I have a java web application that I'm running with tomcat. This application has to read from a couple of text files, and currently I have them sitting in tomcat's bin, since that is the working directory.
How would I get tomcat to look elsewhere for the textfiles, without relying on absolute paths? ideally, I'd like to put the files in WEB-INF/
If you put the files in WEB-INF/classes or WEB-INF/lib, then they'll be on the classpath and you can read them using
InputStream in = this.getClass().getClassLoader()
.getResourceAsStream("Yourfilename.abc");
Related
In my web application I have to send email to set of predefined users like finance#xyz.example, so I wish to add that to a .properties file and access it when required. Is this a correct procedure, if so then where should I place this file? I am using Netbeans IDE which is having two separate folders for source and JSP files.
It's your choice. There are basically three ways in a Java web application archive (WAR):
1. Put it in classpath
So that you can load it by ClassLoader#getResourceAsStream() with a classpath-relative path:
ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
InputStream input = classLoader.getResourceAsStream("foo.properties");
// ...
Properties properties = new Properties();
properties.load(input);
Here foo.properties is supposed to be placed in one of the roots which are covered by the default classpath of a webapp, e.g. webapp's /WEB-INF/lib and /WEB-INF/classes, server's /lib, or JDK/JRE's /lib. If the propertiesfile is webapp-specific, best is to place it in /WEB-INF/classes. If you're developing a standard WAR project in an IDE, drop it in src folder (the project's source folder). If you're using a Maven project, drop it in /main/resources folder.
You can alternatively also put it somewhere outside the default classpath and add its path to the classpath of the appserver. In for example Tomcat you can configure it as shared.loader property of Tomcat/conf/catalina.properties.
If you have placed the foo.properties it in a Java package structure like com.example, then you need to load it as below
ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
InputStream input = classLoader.getResourceAsStream("com/example/foo.properties");
// ...
Note that this path of a context class loader should not start with a /. Only when you're using a "relative" class loader such as SomeClass.class.getClassLoader(), then you indeed need to start it with a /.
ClassLoader classLoader = getClass().getClassLoader();
InputStream input = classLoader.getResourceAsStream("/com/example/foo.properties");
// ...
However, the visibility of the properties file depends then on the class loader in question. It's only visible to the same class loader as the one which loaded the class. So, if the class is loaded by e.g. server common classloader instead of webapp classloader, and the properties file is inside webapp itself, then it's invisible. The context class loader is your safest bet so you can place the properties file "everywhere" in the classpath and/or you intend to be able to override a server-provided one from the webapp on.
2. Put it in webcontent
So that you can load it by ServletContext#getResourceAsStream() with a webcontent-relative path:
InputStream input = getServletContext().getResourceAsStream("/WEB-INF/foo.properties");
// ...
Note that I have demonstrated to place the file in /WEB-INF folder, otherwise it would have been public accessible by any webbrowser. Also note that the ServletContext is in any HttpServlet class just accessible by the inherited GenericServlet#getServletContext() and in Filter by FilterConfig#getServletContext(). In case you're not in a servlet class, it's usually just injectable via #Inject.
3. Put it in local disk file system
So that you can load it the usual java.io way with an absolute local disk file system path:
InputStream input = new FileInputStream("/absolute/path/to/foo.properties");
// ...
Note the importance of using an absolute path. Relative local disk file system paths are an absolute no-go in a Java EE web application. See also the first "See also" link below.
Which to choose?
Just weigh the advantages/disadvantages in your own opinion of maintainability.
If the properties files are "static" and never needs to change during runtime, then you could keep them in the WAR.
If you prefer being able to edit properties files from outside the web application without the need to rebuild and redeploy the WAR every time, then put it in the classpath outside the project (if necessary add the directory to the classpath).
If you prefer being able to edit properties files programmatically from inside the web application using Properties#store() method, put it outside the web application. As the Properties#store() requires a Writer, you can't go around using a disk file system path. That path can in turn be passed to the web application as a VM argument or system property. As a precaution, never use getRealPath(). All changes in deploy folder will get lost on a redeploy for the simple reason that the changes are not reflected back in original WAR file.
See also:
getResourceAsStream() vs FileInputStream
Adding a directory to tomcat classpath
Accessing properties file in a JSF application programmatically
Word of warning: if you put config files in your WEB-INF/classes folder, and your IDE, say Eclipse, does a clean/rebuild, it will nuke your conf files unless they were in the Java source directory. BalusC's great answer alludes to that in option 1 but I wanted to add emphasis.
I learned the hard way that if you "copy" a web project in Eclipse, it does a clean/rebuild from any source folders. In my case I had added a "linked source dir" from our POJO java library, it would compile to the WEB-INF/classes folder. Doing a clean/rebuild in that project (not the web app project) caused the same problem.
I thought about putting my confs in the POJO src folder, but these confs are all for 3rd party libs (like Quartz or URLRewrite) that are in the WEB-INF/lib folder, so that didn't make sense. I plan to test putting it in the web projects "src" folder when i get around to it, but that folder is currently empty and having conf files in it seems inelegant.
So I vote for putting conf files in WEB-INF/commonConfFolder/filename.properties, next to the classes folder, which is Balus option 2.
Ex: In web.xml file the tag
<context-param>
<param-name>chatpropertyfile</param-name>
<!-- Name of the chat properties file. It contains the name and description of rooms.-->
<param-value>chat.properties</param-value>
</context-param>
And chat.properties you can declare your properties like this
For Ex :
Jsp = Discussion about JSP can be made here.
Java = Talk about java and related technologies like J2EE.
ASP = Discuss about Active Server Pages related technologies like VBScript and JScript etc.
Web_Designing = Any discussion related to HTML, JavaScript, DHTML etc.
StartUp = Startup chat room. Chatter is added to this after he logs in.
It just needs to be in the classpath (aka make sure it ends up under /WEB-INF/classes in the .war as part of the build).
You can you with your source folder so whenever you build, those files are automatically copied to the classes directory.
Instead of using properties file, use XML file.
If the data is too small, you can even use web.xml for accessing the properties.
Please note that any of these approach will require app server restart for changes to be reflected.
Assume your code is looking for the file say app.properties. Copy this file to any dir and add this dir to classpath, by creating a setenv.sh in the bin dir of tomcat.
In your setenv.sh of tomcat( if this file is not existing, create one , tomcat will load this setenv.sh file.
#!/bin/sh
CLASSPATH="$CLASSPATH:/home/user/config_my_prod/"
You should not have your properties files in ./webapps//WEB-INF/classes/app.properties
Tomcat class loader will override the with the one from WEB-INF/classes/
A good read:
https://tomcat.apache.org/tomcat-8.0-doc/class-loader-howto.html
In my web application I have to send email to set of predefined users like finance#xyz.example, so I wish to add that to a .properties file and access it when required. Is this a correct procedure, if so then where should I place this file? I am using Netbeans IDE which is having two separate folders for source and JSP files.
It's your choice. There are basically three ways in a Java web application archive (WAR):
1. Put it in classpath
So that you can load it by ClassLoader#getResourceAsStream() with a classpath-relative path:
ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
InputStream input = classLoader.getResourceAsStream("foo.properties");
// ...
Properties properties = new Properties();
properties.load(input);
Here foo.properties is supposed to be placed in one of the roots which are covered by the default classpath of a webapp, e.g. webapp's /WEB-INF/lib and /WEB-INF/classes, server's /lib, or JDK/JRE's /lib. If the propertiesfile is webapp-specific, best is to place it in /WEB-INF/classes. If you're developing a standard WAR project in an IDE, drop it in src folder (the project's source folder). If you're using a Maven project, drop it in /main/resources folder.
You can alternatively also put it somewhere outside the default classpath and add its path to the classpath of the appserver. In for example Tomcat you can configure it as shared.loader property of Tomcat/conf/catalina.properties.
If you have placed the foo.properties it in a Java package structure like com.example, then you need to load it as below
ClassLoader classLoader = Thread.currentThread().getContextClassLoader();
InputStream input = classLoader.getResourceAsStream("com/example/foo.properties");
// ...
Note that this path of a context class loader should not start with a /. Only when you're using a "relative" class loader such as SomeClass.class.getClassLoader(), then you indeed need to start it with a /.
ClassLoader classLoader = getClass().getClassLoader();
InputStream input = classLoader.getResourceAsStream("/com/example/foo.properties");
// ...
However, the visibility of the properties file depends then on the class loader in question. It's only visible to the same class loader as the one which loaded the class. So, if the class is loaded by e.g. server common classloader instead of webapp classloader, and the properties file is inside webapp itself, then it's invisible. The context class loader is your safest bet so you can place the properties file "everywhere" in the classpath and/or you intend to be able to override a server-provided one from the webapp on.
2. Put it in webcontent
So that you can load it by ServletContext#getResourceAsStream() with a webcontent-relative path:
InputStream input = getServletContext().getResourceAsStream("/WEB-INF/foo.properties");
// ...
Note that I have demonstrated to place the file in /WEB-INF folder, otherwise it would have been public accessible by any webbrowser. Also note that the ServletContext is in any HttpServlet class just accessible by the inherited GenericServlet#getServletContext() and in Filter by FilterConfig#getServletContext(). In case you're not in a servlet class, it's usually just injectable via #Inject.
3. Put it in local disk file system
So that you can load it the usual java.io way with an absolute local disk file system path:
InputStream input = new FileInputStream("/absolute/path/to/foo.properties");
// ...
Note the importance of using an absolute path. Relative local disk file system paths are an absolute no-go in a Java EE web application. See also the first "See also" link below.
Which to choose?
Just weigh the advantages/disadvantages in your own opinion of maintainability.
If the properties files are "static" and never needs to change during runtime, then you could keep them in the WAR.
If you prefer being able to edit properties files from outside the web application without the need to rebuild and redeploy the WAR every time, then put it in the classpath outside the project (if necessary add the directory to the classpath).
If you prefer being able to edit properties files programmatically from inside the web application using Properties#store() method, put it outside the web application. As the Properties#store() requires a Writer, you can't go around using a disk file system path. That path can in turn be passed to the web application as a VM argument or system property. As a precaution, never use getRealPath(). All changes in deploy folder will get lost on a redeploy for the simple reason that the changes are not reflected back in original WAR file.
See also:
getResourceAsStream() vs FileInputStream
Adding a directory to tomcat classpath
Accessing properties file in a JSF application programmatically
Word of warning: if you put config files in your WEB-INF/classes folder, and your IDE, say Eclipse, does a clean/rebuild, it will nuke your conf files unless they were in the Java source directory. BalusC's great answer alludes to that in option 1 but I wanted to add emphasis.
I learned the hard way that if you "copy" a web project in Eclipse, it does a clean/rebuild from any source folders. In my case I had added a "linked source dir" from our POJO java library, it would compile to the WEB-INF/classes folder. Doing a clean/rebuild in that project (not the web app project) caused the same problem.
I thought about putting my confs in the POJO src folder, but these confs are all for 3rd party libs (like Quartz or URLRewrite) that are in the WEB-INF/lib folder, so that didn't make sense. I plan to test putting it in the web projects "src" folder when i get around to it, but that folder is currently empty and having conf files in it seems inelegant.
So I vote for putting conf files in WEB-INF/commonConfFolder/filename.properties, next to the classes folder, which is Balus option 2.
Ex: In web.xml file the tag
<context-param>
<param-name>chatpropertyfile</param-name>
<!-- Name of the chat properties file. It contains the name and description of rooms.-->
<param-value>chat.properties</param-value>
</context-param>
And chat.properties you can declare your properties like this
For Ex :
Jsp = Discussion about JSP can be made here.
Java = Talk about java and related technologies like J2EE.
ASP = Discuss about Active Server Pages related technologies like VBScript and JScript etc.
Web_Designing = Any discussion related to HTML, JavaScript, DHTML etc.
StartUp = Startup chat room. Chatter is added to this after he logs in.
It just needs to be in the classpath (aka make sure it ends up under /WEB-INF/classes in the .war as part of the build).
You can you with your source folder so whenever you build, those files are automatically copied to the classes directory.
Instead of using properties file, use XML file.
If the data is too small, you can even use web.xml for accessing the properties.
Please note that any of these approach will require app server restart for changes to be reflected.
Assume your code is looking for the file say app.properties. Copy this file to any dir and add this dir to classpath, by creating a setenv.sh in the bin dir of tomcat.
In your setenv.sh of tomcat( if this file is not existing, create one , tomcat will load this setenv.sh file.
#!/bin/sh
CLASSPATH="$CLASSPATH:/home/user/config_my_prod/"
You should not have your properties files in ./webapps//WEB-INF/classes/app.properties
Tomcat class loader will override the with the one from WEB-INF/classes/
A good read:
https://tomcat.apache.org/tomcat-8.0-doc/class-loader-howto.html
My GWT project runs nicely in developement mode but when I put it on server it can't find an XML file.
My file is in src/main/webapp and when I do mvn install it shows up in target/<projectname>-1.0-SNAPSHOT
I try to access the file like this:
FileInputStream inputStream = new FileInputStream("testobj.xml");
and it throws
java.io.FileNotFoundException: testobj.xml (The system cannot find the file specified)
really puzzled by it .. haven't found any useful links on this either.
FileInputStream inputStream = new FileInputStream("testobj.xml");
To make that a valid path you have to place the xml in same folder where your class file is there.
And the good practice is that put the file in WEB-INF folder and access the path like
getSevletContext.getRealPath("/WEB-INF/resources/testobj.xml");
You might placed the file in src and it is taking from system path. Once you compile the project, your java files converts to class files and places in WEB-INF/classes folder, where the context has been changed.
To maintain the consistency for both in development mode and live environment access files from WEB-INF folder with real path.
It can be seen in development because testobj.xml is able to be found on the path in development. After your project is packaged and built it needs to be in your WEB-INF folder in the war. It is generally good practices to put your resources in src/main/resources as well, not the root folder.
Whatever you are using for your build will need to copy your resources to WEB-INF when creating a war. If you are using maven see this thread for how to accomplish this: Maven: how to get a war package with resources copied in WEB-INF?
FileInputStream inputStream = new FileInputStream("testobj.xml");
This line tries to access "testobj.xml" in the process's current directory. When you run this within a web app, it'll look for the file within the application server process's current directory. This directory could be anything, and it's unlikely that the file will be there.
The normal way to read resources packaged with the web app is to use the web app's ClassLoader:
InputStream is = getClass().getClassLoader().getResourceAsStream("resources/testobj.xml");
This will automatically search the web application's deployment files for the named file. See this question for more discussion.
I'm trying to read from a text file in Netbeans. In the top level of my project directory I have foo.txt. Then in my code I have:
File file = new File("foo.txt");
It throws a FileNotFoundException, however. It's a Java web application using Spring and Tomcat, but I'm not sure if those details matter since I'm running the whole thing inside Netbeans. Basically, I just want to know where I need to put the file so Netbeans will read it.
Update - good call guys, it's looking in Tomcat's bin directory. Now this may be a stupid question but, how would I go about getting it to look in my top level project directory? I feel like dropping text files into tomcat's bin would be innapropriate.
You can try printing the absolute path of the File object to see where it is looking on the filesystem.
System.out.println(file.getAbsolutePath());
I would use the following to figure out where to put the file:
System.out.println(System.getProperty("user.dir"));
To directly answer your question, If you're running an application on Tomcat, files will be opened from the current working directory. That will likely be the bin/ folder in your tomcat directory.
You can find out for sure where your program is looking by examining the result of file.getAbsolutePath().
However, for web applications, I would suggest putting files you need to read in your classpath so you don't have to depend on a certain file structure when you deploy your web application.
try System.getProperty("user.dir") to get current working directory
I have a Java web application. Inside the WAR I have a folder containing configuration files for the application. I need to know the path of the folder in order to load the files at runtime.
I also need the solution to work in Tomcat and in WebSphere.
Thanks.
I would suggest placing the files under WEB-INF/classes and simplying loading them from the classpath, not from the filesystem. This way, the path is always the same.
You can use something like:
InputStream stream = Thread.currentThread().getContextClassLoader().getResourceAsStream("path");