I have an existing Java application running on a linux box that monitors the state of relays and network information. This is a stand-alone device currently.
What I would like to further develop is a web server for the device to remotely monitor, configure, and control the device via an Ethernet connection. To achieve this, I need some way to interface between the web server, which could be configured as enabled/disabled, and the master device, which is always running.
Is there a good way to do this? I have looked at apache w/ tomcat and similar web servers but not sure if this is what I need. The key here is that the web server needs to be able to access the existing java application without interfering with its always running services.
You either develop a webapp, use your Java application's API inside the webapp, and deploy this webapp inside a web container. Or you can do the reverse and embed a web server inside your application (see here for documentation to embed Jetty).
If you want to keep the webapp and the original application in two separate JVMs, you'll need some wey to communicate between both, like sockets, RMI, or even files, but it will be more complex.
You might want to take a look at JMX http://docs.oracle.com/javase/tutorial/jmx/overview/index.html
Related
I have a stand alone Java application that needs to get information (string data) from a Java EE application, running on a Glassfish 3.1 Application server. I have created a web service for my Java app, but I'm wondering how I could achieve communication with the Java EE glass fish app (using servlet?).
I hope to have a method on my app that can be called from, for example, a client running on glassfish (and vice-versa). This method would have something like a String array as parameter, so that I would be able to pass the data between the apps.
Note: I am unable to deploy my app on Glassfish, since we are trying to achieve separation till we are sure the application I am developing will not cause Glassfish to crash ( we currently have other critical apps running on Glassfish). Also note that this is all taking place on the same machine.
You should develop a web service and deploy it on Glassfish within your existing application. You can do this via a Servlet based web service, or a Session Bean web service, whichever is more appropriate for you.
You will then create a web service client against that web service for your Java app, and integrate it appropriately with calls to the servers via the web service.
Of course, this should all be done against development servers, not your production servers. Glassfish can be deployed pretty much anywhere: your machine, another machine, a VM, in "the cloud". Not having a development server available for, well, development is unacceptable. There is no way you can determine if your app will "crash Glassfish" unless you can test it.
To quote the esteemed Donald Knuth: "I have only proved it correct, not tried it."
Get a test server, develop against it. Move forward.
Have you looked at the URL class.
try this url Java URL example
This may help
I have a bunch of shell scripts on every client machine. I need a web interface to provide settings for these scripts and it should invoke these scripts.
If i run a web application from a server to run scripts, it will overload the server due to multiple client requests, so client side web app is preferred.
Applets can solve this. But, it is outdated and I dont like it.
Is there any other new/good technologies to do such client side computing ?
Are you talking about web application or desktop application?
If this is a web application, so as far as I know - no. You must use applet embedded at your web page to run the script.
If desktop application - it can use the API for execution processes at Java.
Another option is maybe to download some small server code that will be used to invoke scripts, and have you web application communicate with it, in order to invoke a process.
The downside of this is that this is not a "straightforward" usage of your web application.
I want to run a standalone java application on a remote server. It would not be accessible to clients, but would do background calculations and interact with a database and Secure Socket connection to a third party site. It would also interact with a php site.
Do I have to deploy this with JSP, or can I write a standalone application? If so, how would I deploy a standalone java application (jar file) on a remote server? I understand that I must have them install a jvm on the server (not a problem) but then how would I deploy it (if possible). Would I start it with a command line?
I know I have much to learn, but I am not sure how I would access the command line on a remote server. Through the cPanel?
Thanks.
First of all, you'll want to set up some firewall rules to allow access to that server. I'm hoping that you don't expose that server naked to the Internet.
If all you need is database access exposed on the Internet, I don't see why it can't be a secured web app deployed on a servlet/JSP engine and accessed via a web server. You can leverage basic auth for security, JDBC access to the database from the server, and servlets as controllers to accept requests in a nice REST API.
It'll save you the complications of sockets and inventing your own protocol (use HTTP), starting and stopping the application (now it's just a web server/servlet engine), and deployment (send a WAR file).
Does it really must be a 'standalone' application? I think that in your case the best match would be to use Spring container to load your application within some server (tomcat?) and expose services via standard controllers - with Spring you only have to add some annotations on services methods actually.
Then, your php site can interact with these controllers using for example ajax requests.
If your application is written already, you can easily transform it to run within Spring container. It's very non-invasive and promotes usage of POJOs.
I have a standalone java application which uses java based TCP NIO to collect some information from various clients (not on web/HTTP but through some indigenously developed middleware). Now I have to develop a front-end for the users to perform a lot of querying through HTTP. So is there a way to put this application inside tomcat, so that servlets can invoke required functions on this application ???
The thing is it has to listen on that middleware outside tomcat too and at the same time service servlets inside tomcat. How to do this ??
Putting this application outside tomcat and using RMI is an option but I don’t want to do that.
Can embedding tomcat inside my application is an option ???
The brand-new Tomcat 7 has Embedded version for download.
Tomcat is big. You should try to embed Jetty, which is meant in order to make it possible.
http://jetty.codehaus.org/jetty/
I don't know about embedding Tomcat, but you can embed a servlet container inside your application using embedded Jetty. If what you want is to add an HTTP interface to an existing server, I think that's the way to go.
It also should be perfectly workable to launch your server's TCP listening components from a standard servlet in Tomcat. Then the servlet can call methods in your existing application directly, while it continues to listen to its usual TCP ports.
A third option is to write a servlet that just talks to your existing server in the same way other clients do.
The way you want to go, is to have an embedded web server to your existing application since you just need a little bit of web functionality.
Going the other way is possible. You can use servlet listeners to get started and stopped, and you need to take great care of any thread you start since Tomcat have no idea they exist.
As Traroth said, embedding Jetty is a much better option than doing the same with Tomcat. You have an example and a small tutorial in the Jetty website:
http://docs.codehaus.org/display/JETTY/Embedding+Jetty
You can always open the ports and listen manually if the requests aren't complicated.
Have you considered going the other way? That is embedding your application inside a web application?
Using spring you can instantiate your web application and then inject in into the appropriate web classes (e.g. struts2 actions).
This way you can deploy your web application into any web server that is preconfigured separate from your application.
If you do have to use Tomcat, you're best just making your application as a .war file which when Tomcat is ran will deploy your code. This can then talk to any RMI/middleware you like.
I'm not sure I understand your comment regarding memory spaces.
At a very basic level you have two choices:
Run your appication and the web
application in the same virtual
machine.
Run your application and
the web application in a different
virtual machine
If you take approach 1, you will be able to get instances of your applications classes from the servlets and call methods on them.
Embed tomcat / jetty inside your application. You will start your application normally through its main method. After starting your app you will need to create instances of the tomcat / jetty classes which will start up their own threads.
Embed your application inside a war file to be deployed on tomcat / jetty. Similar to the previous option instead you will need to start your application from a context listener.
If you prefer approach 2; start tomcat / jetty and deploy your web app and separately deploy your application. You'll now have two jvms running. To communicate between these two processes you'll have to use some form of socket communication: OutputStream/InputStream over sockets; RMI; JMX; JMS etc.
I am currently developing an application for some researchers in my university.It's a small java program that you can use by command line. The next step is to package that program and deploy it to an application server. Some clients program will submit requests to the server who will call the tool that I wrote. Lately, we will add more tools to the server and he has to dispatch the requests to the right tool.
Which application server fits my needs ? I have looked for Tomcat, Jetty and Glassfish but it seems that they are only used for web application.
Is it possible to use those servers in some context different from web context? Which package archive should i use (jar, war) ?
Any advice?
Some clients program will submit requests to the server who will call the tool that I wrote.
The big question is what server-side technology and what communication protocol can you use between the clients and the server. You basically have two major options: HTTP and web services (in that case, consider using either JAX-WS or JAX-RS) or RMI-IIOP and EJBs (in that case, you'll have to use a Java EE compliant server like GlassFish).
I have looked for Tomcat, Jetty and Glassfish but it seems that they are only used for web application.
Not really. As I said, they can also be used for web services oriented applications. And GlassFish can be used for EJBs applications.
Which package archive should i use (jar, war)
The packaging will depend on the type of application you'll write, it's not something that you choose upfront, it's just a consequence. EJBs are packaged in an EJB JAR and typically deployed inside an EAR; Servlet based web services are deployed inside a WAR.
You really need to think about what technology to use first (with the current level of detail, I can't provide more guidance).
Do you even need an application server? There's nothing stopping you from adding the necessary network bindings and deploying it on its own.
Of the servers you mention, you've got 2 different categories: servlet containers and full-stack Java EE servers
Tomcat and Jetty are servlet containers. That doesn't mean that you can only do web stuff with them and you could manually add the required libraries to get a full Java EE server.
Glassfish is a full-stack Java EE server and can be compared with JBoss (both are open source) or the commercial rivals Weblogic and Websphere.
Sometimes this question is simple as the environment you are working in mandates a particular flavour of app server. You should check this first.
If you're not forced to use an app server, I'd ask why you think you need to use an app server?
I don't see why you would want to use tomcat, glassfish or jetty for a command line program.
If it's command-line based, and you want it to run server-side, you could write a little program that allows users to, for instance, telnet to your server, which in turn starts the CLI-application in question, and relays input / output to the client.
You may also want to look into Java Webstart, which makes deployment of new versions a breeze.
Actually we can't answer with so few elements.
- What are you planning to do
- With what technologies
- Where are you planning to host your application (have you got budget?)
- In which language are written the clients (even the future ones)?
- Could clients be on mobile phones (add some technlogy constraints...)
....
It would also be great to know what kind of request the clients will do, and what kind of response the server will provide...
Actually with what you tell us, all those application servers can do what you want...
I have looked for Tomcat, Jetty and
Glassfish but it seems that they are
only used for web application
You could even make a webapplication (servlet) and on the clientside use a httpclient to call that servlet... there are so many options :)
vive Paris!