Many of the times our Domino http is making me tense.
Because of the various reasons, Please tell the proper solution for
this...
I started my both domino and Notes. After sometime I restarted my domino server. Now my nhttp is not getting started on my server. It is telling http is already running. But I have checked my Task manager and found that port 80 is occupied by nhttp. After I have end that process it is again restarted. Why is this happening?
Some of java programs run on server. When the JVM may crashed. That time I have no choice except restarting the server. Pleae tell is their any way to restart JVM. or Kill the nhttp.
Make sure the IIS-service isn't started, the HTTP-task will take and hold port 80.
Related
This is my first time asking a question on Stack Overflow. I recently configured an Ubuntu 16.04 virtual private server to host a web application. I run ngnix on a Tomcat server that reads and writes to a MySQL database. The application runs fine except for the fact that Tomcat restarts itself once in a while which results in a 500 error that stems from a "broken-pipe" when anyone tries to login (i.e. make a connection to the database).
I will post an image of the 500 next time it happens. I went into my vps and looked at my Tomcat restart message. This is what I see: Tomcat status message.
I also did a little diving into the Tomcat logs and this is a log file that corresponds with that restart time: Tomcat log file
I did some research to try and solve this myself, but with no success. I believe that the exit=143 is the process being terminated by another program or the system itself. I also have done some moving of the mysql-connector-java.jar. I read that it should be located in the Tomcat/lib directory and not in the WEB-INF of the web application. Perhaps I need to configure other settings.
Any help or any direction would be much appreciated. I've fought this issue for a week with having learned much, but accomplished little.
Thanks
Look at the timeline. It starts at 19:49:23.766 in the Tomcat log with this message:
A valid shutdown command was received via the shutdown port. Stopping the Server instance.
Exit code 143 is a result of that shutdown and doesn't indicate anything.
The question you need answered is: Who send that shutdown command, and why?
On a side note: The earlier messages indicates that Tomcat lost connection to the database, and that you didn't configure a validation query. You should always configure that, since database connections in the connection pool will go stale, and that needs to be detected.
Theory: Do you have some monitoring service running that tests your application being up? Does that monitoring detect a timed-out database connection, classify that as a hung webapp and auto-restart Tomcat?
While I don't think I am able to see to the core of the problem you have with your overall setup given the small excerpt of your log files, one thing strikes the eye. In the Tomcat log, there is the line
A valid shutdown command was received via the shutdown port. Stopping the server instance.
This explains why the server was restarted. Someone (some external process, a malicious attacker, script, or whatever. Could be anything depending on the setup of your server) sent a shutdown command to Tomcat's shutdown port (8005 by default) which made the Tomcat shut down.
Refer to OWASP's recommendations for securing a Tomcat server instance for fixing this possible security whole.
Regarding the ostensible Hibernate problems you have, I don't get enough information from your logs to make a useful statement. But you can leave the MySQL jar in Tomcat/lib, since this is not the root cause of your problem.
I have a project in eclipse to retrieve data from a certain website. As there is too much data to be retrieved I have to keep the code running overnight. I get ajave.net.UnknownHostException after sometime. The code runs without any problem for a long time and only later the UnknownHostexception occurs. Any solution as to why this is happening?
You can only have the mac address of your server where the war is being deployed, Check it here how to get the MAC address
I have seen this error in one of my projects before. Till Java 1.5, JVM used to cache the DNS entry and did not honor the TTL values. If for some reason, the DNS entry was modified (usually the case with Akamai or other CDN networks), and the IP you were going to before is no longer available, you may hit upon this error.
Some info on this behavior is available at http://www.rgagnon.com/javadetails/java-0445.html and http://blog.andrewbeacock.com/2006/12/warning-java-caches-dns-to-ip-address.html.
What you may try is to run a iptrace when it works fine and when it starts failing from the same machine - if the IP has changed, you are hitting this scenario.
My guess is that your internet connect is probably breaking. Do you have any other logs to verify this?
I have an application runs in jboss 4.2.2 server with jdk 1.6. The program has bug in it that it doesn't set http connection timeout when it opens its the connection. So when the third party side has issues the connection is hanged forever which makes the thread hangs as well. And soon we are running out of thread. However, due to the release cycle we can't put a fix in immediately. I was wondering there is a way to terminate a network connection from outside the jvm? So the thread can be release back to the thread pool? I potentially has a lot of connection open to the same third party site so it is nice to figure out the problem connection and just kill that one.
Thanks,
While searching for a question of my own, I came across what seems to be a great tutorial on how to externally kill a thread.
http://www.rhcedan.com/2010/06/22/killing-a-java-thread/
You can grep the output of netstat and kill the connection using tcpkill, and run this using cron.
However this cannot be more than a very temporary solution.
This ServerFault Q & A may be relevant. It explains that tcpkill will only work if there is active traffic on the connection.
(This is because ... apparently ... tcpkill works by sending a TCP RESET packet. In order for this to work it needs to know the correct sequence number, and it can only figure this out by examining other packets for the session.)
Some background information.
- Running a java server on localhost
- Running a webserver on localhost
I would like a webpage to have a 'server status' feature which lets me know whether the server is running or not. My question, what is the best way to do this?
When I launch the java server, I write a flag in the database to signify that it is running.
Javascript/PHP sockets to try and bind on the same port. (Not sure if possible yet)
Shell script to locate the program in the task list.
Thanks!
When I launch the java server, I write
a flag in the database to signify that
it is running.
would not be of much help if the server should segfault.
Maybe have a look at http://mmonit.com/monit/
what is pretty much what you are looking for
I suspect the simplest method is simply for your web service (backend) to try and connect to the port that your server is running on, and provide an automatically refreshing page that reports this status. If your server goes down then you'll get an faster notification than if you're polling (say) the process table.
Of course the fact that you can connect to the port doesn't really give you an indication of whether it's working other than it's opened a port (e.g. it may have no resources etc. to service requests) but it's a start.
I'm using Apache and Tomcat on a Windows server and since this morning, Tomcat stops working without any logs. It doesn't hang, it just shut down.
There's no log in Tomcat, the CPU/Memory are fines, there are no System.Exit in my code.
Anybody ever had this problem?
It happens at random, after 5-10 minutes. The application responds normally and sometime, boom.. stops working.
UPDATE : Still no clue. The Admin team will install the webapp on another box...
My script to start tomcat had last line tail -f catalina.out.
Sometime I did not kill this script, the shell then timed out and killed the script with all child processes, including tomcat.
This sounds like the JVM is crashing. Have you looked for a JVM crash log? It typically has a name like hs_err_pid*.log and is created in the JVM's working directory.
If you find a file like this and upload it, then we can probably help more.
Some questions:
Have you recently changed the version of Java you are using?
What is the exact version of Tomcat you are using?
Are you using Tomcat Native (the Apache Portable Runtime)?
Faced this issue recently.
Scenario : Tomcat started successfully but automatically gets shut down after 1 hour and sometimes this happened after 1 day and nothing is there in tomcat logs.
Issue : Actual issue was high memory usage and no free SWAP memory.
How I found the solution
If tomcat don't show any logs, then there must be something in system logs so, I checked /var/log/messages but since permission denied for me I tried /var/log/dmesg and got this
"Out of memory: Kill process 14606 (java) score 106 or sacrifice child".
In the output I noticed Swap Memory free 0 K. Ran top command to confirm the same. So, somehow there was a high memory usage which caused the OS to kill my tomcat process.
After spending hours finally got the reason.
ps -ef | grep tomcat showed that there were several tomcat processes running for the same application. It seems that, earlier tomcat shutdowns might not have taken successfully and the processes were not killed even after the shutdown due to some reason, which was causing the high memory usage.
So, killed all running tomcat processes using kill. SWAP memory got freed.
Started tomcat again, worked fine. :)
Recently I had this problem, If somebody faces the same issue in future I hope this will help.
Scenario: Tomcat shuts down without any logs or errors
Root Cause for my problem: synchronized method accessed from a task using TimerTask
I had a singleton class with a synchronized method accessed from various threads based on timer or user action
some times this method will take up to few minutes to complete. When TimerTask is waiting on this method for sometime (I guess timer is timed out /thread is killed or something is happening in the background) and the moment the lock on the method is released the tomcat is getting killed.
So I removed synchronized keyword and removed singleton and made some code changes for thread safety. Then the problem is gone.
How I found out: I had a log statement in the first line of synchronized method and everytime the tomcat shutdowns i found this message in the last few lines.
Regards,
Phanindra Kasturi
things to look for in debugging an issue like this:
Look at the logs directory ($TOMCAT_ROOT/logs) to make sure none of the log files have any stack traces
Look at the tomcat startup script to make check the location of the log files to see if the logs are not being written to another directory.
Another reason could be some other user/process could be issuing a kill -9 that could kill tomcat without giving it any chance to log errors.
another possibility is that some process was started this morning on the box that is binding to a port that your server requires.
Are your servlets or one of it's dependencies allowed to call System.exit()? (Not sure how locked down Tomcat VMs are in that sense)
I've had developers thinking it's ok to use exit(666); on detecting a non-invertable matrix (which isn't good, but sure as heck not fatal). Arrgh. Perhaps you have some similar culprit in your system?
I noticed CATALINA_OPTS in my path and that was set for a lower JVM size. Hence, the crash and no log trace of tomcat was found. The server automatically shutdown in less than 2 hrs.
check, CATALINA_OPTS or JAVA_OPTS -- these might have jvm settings. either increase them or comment them out and increase the swap memory.
“The Service on local computer started and then stopped ,Some services stop automatically if there are not in use by other services or programs.”
I gone through the problem i have tried so many ways to get out of the problem finally i got the solution as follows.
1) Click Run Command from start button.
2) Enter Services.msc then click OK,you will get all the services in your computer.
3) Select your service and right click on the service and select Properties
4) Goto Logon Properties and select Local System Account then click OK.
This will work.
Sometime it happens if some other program is running on the same port. For example Skype. Shut down that program before you start Tomcat.
try to clean your elipse projects because you could have tried to add another server which used port 8080 then when you try to execute the tomcat server externally that defaulty uses port 8080 the tomcat server automatically shutdowns after cleaning the project copy the new war file and paste it in bin it works fine
conclusion: when the server tries to use the port which has already been acquired you will see such type of issues.