I would like to change the default HTTP port using the wildfly-maven-plugin to 8380. Usually, I can do that changing the offset, but this is not working, my changes are ignored and HTTP port continues on 8080.
I'm starting wildfly in the same maven project, because this is way more practical (download and start automatically). Just like that:
mvn wildfly:run -Dwildfly.version=10.1.0.Final
My project contains JAR, WAR and EAR. Classic structure.
As I understood from another SO questions, I need to put the plugin entry in each pom.xml that needs to be ignored, putting <skip>true</skip> in pom.xml of the: root, WAR and JAR. Just like that:
<plugin>
<groupId>org.wildfly.plugins</groupId>
<artifactId>wildfly-maven-plugin</artifactId>
<version>1.2.1.Final</version>
<configuration>
<skip>true</skip>
</configuration>
</plugin>
If I not skip this guys, the Wildfly try to deploy the JAR/WAR/Root, what is not my objective. I would like to deploy only the EAR.
To do that, I use the <skip>false</skip> only for pom.xml of the EAR:
<plugin>
<groupId>org.wildfly.plugins</groupId>
<artifactId>wildfly-maven-plugin</artifactId>
<version>1.2.1.Final</version>
<configuration>
<skip>false</skip>
</configuration>
</plugin>
The localhost:8080/app/ works well after that.
But if I try to change the offset or http port, nothing different happens. This is some of the args that I already try on <configuration/> without success:
<server-args>
<server-arg>-Djboss.socket.binding.port-offset=300</server-arg>
</server-args>
<jvmArgs>-Djboss.socket.binding.port-offset=300</jvmArgs>
<jvmArgs>-Djboss.http.port=8380</jvmArgs>
The change that have some effect was:
<serverConfig>standalone.xml</serverConfig>
<server-args>
<server-arg>-Djboss.socket.binding.port-offset=300</server-arg>
</server-args>
<filename>${project.build.finalName}.ear</filename>
This also have changed the port (jvmArgs is deprecated):
<javaOpts>-Djboss.socket.binding.port-offset=300</javaOpts>
But in both cases the EAR application is not deployed...
Any idea? Thanks!
Finally, I found the solution.
The jvmArgs is deprecated. I used javaOpts:
<plugin>
<groupId>org.wildfly.plugins</groupId>
<artifactId>wildfly-maven-plugin</artifactId>
<version>1.2.1.Final</version>
<configuration>
<skip>false</skip>
<javaOpts>-Djboss.http.port=8380</javaOpts>
<filename>${project.build.finalName}.ear</filename>
</configuration>
</plugin>
Works!
You can use too:
<javaOpts>
<javaOpt>-agentlib:jdwp=transport=dt_socket,address=9087,server=y,suspend=n</javaOpt>
<javaOpt>-Djboss.http.port=8380</javaOpt>
</javaOpts>
To use more than one option for the JVM. In this example above I'm showing how to include a parameter to debug the Wildfly using the maven plugin.
But it's still a mistery why the EAR is not deployed when I use the offset configuration.
try not skipping the configuration :D
<plugin>
<groupId>org.wildfly.plugins</groupId>
<artifactId>wildfly-maven-plugin</artifactId>
<version>1.2.1.Final</version>
<configuration>
<port>8380</port>
</configuration>
</plugin>
I am developing a webapp running on Tomcat7, and using maven for dependencies/automated builds. Yesterday I started using the sass-maven-plugin, which is great. Its goal sass:update-stylesheets processes sass files and outputs css. Unfortunately, I can't have it executed during the webapp packaging. I am pretty new to maven too, so I might have missed something. Here's my understanding :
when I type mvn tomcat7:deploy, maven executes the deploy goal defined in the tomcat7 plugin
this plugin goes through some phases of the development lifecycle. More specifically, as mentioned in the doc, it "invokes the execution of the lifecycle phase package prior to executing itself."
if I map the goal sass:update-stylesheets to the package phase in <build><executions/></build>, it should be executed everytime I deploy/redeploy my app.
When I run mvn sass:update-stylesheets independently of tomcat7:deploy, everything is smooth. sass-maven-plugin gets the .scss files from src/main/resources, processes them and places the output in src/main/webapp/resources, where I want it to be to be deployed with my webapp. Unfortunately, if I don't run the command prior to tomcat7:deploy, I don't get any css for my pages. What did I get wrong? Also, is there any way I could map the sass:update-stylesheets to the phase process-resources, for instance, which would make more sense? Lastly, if this all works, will Eclipse's incremental build pick it up?
Here's my pom.xml (the relevant parts)
...
<pluginManagement>
<plugins>
<plugin>
<groupId>org.apache.tomcat.maven</groupId>
<artifactId>tomcat7-maven-plugin</artifactId>
<version>2.2</version>
<configuration>
...
</configuration>
</plugin>
<!-- SASS processing -->
<plugin>
<groupId>org.jasig.maven</groupId>
<artifactId>sass-maven-plugin</artifactId>
<version>1.1.1</version>
<executions>
<execution>
<id>generate-css</id>
<phase>package</phase>
<goals>
<goal>update-stylesheets</goal>
</goals>
</execution>
</executions>
<configuration>
<useCompass>true</useCompass>
<resources>
<resource>
<source>
<directory>${basedir}/src/main/resources</directory>
</source>
<destination>${basedir}/src/main/webapp/resources</destination>
</resource>
</resources>
</configuration>
</plugin>
</plugins>
</pluginManagement>
</build>
Thanks in advance for your help.
You have configured the stuff in the plugin management section. Please move the execution and it's binding to the build section (that is, out of the pluginManagement's plugins section into build's plugins section).
I am using mvn2, when I am trying to deploy my project using mvn:deploy command I am having error can not invoke Tomcat manager connection refused: connect below is my pom configuration
<plugin>
<groupId>org.apache.tomcat.maven</groupId>
<artifactId>tomcat6-maven-plugin</artifactId>
<version>2.0</version>
<configuration>
<url>http://localhost/manager</url>
<path>/scgtwitter</path>
<server>QA</server>
</configuration>
</plugin>
What could be the possible solutions?
The error indicates that either tomcat isn't up and running (so start it), or maybe your config is wrong.
Although I have not used that particular plugin, I have used a similar one, I imagine the principal is essentially the same. This what I have:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>tomcat-maven-plugin</artifactId>
<configuration>
<server>localTomcat</server>
<path>/</path>
</configuration>
</plugin>
And in the ~/.m2/settings.xml, I have supplied the username/password for the tomcat manager app:
<servers>
<server>
<id>localTomcat</id>
<username>tomcat</username>
<password>tomcat</password>
</server>
</servers>
Run with with
mvn tomcat:deploy
or
mvn tomcat:redeploy
The "install" goal copies the artifact to the target directory and to the local repository.
How can I tell Maven to copy it also to a given directory (like the deploy directory of JBoss for example).
The goal copy of maven-dependency-plugin does what you want, see the example.
It is however not a good idea to copy anything outside your target directory (or ${project.build.directory} to be precise) - especially if such action is attached to a build phase, because it introduces unexpected side-effects of the build, and sometimes even loss of reproducibility.
As #Andreas_D notes, there is a better alternative for JBoss deployment purpose; similarly for deploying to other appservers.
According to http://maven.apache.org/plugins/maven-dependency-plugin/examples/copying-artifacts.html you can copy the just built artifact to a specific directory:
<project>
[...]
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-dependency-plugin</artifactId>
<version>2.8</version>
<executions>
<execution>
<id>copy-installed</id>
<phase>install</phase>
<goals>
<goal>copy</goal>
</goals>
<configuration>
<artifactItems>
<artifactItem>
<groupId>${project.groupId}</groupId>
<artifactId>${project.artifactId}</artifactId>
<version>${project.version}</version>
<type>${project.packaging}</type>
</artifactItem>
</artifactItems>
<outputDirectory>some-other-place</outputDirectory>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
[...]
</project>
If you want to copy file to a webserver (local or distant) you can use Maven upload plugin :
<plugin>
<groupId>com.atlassian.maven.plugins</groupId>
<artifactId>maven-upload-plugin</artifactId>
<version>1.1</version>
<configuration>
<resourceSrc>
${project.build.directory}/${project.build.finalName}.${project.packaging}
</resourceSrc>
<resourceDest>${jboss.deployDir}</resourceDest>
<serverId>${jboss.host}</serverId>
<url>${jboss.deployUrl}</url>
</configuration>
</plugin>
And to configure parameters in a smart way, I use maven profiles :
<profiles>
<!-- local deployment -->
<profile>
<id>developpement</id>
<properties>
<jboss.host>localhost</jboss.host>
<jboss.deployDir>appli/jboss-4.0.4.GA/server/default/deploy/</jboss.deployDir>
<jboss.deployUrl>file://C:/</jboss.deployUrl>
</properties>
</profile>
<!-- distant deployment -->
<profile>
<id>validation</id>
<properties>
<jboss.host>ENV_val</jboss.host>
<jboss.deployDir>/home/envval/jboss/server/default/deploy/</jboss.deployDir>
<jboss.deployUrl>scp://PROJECT_LAN_HOST</jboss.deployUrl>
</properties>
</profile>
</profiles>
I've created an "ant launcher", to use it by clicking under Eclipse ant view :
<target name="copy war to JBoss local" description="Copy war to local JBoss">
<maven goal="upload:upload" options="-Pdeveloppement" />
</target>
But you can simply run it on a command line :
mvn upload:upload -Pdeveloppement
By the way, for distant deployment, you may need a login password for scp to work. You have to add them to you Maven settings.xml file :
<settings>
...
<servers>
<server>
<id>ENV_val</id>
<username>login</username>
<password>password</password>
</server>
</servers>
...
</settings>
The best approach would be to use a plugin which will actually deploy your application, such as cargo or jboss-maven plugin (credit to #Andreas_D for that one).
This would be a better approach to using a copy or generic upload tool since deploying is what you are actually trying to do.
With the cargo plugin you have the option to deploy to a variety of running servers. We took this approach to test locally in jetty using the jetty plugin during the build and had a profile to deploy to tomcat on demand via cargo.
Note: If you have your target server (JBOSS) installed locally on the dev box as well then you can also use cargo to start/stop your server during your build process as well. The downside of this approach is that you will need it to reference it's location in the pom file, so either all devs install it in the same location or a system property that defines where it is located (similar to JAVA_HOME).
We are using the maven release plugin on hudson and trying to automate the release process.
The release:prepare works fine. When we try to do the release:perform , it fails because it tries to upload a source artifact twice to the repository.
Things that I tried,
removing the profile which does include the maven source plugin from the super pom ( did not work)
specifying the goals on hudson for release as -P!attach-source release:prepare release:perform. Which I thought will exclude the source plugin from getting executed. (did not work).
tried specifying the plugin phase to some non existent phase in the super pom.(Did not work)
tried specifying the plugin configuration, forReleaseProfile as false. ( guess what?? Did not work too)
It still spits out this error.
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Checking for pre-existing User-Agent configuration.
[INFO] [DEBUG] Adding User-Agent configuration.
[INFO] [DEBUG] not adding permissions to wagon connection
[INFO] Uploading: http://xx.xx.xx.xx:8081/nexus/content/repositories/releases//com/yyy/xxx/hhh/hhh-hhh/1.9.40/hhh-hhh-1.9.40-sources.jar
[INFO] 57K uploaded (xxx-xxx-1.9.40-sources.jar)
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Checking for pre-existing User-Agent configuration.
[INFO] [DEBUG] Adding User-Agent configuration.
[INFO] [DEBUG] not adding permissions to wagon connection
[INFO] Uploading: http://xx.xxx.xx.xx:8081/nexus/content/repositories/releases//com/xxx/xxxx/xxx/xxx-xxx/1.9.40/xxx-xxx-1.9.40-sources.jar
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [INFO] ------------------------------------------------------------------------
[INFO] [ERROR] BUILD ERROR
[INFO] [INFO] ------------------------------------------------------------------------
[INFO] [INFO] Error deploying artifact: Authorization failed: Access denied to: http://xx.xxx.xx.xx:8081/nexus/content/repositories/releases/com/xxx/xxx/xxx/xxx-config/1.9.40/xxx-xxx-1.9.40-sources.jar
Any help regarding this will be really appreciated.
Try running mvn -Prelease-profile help:effective-pom.
You will find that you have two execution sections for maven-source-plugin
The output will look something like this:
<plugin>
<artifactId>maven-source-plugin</artifactId>
<version>2.0.4</version>
<executions>
<execution>
<id>attach-sources</id>
<goals>
<goal>jar</goal>
</goals>
</execution>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
To fix this problem, find everywhere you have used maven-source-plugin and make sure that you use the "id" attach-sources so that it is the same as the release profile. Then these sections will be merged.
Best practice says that to get consistency you need to configure this in the root POM of your project in build > pluginManagement and NOT in your child poms. In the child pom you just specify in build > plugins that you want to use maven-source-plugin but you provide no executions.
In the root pom.xml:
<build>
<pluginManagement>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
<executions>
<execution>
<!-- This id must match the -Prelease-profile id value or else sources will be "uploaded" twice, which causes Nexus to fail -->
<id>attach-sources</id>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</pluginManagement>
</build>
In the child pom.xml:
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
</plugin>
</plugins>
</build>
I know this question is old but it was google hit #1 today so I'll add my answer appropriate for recent versions of maven 3.
The symptom is that sources and javadoc jars are deployed twice when doing a release build with some versions of maven 3. If you're using maven to deploy your artifacts to a Sonatype Nexus repository that only allows a release artifact to be uploaded once (which is totally reasonable behavior), the build fails when the second upload attempt is rejected. Argh!
Maven versions 3.2.3 thru 3.3.9 have bugs - see https://issues.apache.org/jira/browse/MNG-5868 and https://issues.apache.org/jira/browse/MNG-5939. Those versions generate and deploy sources and javadoc jars twice when doing a release.
If I read the Maven issue tracker correctly, those bugs are not scheduled for fix as of this writing (the burned 3.4.0 release probably affected these).
Instead of a complex tweak to my pom, my simple workaround was to fall back to Maven version 3.2.1.
Just having hit the same problem, I analyzed it a bit. mvn release:perform evaluates the release.properties file, then checks out the tag in a temporary directory and invokes there something like
/usr/bin/mvn -D maven.repo.local=... -s /tmp/release-settings5747060794.xml
-D performRelease=true -P set-envs,maven,set-envs deploy
I tried to reproduce this – manually checked out the tag produced by release:prepare and invoked this:
mvn -D performRelease=true -P set-envs,maven,set-envs deploy
I got the same result: It was trying to upload the -sources.jar twice.
As noted by qualidafial in a comment, setting performRelease=false instead omits one of the two attachments of the same file.
I don't really have an idea how the deploy plugin (or any other plugin) uses this property.
We can provide this parameter as a configuration to the maven-relase-plugin:
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
<version>2.3.2</version>
<configuration>
<useReleaseProfile>false</useReleaseProfile>
</configuration>
</plugin>
</plugins>
</build>
I now added the <useReleaseProfile>false</useReleaseProfile> line to all the POMs, and it looks like releasing now works without an error message.
I have been struggeling with this issue for a while and have finally been able to resolve it in our infrastructure. The answers here didn't help me, as we didn't have multiple executions of the source plugin goals and the configuration seemed fine to us.
What we did miss out was to bind the execution of the source plugin to a phase. Extending the example by Bae, including the line <phase>install</phase> to the execution resolved the issue for us:
<plugin>
<artifactId>maven-source-plugin</artifactId>
<version>2.0.4</version>
<executions>
<execution>
<id>attach-sources</id>
<phase>install</phase>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
I suspect the solution lies in this answer here; different plugins seem to be invoking the jar goal / the attach-sources execution. By binding our execution to a certain phase, we force our plugin only to be run in this phase.
This was happening to me when running
mvn install deploy
I avoided the problem by instead running
mvn deploy
(which implies install). In my case only one artifact was being attempted to be uploaded twice, and that was a secondary artifact (maven-jar-plugin was setup to build a secondary jar in addition to the one built by the default-jar execution).
TL;DR
Disable execution with id attach-sources fixes this problem, if you cannot modify your parent poms.
--
This answer is a supplementary for #Bae's answer:
https://stackoverflow.com/a/10794985/3395456
My problem is the same, when running mvn -Prelease-profile help:effective-pom, I have two execution sections for maven-source-plugin
<plugin>
<artifactId>maven-source-plugin</artifactId>
<version>2.0.4</version>
<executions>
<execution>
<id>attach-sources</id>
<goals>
<goal>jar</goal>
</goals>
</execution>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
The top voted answer just recommends a best practice to remove unnamed (anonymous) execution to avoid duplicated binding. But what if I cannot remove it, because I cannot change the parent pom?
There is one way to disable one execution, not the anonymous one, but the one with id attach-source. And it also works for uploading xx-javadoc.jar twice.
So under my pom.xml, I can explictly override the plugins settings, by disabling the execution with id attach-source.
<!-- Fix uploading xx-source.jar and xx-javadoc.jar twice to Nexus -->
<!-- try to disable attach-sources, attach-javadocs execution (bind its phase to none) -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
<executions>
<execution>
<id>attach-sources</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-javadoc-plugin</artifactId>
<executions>
<execution>
<id>attach-javadocs</id>
<phase>none</phase>
</execution>
</executions>
<inherited>true</inherited>
</plugin>
References:
Is it possible to override executions in maven pluginManagement?
I don't think the probem is in the release plugin, I think you've got the xxx-sources.jar attached two times - that's why the duplicate upload. Why is there a duplicate attachment is hard to tell without seeing the POM. Try running mvn -X and checking the log for who attaches xxx-source.jar another time.
In any case, a good workaround on Nexus would be having a staging repository where you can upload releases several times - and when everything's ready you just close/promote the staging repo. Check the Sonatype OSS setup for an example.
I had the same problem. Basically, the error message is issued when an artifacts is sent to Nexus twice. This may be twice to the same Nexus repository or even across different repositories within the same Nexus.
However, the reasons for such a misconfiguration may vary. In my case, the artifacts were uploaded correctly during a mvn clean deploy build step in Jenkins, but then failed when a second deploy had been attempted. This second deploy had been configured in a Jenkins post build step "Publish artifacts in Maven repository".
Maven plugins in parent and child poms should not have execution. As per standard convention, define all plugin with execution/goals in parent pom in plugin management section. Child pom should not redefine above details, but mention only the plugin (with artifactId, and version) that needs to be executed.
I had similar issue with maven-assembly-plugin with parent pom as below:
<build>
<pluginManagement>
<plugins>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<version>2.6</version>
<configuration>
<descriptors>
<descriptor>src/assembly/assembly.xml</descriptor>
</descriptors>
</configuration>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</pluginManagement>
</build>
And Child pom had maven-assembly-plugin as below:
<build>
<plugins>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<version>2.2-beta-5</version>
<configuration>
<finalName>xyz</finalName>
<descriptors>
<descriptor>src/assembly/assembly.xml</descriptor>
</descriptors>
</configuration>
<executions>
<execution>
<id>xyz-distribution</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
Removing the <executions> from child pom rectified the issue.
The effective pom had 2 executions performed causing the duplicate install to Nexus repo.
FWIW this issue was breaking our build for a while and the answer was none-of-the-above.
Instead I had foolishly set the seemingly innocuous appendAssemblyId to false in a maven-assembly-plugin for an artifact that gets attached (read deployed, released) with our main artifact. E.g.:
<execution>
<id>ci-groovy-distrib</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
<configuration>
<descriptorRefs>
<descriptorRef>my-extra-assembly</descriptorRef>
</descriptorRefs>
<!-- This is the BUG: the assemblyID MUST be appended
because it is the classifier that distinguishes
this attached artifact from the main one!
-->
<appendAssemblyId>false</appendAssemblyId>
<!-- NOTE: Changes the name of the zip in the build target directory
but NOT the artifact that gets installed, deployed, releaseed -->
<finalName>my-extra-assembly-${project.version}</finalName>
</configuration>
</execution>
In summary:
the assembly plugin uses the assemblyId as the classifier for the artifact, hence an essential part of it's unique GAV coordinates in maven terms (actually it's more like GAVC coordinates - C is the classifier).
the name of the file installed, deployed, or released is actually built from these coordinates. It is not the same as the filename you see in your target directory. That's why your local build looks good, but your release will fail.
The stupid element only determines the local build artifact name and plays no part in the rest of it. It's a complete red-herring.
Summary of the summary:
The 400 error from Nexus was because our extra attached artifact was being uploaded over top of the main artifact, since it had the same name as the main artifact, because it had the same GAVC coordinates as the main artifact, because I removed the only distinguishing coordinate: the classifier derived automatically from the assemblyId.
The investigation to find this was a long and tortuous path the answer was right there all along in the docs for maven-assembly:
appendAssemblyId
boolean
Set to false to exclude the assembly id
from the assembly final name, and to create the resultant assembly
artifacts without classifier. As such, an assembly artifact having the
same format as the packaging of the current Maven project will replace
the file for this main project artifact.
Default value is: true.
User property is: assembly.appendAssemblyId.
From http://maven.apache.org/plugins/maven-assembly-plugin/single-mojo.html#attach
The extra bold is mine. The docs should have a big flashing warning here: "Set this to false and abandon all hope"
I got some help from this answer about a different problem maven-assembly-plugin: How to use appendAssemblyId
The explanation there from tunaki really helped.
I faced similar issue. Artifacts were getting deployed twice and the resultant build was failing.
Checked and found that the issue was in Jenkins Script. The settings.xml was called twice. Like:
sh "mvn -s settings.xml clean deploy -s settings.xml deploy -U .....
which caused the issue.
Updated this line and it worked like a charm:
sh "mvn clean deploy -s settings.xml -U .....
with nexus thix configuratio nworked for me
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
<configuration>
<useReleaseProfile>false</useReleaseProfile>
</configuration>
</plugin>
I configured the maven release plug-in with releaseProfile=false and dont execute the source artifacts profile. Which did the trick.
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
<version>2.1</version>
<configuration>
<arguments>-P!source-artifacts</arguments>
<useReleaseProfile>false</useReleaseProfile>
<goals>-Dmaven.test.skip=true deploy</goals>
</configuration>
</plugin>
</plugins>
</build>