I am currently thinking of developing an MMORPG with a Java Client. It will be a survival sandbox game, with much wilderness.
Now I would like to know if there is any program which can get the loaded world out of the cache of the running client. (as image or something else visible) I need this because the world would be huge and it will help to hand out official maps for the game.
You might want to start by looking into VBOs and VAOs (incredibly fast way of storing vertex, normal, texture... data on the GPU instead of the CPU). I'd also recommend checking out Blender, which I'm sure you've heard of, and their easily readable format known by the OBJ extension (The OBJ extension was developed by WaveFront). There are many libraries that allow you to read these files, but the format is simple enough that you can code an advanced mesh loader in around 80 lines or less.
I'm not entirely sure what you mean by your question about whether or not you can get a world out of the cache, but if you're looking to get 3D data from an image, you can check out height maps. However, height maps are better for general terrain where you will NOT have caves. Generally things like that are loaded from a 3D modeling program's output.
This might go against what other people think, but the best way to start out is by using OpenGL to its potential. Of course this involves implementing your own matrix stack for shaders and so on, but the payoff of easy engine modifications in the end is great. The good thing about OpenGL is even though you might have Java or C++ or some language that you use, the methods remaing (generally) the same. However, the syntax does vary just like the languages do themselves.
Pyglet (Python bindings for OpenGL) is an interesting place to start if you are looking to get started with OpenGL while maintaining ease of programming and quick debugging (because it is an interpreted language) and dynamic typing helps because OpenGL can be picky about the types it accepts.
I have been working on a voxel game for some time now, but all that I have really accomplished was the main menu and an Item system. Now its time to make the voxel engine. I have been searching for a while now to find some tutorials or an ebook that will teach me such, but the best i could find were someones tutorials in c++, but I am making mine in Java. I have dabbled in c++ and c# in the past but it was too difficult to translate i.e. it relied on a class that java doesn't have. What I know is that there are different methods for voxel engines, they all begin with rendering a single cube, and Perlin and Simplex noise can be used to randomize terrain generation.
If anyone could point me in the correct direction, most appreciated.
I will be checking back at least once a hour incase someone feels this thread is dead.
I'm not entirely sure what you are asking, if you are asking how to make simplex noise, implement it in a voxel engine or how to start making a voxel engine.
If you are asking how to start making a voxel engine I would recommend practising with quads first (2D version) and focus on getting an understanding for the theory. Once you are happy with your understanding you should focus on the voxel class (one cube) - it is very important to learn as much as you can from it, and then add more so you can optimize rendering as much as you can, such that hidden faces are not rendered and even vertices are shared, voxel engines can be the most wasteful renderers if not optimized!
EDIT:
Optimization can be done through many methods, The first and most important is hidden face removal, this involves removing the faces of voxels that are touching which will mean you will need to check of a voxel exists on any given side of any voxel before rendering that face (e.g before rendering the left face, check if there isn't a block to the left). Next is the rendering method, do not render each face or each group individually, group them so they can be rendered faster, this can be done by using display-lists or the more technical VBOs, these ensure the data is in the GPU or the data can be given to the GPU faster, For example Minecraft groups them in chunks of huge 16x16x128 groups and uses display lists. If you really want to reduce every single vertex in memory you can also consider using strip drawing methods (in OpenGL), these will require you to define certain vertices at a certain time in rendering but allow you to reuse a vertex for multiple faces.
Next would be understanding simplex noise, I can relate to there not being much material online for noise generation algorithms, unfortunately I cannot link material that I used as that was years ago. You can implement your noise algorithm in the 2D version to prove it works in a simpler environment and then copy it to the voxel version. Typical usage would be to use the values as heights in the terrain (e.g white=255 = 255 high).
I would recommend using Unity. The engine is already made and you can add menus and titles with just a few lines of code. All of the game creation is either in C# or Javascript which shouldn't be any huge change from C++. Good luck!
I am investigatin this field to obtain object detection in real time.
Video example:
http://www.youtube.com/watch?v=Bm5qUG-06V8
http://www.youtube.com/watch?v=aYd2kAN0Y20
But how can they extract sift keypoint and matching them so fast?
SIFT extraction requires a second generally
I'm an OpenIMAJ developer and responsible for making the first video.
We're not doing anything particularly fancy to make the matching fast in that video, and the SIFT detection and extraction is carried out on the entirety of every frame. In fact that video was made well before we did any optimisation; the current version of that demo is much smoother. We do also have a version with a hybrid KLT-tracker that works even faster by not having to perform SIFT on every frame.
As suggested by #Mario, the image size does have a big effect on the speed of the extraction, so processing a smaller frame can give a big win. Secondly, in the original description of the difference of Gaussian interest point localisation suggested by Lowe in the SIFT paper, it was suggested that the input image was first doubled in size to increase the number of features. By not performing this double-sizing you also get a big performance boost at the expense of having fewer features to match.
The code is open source (BSD license) and you can get it by following the links at http://www.openimaj.org. As stated in the video description, the image-processing code is pure Java; the only native code is a thin interface to the webcam. Tutorial number 7 in the current tutorial pdf document walks through the process of using SIFT in OpenIMAJ. Disabling the double-sizing can be achieved by doing:
DoGSIFTEngine engine = new DoGSIFTEngine();
engine.getOptions().setDoubleInitialImage(false);
SIFT can be accelerated in several ways :
if you can afford approximations, then you can derive a keypoint called SURF which is way faster (using integral images for most tasks)
you can use parallel implementations, at the CPU level (e.g. OpenCV uses Intel's TBB) or at the GPU level (google for sift gpu for related code and doc).
Anyway, none of these is available (AFAIK) in Java, so you'll have to use a Java wrapper to opencv or work it out yourself.
General and first idea: Ask the video uploader(s). We can just assume what's done or how it's done. It might also help to know what you've done so far (e.g. your video resolution, your processing power, image preparation, etc.).
I haven't used SIFT specifically, but I did quite some object/motion tracking during the last few years, so this is more in general. You might have tried some points already, I don't know.
Reduce your image resolution: Going from 640x480 to 320x240 will reduce your data to 25%. Going down to 160x120 will cut it by another 25% (so 6.25 % data left) without significantly impacting your algorithm.
In a similar way, it might be useful to reduce the color depth of your image (not just 256 grayscale, but maybe even more; like 64 colors).
Try other methods to make features more obvious or faster to find, e.g. try running an edge detector over your image.
At least the second video mentions a tracking system, so you could try to guess the region where the object tracked should reappear the next frame (using some simple a/b filter or whatever on coordinates and possibly rotation), then use SIFT on that sub area (with some added margin) only. Only analyze the whole image if you can't find it again. At around 40 or 50 seconds in the second video they're losing the object and need quite some time/tries to find it again.
I would like to implement a visualisation of this video in Java as experience to help me understand all of the 'troubles' in creating visualisations. I have some experience in OpenGL, and a good understanding of how to handle the physics involved. However, if anybody knows of any good game engines that may help (or at least do some of the heavy lifting involved in creating a visualisation of the above) I would be grateful.
Also, I noticed that the linked video must use many separate jets in order to operate in the way it does. Is it likely that it was created using something a little lower level such as C? Is it possible to use a higher level language like Java to control such a system?
Honestly, if you want to implement "just that", I think using a game engine is overkill. Just implement a simple particle engine on your own and you are done.
Seriously, that problem is not so difficult, any language can be used for it. The basic principle behind it is the same as behind steam organs or self player pianos. You have an input data that shows what the pattern to play is and you advance it in a given time.
Here is how I would build the basic control system. You take a black and white image. The width is exactly as wide as the number of "emitters" and the length is as long as the pattern needs to be. You read the image and start at the first line. You walk through each pixel in that line and if the pixel is black you emit a drop and if the pixel is white you don't. You then move in a given interval (maybe 25ms) to the next line and set the emitters accordingly.
The cool thing with images is that you can simply paint them in any graphic program. To get the current time to work you render the time into a image buffer in memory, then pass that into the above code. (You even get fonts if you like...)
You can use jMonkeyEngine.
JAVA OPEN GL GAME ENGINE
I am interested in writing a simplistic navigation application as a pet project. After searching around for free map-data I have settled on the US Census Bureau TIGER 2007 Line/Shapefile map data. The data is split up into zip files for individual counties and I've downloaded a single counties map-data for my area.
What would be the best way to read in this map-data into a useable format?
How should I:
Read in these files
Parse them - Regular expression or some library that can already parse these Shapefiles?
Load the data into my application - Should I load the points directly into some datastructure in memory? Use a small database? I have no need for persistence once you close the application of the map data. The user can load the Shapefile again.
What would be the best way to render the map once I have read the in the Shapefile data?
Ideally I'd like to be able to read in a counties map data shapefile and render all the poly-lines onto the screen and allow rotating and scaling.
How should I:
Convert lat/lon points to screen coordinates? - As far as I know the Shapefile uses longitude and latitude for its points. So obviously I'm going to have to convert these somehow to screen coordinates to display the map features.
Render the map data (A series of polylines for roads, boundaries, etc) in a way that I can easily rotate and scale the entire map?
Render my whole map as a series of "tiles" so only the features/lines within the viewing area are rendered?
Ex. of TIGER data rendered as a display map:
Anyone with some experience and insight into what the best way for me to read in these files, how I should represent them (database, in memory datastructure) in my program, and how I should render (with rotating/scaling) the map-data on screen would be appreciated.
EDIT: To clarify, I do not want to use any Google or Yahoo maps API. Similarly, I don't want to use OpenStreetMap. I'm looking for a more from-scratch approach than utilizing those apis/programs. This will be a desktop application.
First, I recommend that you use the 2008 TIGER files.
Second, as others point out there are a lot of projects out there now that already read in, interpret, convert, and use the data. Building your own parser for this data is almost trivial, though, so there's no reason to go through another project's code and try to extract what you need unless you plan on using their project as a whole.
If you want to start from the lower level
Parsing
Building your own TIGER parser (reasonably easy - just a DB of line segments), and building a simple render on top of that (lines, polygons, letters/names) is also going to be fairly easy. You'll want to look at various map projection types for the render phase. The most frequently used (and therefore most familiar to users) is the Mercator projection - it's fairly simple and fast. You might want to play with supporting other projections.
This will provide a bit of 'fun' in terms of seeing how to project a map, and how to reverse that projection (say a user clicks on the map, you want to see the lat/lon they clicked - requires reversing the current projection equation).
Rendering
When I developed my renderer I decided to base my window on a fixed size (embedded device), and a fixed magnification. This meant that I could center the map at a lat/lon, and with the center pixel=center lat/lon at a given magnification, and given the mercator projection I could calculate which pixel represented each lat/lon, and vice-versa.
Some programs instead allow the window to vary, and instead of using magnification and a fixed point, they use two fixed points (often the upper left and lower right corners of a rectangle defining the window). In this case it becomes trivial to determine the pixel to lat/lon transfer - it's just a few interpolation calculations. Rotating and scaling make this transfer function a little more complex, but shouldn't be considerably so - it's still a rectangular window with interpolation, but the window corners don't need to be in any particular orientation with respect to north. This adds a few corner cases (you can turn the map inside out and view it as if from inside the earth, for instance) but these aren't onerous, and can be dealt with as you work on it.
Once you've got the lat/lon to pixel transfer done, rendering lines and polygons is fairly simple except for normal graphics issues (such as edges of lines or polygons overlapping inappropriately, anti-aliasing, etc). But rendering a basic ugly map such as it done by many open source renderers is fairly straightforward.
You'll also be able to play with distance and great circle calculations - for instance a nice rule of thumb is that every degree of lat or lon at the equator is approximately 111.1KM - but one changes as you get closer to either pole, while the other continues to remain at 111.1kM.
Storage and Structures
How you store and refer to the data, however, depends greatly on what you plan on doing with it. A lot of difficult problems arise if you want to use the same database structure for demographics vs routing - a given data base structure and indexing will be fast for one, and slow for the other.
Using zipcodes and loading only the nearby zipcodes works for small map rendering projects, but if you need a route across the country you need a different structure. Some implementations have 'overlay' databases which only contain major roads and snaps routes to the overlay (or through multiple overlays - local, metro, county, state, country). This results in fast, but sometimes inefficient routing.
Tiling
Tiling your map is actually not easy. At lower magnifications you can render a whole map and cut it up. At higher magnifications you can't render the whole thing at once (due to memory/space constraints), so you have to slice it up.
Cutting lines at boundaries of tiles so you can render individual tiles results in less than perfect results - often what is done is lines are rendered beyond the tile boundary (or, at least the data of the line end is kept, though rendering stops once it finds it's fallen off the edge) - this reduces error that occurs with lines looking like they don't quite match as they travel across tiles.
You'll see what I'm talking about as you work on this problem.
It isn't trivial to find the data that goes into a given tile as well - a line may have both ends outside a given tile, but travel across the tile. You'll need to consult graphics books about this (Michael Abrash's book is the seminal reference, freely available now at the preceding link). While it talks mostly about gaming, the windowing, clipping, polygon edges, collision, etc all apply here.
However, you might want to play at a higher level.
Once you have the above done (either by adapting an existing project, or doing the above yourself) you may want to play with other scenarios and algorithms.
Reverse geocoding is reasonably easy. Input lat/lon (or click on map) and get the nearest address. This teaches you how to interpret addresses along line segments in TIGER data.
Basic geocoding is a hard problem. Writing an address parser is a useful and interesting project, and then converting that into lat/lon using the TIGER data is non-trivial, but a lot of fun. Start out simple and small by requiring exact name and format matching, and then start to look into 'like' matching and phonetic matching. There's a lot of research in this area - look at search engine projects for some help here.
Finding the shortest path between two points is a non-trivial problem. There are many, many algorithms for doing that, most of which are patented. I recommend that if you try this go with an easy algorithm of your own design, and then do some research and compare your design to the state of the art. It's a lot of fun if you're into graph theory.
Following a path and pre-emptively giving instructions is not as easy as it looks on first blush. Given a set of instructions with an associated array of lat/lon pairs, 'follow' the route using external input (GPS, or simulated GPS) and develop an algorithm that gives the user instructions as they approach each real intersection. Notice that there are more lat/lon pairs than instructions due to curving roads, etc, and you'll need to detect direction of travel and so forth. Lots of corner cases you won't see until you try to implement it.
Point of interest search. This one is interesting - you need to find the current location, and all the points of interest (not part of TIGER, make your own or get another source) within a certain distance (as the crow flies, or harder - driving distance) of the origin. This one is interesting in that you have to convert the POI database into a format that is easy to search in this circumstance. You can't take the time to go through millions of entries, do the distance calculation (sqrt(x^2 + y^2)), and return the results. You need to have some method or algorithm to cut the amount of data down first.
Traveling salesman. Routing with multiple destinations. Just a harder version of regular routing.
You can find a number of links to many projects and sources of information on this subject here.
Good luck, and please publish whatever you do, no matter how rudimentary or ugly, so others can benefit!
-Adam
SharpMap is an open-source .NET 2.0 mapping engine for WinForms and ASP.NET. This may provide all the functionality that you need. It deals with most common GIS vector and raster data formats including ESRI shapefiles.
the solution is :
a geospatial server like mapserver, geoserver, degree (opensource).
They can read and serve shapefiles (and many other things). For example, geoserver (when installed) serve data from US Census Bureau TIGER shapefiles as demo
a javascript cartographic library like openlayers (see the examples at link text
There are plenty of examples on the web using this solution
Funny question. Here's how I do it.
I gather whatever geometry I need in whatever formats they come in. I've been pulling data from USGS, so that amounts to a bunch of:
SHP Files (ESRI Shapefile Technical Description)
DBF Files (Xbase Data file (*.dbf))
I then wrote a program that "compiles" those shape definitions into a form that is efficient to render. This means doing any projections and data format conversions that are necessary to efficiently display the data. Some details:
For a 2D application, you can use whatever projection you want: Map Projections.
For 3D, you want to convert those latitude/longitudes into 3D coordinates. Here is some math on how to do that: transformation from
spherical coordinates to normal rectangular coordinates.
Break up all the primitives into a quadtree/octree (2D/3D). Leaf nodes in this tree contain references to all geometry that intersects that leaf node's (axis-aligned) bounding-box. (This means that a piece of geometry can be referenced more than once.)
The geometry is then split into a table of vertices and a table of drawing commands. This is an ideal format for OpenGL. Commands can be issued via glDrawArrays using vertex buffers (Vertex Buffer Objects).
A general visitor pattern is used to walk the quadtree/octree. Walking involves testing whether the visitor intersects the given nodes of the tree until a leaf node is encountered. Visitors include: drawing, collision detection, and selection. (Because the tree leaves can contain duplicate references to geometry, the walker marks nodes as being visited and ignores them thereafter. These marks have to be reset or otherwise updated before doing the next walk.)
Using a spatial partitioning system (one of the trees) and a drawing-efficient representation is crucial to achieving high framerates. I have found that in these types of applications, you want your frame rate as high as possible 20 fps at a minimum. Not to mention the fact that lots of performance will give you lots of opportunities to create a better looking map. (Mine's far from good looking, but will get there some day.)
The spatial partitioning helps rendering performance by reducing the number of draw commands sent to the processor. However, there could come a time when the user actually wants to view the entire dataset (perhaps an arial view). In this case, you need a level of detail control system. Since my application deals with streets, I give priority to highways and larger roads. My drawing code knows about how many primitives I can draw before my framerate goes down. The primitives are also sorted by this priority. I draw only the first x items where x is the number of primitives I can draw at my desired framerate.
The rest is camera control and animation of whatever data you want to display.
Here are some examples of my existing implementation:
Picture http://seabusmap.com/assets/Picture%205.png Picture http://seabusmap.com/assets/Picture%207.png
for storing tiger data locally, I would chose Postgresql with the postgis tools.
they have an impressive collection of tools, for you especially the Tiger Geocoder offers good way of importing and using the tiger data.
you will need to take a look at the tools that interact with postgis, most likely some sort of mapserver
from http://postgis.refractions.net/documentation/:
There are now several open source tools which work with PostGIS. The uDig project is working on a full read/write desktop environment that can work with PostGIS directly. For internet mapping, the University of Minnesota Mapserver can use PostGIS as a data source. The GeoTools Java GIS toolkit has PostGIS support, as does the GeoServer Web Feature Server. GRASS supports PostGIS as a data source. The JUMP Java desktop GIS viewer has a simple plugin for reading PostGIS data, and the QGIS desktop has good PostGIS support. PostGIS data can be exported to several output GIS formats using the OGR C++ library and commandline tools (and of cource with the bundled Shape file dumper). And of course any language which can work with PostgreSQL can work with PostGIS -- the list includes Perl, PHP, Python, TCL, C, C++, Java, C#, and more.
edit: depite mapserver having the word SERVER in its name, this will be usable in a desktop environment.
Though you already decided to use the TIGER data, you might be interested in OSM (Open Street Map), beacuse OSM has a complete import of the TIGER data in it, enriched with user contributed data. If you stick to the TIGER format, your app will be useless to international users, with OSM you get TIGER and everything else at once.
OSM is an open project featuring a collaboratively edited free world map. You can get all this data as well structured XML, either query for a region, or download the whole world in a large file.
There are some map renderers for OSM available in various programming languages, most of them open source, but still there is much to be done.
There also is an OSM routing service avaliable. It has a web-interface and might also be queriable via a web service API. Again, it's not all finished. Users could definitely use a desktop or mobile routing application built on top of this.
Even if you don't decide to go with that project, you can get lots of inspiration from it. Just have a look at the project wiki and at the sources of the various software projects which are involved (you will find links to them inside the wiki).
You could also work with Microsoft's visual earth mapping application and api or use Google's api. I have always programmed commercially with ESRI products and have not played with the open api's that much.
Also, you might want to look at Maker! and Finder! They are relatively new programs but I think they are free. Might be limited on embedding the data.Maker can be found here.
The problem is that spatial processing is fairly new in the non commercial scale.
If you don't mind paying for a solution Safe Software produces a product called FME. This tool will help you translate data from any format to just about any other. Including KML the Google Earth Format or render it as a JPEG (or series of JPEGs). After converting the data you can embed google earth into your application using their API or just display the tiled images.
As a side not FME is a very powerful platform so while doing your translations you can add or remove parts of data that you don't necessarily need. Merge sources if you have more than one. Convert coordinates (I don't remember what exactly Google Earth uses). Store backups in a database. But seriously if your willing to shell out a few bucks you should look into this.
You can also create flags (much like in your sample map) which contain a location (where to put it) and other data/comments about the location. These flags come in many shapes and sizes.
One simplification over a Mercator or other projection is to assume a constant conversion factor for the latitude and longitude. Multiply the degrees of latitude by 69.172 miles; for the longitude, pick the middle latitude of your map area and multiply (180-longitude) by cosine(middle_latitude)*69.172. Once you've converted to miles, you can use another set of conversions to get to screen coordinates.
This is what worked for me back in 1979.
My source for the number of miles per degree.
When I gave this answer the question was labeled
"What would be the best way to render a Shapefile (map data) with polylines in .Net?"
Now it is a different question but I leave my answer to the original question.
I wrote a .net version that could draw
vector-data (such as the geometry from
a shp file) using plain GDI+ in c#. It
was quite fun.
The reason was that we needed to
handle different versions of
geometries and attributes with a lot
of additional information so we could
not use a commercial map component or
an open source one.
The main thing when doing this is
establish a viewport and
translate/transform WGIS84 coordinates
to a downscale and GDI+ x,y
coordinates and wait with projection
if you even need to reproject at all.
One solution is to use MapXtreme. They have API's for Java and C#. The API is able to load these files and render them.
For Java:
http://www.mapinfo.com/products/developer-tools/desktop%2c-mobile-%26-internet-offering/mapxtreme-java
For .NET:
http://www.mapinfo.com/products/developer-tools/desktop%2c-mobile-%26-internet-offering/mapxtreme-2008
I used this solution in a Desktop application and it worked well. It offers a lot more that only rendering information.
Now doing this from scratch could take quite a while. They do have an evaluation version that you can download. I think it just prints "MAPXTREME" over the map as a watermark, but it is completely usable otherwise