I have a project, written in Kotlin/Java that uses spring-graphql annotation like #QueryMapping, #MutationMapping, etc.
The whole schema is defined in code using the above annotations.
But, in all the tutorials I've found, a .graphql file is needed, which is a huge duplication and a burden - especially if the schema is a bit complicated.
If I don't specify the .graphql file, the playground/graphiql doesn't load.
How to auto-generate the schema from code to be used by graphiql/playground without writing .graphql files? Thanks
Example tutorials:
techdozo
eh3rrera
Spring for GraphQL has a "schema-first" approach, that means you have to declare the schema yourself (common approach is to use SDL in .graphls files). Spring for GraphQL cannot generate the schema from annotations.
If you want to use "code-first" approach, where you write code with annotations and then let the tool generate the schema, you could try MicroProfile GraphQL, but I'm not sure, if that works in Spring.
Today I was trying to create a application using Hibernate as ORM. So while creating I had a doubt. What is the best practice to use, Hibernate mapping file (.hbm file) or annotations ? What are the pros and cons of it ? Please help me in understanding.
there is no functional difference. You can do (almost) the same things with both approaches
xml files were used before Java had annotations (added in 1.5), so they can be considered an outdated way of mapping
it is generally preferred to use JPA annotations rather than hibernate-specific ones; if using xml - there is a JPA xml format, which should be preferred to hibernate native one
The question is what is your taste - both ways can do (mostly) the same, the difference is how to write.
With annotations you have the Java member variable/getter and the mapping directly together at one place.
Xml mapping files give a better overview over the table and its mapping.
In my opinion xml mapping files help for a better design of the database and application. Annonations tend to force the direction Java class -> mapping -> database table, which is the wrong direction (the database always should be designed first - changing database tables later is a lot of effort - most performance leaks are in a bad database design - Java classes easily can be changed any time).
There if one functional advantage of xml files: If you have different databases with structural differences, for example one Oracle database and one MySQL database, perhaps some differences in table names and data types, then for porting your application from one database to another you only need to write some new mapping files. You do not need to change a single line of Java code. This is not possible with annotations.
I prefer to use xml mapping files. That is my taste.
One good use-case for using the XML approach is if you are persisting objects that have been generated by another utility and therefore cannot be annotated.
Other than that, I would use annotations as it tends to lend itself to a cleaner implementation and you're less likely to introduce bugs by misspelling property names.
This is how it says in "TUTORIALS POINT"
"If you going to make your application portable to other EJB 3 compliant ORM applications, you must use annotations to represent the mapping information but still if you want greater flexibility then you should go with XML-based mappings"
For me I would prefer XML configuration file, than annotation. Because then we can do changes, with minimum code changes.
Annotations are based on the principle of convention over configuration:
http://en.wikipedia.org/wiki/Convention_over_configuration
while xml files are just configuration.
There are many discussions about using annotations vs using configuration.
stackoverflow link
From my point of view, I prefer annotations because it is easier to write and to maintain.
Annotations are developed with java language and java developer easy to learn when compared with XML. And one more point in real time table names and column names are fixed 99%, so no need to change java code also
but if you want to change table names and column names frequently you will move with XML
finally cfg.xml file is manadatary because database may change.
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 8 years ago.
Improve this question
In a few large projects i have been working on lately it seems to become increasingly important to choose one or the other (XML or Annotation). As projects grow, consistency is very important for maintainability.
My questions are: what are the advantages of XML-based configuration over Annotation-based configuration and what are the advantages of Annotation-based configuration over XML-based configuration?
Annotations have their use, but they are not the one silver bullet to kill XML configuration. I recommend mixing the two!
For instance, if using Spring, it is entirely intuitive to use XML for the dependency injection portion of your application. This gets the code's dependencies away from the code which will be using it, by contrast, using some sort of annotation in the code that needs the dependencies makes the code aware of this automatic configuration.
However, instead of using XML for transactional management, marking a method as transactional with an annotation makes perfect sense, since this is information a programmer would probably wish to know. But that an interface is going to be injected as a SubtypeY instead of a SubtypeX should not be included in the class, because if now you wish to inject SubtypeX, you have to change your code, whereas you had an interface contract before anyways, so with XML, you would just need to change the XML mappings and it is fairly quick and painless to do so.
I haven't used JPA annotations, so I don't know how good they are, but I would argue that leaving the mapping of beans to the database in XML is also good, as the object shouldn't care where its information came from, it should just care what it can do with its information. But if you like JPA (I don't have any expirience with it), by all means, go for it.
In general:
If an annotation provides functionality and acts as a comment in and of itself, and doesn't tie the code down to some specific process in order to function normally without this annotation, then go for annotations. For example, a transactional method marked as being transactional does not kill its operating logic, and serves as a good code-level comment as well. Otherwise, this information is probably best expressed as XML, because although it will eventually affect how the code operates, it won't change the main functionality of the code, and hence doesn't belong in the source files.
There is a wider issue here, that of externalised vs inlined meta-data. If your object model is only ever going to persisted in one way, then inlined meta-data (i.e. annotations) are more compact and readable.
If, however, your object model was reused in different applications in such a way that each application wanted to persist the model in different ways, then externalising the meta-data (i.e. XML descriptors) becomes more appropriate.
Neither one is better, and so both are supported, although annotations are more fashionable. As a result, new hair-on-fire frameworks like JPA tend to put more emphasis on them. More mature APIs like native Hibernate offer both, because it's known that neither one is enough.
I always think about annotations as some kind of indicator of what a class is capable of, or how it interacts with others.
Spring XML configuration on the other hand to me is just that, configuration
For instance, information about the ip and port of a proxy, is definetly going into an XML file, it is the runtime configuration.
Using #Autowire,#Element to indicate the framework what to do with the class is good use of annotations.
Putting the URL into the #Webservice annotation is bad style.
But this is just my opinion.
The line between interaction and configuration is not always clear.
I've been using Spring for a few years now and the amount of XML that was required was definitely getting tedious. Between the new XML schemas and annotation support in Spring 2.5 I usually do these things:
Using "component-scan" to autoload classes which use #Repository, #Service or #Component. I usually give every bean a name and then wire them together using #Resource. I find that this plumbing doesn't change very often so annotations make sense.
Using the "aop" namespace for all AOP. This really works great. I still use it for transactions too because putting #Transactional all over the place is kind of a drag. You can create named pointcuts for methods on any service or repository and very quickly apply the advice.
I use LocalContainerEntityManagerFactoryBean along with HibernateJpaVendorAdapter to configure Hibernate. This lets Hibernate easily auto-discover #Entity classes on the classpath. Then I create a named SessionFactory bean using "factory-bean" and "factory-method" referring to the LCEMFB.
An important part in using an annotation-only approach is that the concept of a "bean name" more or less goes away (becomes insignificant).
The "bean names" in Spring form an additional level of abstraction over the implementing classes. With XML beans are defined and referenced relative to their bean name. With annotations they are referenced by their class/interface. (Although the bean name exists, you do not need to know it)
I strongly believe that getting rid of superfluous abstractions simplifies systems and improves productivity. For large projects I think the gains by getting rid of XML can be substantial.
It depends on what everything you want to configure, because there are some options that cannot be configured with anotations. If we see it from the side of annotations:
plus: annotations are less talky
minus: annotations are less visible
It's up to you what is more important...
In general I would recommend to choose one way and use it all over some closed part of product...
(with some exceptions: eg if you choose XML based configurations, it's ok to use #Autowire annotation. It's mixing, but this one helps both readability and maintainability)
I think that visibility is a big win with an XML based approach. I find that the XML isn't really that bad, given the various tools out there for navigating XML documents (i.e. Visual Studio + ReSharper's File Structure window).
You can certainly take a mixed approach, but that seems dangerous to me if only because, potentially, it would make it difficult for new developers on a project to figure out where different objects are configured or mapped.
I don't know; in the end XML Hell doesn't seem all that bad to me.
There are other aspect to compare like refactoring and other code changes. when using XML it takes serous effort to make refactoring because you have to take care of all the XML content. But it is easy when using Annotations.
My preferred way is the Java based configuration without (or minimal) annotations. http://static.springsource.org/spring/docs/3.0.x/spring-framework-reference/html/beans.html#beans-java
I might be wrong, but I thought Annotations (as in Java's #Tag and C#'s [Attribute]) were a compile-time option, and XML was a run-time option. That to me says the are not equivalent and have different pros and cons.
I also think a mix is the best thing, but it also depends on the type of configuration parameters.
I'm working on a Seam project which also uses Spring and I usually deploy it to different development and test servers. So I have split:
Server specific configuration (Like absolute paths to resources on server): Spring XML file
Injecting beans as members of other beans (or reusing a Spring XML defined value in many beans): Annotations
The key difference is that you don't have to recompile the code for all changing server-specific configurations, just edit the xml file.
There's also the advantage that some configuration changes can be done by team members who don't understand all the code involved.
In the scope of DI container, I consider annotation based DI is abusing the use of Java annotation. By saying that, I don't recommend to use it widely in your project. If your project does really needs the power of DI container, I would recommend to use Spring IoC with Xml based configuration option.
If it is just for a sake of Unit-test, developers should apply Dependency Inject pattern in their coding and take advantages from mocking tools such as EasyMock or JMock to circumvent dependencies.
You should try to avoid using DI container in its wrong context.
Configuration information that is always going to be linked to a specific Java component (class, method, or field) is a good candidate to be represented by annotations. Annotations work especially well in this case when the configuration is core to the purpose of the code. Because of the limitations on annotations, it's also best when each component can only ever have one configuration. If you need to deal with multiple configurations, especially ones that are conditional on anything outside the Java class containing an annotation, annotations may create more problems than they solve. Finally, annotations cannot be modified without recompiling the Java source code, so anything that needs to be reconfigurable at run time can't use annotations.
Please refer following links. They might be useful too.
Annotations vs XML, advantages and disadvantages
http://www.ibm.com/developerworks/library/j-cwt08025/
This is the classic 'Configuration versus Convention' question. Personal taste dictates the answer in most cases. However, personally I prefer Configuration (i.e. XML based) over Convention. IMO IDE's are sufficiently robust enough to overcome some of the XML hell people often associate w/ the building and maintaining an XML based approach. In the end, I find the benefits of Configuration (such as building utilities to build, maintain and deploy the XML config file) outweighs Convention in the long run.
I use both. Mostly XML, but when I have a bunch of beans that inherit from a common class and have common properties, I use annotations for those, in the superclass, so I don't have to set the same properties for each bean. Because I'm a bit of a control freak, I use #Resource(name="referredBean") instead of just autowiring stuff (and save myself a lot of trouble if I ever need another bean of the same class as the original referredBean).
There are some pros and cons of annotation configuration from my experience:
When it comes to JPA configuration since it is done once and usually are not changed quite often I prefer to stick to annotation configuration. There maybe a concern regarding possibility to see a bigger picture of configuration - in this case I use MSQLWorkbench diagrams.
Xml configuration is very good to get a bigger picture of application but it maybe cumbersome to find some errors until runtime. In this case Spring #Configuration annotation sounds as a better choice since it let you see a bigger picture as well and also allows to validate configuration on compile time.
As for Spring configuration I prefer to combine both approaches: use #Configuration annotation with Services and Query interfaces and xml configuration for dataSource and spring configuration stuff like context:component-scan base-package="..."
But xml configuration bits java annotations when it comes to flow configuration(Spring Web Flow or Lexaden Web Flow) since it is extremely important to see a bigger picture of the whole business process. And it sounds cumbersome to have it implemented with annotations approach.
I prefer combining both approaches - java annotations and essential xml minimum that minimize configuration hell.
For Spring Framework I like the idea of being able to use the #Component annotation and setting the "component-scan" option so that Spring can find my java beans so that I do not have to define all of my beans in XML, nor in JavaConfig. For example, for stateless singleton java beans that simply need to be wired up to other classes (via an interface ideally) this approach works very well. In general, for Spring beans I have for the most part moved away from Spring XML DSL for defining beans, and now favor the use of JavaConfig and Spring Annotations because you get some compile time checking of your configuration and some refactoring support that you don't get with Spring XML configuration. I do mix the two in certain rare cases where I've found that JavaConfig/Annotations can't do what is available using XML configuration.
For Hibernate ORM (haven't used JPA yet) I still prefer the XML mapping files because annotations in domain model classes to some degree violates The Clean Architecture which is a layering architectural style I have adopted over the past few years. The violation occurs because it requires the Core Layer to depend on persistence related things such as Hibernate or JPA libraries and it makes the domain model POJOs a bit less persistence ignorant. In fact the Core Layer is not supposed to depend on any other infrastructure at all.
However, if The Clean Architecture is not your "cup of tea" then I can see there are definitely advantages (such as convenience and maintainability) of using Hibernate/JPA annotations in domain model classes over separate XML mapping files.