I'm looking for a small code snippet that will find a line in file and remove that line (not content but line) but could not find. So for example I have in a file following:
myFile.txt:
aaa
bbb
ccc
ddd
Need to have a function like this: public void removeLine(String lineContent), and if I pass
removeLine("bbb"), I get file like this:
myFile.txt:
aaa
ccc
ddd
This solution may not be optimal or pretty, but it works. It reads in an input file line by line, writing each line out to a temporary output file. Whenever it encounters a line that matches what you are looking for, it skips writing that one out. It then renames the output file. I have omitted error handling, closing of readers/writers, etc. from the example. I also assume there is no leading or trailing whitespace in the line you are looking for. Change the code around trim() as needed so you can find a match.
File inputFile = new File("myFile.txt");
File tempFile = new File("myTempFile.txt");
BufferedReader reader = new BufferedReader(new FileReader(inputFile));
BufferedWriter writer = new BufferedWriter(new FileWriter(tempFile));
String lineToRemove = "bbb";
String currentLine;
while((currentLine = reader.readLine()) != null) {
// trim newline when comparing with lineToRemove
String trimmedLine = currentLine.trim();
if(trimmedLine.equals(lineToRemove)) continue;
writer.write(currentLine + System.getProperty("line.separator"));
}
writer.close();
reader.close();
boolean successful = tempFile.renameTo(inputFile);
public void removeLineFromFile(String file, String lineToRemove) {
try {
File inFile = new File(file);
if (!inFile.isFile()) {
System.out.println("Parameter is not an existing file");
return;
}
//Construct the new file that will later be renamed to the original filename.
File tempFile = new File(inFile.getAbsolutePath() + ".tmp");
BufferedReader br = new BufferedReader(new FileReader(file));
PrintWriter pw = new PrintWriter(new FileWriter(tempFile));
String line = null;
//Read from the original file and write to the new
//unless content matches data to be removed.
while ((line = br.readLine()) != null) {
if (!line.trim().equals(lineToRemove)) {
pw.println(line);
pw.flush();
}
}
pw.close();
br.close();
//Delete the original file
if (!inFile.delete()) {
System.out.println("Could not delete file");
return;
}
//Rename the new file to the filename the original file had.
if (!tempFile.renameTo(inFile))
System.out.println("Could not rename file");
}
catch (FileNotFoundException ex) {
ex.printStackTrace();
}
catch (IOException ex) {
ex.printStackTrace();
}
}
This I have found on the internet.
You want to do something like the following:
Open the old file for reading
Open a new (temporary) file for writing
Iterate over the lines in the old file (probably using a BufferedReader)
For each line, check if it matches what you are supposed to remove
If it matches, do nothing
If it doesn't match, write it to the temporary file
When done, close both files
Delete the old file
Rename the temporary file to the name of the original file
(I won't write the actual code, since this looks like homework, but feel free to post other questions on specific bits that you have trouble with)
So, whenever I hear someone mention that they want to filter out text, I immediately think to go to Streams (mainly because there is a method called filter which filters exactly as you need it to). Another answer mentions using Streams with the Apache commons-io library, but I thought it would be worthwhile to show how this can be done in standard Java 8. Here is the simplest form:
public void removeLine(String lineContent) throws IOException
{
File file = new File("myFile.txt");
List<String> out = Files.lines(file.toPath())
.filter(line -> !line.contains(lineContent))
.collect(Collectors.toList());
Files.write(file.toPath(), out, StandardOpenOption.WRITE, StandardOpenOption.TRUNCATE_EXISTING);
}
I think there isn't too much to explain there, basically Files.lines gets a Stream<String> of the lines of the file, filter takes out the lines we don't want, then collect puts all of the lines of the new file into a List. We then write the list over top of the existing file with Files.write, using the additional option TRUNCATE so the old contents of the file are replaced.
Of course, this approach has the downside of loading every line into memory as they all get stored into a List before being written back out. If we wanted to simply modify without storing, we would need to use some form of OutputStream to write each new line to a file as it passes through the stream, like this:
public void removeLine(String lineContent) throws IOException
{
File file = new File("myFile.txt");
File temp = new File("_temp_");
PrintWriter out = new PrintWriter(new FileWriter(temp));
Files.lines(file.toPath())
.filter(line -> !line.contains(lineContent))
.forEach(out::println);
out.flush();
out.close();
temp.renameTo(file);
}
Not much has been changed in this example. Basically, instead of using collect to gather the file contents into memory, we use forEach so that each line that makes it through the filter gets sent to the PrintWriter to be written out to the file immediately and not stored. We have to save it to a temporary file, because we can't overwrite the existing file at the same time as we are still reading from it, so then at the end, we rename the temp file to replace the existing file.
Using apache commons-io and Java 8 you can use
List<String> lines = FileUtils.readLines(file);
List<String> updatedLines = lines.stream().filter(s -> !s.contains(searchString)).collect(Collectors.toList());
FileUtils.writeLines(file, updatedLines, false);
public static void deleteLine() throws IOException {
RandomAccessFile file = new RandomAccessFile("me.txt", "rw");
String delete;
String task="";
byte []tasking;
while ((delete = file.readLine()) != null) {
if (delete.startsWith("BAD")) {
continue;
}
task+=delete+"\n";
}
System.out.println(task);
BufferedWriter writer = new BufferedWriter(new FileWriter("me.txt"));
writer.write(task);
file.close();
writer.close();
}
Here you go. This solution uses a DataInputStream to scan for the position of the string you want replaced and uses a FileChannel to replace the text at that exact position. It only replaces the first occurrence of the string that it finds. This solution doesn't store a copy of the entire file somewhere, (either the RAM or a temp file), it just edits the portion of the file that it finds.
public static long scanForString(String text, File file) throws IOException {
if (text.isEmpty())
return file.exists() ? 0 : -1;
// First of all, get a byte array off of this string:
byte[] bytes = text.getBytes(/* StandardCharsets.your_charset */);
// Next, search the file for the byte array.
try (DataInputStream dis = new DataInputStream(new FileInputStream(file))) {
List<Integer> matches = new LinkedList<>();
for (long pos = 0; pos < file.length(); pos++) {
byte bite = dis.readByte();
for (int i = 0; i < matches.size(); i++) {
Integer m = matches.get(i);
if (bytes[m] != bite)
matches.remove(i--);
else if (++m == bytes.length)
return pos - m + 1;
else
matches.set(i, m);
}
if (bytes[0] == bite)
matches.add(1);
}
}
return -1;
}
public static void replaceText(String text, String replacement, File file) throws IOException {
// Open a FileChannel with writing ability. You don't really need the read
// ability for this specific case, but there it is in case you need it for
// something else.
try (FileChannel channel = FileChannel.open(file.toPath(), StandardOpenOption.WRITE, StandardOpenOption.READ)) {
long scanForString = scanForString(text, file);
if (scanForString == -1) {
System.out.println("String not found.");
return;
}
channel.position(scanForString);
channel.write(ByteBuffer.wrap(replacement.getBytes(/* StandardCharsets.your_charset */)));
}
}
Example
Input: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Method Call:
replaceText("QRS", "000", new File("path/to/file");
Resulting File: ABCDEFGHIJKLMNOP000TUVWXYZ
Here is the complete Class. In the below file "somelocation" refers to the actual path of the file.
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.File;
import java.io.FileReader;
import java.io.FileWriter;
import java.io.IOException;
public class FileProcess
{
public static void main(String[] args) throws IOException
{
File inputFile = new File("C://somelocation//Demographics.txt");
File tempFile = new File("C://somelocation//Demographics_report.txt");
BufferedReader reader = new BufferedReader(new FileReader(inputFile));
BufferedWriter writer = new BufferedWriter(new FileWriter(tempFile));
String currentLine;
while((currentLine = reader.readLine()) != null) {
if(null!=currentLine && !currentLine.equalsIgnoreCase("BBB")){
writer.write(currentLine + System.getProperty("line.separator"));
}
}
writer.close();
reader.close();
boolean successful = tempFile.renameTo(inputFile);
System.out.println(successful);
}
}
This solution reads in an input file line by line, writing each line out to a StringBuilder variable. Whenever it encounters a line that matches what you are looking for, it skips writing that one out. Then it deletes file content and put the StringBuilder variable content.
public void removeLineFromFile(String lineToRemove, File f) throws FileNotFoundException, IOException{
//Reading File Content and storing it to a StringBuilder variable ( skips lineToRemove)
StringBuilder sb = new StringBuilder();
try (Scanner sc = new Scanner(f)) {
String currentLine;
while(sc.hasNext()){
currentLine = sc.nextLine();
if(currentLine.equals(lineToRemove)){
continue; //skips lineToRemove
}
sb.append(currentLine).append("\n");
}
}
//Delete File Content
PrintWriter pw = new PrintWriter(f);
pw.close();
BufferedWriter writer = new BufferedWriter(new FileWriter(f, true));
writer.append(sb.toString());
writer.close();
}
Super simple method using maven/gradle+groovy.
public void deleteConfig(String text) {
File config = new File("/the/path/config.txt")
def lines = config.readLines()
lines.remove(text);
config.write("")
lines.each {line -> {
config.append(line+"\n")
}}
}
public static void deleteLine(String line, String filePath) {
File file = new File(filePath);
File file2 = new File(file.getParent() + "\\temp" + file.getName());
PrintWriter pw = null;
Scanner read = null;
FileInputStream fis = null;
FileOutputStream fos = null;
FileChannel src = null;
FileChannel dest = null;
try {
pw = new PrintWriter(file2);
read = new Scanner(file);
while (read.hasNextLine()) {
String currline = read.nextLine();
if (line.equalsIgnoreCase(currline)) {
continue;
} else {
pw.println(currline);
}
}
pw.flush();
fis = new FileInputStream(file2);
src = fis.getChannel();
fos = new FileOutputStream(file);
dest = fos.getChannel();
dest.transferFrom(src, 0, src.size());
} catch (IOException e) {
e.printStackTrace();
} finally {
pw.close();
read.close();
try {
fis.close();
fos.close();
src.close();
dest.close();
} catch (IOException e) {
e.printStackTrace();
}
if (file2.delete()) {
System.out.println("File is deleted");
} else {
System.out.println("Error occured! File: " + file2.getName() + " is not deleted!");
}
}
}
package com.ncs.cache;
import java.io.BufferedReader;
import java.io.FileReader;
import java.io.File;
import java.io.FileWriter;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.PrintWriter;
public class FileUtil {
public void removeLineFromFile(String file, String lineToRemove) {
try {
File inFile = new File(file);
if (!inFile.isFile()) {
System.out.println("Parameter is not an existing file");
return;
}
// Construct the new file that will later be renamed to the original
// filename.
File tempFile = new File(inFile.getAbsolutePath() + ".tmp");
BufferedReader br = new BufferedReader(new FileReader(file));
PrintWriter pw = new PrintWriter(new FileWriter(tempFile));
String line = null;
// Read from the original file and write to the new
// unless content matches data to be removed.
while ((line = br.readLine()) != null) {
if (!line.trim().equals(lineToRemove)) {
pw.println(line);
pw.flush();
}
}
pw.close();
br.close();
// Delete the original file
if (!inFile.delete()) {
System.out.println("Could not delete file");
return;
}
// Rename the new file to the filename the original file had.
if (!tempFile.renameTo(inFile))
System.out.println("Could not rename file");
} catch (FileNotFoundException ex) {
ex.printStackTrace();
} catch (IOException ex) {
ex.printStackTrace();
}
}
public static void main(String[] args) {
FileUtil util = new FileUtil();
util.removeLineFromFile("test.txt", "bbbbb");
}
}
src : http://www.javadb.com/remove-a-line-from-a-text-file/
This solution requires the Apache Commons IO library to be added to the build path. It works by reading the entire file and writing each line back but only if the search term is not contained.
public static void removeLineFromFile(File targetFile, String searchTerm)
throws IOException
{
StringBuffer fileContents = new StringBuffer(
FileUtils.readFileToString(targetFile));
String[] fileContentLines = fileContents.toString().split(
System.lineSeparator());
emptyFile(targetFile);
fileContents = new StringBuffer();
for (int fileContentLinesIndex = 0; fileContentLinesIndex < fileContentLines.length; fileContentLinesIndex++)
{
if (fileContentLines[fileContentLinesIndex].contains(searchTerm))
{
continue;
}
fileContents.append(fileContentLines[fileContentLinesIndex] + System.lineSeparator());
}
FileUtils.writeStringToFile(targetFile, fileContents.toString().trim());
}
private static void emptyFile(File targetFile) throws FileNotFoundException,
IOException
{
RandomAccessFile randomAccessFile = new RandomAccessFile(targetFile, "rw");
randomAccessFile.setLength(0);
randomAccessFile.close();
}
I refactored the solution that Narek had to create (according to me) a slightly more efficient and easy to understand code. I used embedded Automatic Resource Management, a recent feature in Java and used a Scanner class which according to me is more easier to understand and use.
Here is the code with edited Comments:
public class RemoveLineInFile {
private static File file;
public static void main(String[] args) {
//create a new File
file = new File("hello.txt");
//takes in String that you want to get rid off
removeLineFromFile("Hello");
}
public static void removeLineFromFile(String lineToRemove) {
//if file does not exist, a file is created
if (!file.exists()) {
try {
file.createNewFile();
} catch (IOException e) {
System.out.println("File "+file.getName()+" not created successfully");
}
}
// Construct the new temporary file that will later be renamed to the original
// filename.
File tempFile = new File(file.getAbsolutePath() + ".tmp");
//Two Embedded Automatic Resource Managers used
// to effectivey handle IO Responses
try(Scanner scanner = new Scanner(file)) {
try (PrintWriter pw = new PrintWriter(new FileWriter(tempFile))) {
//a declaration of a String Line Which Will Be assigned Later
String line;
// Read from the original file and write to the new
// unless content matches data to be removed.
while (scanner.hasNextLine()) {
line = scanner.nextLine();
if (!line.trim().equals(lineToRemove)) {
pw.println(line);
pw.flush();
}
}
// Delete the original file
if (!file.delete()) {
System.out.println("Could not delete file");
return;
}
// Rename the new file to the filename the original file had.
if (!tempFile.renameTo(file))
System.out.println("Could not rename file");
}
}
catch (IOException e)
{
System.out.println("IO Exception Occurred");
}
}
}
Try this:
public static void main(String[] args) throws IOException {
File file = new File("file.csv");
CSVReader csvFileReader = new CSVReader(new FileReader(file));
List<String[]> list = csvFileReader.readAll();
for (int i = 0; i < list.size(); i++) {
String[] filter = list.get(i);
if (filter[0].equalsIgnoreCase("bbb")) {
list.remove(i);
}
}
csvFileReader.close();
CSVWriter csvOutput = new CSVWriter(new FileWriter(file));
csvOutput.writeAll(list);
csvOutput.flush();
csvOutput.close();
}
Old question, but an easy way is to:
Iterate through file, adding each line to an new array list
iterate through the array, find matching String, then call the remove method.
iterate through array again, printing each line to the file, boolean for append should be false, which basically replaces the file
This solution uses a RandomAccessFile to only cache the portion of the file subsequent to the string to remove. It scans until it finds the String you want to remove. Then it copies all of the data after the found string, then writes it over the found string, and everything after. Last, it truncates the file size to remove the excess data.
public static long scanForString(String text, File file) throws IOException {
if (text.isEmpty())
return file.exists() ? 0 : -1;
// First of all, get a byte array off of this string:
byte[] bytes = text.getBytes(/* StandardCharsets.your_charset */);
// Next, search the file for the byte array.
try (DataInputStream dis = new DataInputStream(new FileInputStream(file))) {
List<Integer> matches = new LinkedList<>();
for (long pos = 0; pos < file.length(); pos++) {
byte bite = dis.readByte();
for (int i = 0; i < matches.size(); i++) {
Integer m = matches.get(i);
if (bytes[m] != bite)
matches.remove(i--);
else if (++m == bytes.length)
return pos - m + 1;
else
matches.set(i, m);
}
if (bytes[0] == bite)
matches.add(1);
}
}
return -1;
}
public static void remove(String text, File file) throws IOException {
try (RandomAccessFile rafile = new RandomAccessFile(file, "rw");) {
long scanForString = scanForString(text, file);
if (scanForString == -1) {
System.out.println("String not found.");
return;
}
long remainderStartPos = scanForString + text.getBytes().length;
rafile.seek(remainderStartPos);
int remainderSize = (int) (rafile.length() - rafile.getFilePointer());
byte[] bytes = new byte[remainderSize];
rafile.read(bytes);
rafile.seek(scanForString);
rafile.write(bytes);
rafile.setLength(rafile.length() - (text.length()));
}
}
Usage:
File Contents: ABCDEFGHIJKLMNOPQRSTUVWXYZ
Method Call: remove("ABC", new File("Drive:/Path/File.extension"));
Resulting Contents: DEFGHIJKLMNOPQRSTUVWXYZ
This solution could easily be modified to remove with a certain, specifiable cacheSize, if memory is a concern. This would just involve iterating over the rest of the file to continually replace portions of size, cacheSize. Regardless, this solution is generally much better than caching an entire file in memory, or copying it to a temporary directory, etc.
I'm creating a program to remove doctors from an arrayList that is utilising a queue. This works the first time perfectly however, the second time it's duplicating the data inside the text file. How can I solve this?
/**
*
* #throws Exception
*/
public void writeArrayListToFile() throws Exception {
String path = "src/assignment1com327ccab/DoctorRecordsFile.txt";
OutputStreamWriter os = new OutputStreamWriter(new FileOutputStream(path));
BufferedWriter br = new BufferedWriter(os);
PrintWriter out = new PrintWriter(br);
DoctorNode temp; //create a temporary doctorNode object
temp = end; //temp is equal to the end of the queue
//try this while temp is not equal to null (queue is not empty)
StringBuilder doctor = new StringBuilder();
while (temp != null) {
{
doctor.append(temp.toStringFile());
doctor.append("\n");
//temp is equal to temp.getNext doctor to get the next doctor to count
temp = temp.getNext();
}
}
System.out.println("Finished list");
System.out.println("Doctors is : " + doctor.toString());
out.println(doctor.toString());
System.out.println("Done");
br.newLine();
br.close();
}
This is not 100% solution but I think it will give you the right directions. I don't want to do 100% work for you :)
In my comment I said
Read file content
Store it in variable
Remove file
Remove doctors from variable
Write variables to new file
So, to read file content we would use something file this (if it's txt file):
public static String read(File file) throws FileNotFoundException {
BufferedReader br = null;
try {
br = new BufferedReader(new FileReader(file.getAbsoluteFile()));
StringBuilder sb = new StringBuilder();
String line = br.readLine();
while (line != null) {
sb.append(line);
line = br.readLine();
if (line != null) sb.append(System.lineSeparator());
}
String everything = sb.toString();
return everything;
} catch (IOException e) {
e.printStackTrace();
} finally {
try {
if (br != null) br.close();
} catch (IOException e) {
e.printStackTrace();
}
}
return null;
}
This method returns String as file content. We can store it in a variable like this:
String fileContent = MyClass.read(new File("path to file"));
Next step would be to remove our file. Since we have it in memory, and we don't want duplicate values...
file.delete();
Now we should remove our doctors from fileContent. It's basic String operations. I would recommend using method replace() or replaceAll().
And after the String manipulation, just write fileContent to our file again.
File file = new File("the same path");
file.createNewFile();
Writer out = new BufferedWriter(new OutputStreamWriter(
new FileOutputStream(file, true), "UTF-8"));
out.write(fileContent);
out.flush();
out.close();
I'm new to coding in java. Can anyone help me with my codes? I'm currently making a program where you input a string in a jTextArea, and if the input word(s) matches the one in the text file then it will then do something.
For example: I input the word 'Hey' then it will print something like "Hello" when the input word matches from the text file.
I hope you understand what I mean.
Here's my code:
String line;
String yo;
yo = jTextArea2.getText();
try (
InputStream fis = new FileInputStream("readme.txt");
InputStreamReader isr = new InputStreamReader(fis, Charset.forName("UTF-8"));
BufferedReader br = new BufferedReader(isr);
)
{
while ((line = br.readLine()) != null) {
if (yo.equalsIgnoreCase(line)) {
System.out.print("Hello");
}
}
} catch (IOException ex) {
Logger.getLogger(ArfArf.class.getName()).log(Level.SEVERE, null, ex);
}
You can not use equals for line because a line contain many words. You have to modify it to search the index of the word in a line.
try (InputStream fis = new FileInputStream("readme.txt");
InputStreamReader isr = new InputStreamReader(fis, Charset.forName("UTF-8"));
BufferedReader br = new BufferedReader(isr);) {
while ((line = br.readLine()) != null) {
line = line.toLowerCase();
yo = yo.toLowerCase();
if (line.indexOf(yo) != -1) {
System.out.print("Hello");
}
line = br.readLine();
}
} catch (IOException ex) {
}
since you are new in java , I would suggest you to take some time to study java 8 which enable to write more clean codes. below is the solution write in java 8, hope can give a kind of help
String yo = jTextArea2.getText();
//read file into stream,
try (java.util.stream.Stream<String> stream = Files.lines(Paths.get("readme.txt"))) {
List<String> matchLines = stream.filter((line) -> line.indexOf(yo) > -1).collect(Collectors.toList()); // find all the lines contain the text
matchLines.forEach(System.out::println); // print out all the lines contain yo
} catch (IOException e) {
e.printStackTrace();
}
import java.io.File;
import java.io.FileNotFoundException;
import java.util.Scanner;
public class WordFinder {
public static void main(String[] args) throws FileNotFoundException {
String yo = "some word";
Scanner scanner = new Scanner(new File("input.txt")); // path to file
while (scanner.hasNextLine()) {
if (scanner.nextLine().contains(yo)) { // check if line has your finding word
System.out.println("Hello");
}
}
}
}
This question already has answers here:
Reading and Writing to a .txt file in Java
(4 answers)
Closed 6 years ago.
This is my code, I can't make it work properly, it gets just the last line from 3 lines total from the first text file and capitalize only that, and I cant figure out why
import java.util.Scanner;
import java.io.*;
public class AllCapitals {
public static void main(String[] args) {
String readLine;
String inFilePath = "/home/file.txt";
String outFilePath = "/home/newFile.txt";
try (BufferedReader bufferedReader = new BufferedReader(new FileReader(inFilePath))) {
while ((readLine = bufferedReader.readLine()) != null) {
readLine.toUpperCase();
String upperC = readLine.toUpperCase();
System.out.println(upperC);
try (Writer writer = new BufferedWriter(new OutputStreamWriter(
new FileOutputStream(outFilePath), "utf-8"))) {
writer.write(upperC);
}
}
} catch (IOException e) {
System.out.println("Error.");
e.printStackTrace();
}
}
}
EDIT: Forgot to say the functionallity.
I need to read 3 lines from a normal text file that goes like that
Hello.
How are you ?
Good, thank you !
And the output should be in all CAPS, but I get only the last line "GOOD THANK YOU"
That's because you recreate the output file in each iteration while reading lines from the first.
Create the output file once before you start reading, for example:
try (BufferedReader bufferedReader = new BufferedReader(new FileReader(inFilePath));
Writer writer = new BufferedWriter(new OutputStreamWriter(new FileOutputStream(outFilePath), "utf-8"))
) {
while ((readLine = bufferedReader.readLine()) != null) {
String upperC = readLine.toUpperCase();
System.out.println(upperC);
writer.write(upperC);
writer.write(System.lineSeparator());
}
} catch (IOException e) {
System.out.println("Error.");
e.printStackTrace();
}
Some other improvements:
Removed a pointless line readLine.toUpperCase(); that did nothing
Add a linebreak for each line, otherwise all the uppercased content would be on the same line
I have few text files. Each text file contains some path and/or the reference of some other file.
File1
#file#>D:/FilePath/File2.txt
Mod1>/home/admin1/mod1
Mod2>/home/admin1/mod2
File2
Mod3>/home/admin1/mod3
Mod4>/home/admin1/mod4
All I want is, copy all the paths Mod1, Mod2, Mod3, Mod4 in another text file by supplying only File1.txt as input to my java program.
What I have done till now?
public void readTextFile(String fileName){
try {
br = new BufferedReader(new FileReader(new File(fileName)));
String line = br.readLine();
while(line!=null){
if(line.startsWith("#file#>")){
String string[] = line.split(">");
readTextFile(string[1]);
}
else if(line.contains(">")){
String string[] = line.split(">");
svnLinks.put(string[0], string[1]);
}
line=br.readLine();
}
} catch (Exception e) {
e.printStackTrace();
}
}
Currently my code reads the contents of File2.txt only, control does not come back to File1.txt.
Please ask if more inputs are required.
First of all you are jumping to another file without closing the current reader and when you come back you lose the cursor. Read one file first and then write all its contents that match to another file. Close the current reader (Don't close the writer) and then open the next file to read and so on.
Seems pretty simple. You need to write your file once your svnLinks Map is populated, assuming your present code works (haven't seen anything too weird in it).
So, once the Map is populated, you could use something along the lines of:
File newFile = new File("myPath/myNewFile.txt");
// TODO check file can be written
// TODO check file exists or create
FileOutputStream fos = null;
OutputStreamWriter osw = null;
BufferedWriter bw = null;
try {
fos = new FileOutputStream(newFile);
osw = new OutputStreamWriter(fos);
bw = new BufferedWriter(osw);
for (String key: svnLinks.keySet()) {
bw.write(key.concat(" my separator ").concat(svnLinks.get(key)).concat("myNewLine"));
}
}
catch (Throwable t) {
// TODO handle more gracefully
t.printStackTrace();
if (bw != null) {
try {
bw.close();
}
catch (Throwable t) {
t.printStackTrace();
}
}
Here is an non-recursive implementation of your method :
public static void readTextFile(String fileName) throws IOException {
LinkedList<String> list = new LinkedList<String>();
list.add(fileName);
while (!list.isEmpty()) {
BufferedReader br = null;
try {
br = new BufferedReader(new FileReader(new File(list.pop())));
String line;
while ((line = br.readLine()) != null) {
if (line.startsWith("#file#>")) {
String string[] = line.split(">");
list.add(string[1]);
} else if (line.contains(">")) {
String string[] = line.split(">");
svnLinks.put(string[0], string[1]);
}
}
} catch (Exception e) {
e.printStackTrace();
} finally {
br.close();
}
}
}
Just used a LinkedList to maintain the order. I suggest you to add some counter if you to limit the reading of files to a certain number(depth). eg:
while (!list.isEmpty() && readCount < 10 )
This will eliminate the chance of running the code to infinity(in case of circular reference).