I make a connection for connect to the Database Server (other machine).
Then I found "An error was encountered performing the requested operation:
IO Error: The Network Adapter could not establish the connection
Vendor code 17002".
Please look the picture in URL below.
I tried to make a connection but can't access but my team can access it.
My friend used TNS connection type and I did everthing similar him but can't access. I tried to use JDBC thin for connect but can't also.
I had the old connection which I can connect but why I can't connect the new connection.
You're trying to connect to a machine on a network that SQL Developer is unable to reach.
For a TNS connection,
Look at the appropriate TNSNames entry (you will have a tnsnames.ora) file, and find the IP address or network name associated with the connection you're trying to establish -
And then start by trying to ping that resource.
In this case, i'm trying to talk to a database on MY machine, on port 1521. Yours should look quite different.
If you're using a basic connection, then you can look at the connection properties and see what machine/port you're trying to communicate with.
Ping
If you can't reach that machine from your machine, there's zero chance you can connect to a database there.
So, always start with a ping.
Once you see that you can get to that machine, if you're still getting that message, the next thing to think about is blocked ports, the listener defaults to port 1521, but you'll see that in the TNS descriptor as well.
It usually happens when a another process is running on the same port or there is an absence of listener.
Go to Run>services.msc>OracleXETNSListener>Start
Try to reconnect.. Even if the error still prevail then go to cmd
Use code:
npx kill-port <portnumber>
The port number by default is 1521, but you can check the port number in database properties.
It is possible, that your connection is forbidden by the firewall -
go to Control Panel\System and Security\Windows Defender Firewall - Advanced - Outbound Rules - Add a rule. (If you have some antivirus firewall, add rules there)
Create a temporary TCP rule for your port and another rule for UDP. Allow all nets and comps.
Check the telnet connection as cmd -> telnet ->
open remote.host.address PortNumber
If you can connect now, then the problem IS in firewall - edit your new rules, setting the hosts and nets exactly.
This error is because your sqldeveloper is not able to reach the database server's sql service.
One reason could be lsnrctl is down for some reason.
If you have access to machine where database is installed.
In Windows machine, follow: https://www.youtube.com/watch?v=r9pHqOfV2f0&ab_channel=TLinaTutorials
In Linux/macOS machine: Go to $ORACLE_HOME/bin and check status of lsnrctl
execute from $ORACLE_HOME/bin lsnrctl status, if it's down. Then restart it by lsnrctl start.
Check the details of connection in command output like SID, PORT, HOST etc. and try connecting again from sqldeveloper.
I am facing below issue.
1- I have data source on my local websphere6.1 and when i do test connection from web console server ,it was successful but when i tried to do the same from my application code it giving me error
java.sql.SQLException: Io exception: The Network Adapter could not establish the connectionDSRA0010E: SQL State = null, Error Code = 17,002
Note : I am connecting to remote oracle db in my machine , I have only raid,toad & web sphere installed.
I have already tried following things but issue is yet not resolved.
Replace my server names with the ip addresses.
Change minimum connection setting from web sphere server configuration
The same configuration is running to my other colleague but issue is occurring only on my laptop.
Please any body help me.
Advance thank you
Some things you can try, seeing your error:-
-> Verify that oracledb is started, also verify the port db is listening on is correct.
-> If you have firewall in between and you can disable it, disable it and try. Or else try adding the WAS ports in authorized lists of firewall.
After lot of searching and did lots of trick , i resolved this issue and this solution is Formatting my machine.
Some time there might be issue with network adapter due to this it create problem . I have tried below thing before formatting my machine.
1- Disable my symantic anti-virus but not work.
2- Adding oracle db ip in antivirus configuration and allow all traffic.
3-Tried to change from server admin console by changing (min connection ,max connection , componenet managed authentication
4- Finally ,un-install RAID/websphere . Still again problem persist.
I have spent lot of time and do Much R&D but finally solution come by formatting my laptop.
I resolved the issue after that I've changed the database port that I used to connect at the bd. Check on whitch port your db has been started.
You can check the official IBM developer network issue at:
https://www.ibm.com/developerworks/community/forums/html/topic?id=77777777-0000-0000-0000-000014687717
Regards.
Please change the JVM argument through the WAS Admin console while connecting the JNDI connection. Below is value :
-Djava.net.preferIPv4Stack=true
Path to set JVM:
Go to the server and select Websphere application server and select server name like server1
Select Java and Process Management at the right side
Select Process definition
Select Java Virtual Machine
Enter above value (-Djava.net.preferIPv4Stack=true) in Generic JVM arguments and Save it and restart the server.
It resolved my problem!
This question already has answers here:
com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure
(51 answers)
Closed 6 years ago.
My program that connects to a MySQL database was working fine. Then, without changing any code used to set up the connection, I get this exception:
com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure
The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server.
What happened?
The code used to get the connection:
private static Connection getDBConnection() throws SQLException, InstantiationException, IllegalAccessException, ClassNotFoundException {
String username = "user";
String password = "pass";
String url = "jdbc:mysql://www.domain.com:3306/dbName?connectTimeout=3000";
Class.forName("com.mysql.jdbc.Driver");
Connection conn = DriverManager.getConnection(url, username, password);
return conn;
}
This is a wrapped exception and not really interesting. It is the root cause of the exception which actually tells us something about the root cause. Please look a bit further in the stacktrace. The chance is big that you'll then face a SQLException: Connection refused or SQLException: Connection timed out.
If this is true in your case as well, then all the possible causes are:
IP address or hostname in JDBC URL is wrong.
Hostname in JDBC URL is not recognized by local DNS server.
Port number is missing or wrong in JDBC URL.
DB server is down.
DB server doesn't accept TCP/IP connections.
Something in between Java and DB is blocking connections, e.g. a firewall or proxy.
To solve the one or the either, follow the following advices:
Verify and test them with ping.
Refresh DNS or use IP address in JDBC URL instead.
Verify it based on my.cnf of MySQL DB.
Start it.
Verify if mysqld is started without the --skip-networking option.
Disable firewall and/or configure firewall/proxy to allow/forward the port.
By the way (and unrelated to the actual problem), you don't necessarily need to load the JDBC driver on every getConnection() call. Just only once during startup is enough.
check your wait timeout set on the DB server.
Some times it defaults to 10 seconds. This looses the connection in 10 seconds.
mysql> show global variables like '%time%' ;
update it make it something like 28800
mysql> SET GLOBAL wait_timeout = 28800;
I've been having this issue also for about 8-9 days.
Here's some background: I'm developing a simple Java application that runs in bash.
Details:
Spring 2.5.6
Hibernate3.2.3.ga
With maven.
(The base of the project is from mkyong.com , the spring tutorial without anotations )
MySQL version:
[jvazquez#archbox ~]$ mysql --version
mysql Ver 14.14 Distrib 5.5.9, for Linux (i686) using readline 5.1
Linux archbox 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686 Intel(R) Core(TM)2 Quad CPU Q8200 # 2.33GHz GenuineIntel GNU/Linux
The application works fine in Arch Linux, Mac OS X 10.6, and FreeBSD 7.2.
When I moved the jar file to another arch linux in a different host, using the same mysql, a similar my.cnf, and the similar kernel version, the connection died and obtained the same error as the original poster:
com.mysql.jdbc.exceptions.jdbc4.CommunicationsException:
Communications link failure
I tried every possible combination for this that I found on so and the forums (http://forums.mysql.com/read.php?39,180347,180347#msg-180347 for example, which is closed now and I can't post .. ), specifically:
Triple check that I wasn't using skip
networking. (verified with ps aux
and the my.cnf)
Tried enable log_warnings=1 in the my.cnf but obviously, I wasn't hitting the
server so I didn't saw anything while using the app
SHOW ENGINE innodb STATUS didn't show anything at all; during the tests I could connect via shell, and php also connected to the mysql server
/etc/hosts has localhost 127.0.0.1
Tried the jdbc properties using localhost and 127.0.0.1 with no results
Tried adding c3p0 and changed the max_wait
Max connections in the my.cnf was changed to 900 , 2000 and still nothing my.cnf
Added wait_timeout = 60 my.cnf
Added net_wait_timeout = 360 my.cnf
Added the destroy-method="close" spring.xml
As it was pointed out (if you look up for the same exception , you will find several so threads about the issue Reproduce com.mysql.jdbc.exceptions.jdbc4.CommunicationsException with a setup of Spring, hibernate and C3P0
for example ).
If you are using tomcat, please check the security exception (again, it is on SO, you will find it )
Check that you can resolve that url that you are using
Try adding c3p0.
Verify that there isn't a firewall rejecting your connections
Finally , if you are using GNU/Linux ( ARch linux for example and you indeed obtain this exception )
Try
MySQL Forums :: JDBC and Java :: EOFException: Can not read response from server. Expected to read 4 bytes, read 0 bytes before connection was unexpectedly lost
If the link get's removed, just add mysqld:ALL to /etc/hosts.allow
I know that is a bit extense, but it may help anybody using GNU/Linux and having this exception and this thread seemed the best place to post my research.
Hope it helps
I got the same error
but then I figured it out its because the Mysql server is not running at that time.
So to change the status of the server
Go to Task Manager
Go to Services
then search for your Mysql server(eg:for my case its MYSQL56)
then you will see under the status column it says its not running
by right clicking and select start
Hope this will help.
We have a piece of software (webapp with Tomcat) using Apache commons connection pooling, and worked great for years. In the last month I had to update the libraries due to an old bug we were encountering. The bug had been fixed in a recent version.
Shortly after deploying this, we started getting exactly these messages. Out of the thousands of connections we'd get a day, a handful (under 10, usually) would get this error message. There was no real pattern, except they would sometimes cluster in little groups of 2 to 5.
I changed the options to on the pool to validate the connection every time one is taken from or put back in the pool (if one is found bad, a new one is generated instead) and the problem went away.
Have you updated your MySQL jar lately? It seems like there may be a new setting that didn't used to be there in our (admittedly very old) jar.
I agree with BalusC to try some other options on your config, such as those you're passing to MySQL (in addition to the connection timeout).
If this failure is transient like mine was, instead of permanent, then you could use a simple try/catch and a loop to keep trying until things succeed or use a connection pool to handle that detail for you.
Other random idea: I don't know what happens why you try to use a closed connection (which exception you get). Could you be accidentally closing the connection somewhere?
Ensure skip-networking is commented out in my.cnf/my.ini
As BalusC mentioned, it would be very useful to post the full stacktrace (always post a full stacktrace, it is useless and frustrating to have only the first lines of a stacktrace).
Anyway, you mentioned that your code was working fine and that this problem started suddenly to occur without any code change so I'm wondering if this could be related to you other question Problem with not closing db connection while debugging? Actually, if this problem started while debugging, then I think it is (you ran out of connections). In that case, restart you database server (and follow the suggestions of the other question to avoid this situation).
I encountered same problem. I am using spring & dbcp & mysql 5.5But If I change localhost to 192.168.1.110 then everything works. What make things more weird is mysql -h localhost just works fine.
update: Finally found a solution. Changing bindaddress to localhost or 127.0.0.1 in my.conf will fix the problem.
In my case, the local loopback interface wasn't started, so "localhost" couldn't be resolved.
You can check this by running "ifconfig" and you should see an interface called "lo". If it is not up, you can activate it by running "ifup lo" or "ifconfig lo up".
In my case, the mysql.com downloaded Connector/J 5.1.29 .jar had this error whereas the 5.1.29 .jar downloaded from the MvnRepository did not.
This happened when building a Google appengine application in Android Studio (gradle, Windows x64), communicating to a Linux MySQL server on the local network/local VM.
I see you are connecting to a remote host. Now the question is what type of a network are you using to connect to the internet?
WINDOWS
If it's a mobile broadband device then get your machines IP address and add it to your hosting server so that your host server can allow connections coming from your machine.[your host might have turned this off due to security reasons].
Note that every time you use a different network device your IP changes.
If you are using a LAN then set a static IP address on your machine then add it to your host.
I hope this helps!! :)
I got the communications failure error when using a java.sql.PreparedStatement with a specific statement.
This was running against MySQL 5.6, Tomcat 7.0.29 and JDK 1.7.0_67 on a Windows 7 x64 machine.
The cause turned out to be setting an integer to a string parameter and a string to an integer parameter then trying to perform executeQuery on the prepared statement. After I corrected the order of parameter setting the statement performed correctly.
This had nothing to do with network issues as the wording of the error message suggested.
The escential problem is that Mysql JDBC pool connections is not used, then the Timeout from Mysql, close the Connections. You need change the pool Parameters to get restart connection when the connection has failures, on this way:
Connection Validation: Required (Check)
Validation Method: autocommit
You can change the Validation Method if you cannot get it works!
If you use WAMP, make sure it is online. What I did was, first turned my firewall off, then it worked, so after that I allowed connection for all local ports, specially port 80. Than I got rid of this problem. For me it was the Firewall who was blocking the connection.
I had the same problem and I used most of the params (autoreconnect etc..), but didn't try the (test_on_idle, or test_on_connect) , I am going to do them next.
However, I had this hack that got me through this:
I have a cron job called Healthcheck, It wakes up every 10 mins and makes a REST API call to the server. The web / app server picks this up, connects to the db, makes a small change and comes back with a 'yes all quiet on western front' or 'shitshappening'. When the latter, it sends a pager / email to the right people.
It has the side effect of always keeping the db connection pool fresh. So long as this cron is running, I don't have the db connection timeout issues. otherwise, they crop up.
I am getting the error: "The Network Adapter could not establish the connection" from a web application deployed in Oracle Application Server 10g. The database is local, so there shouldn't be any connection issues.
First test: I can connect to the DB no problem from SQL plus, run queries, etc.
Second test: I can connect to the database no problem from a locally installed JDeveloper on the server, and run queries, etc. no problem. This works with the short JDBC scring, and the long one (shown below).
jdbc:oracle:thin:#(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=abcd)(SERVER=DEDICATED)))
Yet when I run the web app, it gives the above error. It seems too generic for me to do anything about.
Any suggestions on how to solve this? I assume that Oracle logs failed connection attempts somewhere, but I couldn't find anything relevant in the databases alert.log file.
It is possible that the problem is that the application is using an old jsdk, but I would assume that then some version mismatch error would be given instead of a "network connection" message.
Edit: I don't know whether this is an OAS problem or a problem with the specific Web Application, I would like to figure this out first, as it seems it should be easy. In WebSphere, there is a "test connection" button to dest data-sources you have added, but it seems there is no such functionality in OAS10? Somehow I think there must be, and I am just missing it because I am not an OAS expert.
Edit 2: I installed JDevelop on a remote machine and connected to the database with no problems, so I know for sure it isn't an issue with the database connectivity itself - it seems like it must be a problem within OAS?
I faced similar problem(able to connect through client but not web application) with Oracle XE when running with default configuration. Increasing number of sessions and processes solved my problem. Check this http://www.markcallen.com/oracle/oracle-xe-tuning.
I assume that Oracle logs failed connection attempts somewhere
It would show up in listener.log, but with the error you get, it seems doubtful that JDBC could even contact the listener.
jdbc:oracle:thin:#(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=localhost)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=abcd)(SERVER=DEDICATED)))
Is that the same string you use for the web app?
I've had issues with localhost and 127.0.0.1 which go away when using a more definitive host name or address [IE a name that other machines would know the host as.]. I think it was to do with how the name was resolved (eg locally or off to a name server or similar).
Not a java person, but is there any way to simply ping localhost/127.0.0.1 from the java and see whether there's a response.
One of the ways to fix the issueis to update Hosts file at WAS Server with entries for DB servers as shown below:
111.222.333.444 serverab.abc.com serverab
I am having a problem with Java DB that I just don't know how to resolve. I am creating a DB and connecting to it using Java DB's native JDBC driver. If I relocate that database physically and try to connect to it using its new path, I consistently get XJ004 errors:
ERROR XJ004: Database 'blahblah' not found.
I am sure I am using the correct connection string. Is there any possibility the DB is somehow getting corrupted? Or is there some encoding of the DB path in the DB such that if you relocate a Java DB it gets confused?
I'm really at a loss here. :( Please help!
Jim
Have you verified that this error message isn't also used when there's no listener on the host machine ... and were you using JavaDB on your local machine before the relocation? Many database systems (and I'm not that familiar with JavaDB) ship set-up to only allow connections from localhost for security reasons. On PostgreSQL for instance, you have to allow TCP connections and bounce the daemon to obtain a remote connection.
Anyway ... since the problem started when you when remote, look for issues related to that first! (And if you can run your application on the remote machine, does that work?)
There must be a file named derby.log somewhere. Check the error there. If it is not detailed enough, try setting derby.stream.error.logSeverityLevel to a lower value. See the manual for more information.