I have a uint8 (unsigned 8 bit integer) coming in from a UDP packet. Java only uses signed primitives. How do I parse this data structure correctly with java?
Simply read it as as a byte and then convert to an int.
byte in = udppacket.getByte(0); // whatever goes here
int uint8 = in & 0xFF;
The bitmask is needed, because otherwise, values with bit 8 set to 1 will be converted to a negative int. Example:
This: 10000000
Will result in: 11111111111111111111111110000000
So when you afterwards apply the bitmask 0xFF to it, the leading 1's are getting cancelled out. For your information: 0xFF == 0b11111111
0xFF & number will treat the number as unsigned byte. But the resultant type is int
You can store 8-bit in a byte If you really need to converted it to an unsigned value (and often you don't) you can use a mask
byte b = ...
int u = b & 0xFF; // unsigned 0 .. 255 value
You can do something like this:
int value = eightBits & 0xff;
The & operator (like all integer operators in Java) up-casts eightBits to an int (by sign-extending the sign bit). Since this would turn values greater than 0x7f into negative int values, you need to then mask off all but the lowest 8 bits.
You could simply parse it into a short or an int, which have enough range to hold all the values of an unsigned byte.
Related
I am trying to convert a signed byte in unsigned. The problem is the data I am receiving is unsigned and Java does not support unsigned byte, so when it reads the data it treats it as signed.
I tried it to convert it by the following solution I got from Stack Overflow.
public static int unsignedToBytes(byte a)
{
int b = a & 0xFF;
return b;
}
But when again it's converted in byte, I get the same signed data. I am trying to use this data as a parameter to a function of Java that accepts only a byte as parameter, so I can't use any other data type. How can I fix this problem?
The fact that primitives are signed in Java is irrelevant to how they're represented in memory / transit - a byte is merely 8 bits and whether you interpret that as a signed range or not is up to you. There is no magic flag to say "this is signed" or "this is unsigned".
As primitives are signed the Java compiler will prevent you from assigning a value higher than +127 to a byte (or lower than -128). However, there's nothing to stop you downcasting an int (or short) in order to achieve this:
int i = 200; // 0000 0000 0000 0000 0000 0000 1100 1000 (200)
byte b = (byte) 200; // 1100 1000 (-56 by Java specification, 200 by convention)
/*
* Will print a negative int -56 because upcasting byte to int does
* so called "sign extension" which yields those bits:
* 1111 1111 1111 1111 1111 1111 1100 1000 (-56)
*
* But you could still choose to interpret this as +200.
*/
System.out.println(b); // "-56"
/*
* Will print a positive int 200 because bitwise AND with 0xFF will
* zero all the 24 most significant bits that:
* a) were added during upcasting to int which took place silently
* just before evaluating the bitwise AND operator.
* So the `b & 0xFF` is equivalent with `((int) b) & 0xFF`.
* b) were set to 1s because of "sign extension" during the upcasting
*
* 1111 1111 1111 1111 1111 1111 1100 1000 (the int)
* &
* 0000 0000 0000 0000 0000 0000 1111 1111 (the 0xFF)
* =======================================
* 0000 0000 0000 0000 0000 0000 1100 1000 (200)
*/
System.out.println(b & 0xFF); // "200"
/*
* You would typically do this *within* the method that expected an
* unsigned byte and the advantage is you apply `0xFF` only once
* and than you use the `unsignedByte` variable in all your bitwise
* operations.
*
* You could use any integer type longer than `byte` for the `unsignedByte` variable,
* i.e. `short`, `int`, `long` and even `char`, but during bitwise operations
* it would get casted to `int` anyway.
*/
void printUnsignedByte(byte b) {
int unsignedByte = b & 0xFF;
System.out.println(unsignedByte); // "200"
}
I'm not sure I understand your question.
I just tried this and for byte -12 (signed value) it returned integer 244 (equivalent to unsigned byte value but typed as an int):
public static int unsignedToBytes(byte b) {
return b & 0xFF;
}
public static void main(String[] args) {
System.out.println(unsignedToBytes((byte) -12));
}
Is it what you want to do?
Java does not allow to express 244 as a byte value, as would C. To express positive integers above Byte.MAX_VALUE (127) you have to use a different integral type, like short, int or long.
Complete guide for working with unsigned bytes in Java:
Unsigned byte in Java
(Source for this answer.)
The Java Language does not provide anything like the unsigned keyword. A byte according to the language spec represents a value between −128 - 127. For instance, if a byte is cast to an int Java will interpret the first bit as the sign and use sign extension.
That being said, nothing prevents you from viewing a byte simply as 8 bits and interpret those bits as a value between 0 and 255. Just keep in mind that there's nothing you can do to force your interpretation upon someone else's method. If a method accepts a byte, then that method accepts a value between −128 and 127 unless explicitly stated otherwise.
Here are a couple of useful conversions / manipulations for your convenience:
Conversions to / from int
// From int to unsigned byte
int i = 200; // some value between 0 and 255
byte b = (byte) i; // 8 bits representing that value
// From unsigned byte to int
byte b = 123; // 8 bits representing a value between 0 and 255
int i = b & 0xFF; // an int representing the same value
(Or, if you're on Java 8+, use Byte.toUnsignedInt.)
Parsing / formatting
Best way is to use the above conversions:
// Parse an unsigned byte
byte b = (byte) Integer.parseInt("200");
// Print an unsigned byte
System.out.println("Value of my unsigned byte: " + (b & 0xFF));
Arithmetics
The 2-complement representation "just works" for addition, subtraction and multiplication:
// two unsigned bytes
byte b1 = (byte) 200;
byte b2 = (byte) 15;
byte sum = (byte) (b1 + b2); // 215
byte diff = (byte) (b1 - b2); // 185
byte prod = (byte) (b2 * b2); // 225
Division requires manual conversion of operands:
byte ratio = (byte) ((b1 & 0xFF) / (b2 & 0xFF));
There are no primitive unsigned bytes in Java. The usual thing is to cast it to bigger type:
int anUnsignedByte = (int) aSignedByte & 0xff;
I think the other answers have covered memory representation and how you handle these depends on the context of how you plan on using it. I'll add that Java 8 added some support for dealing with unsigned types. In this case, you could use Byte.toUnsignedInt
int unsignedInt = Byte.toUnsignedInt(myByte);
A side note, if you want to print it out, you can just say
byte b = 255;
System.out.println((b < 0 ? 256 + b : b));
You can also:
public static int unsignedToBytes(byte a)
{
return (int) ( ( a << 24) >>> 24);
}
Explanation:
let's say a = (byte) 133;
In memory it's stored as: "1000 0101" (0x85 in hex)
So its representation translates unsigned=133, signed=-123 (as 2's complement)
a << 24
When left shift is performed 24 bits to the left, the result is now a 4 byte integer which is represented as:
"10000101 00000000 00000000 00000000" (or "0x85000000" in hex)
then we have
( a << 24) >>> 24
and it shifts again on the right 24 bits but fills with leading zeros. So it results to:
"00000000 00000000 00000000 10000101" (or "0x00000085" in hex)
and that is the unsigned representation which equals to 133.
If you tried to cast a = (int) a;
then what would happen is it keeps the 2's complement representation of byte and stores it as int also as 2's complement:
(int) "10000101" ---> "11111111 11111111 11111111 10000101"
And that translates as: -123
Although it may seem annoying (coming from C) that Java did not include unsigned byte in the language it really is no big deal since a simple "b & 0xFF" operation yields the unsigned value for (signed) byte b in the (rare) situations that it is actually needed. The bits don't actually change -- just the interpretation (which is important only when doing for example some math operations on the values).
If think you are looking for something like this.
public static char toUnsigned(byte b) {
return (char) (b >= 0 ? b : 256 + b);
}
Adamski provided the best answer, but it is not quite complete, so read his reply, as it explains the details I'm not.
If you have a system function that requires an unsigned byte to be passed to it, you can pass a signed byte as it will automatically treat it as an unsigned byte.
So if a system function requires four bytes, for example, 192 168 0 1 as unsigned bytes you can pass -64 -88 0 1, and the function will still work, because the act of passing them to the function will un-sign them.
However you are unlikely to have this problem as system functions are hidden behind classes for cross-platform compatibility, though some of the java.io read methods return unsighed bytes as an int.
If you want to see this working, try writing signed bytes to a file and read them back as unsigned bytes.
I am trying to use this data as a parameter to a function of Java that accepts only a byte as parameter
This is not substantially different from a function accepting an integer to which you want to pass a value larger than 2^32-1.
That sounds like it depends on how the function is defined and documented; I can see three possibilities:
It may explicitly document that the function treats the byte as an unsigned value, in which case the function probably should do what you expect but would seem to be implemented wrong. For the integer case, the function would probably declare the parameter as an unsigned integer, but that is not possible for the byte case.
It may document that the value for this argument must be greater than (or perhaps equal to) zero, in which case you are misusing the function (passing an out-of-range parameter), expecting it to do more than it was designed to do. With some level of debugging support you might expect the function to throw an exception or fail an assertion.
The documentation may say nothing, in which case a negative parameter is, well, a negative parameter and whether that has any meaning depends on what the function does. If this is meaningless then perhaps the function should really be defined/documented as (2). If this is meaningful in an nonobvious manner (e.g. non-negative values are used to index into an array, and negative values are used to index back from the end of the array so -1 means the last element) the documentation should say what it means and I would expect that it isn't what you want it to do anyway.
I happened to accidentally land on this page after wondering about the apparent asymmetry of the netty ByteBuf writeInt and readUnsignedInt methods.
After reading the interesting and educational answers I am still wondering what function you were calling when you said:
I am trying to use this data as a parameter to a function of Java that
accepts only a byte as parameter.
For what it's worth after so many years, here is my fifty cents:
Let's assume the method you are calling is updating some balance with micro amounts and that it behaves according to some well-defined set of requirements. Ie, it is considered to have a correct implementation for its intended behavior:
long processMicroPayment(byte amount) {
this.balance += amount;
return balance;
}
Basically, if you supply a positive amount it will be added to the balance, and a negative amount will effectively be subtracted from the balance. Now because it accepts a byte as its parameter the implicit assumption is that it functionally only accepts amounts between -128 and +127. So if you want to use this method to add, say, 130 to the balance, it simply will not produce the result YOU desire, because there is no way within the implementation of this method to represent an amount higher than 127. So passing it 130 will not result in your desired
behavior. Note that the method has no way of implementing a (say) AmountOutOfBoundsException because 130 will be 'interpreted' as a negative value that is still obeying the method's contract.
So I have the following questions:
are you using the method according to its (implicit or explicit) contract?
is the method implemented correctly?
am I still misunderstanding your question?
There is no unsigned byte in Java, but if you want to display a byte, you can do,
int myInt = 144;
byte myByte = (byte) myInt;
char myChar = (char) (myByte & 0xFF);
System.out.println("myChar :" + Integer.toHexString(myChar));
Output:
myChar : 90
For more information, please check, How to display a hex/byte value in Java.
Yes and no. Ive been digging around with this problem.
Like i understand this:
The fact is that java has signed interger -128 to 127..
It is possible to present a unsigned in java with:
public static int toUnsignedInt(byte x) {
return ((int) x) & 0xff;
}
If you for example add -12 signed number to be unsigned you get 244. But you can use that number again in signed, it has to be shifted back to signed and it´ll be again -12.
If you try to add 244 to java byte you'll get outOfIndexException.
Cheers..
If you have a function which must be passed a signed byte, what do you expect it to do if you pass an unsigned byte?
Why can't you use any other data type?
Unsually you can use a byte as an unsigned byte with simple or no translations. It all depends on how it is used. You would need to clarify what you indend to do with it.
As per limitations in Java, unsigned byte is almost impossible in the current data-type format. You can go for some other libraries of another language for what you are implementing and then you can call them using JNI.
If you want unsigned bytes in Java, just subtract 256 from the number you're interested in. It will produce two's complement with a negative value, which is the desired number in unsigned bytes.
Example:
int speed = 255; //Integer with the desired byte value
byte speed_unsigned = (byte)(speed-256);
//This will be represented in two's complement so its binary value will be 1111 1111
//which is the unsigned byte we desire.
You need to use such dirty hacks when using leJOS to program the NXT brick.
I was reading through examples trying to understand how to convert signed bytes to unsigned integer counter parts.
The most popular method that I have come across is:
a & 0xFF
Where a is the signed byte.
My question is why is 0xFF stored as unsigned? Are all hex values stored as unsigned? If so why?
And how does "and"-ing turn off the sign bit in the sign integer?
It would be great if someone could break down the process step by step.
You probably saw this in code that converted a byte to an integer, where they wanted to treat the byte as an unsigned value in the range 0-255. It does not apply to integers in general. If you want to make an integer a "unsigned", you can do:
int unsignedA = a & 0x7FFFFFFF;
This will ensure that unsignedA is positive - but it does that by chopping off the high bit, so for example if a was -1, then unsignedA is Integer.MAX_VALUE.
There is no way to turn a 32-bit signed Java integer into a 32-bit unsigned Java integer because there is no datatype in Java for a 32-bit unsigned integer. The only unsigned integral datatype in Java is 16 bits long: char.
If you want to store a 32-bit unsigned integral value in Java, you need to store it in a long:
long unsignedA = a & 0xFFFFFFFFL;
To elaborate on Erwin's answer about converting a byte to an integer: In Java, byte is a signed integer type. That means it has values in the range -128 to 127. If you say:
byte a;
int b;
a = -64;
b = a;
The language will preserve the value; that is, it will set b to -64.
But if you really want to convert your byte to a value from 0 to 255 (which I guess you call the "unsigned counterpart" of the byte value), you can use a & 0xFF. Here's what happens:
Java does not do arithmetic directly on byte or short types. So when it sees a & 0xFF, it converts both sides to an int. The hex value of a, which is a byte, looks like
a = C0
When it's converted to a 32-bit integer, the value (-64) has to be preserved, so that means the 32-bit integer has to have 1 bits in the upper 24 bits. Thus:
a = C0
(int)a = FFFFFFC0
But then you "and" it with 0xFF:
a = C0
(int)a = FFFFFFC0
& 000000FF
--------
a & FF = 000000C0
And the result is an integer in the range 0 to 255.
In Java, literals (1, 0x2A, etc) are positive unless you explicitly indicate that they are negative. It's how we intuitively write numbers.
This previous question answers you question about converting to unsigned. Understanding Java unsigned numbers
I am trying to read binary data (Doom WAD files), which contain a lot of unsigned short and unsigned byte values.
At the moment I read the file into a byte[], wrap a ByteBuffer with little-endian order around it and access the values by bbuf.getShort() etc. respectively.
Converting those e. g. to 2D-coordinates is not a problem, because in the end it won't matter if they range eg. from -128 to 128 or from 0 to 256, but more often the short values are used as array indices and short/byte values as flags/, so I need a fast way to treat them as signed types.
I know, Java doesn't have unsigned types "for sake of simplicity...".
Can you make any suggestions?
In order to save unsigned ints you need a long. Then you need to truncate last 32 bits. You can use following trick to do it.
final long UNSIGNED_INT_BITS = 0xffffffffL;
int a = -3;
long b = UNSIGNED_INT_BITS & a;
System.out.println(a);
System.out.println(b);
System.out.println(Long.toHexString(UNSIGNED_INT_BITS));
Output:
-3
4294967293
ffffffff
If all else fails, you could always store them internally as ints and make sure you do proper conversion when reading/writing.
(Read as byte/short, cast to int, add 2^bits if negative. Just truncate to 8/16 bits when writing.)
Hardly the most elegant solution, I admit.
If you need to interprete 0xFF byte as 256 do the following
int n = b & 0xFF;
I have a question about initializing byte in java, I want to initialize a byte value allBitsOne and all bits of it are 1:
Method 1:
byte allBitsOne = 0xFF;
Wrong, it says that 0xFF is a integer type and over the range of byte, so i do it like below
Method 2:
byte allBitsOne = (byte)0xFF;
Works fine.
Method 3:
byte allBitsOne = 0xFFFFFFFF;
It works fine as well, but if 0xFF exceeds the range of a byte, why doesn't 0xFFFFFFFF?
Thank you all, I found this: link
byte is a signed integer type, going from -128 to 127.
0xFF is 255, so it's larger than 127.
0xFFFFFFFF is -1, so it's within the bounds of the byte type.
See http://en.wikipedia.org/wiki/Two%27s_complement
literal integers in Java are signed 32 bit numbers, so:
0xff is an integer type which equals to 255, which is over the limit for byte.
0xffffffff is an integer type which equals to -1, which is not over the limit for byte.
the byte-variable in the java in the java can hold the values from -128 to 127.
if you want to set all the bit to 1. then u can store the -128 to it.
Is there a way to declare an unsigned int in Java?
Or the question may be framed as this as well:
What is the Java equivalent of unsigned?
Just to tell you the context I was looking at Java's implementation of String.hashcode(). I wanted to test the possibility of collision if the integer were 32 unsigned int.
Java does not have a datatype for unsigned integers.
You can define a long instead of an int if you need to store large values.
You can also use a signed integer as if it were unsigned. The benefit of two's complement representation is that most operations (such as addition, subtraction, multiplication, and left shift) are identical on a binary level for signed and unsigned integers. A few operations (division, right shift, comparison, and casting), however, are different. As of Java SE 8, new methods in the Integer class allow you to fully use the int data type to perform unsigned arithmetic:
In Java SE 8 and later, you can use the int data type to represent an unsigned 32-bit integer, which has a minimum value of 0 and a maximum value of 2^32-1. Use the Integer class to use int data type as an unsigned integer. Static methods like compareUnsigned, divideUnsigned etc have been added to the Integer class to support the arithmetic operations for unsigned integers.
Note that int variables are still signed when declared but unsigned arithmetic is now possible by using those methods in the Integer class.
Whether a value in an int is signed or unsigned depends on how the bits are interpreted - Java interprets bits as a signed value (it doesn't have unsigned primitives).
If you have an int that you want to interpret as an unsigned value (e.g. you read an int from a DataInputStream that you know should be interpreted as an unsigned value) then you can do the following trick.
int fourBytesIJustRead = someObject.getInt();
long unsignedValue = fourBytesIJustRead & 0xffffffffL;
Note, that it is important that the hex literal is a long literal, not an int literal - hence the 'L' at the end.
We needed unsigned numbers to model MySQL's unsigned TINYINT, SMALLINT, INT, BIGINT in jOOQ, which is why we have created jOOU, a minimalistic library offering wrapper types for unsigned integer numbers in Java. Example:
import static org.joou.Unsigned.*;
// and then...
UByte b = ubyte(1);
UShort s = ushort(1);
UInteger i = uint(1);
ULong l = ulong(1);
All of these types extend java.lang.Number and can be converted into higher-order primitive types and BigInteger. Hope this helps.
(Disclaimer: I work for the company behind these libraries)
For unsigned numbers you can use these classes from Guava library:
UnsignedInteger
UnsignedLong
They support various operations:
plus
minus
times
mod
dividedBy
The thing that seems missing at the moment are byte shift operators. If you need those you can use BigInteger from Java.
Perhaps this is what you meant?
long getUnsigned(int signed) {
return signed >= 0 ? signed : 2 * (long) Integer.MAX_VALUE + 2 + signed;
}
getUnsigned(0) → 0
getUnsigned(1) → 1
getUnsigned(Integer.MAX_VALUE) → 2147483647
getUnsigned(Integer.MIN_VALUE) → 2147483648
getUnsigned(Integer.MIN_VALUE + 1) → 2147483649
Use char for 16 bit unsigned integers.
There are good answers here, but I don’t see any demonstrations of bitwise operations. Like Visser (the currently accepted answer) says, Java signs integers by default (Java 8 has unsigned integers, but I have never used them). Without further ado, let‘s do it...
RFC 868 Example
What happens if you need to write an unsigned integer to IO? Practical example is when you want to output the time according to RFC 868. This requires a 32-bit, big-endian, unsigned integer that encodes the number of seconds since 12:00 A.M. January 1, 1900. How would you encode this?
Make your own unsigned 32-bit integer like this:
Declare a byte array of 4 bytes (32 bits)
Byte my32BitUnsignedInteger[] = new Byte[4] // represents the time (s)
This initializes the array, see Are byte arrays initialised to zero in Java?. Now you have to fill each byte in the array with information in the big-endian order (or little-endian if you want to wreck havoc). Assuming you have a long containing the time (long integers are 64 bits long in Java) called secondsSince1900 (Which only utilizes the first 32 bits worth, and you‘ve handled the fact that Date references 12:00 A.M. January 1, 1970), then you can use the logical AND to extract bits from it and shift those bits into positions (digits) that will not be ignored when coersed into a Byte, and in big-endian order.
my32BitUnsignedInteger[0] = (byte) ((secondsSince1900 & 0x00000000FF000000L) >> 24); // first byte of array contains highest significant bits, then shift these extracted FF bits to first two positions in preparation for coersion to Byte (which only adopts the first 8 bits)
my32BitUnsignedInteger[1] = (byte) ((secondsSince1900 & 0x0000000000FF0000L) >> 16);
my32BitUnsignedInteger[2] = (byte) ((secondsSince1900 & 0x000000000000FF00L) >> 8);
my32BitUnsignedInteger[3] = (byte) ((secondsSince1900 & 0x00000000000000FFL); // no shift needed
Our my32BitUnsignedInteger is now equivalent to an unsigned 32-bit, big-endian integer that adheres to the RCF 868 standard. Yes, the long datatype is signed, but we ignored that fact, because we assumed that the secondsSince1900 only used the lower 32 bits). Because of coersing the long into a byte, all bits higher than 2^7 (first two digits in hex) will be ignored.
Source referenced: Java Network Programming, 4th Edition.
It seems that you can handle the signing problem by doing a "logical AND" on the values before you use them:
Example (Value of byte[] header[0] is 0x86 ):
System.out.println("Integer "+(int)header[0]+" = "+((int)header[0]&0xff));
Result:
Integer -122 = 134
Just made this piece of code, wich converts "this.altura" from negative to positive number. Hope this helps someone in need
if(this.altura < 0){
String aux = Integer.toString(this.altura);
char aux2[] = aux.toCharArray();
aux = "";
for(int con = 1; con < aux2.length; con++){
aux += aux2[con];
}
this.altura = Integer.parseInt(aux);
System.out.println("New Value: " + this.altura);
}
You can use the Math.abs(number) function. It returns a positive number.