We Keep Coding

Get same JAVA compilation error as in PowerShell or CMD in Visual Studio Code

I'm on latest Windows 10. I have JDK 15. Latest Visual Studio Code (System). In VS Code, I have half of the Java Extension Pack Installed, i.e Language Support for Java (Red Hat) | Debugger for Java (Microsoft) | Visual Studio IntelliCode (Microsoft). So I did that to just get that run button on the top right (the default installed VS Code didn't have that run button for JAVA programs), below the close button, to that I can run the JAVA programs inside the VS Code. I didn't wanna go out to the directory then open Power Shell or CMD and then write java filename.java and run the program...
Now the issue is that when I click the run button, I think, a Power Shell is opened inside the VS Code and then something other than "java FileName.java" is being written. Because of that I can't really see what the compilation error is. I can only see the line number where the problem is, not actually the solution for that. || If I run the same in the PowerShell outside the VS Code with this "java FileName.java", I can see that there is some issue at x line and also the solution for the same.
So I wanted to know if there is any way to get this type of output inside the Visual Studio Code.
Or if there is any way that Instead of writing a lot of thing like this, we can simple tell the Visual Studio Code to run "java fileName.java" inside VS Code when I click the Run Button at the top.
EDIT:
The Code that I'm running is this one.....
File Name - test.java
import java.io.*;
public class SOPFileTest{
public static void main(String arr[]){
try{
// Creating a File object that represents the disk file.
PrintStream o = new PrintStream(new File("A.txt"));
// Store current System.out before assigning a new value
PrintStream console = System.out;
// Assign o to output stream
System.setOut(o);
System.out.println("Test 1");
// Use stored value for output stream
System.setOut(console);
System.out.println("Test 2");
}
catch(Exception e){
System.out.println(e.getMessage());
}
}
Now I've noticed somethings, they are:
-When (FileName == Class Name)
---Then (VS Code)
-----Prints the Last System.out.println in the console
-----A.txt is not created / written inside
---Then (Powershell)
-----Prints the Last System.out.println in the console
-----A.txt is created and/or written inside
-When (FileName != Class Name)
---Then (VS Code)
-----shows the error same as the image that I included above.
---Then (Powershell)
-----Prints the Last System.out.println in the console
-----A.txt is created and/or written inside
So powershell works as I intend it would, the VS Code isn't...

If the filename is different from ClassName, java extension will detect it and throws probelms, which is build failed and you can choose if continue:
If you choose proceed, there should be:
[UPDATE -- Screenshot in Powershell:]
It's about the same as problems shown in VS Code.
Java extension requires class must be defined in its own file, so filename should be as the same as ClassName, then everything works well, no matter in integrated Terminal in VS Code, or in the PowerShell outside VS Code:
So I wanted to know if there is any way to get this type of output
inside the Visual Studio Code.
Keeping the filename and classname same makes sure it could be built and compiled successfully, which is the first step.
And the text file should be generated in current working directory, check it in your file explorer.

Google OR-Tools in Intellij: UnsatisfiedLinkError

I am setting up a java framework that should use the Google OR-Tools. The code below compiles successfully, but throws an exception at runtime:
Exception in thread "main" java.lang.UnsatisfiedLinkError: com.google.ortools.linearsolver.operations_research_linear_solverJNI.MPSolver_CLP_LINEAR_PROGRAMMING_get()I
at com.google.ortools.linearsolver.operations_research_linear_solverJNI.MPSolver_CLP_LINEAR_PROGRAMMING_get(Native Method)
at com.google.ortools.linearsolver.MPSolver$OptimizationProblemType.<clinit>(MPSolver.java:221)
at Main.main(Main.java:15)
I am using Intellij 2018.3 on Windows 10. I spent a lot of time trying to get this run, but unsuccessful. Based on what I found on the internet, the exception might be caused by poor linking and/or missing external libraries on which OR-Tools depends. However, I don't have the background to resolve this issue, and also Intellij does not highlight anything. Any idea what the problem is?
For completion, this is the code I run:
import com.google.ortools.linearsolver.MPObjective;
import com.google.ortools.linearsolver.MPSolver;
import com.google.ortools.linearsolver.MPVariable;
public final class Main {
public static void main(String[] args) {
// Create the linear solver with the GLOP backend.
MPSolver solver =
new MPSolver("SimpleLpProgram", MPSolver.OptimizationProblemType.GLOP_LINEAR_PROGRAMMING);
// Create the variables x and y.
MPVariable x = solver.makeNumVar(0.0, 1.0, "x");
MPVariable y = solver.makeNumVar(0.0, 2.0, "y");
System.out.println("Number of variables = " + solver.numVariables());
// Create a linear constraint, 0 <= x + y <= 2.
MPConstraint ct = solver.makeConstraint(0.0, 2.0, "ct");
ct.setCoefficient(x, 1);
ct.setCoefficient(y, 1);
System.out.println("Number of constraints = " + solver.numConstraints());
// Create the objective function, 3 * x + y.
MPObjective objective = solver.objective();
objective.setCoefficient(x, 3);
objective.setCoefficient(y, 1);
objective.setMaximization();
solver.solve();
System.out.println("Solution:");
System.out.println("Objective value = " + objective.value());
System.out.println("x = " + x.solutionValue());
System.out.println("y = " + y.solutionValue());
}
}

In my case solution was simple - I just needed to add this singe line of code:
Loader.loadNativeLibraries();
where loader comes from com.google.ortools.Loader

Disclaimer: more a long comment than an answer...
note: I supposed you are using the github repository of or-tools if you used the binary package it should be more or less the same...
1) You must load the jni library which will load the OR-Tools C++ libraries and its dependencies...
/** Simple linear programming example.*/
public class Main {
static {
System.loadLibrary("jniortools");
}
public static void main(String[] args) throws Exception {
2) Did you manage to run the java samples ?
make run SOURCE=ortools/linear_solver/samples/SimpleLpProgram.java
ref: https://developers.google.com/optimization/introduction/java#simple_example
3) As Kayaman pointed out, you must pass the folder where the java runtime can find the native libraries (i.e. the JNI wrapper jniortools.dll and its dependencies libortools.dll)
if you look at the console log you'll see the full command line:
java -Xss2048k -Djava.library.path=lib -cp lib\sample.jar;lib\com.google.ortools.jar;lib\protobuf.jar ...\sample
Which comes from, the makefiles/Makefile.java file:
JAVAFLAGS = -Djava.library.path=$(LIB_DIR)
...
ifeq ($(SOURCE_SUFFIX),.java) # Those rules will be used if SOURCE contain a .java file
$(CLASS_DIR)/$(SOURCE_NAME): $(SOURCE) $(JAVA_OR_TOOLS_LIBS) | $(CLASS_DIR)
-$(DELREC) $(CLASS_DIR)$S$(SOURCE_NAME)
-$(MKDIR_P) $(CLASS_DIR)$S$(SOURCE_NAME)
"$(JAVAC_BIN)" -d $(CLASS_DIR)$S$(SOURCE_NAME) \
-cp $(LIB_DIR)$Scom.google.ortools.jar$(CPSEP)$(LIB_DIR)$Sprotobuf.jar \
$(SOURCE_PATH)
...
.PHONY: run # Run a Java program.
run: build
"$(JAVA_BIN)" -Xss2048k $(JAVAFLAGS) \
-cp $(LIB_DIR)$S$(SOURCE_NAME)$J$(CPSEP)$(LIB_DIR)$Scom.google.ortools.jar$(CPSEP)$(LIB_DIR)$Sprotobuf.jar \
$(SOURCE_NAME) $(ARGS)
endif
src: https://github.com/google/or-tools/blob/46173008fdb15dae1dca0e8fa42a21ed6190b6e4/makefiles/Makefile.java.mk#L15
and
https://github.com/google/or-tools/blob/46173008fdb15dae1dca0e8fa42a21ed6190b6e4/makefiles/Makefile.java.mk#L328-L333
note: you can run make detect_java to know the flags i.e. value of LIB_DIR
note: if you did use the precompiled package the Makefile is here:
https://github.com/google/or-tools/blob/stable/tools/Makefile.cc.java.dotnet
Then after you can try to add this option in Intellij...
You must understand that or-tools is a set of C++ native libraries which are wrapped to Java using the SWIG generator.

To make it work using Intellij (over a windows machine) you need to:
Install Microsoft Visual C++ Redistributable for Visual Studio
Download and extract the OR-Tools library for Java
In intellij, add jar dependency to the 2 jars under the lib folder of the extracted files (each of the 2 jars separately, do not add to lib folder itself. This is why).
Add the lib library path to VM options. In Intellij edit your run-configuration and add to vm options: -Djava.library.path=<path to the lib folder that hold the jars>
Load the jni library statically by adding the below code to your class (as mentioned here.)
static {
System.loadLibrary("jniortools");
}

java rmi simple project classNotFoundException binding registry

Ok, I'm sure this should be pretty easy, but I'm fairly new to Java (I'm more a .NET boy :P) and after following every single recommendation I found here to no success, I think it's time to step back and ask.
I'm trying to start a simple rmi project with a client, a server and a common project where common interfaces are defined. I've just implemented my server code, and when I try to run it to check if everything is fine, I get struck on a java.lang.ClassNotFoundException.
After following several answers on similar issues, I'm fair sure that my problem comes from rmiregistry running on a different location than my project.
I use following code to set registry codebase:
public class Utils {
public static final String CODEBASE = "java.rmi.server.codebase";
public static void setCodeBase(Class<?> c) {
String ruta = c.getProtectionDomain().getCodeSource().getLocation().toString();
String path = System.getProperty(CODEBASE);
if (path != null && !path.isEmpty()) {
ruta = path + " " + ruta;
}
System.setProperty(CODEBASE, ruta);
}
}
Then, I try to start my server code with this main class:
public class MainRegulador {
public static void main(String[] args) throws AccessException, RemoteException, NotBoundException {
Utils.setCodeBase(IRegulador.class);
Registry registro = null;
Remote proxy = null;
try {
Regulador myReg = new Regulador();
proxy = UnicastRemoteObject.exportObject(myReg, 36510);
registro = LocateRegistry.getRegistry();
registro.rebind("Distribuidor", proxy); //this is the line where exception is thrown
System.out.println("El Regulador está corriendo. Pulse ENTER para finalizar el proceso.");
System.in.read();
} catch(Exception ex) {
System.out.println("No se ha logrado inicializar el Registrador");
System.out.println(ex.getMessage());
} finally {
if (registro != null && proxy != null) {
registro.unbind("Distribuidor");
UnicastRemoteObject.unexportObject(proxy, true);
}
}
}
}
But when I run it, always get a java.lang.ClassNotFoundException at IRegulador interface.
Now the fun part:
I've printed to console java.rmi.server.codebase value, and it's pointing to bin folder of project where IRegulador interface is defined. (file:/F:/Practicas%20y%20dem%c3%a1s/Sistemas%20Distribuidos/common/bin/)
Obviously, that project is also set in the classpath of server project
(Regulador)
Workspace and rmiregistry are on different disks
Despite all, it doesn't seem a global classpath problem, as Utils class is on the same project as IRegulador interface, and it runs before the exception is thrown (as java.rmi.server.codebase is correctly set).
I've tried to set the classpath of rmiregistry before calling it (although it is directly discouraged on some answers), but nothing changed.
I've also tried to start rmiregistry.exe from Regulador project bin folder, but also seemed to don't change anything.
Coming from a .NET background, I've always found these classpath issues confusing, and this one is starting to consume much more time than I suspect it deserves. I'm in desperate need of help.
UPDATE: I'm starting to think that the problem is within the url it's passed to the codebase from IRegulador.class. If I paste it into windows explorer, the SO is unable to locate it, so I supose that it's being built with some structure problem that prevents the registry to reach the route:
file:/F:/Practicas%20y%20dem%c3%a1s/Sistemas%20Distribuidos/common/bin/
UPDATE2: I thought path route could be too complex, so I decided to simplify it and strip it from any non-straight character. Now codebase value is
file:/F:/Practicas/SD/common/bin/
However the problem persists, I don't know why rmiregistry is unable to reach that folder.
Then I decided to move the whole project to the same disk where rmiregistry is executed, and see if it changes anything. But nothing changed, same problem.

Ok, finally I got it working...
I've just copied rmiregistry.exe into the common/bin folder and launch it directly from there (previously just had called from there).
This seems to fix the problem with the routes (actually it makes the route available to the registry as it's on the same folder, probably all my codebase writting code is superflous now).

Suddenly cannot run/compile java program

Everything worked perfectly until I had to brute-force restart notebook with opened java project ( 1 java class which was compiled ). After the reboot i opened intellij created a new project ( the old was not saved ) , then in src folder created a java class but whenever I want to Run it I get only "Edit the configuration" and do not know what to do.
Also when i write some piece of code like:
import java.util.*;
public class Main
{
public static void main( String[] args )
{
List<String> list = new ArrayList<String>();
list.add( "Example" );
}
}
The add method is red and it says Cannot resolve the symbol add().
This happens with every method even to System.out.println()
I will be very thankful for your suggestions. ( Btw I'm using intellij ultimate version, Linux Mint 17 ).

Please read compiler messages more carefully.
List<String> list = new String<String>();
Doesnt work - try:
List<String> list = new ArrayList<>();
for example!
So, the real lesson here is not that you made a little typo. It is about the fact that you can trust on compiler error messages to a high degree! So, before you think "is my project broken"; you look at your source code and any error message really really carefully.

Stop Intellij, remove the .idea folder and .iml file from the directory, then restart. You'll have to create a new project from the code, but it should work. If you continue to have problems, go to the File menu and selected "Invalidate caches/restart". Choose "Invalidate and restart."

can I load user packages into eclipse to run at start up and how?

I am new to java and to the eclipse IDE.
I am running Eclipse
Eclipse SDK
Version: 3.7.1
Build id: M20110909-1335
On a windows Vista machine.
I am trying to learn from the book Thinking in Java vol4.
The author uses his own packages to reduce typing. However the author did not use Eclipse and this is where the problem commes in..
This is an example of the code in the book.
import java.util.*;
import static net.mindview.util.print.*;
public class HelloWorld {
public static void main(String[] args) {
System.out.println("hello world");
print("this does not work");
}
this is the contents of print.Java
//: net/mindview/util/Print.java
// Print methods that can be used without
// qualifiers, using Java SE5 static imports:
package net.mindview.util;
import java.io.*;
public class Print {
// Print with a newline:
public static void print(Object obj) {
System.out.println(obj);
}
// Print a newline by itself:
public static void print() {
System.out.println();
}
// Print with no line break:
public static void printnb(Object obj) {
System.out.print(obj);
}
// The new Java SE5 printf() (from C):
public static PrintStream
printf(String format, Object... args) {
return System.out.printf(format, args);
}
} ///:~
The error I get the most is in the statement.
Import static net.mindview.util.print.*;
On this staement the Eclipse IDE says it cannot resolve net
also on the
print("this does not work");
The Eclipse IDE says that the class print() does not exist for the class HelloWorld.
I have been trying to get these to work, but with only limited success, The autor uses another 32 of these packages through the rest of the book.
I have tried to add the directory to the classpath, but that seems to only work if you are using the JDK compiler. I have tried to add them as libraries and i have tried importing them into a package in a source file in the project. I have tried a few other things but cant remember them all now.
I have been able to make one of the files work, the print.java file I gave the listing for in this message. I did that by creating a new source folder then making a new package in that foldeer then importing the print.java file into the package.
But the next time I try the same thing it does not work for me.
What I need is a way to have eclipse load all these .java files at start up so when I need them for the exercises in the book they will be there and work for me, or just an easy way to make them work everytime.
I know I am not the only one that has had this problem I have seen other questions about it on google searches and they were also asking about the Thinking In Java book.
I have searched this site and others and am just not having any luck.
Any help with this or sugestions are welcome and very appreciated.
thank you
Ok I have tried to get this working as you said, I have started a new project and I removed the static from the import statement, I then created a new source folder, then I created a new package in the source folder. Then I imported the file system and selected the the net.mindview.util folder.
Now the immport statement no longer gives me an error. But the the print statement does, the only way to make the print statement work is to use its fully qualified name. Here is the code.
import net.mindview.util.*;
public class Hello2 {
public static void main(String[] args) {
Hello2 test = new Hello2();
System.out.println();
print("this dooes not work");
net.mindview.util.Print.print("this stinks");
}
}
The Error on the print statement is:
The method print(String) is undefined for the type Hello2
and if I try to run it the error I get is:
Exception in thread "main" java.lang.Error: Unresolved compilation problem:
The method print(String) is undefined for the type Hello2
at Hello2.main(Hello2.java:6)
The Statement::::: net.mindview.util.Print.print("this stinks") is the fully qualified print statement and it does not throw an error but it does totally defeat the purpose of the print.java file..
If you have any questions please ask Ill get back to you as soon as I can.

I've had similar issues. I solved it by following the steps below:
Click File->New->Java Project. Fill in UtilBuild for the ProjectName. Chose the option "Use project folder as root and click 'Finish'.
Right-click on UtilBuild in the PackageExplorer window and click New->package. For the Package Name, fill in net.mindview.util
Navigate within the unzipped Thinking In Java (TIJ) folder to TIJ->net\mindview\util. Here you will find all the source code (.java) files for util.
Select all the files in the net\mindview\util folder and drag them to the net.mindview.util package under UtilBuild in Eclipse. Chose the 'Copy Files' option and hit 'OK'.
You will probably already have the 'Build Automatically' option checked. If not, go to Project and click 'Build Automatically'. This will create the .class files from the .java source files.
In Eclipse, right-click on the project you were working on (the one where you couldn't get that blasted print() method to work!) Click Properties and Java Build Path->Libraries. Click 'Add Class Folder...' check the box for UtilBuild (the default location for the .class files).
I think the confusion here arises due to CLASSPATH. If you use Eclipse to build and run your code then Eclipse manages your CLASSPATH. (You don't have to manually edit CLASSPATH in the 'Environment Variables' part of your computer properties, and doing so changes nothing as far as Eclipse Build and Run are concerned.)
In order to call code that exists outside your current project (I will name this 'outside code' for convenience) you need to satisfy three things:
A. You need to have the .class files for that code (as .class files or inside a JAR)
B. You need to indicate in your source code where to look for the 'outside code'
C. You need to indicate where to start looking for the 'outside code'
In order to satisfy these requirements, in this example we:
A. Build the project UtilBuild which creates the .class files we need.
B. Add the statement import static net.mindview.util.Print.*; in our code
C. Add the Class Folder library in Eclipse (Java Build Path->Libraries).
You can investigate the effect of Step C by examining the .classpath file that lives directly in your project folder. If you open it in notepad you will see a line similar to the following:
<classpathentry kind="lib" path="/UtilBuild>
You should combine this with your import statement to understand where the compiler will look for the .class file. Combining path="/UtilBuild" and import static net.mindview.util.Print.*; tells us that the compiler will look for the class file in:
UtilBuild/net/mindview/util
and that it will take every class that we built from the Print.java file (Print.*).
NOTE:
There is no problem with the keyword static in the statement
import static net.mindview.util.Print.*;
static here just means that you don't have to give specify the class name from Print.java, just the methods that you want to call. If we omit the keyword static from the import statement, then we would need to qualify that print() method with the class it belongs to:
import net.mindview.util.Print.*;
//...
Print.print("Hello");
which is slightly more verbose than what is achieved with the static import.
OPINION:
I think most people new to Java will use Eclipse at least initially. The Thinking in Java book seems to assume you will do things via command line (hence it's guidance to edit environment variables in order to update CLASSPATH). This combined with using the util folder code from very early in the book I think is a source of confusion to new learners of the language. I would love to see all the source code organised into an Eclipse project and available for download. Short of that, it would be a nice touch to include the .class files in just the 'net/mindview/util' folder so that things would be a little easier.

U should import package static net.mindview.util not static net.mindview.util.Print
and you should extend the class Print to use its method.......

You should remove the static keyword from your import decleration, this: import static net.mindview.util.print.*; becomes this: import net.mindview.util.print.*;
If that also does not work, I am assuming you did the following:
Create your own project;
Start copying code directly from the book.
The problem seems to be that this: package net.mindview.util; must match your folder structure in your src folder. So, if your src folder you create a new package and name it net.mindview.util and in it you place your Print class, you should be able to get it working.
For future reference, you should always make sure that your package decleration, which is at the top of your Java class, matches the package in which it resides.
EDIT:
I have seen your edit, and the problem seems to have a simple solution. You declare a static method named print(). In java, static methods are accessed through the use of ClassName.methodName(). This: print("this dooes not work"); will not work because you do not have a method named print which takes a string argument in your Hello2 class. In java, when you write something of the sort methodName(arg1...), the JVM will look for methods with that signature (method name + parameters) in the class in which you are making the call and any other classes that your calling class might extend.
However, as you correctly noted, this will work net.mindview.util.Print.print("this stinks");. This is because you are accessing the static method in the proper way, meaning ClassName.methodName();.
So in short, to solve your problem, you need to either:
Create a method named print which takes a string argument in your Hello2 class;
Call your print method like so: Print.print("this stinks");
Either of these two solutions should work for you.

In my case I've dowloaded and decompressed the file TIJ4Example-master.zip. in eclipse workspace folder. The three packages : net.mindview.atunit, net.mindview.simple and net.mindview.util are in this point of the project :
and java programs runs with no problems (on the right an example of /TIJ4Example/src/exercises/E07_CoinFlipping.java)