followed by a dash then one or more digits;
special: a comma.
The regex for the normal case can be written as \d+(?:-\d+)?; for the special case, this is simply ,.
Applying the normal* (special normal*)* pattern, and adding anchors and quantifiers, we have:
^\d+(?:-\d+)?(,\d+(?:-\d+)?)*$
Here's a solution:
^(?:\d+(?:-\d+)?(?:,|$))+$
Demo
Explanation: Match a number, optionally followed by a dash and another number, then match either a comma or the end of the string. And repeat.
You can add condition using look-around which will search for -digits- so your regex can look like:
^(?!.*-\\d+-)[0-9]+([,-][0-9]+)*$
^^^^^^^^^^^^-negative look-ahead, match will fail if there is any -digits- in your string
I'm trying to compare following strings with regex:
#[xyz="1","2"'"4"] ------- valid
#[xyz] ------------- valid
#[xyz="a5","4r"'"8dsa"] -- valid
#[xyz="asd"] -- invalid
#[xyz"asd"] --- invalid
#[xyz="8s"'"4"] - invalid
The valid pattern should be:
#[xyz then = sign then some chars then , then some chars then ' then some chars and finally ]. This means if there is characters after xyz then they must be in format ="XXX","XXX"'"XXX".
Or only #[xyz]. No character after xyz.
I have tried following regex, but it did not worked:
String regex = "#[xyz=\"[a-zA-z][0-9]\",\"[a-zA-z][0-9]\"'\"[a-zA-z][0-9]\"]";
Here the quotations (in part after xyz) are optional and number of characters between quotes are also not fixed and there could also be some characters before and after this pattern like asdadad #[xyz] adadad.
You can use the regex:
#\[xyz(?:="[a-zA-z0-9]+","[a-zA-z0-9]+"'"[a-zA-z0-9]+")?\]
See it
Expressed as Java string it'll be:
String regex = "#\\[xyz=\"[a-zA-z0-9]+\",\"[a-zA-z0-9]+\"'\"[a-zA-z0-9]+\"\\]";
What was wrong with your regex?
[...] defines a character class. When you want to match literal [ and ] you need to escape it by preceding with a \.
[a-zA-z][0-9] match a single letter followed by a single digit. But you want one or more alphanumeric characters. So you need [a-zA-Z0-9]+
Use this:
String regex = "#\\[xyz(=\"[a-zA-z0-9]+\",\"[a-zA-z0-9]+\"'\"[a-zA-z0-9]+\")?\\]";
When you write [a-zA-z][0-9] it expects a letter character and a digit after it. And you also have to escape first and last square braces because square braces have special meaning in regexes.
Explanation:
[a-zA-z0-9]+ means alphanumeric character (but not an underline) one or more times.
(=\"[a-zA-z0-9]+\",\"[a-zA-z0-9]+\"'\"[a-zA-z0-9]+\")? means that expression in parentheses can be one time or not at all.
Since square brackets have a special meaning in regex, you used it by yourself, they define character classes, you need to escape them if you want to match them literally.
String regex = "#\\[xyz=\"[a-zA-z][0-9]\",\"[a-zA-z][0-9]\"'\"[a-zA-z][0-9]\"\\]";
The next problem is with '"[a-zA-z][0-9]' you define "first a letter, second a digit", you need to join those classes and add a quantifier:
String regex = "#\\[xyz=\"[a-zA-z0-9]+\",\"[a-zA-z0-9]+\"'\"[a-zA-z0-9]+\"\\]";
See it here on Regexr
there could also be some characters before and after this pattern like
asdadad #[xyz] adadad.
Regex should be:
String regex = "(.)*#\\[xyz(=\"[a-zA-z0-9]+\",\"[a-zA-z0-9]+\"'\"[a-zA-z0-9]+\")?\\](.)*";
The First and last (.)* will allow any string before the pattern as you have mentioned in your edit. As said by #ademiban this (=\"[a-zA-z0-9]+\",\"[a-zA-z0-9]+\"'\"[a-zA-z0-9]+\")? will come one time or not at all. Other mistakes are also very well explained by Others +1 to all other.