Say that we are writing a Java Swing application and we use Eclipse or MyEclipse to develop it. In web applications, you make code changes, you save and your ant deployment file takes care of the deployment of the changed files. Then you just refresh or hard refresh the web page and the changes appear there. Can we do the same thing for a Swing applications so that we don't have to close and open the program from the beginning every time we make a change?
I don't think so because you need hot code replacement ! Maybee using another framework.
You can't simply do that because once JVM is started, it loads the class files once and will not reload it untill next loading request. But you can use ClassLoader to load modified class files dynamically.
The following two articles may help:
IBM article on "hot class swap"
"Who Said Runtime Class Reloading Is Hard in Java?"
The first one is in Chinese, but you can look at the code and the result. I think the second article is more helpful for a GUI application.
In MyEclipse you can start your application in debug mode instead of run mode and changes you make will be pushed to the target VM; if changes you make cannot be replaced you'll see a dialog informing you the replace failed and you will need to restart your application. You don't need to place any breakpoints in the application, just starting in debug mode is sufficient.
As Guillaume states above, changes to the class structure will typically not be hot-synched, but changes within existing methods should be fine.
Obviously, how successfully hot-synched changes affect your running application would depend on your application design.
Related
I am dealing with a peculiar issue.
After spying on a Java GUI that I have made (this might be important or it might not!), I am able to highlight correctly the components of the window.
But when I close the window and then open it again, it fails twice to highlight any component and then it highlights them correctly from that point on.
In order to spy on the elements I have used the Java Mode (I assume that this based on the Java Access Bridge).
Also, when I try to Open Application Navigator, but that also failed, although I have pasted the related files from the java access bridge.
It is really weird and there seems to be no easy answer for my problem.
This is not something specific to Java, and is observed for many applications. Check whether the application needs to load some data from a backend server to function properly. The UI elements of the application might get loaded quickly, however some their attributes might still be loading from a backend server, and until it is full loaded the attributes would not match with the values you captured.
I would like to implement a java application (server application) that can download a new version (.jar file) from a given url, and then update itself at runtime.
What is the best way to do this and is it possible?
I guess that the application can download a new .jar file and start it. But how should I do the handover, e.g. know when the new application is started and then exit. Or is there a better way to do this?
The basic structure of a solution is as follows:
There is a main loop responsible for repeatedly loading the latest version of the app (if required) and launching it.
The application does its thing, but periodically checks the download URL. If it detects a new version it exits back to the launcher.
There are a number of ways you could implement this. For example:
The launcher could be a wrapper script or binary application that starts a new JVM to run the application from a JAR file that gets replaced.
The launcher could be a Java application that creates a classloader for the new JAR, loads an entrypoint class and calls some method on it. If you do it this way, you have to watch for classloader storage leaks, but that's not difficult. (You just need to make sure that no objects with classes loaded from the JAR are reachable after you relaunch.)
The advantages of the external wrapper approach are:
you only need one JAR,
you can replace the entire Java app,
any secondary threads created by the app, etc will go away without special shutdown logic, and
you can also deal with recovery from application crashes, etc.
The second approach requires two JARs, but has the following advantages:
the solution is pure Java and portable,
the changeover will be quicker, and
you can more easily retain state across the restart (modulo leakage issues).
The "best" way depends on your specific requirements.
It should also be noted that:
There are security risks with auto-updating. In general, if the server that provides the updates is compromised, or if the mechanisms for providing the updates are susceptible to attack, then auto-updating can lead to a compromise of the client(s).
Pushing a update to a client that cause damage to the client could have legal risks, and risks to your business' reputation.
If you can find a way to avoid reinventing the wheel, that would be good. See the other answers for suggestions.
I am currently developing a JAVA Linux Daemon and also had the need to implement an auto-update mechanism. I wanted to limit my application to one jar file, and came up with a simple solution:
Pack the updater application in the update itself.
Application: When the application detects a newer version it does the following:
Download update (Zipfile)
Extract Application and ApplicationUpdater (all in the zipfile)
Run updater
ApplicationUpdater: When the updater runs it does the following:
Stop the Application (in my case a daemon via init.d)
Copy the downloaded jar file to overwrite current Application
Start the Application
Cleanup.
Hope it helps someone.
I've recently created update4j which is fully compatible with Java 9's module system.
It will seamlessly start the new version without a restart.
This is a known problem and I recommend against reinventing a wheel - don't write your own hack, just use what other people have already done.
Two situations you need to consider:
App needs to be self-updatable and keep running even during update (server app, embedded apps). Go with OSGi: Bundles or Equinox p2.
App is a desktop app and has an installer. There are many installers with update option. Check installers list.
I've written a Java application that can load plugins at runtime and start using them immediately, inspired by a similar mechanism in jEdit. jEdit is open source so you have the option of looking to see how it works.
The solution uses a custom ClassLoader to load files from the jar. Once they're loaded you can invoke some method from the new jar that will act as its main method. Then the tricky part is making sure you get rid of all references to the old code so that it can be garbage collected. I'm not quite an expert on that part, I've made it work but it wasn't easy.
First way: use tomcat and it's deploy facilities.
Second way: to split application on two parts (functional and update) and let update part replace function part.
Third way: In your server appliction just download new version, then old version releases bound port, then old version runs new version (starts process), then old version sends a request on application port to the new version to delete old version, old version terminates and new version deletes old version. Like this:
This isn't necessarily the best way, but it might work for you.
You can write a bootstrap application (ala the World of Warcraft launcher, if you've played WoW). That bootstrap is responsible for checking for updates.
If an update is available, it will offer it to the user, handle the download, installation, etc.
If the application is up to date, it will allow the user to launch the application
Optionally, you can allow the user to launch the application, even if it isn't up to date
This way you don't have to worry about forcing an exit of your application.
If your application is web based, and if it is important that they have an up to date client, then you can also do version checks while the application runs. You can do them at intervals, while performing normal communication with the server (some or all calls), or both.
For a product I recently worked on, we did version checks upon launch (without a boot strapper app, but before the main window appeared), and during calls to the server. When the client was out of date, we relied on the user to quit manually, but forbid any action against the server.
Please note that I don't know if Java can invoke UI code before you bring up your main window. We were using C#/WPF.
If you build your application using Equinox plugins, you can use the P2 Provisioning System to get a ready-made solution to this problem. This will require the server to restart itself after an update.
I see a security problem when downloading a new jar (etc.), e.g., a man in the middle attack. You always have to sign your downloadable update.
On JAX2015, Adam Bien told about using JGit for updating the binaries.
Sadly I could not find any tutorials.
Source in German.
Adam Bien created the updater see here
I forked it here with some javaFX frontend. I am also working on an automatic signing.
I'm using Google AppEngine with their built in web server. My development goes about in a simple way: I make changes to my .java sources or .jsp and compile using ant and to see the changes I have to restart the development server.
I'm wondering if there's a way I can avoid this last step of restarting my development server - somehow refresh the cached classes context of my web-server. The options provided by Google on this dev server are quite limited and am wondering if there's a better way.
I would like to avoid using something like JRebel which I could buy, but for this simple project I'm just wondering if I can remove the burden of restarting my web-server... otherwise I'll live with it.
I realized that you can just touch
appengine-web.xml to force server context reload. Also loading the
page under /_ah/reloadwebapp will reload the servers context - even if
it gives you a 404, it will still reload the context.
In debug mode, the JVM can perform some hot swapping - I know and Intellij IDEA does it, i m sure other debuggers in other IDE's does it too.
Start the app server with the debug flag (-Xdebug -Xrunjdwp:transport=dt_socket,address=127.0.0.1:8000 for example), then connect the debugger to the app server.
Then, make a change to the source that is not a method signature or class field change. Recompile, and voila, the debugger hot swapped the class into the jvm being debugged!
This only really works semi-well. But it may just be enough.
I am currently working on desktop software based on java.It's quite a big code base (more than 40 jar files).
I wish to provide an automatic update functionality. The desktop software constantly checks one back end system to see if there are new versions of the jar files available.
The problem now is: How to replace the updated jar files?
If you deploy your application using Java Webstart (JNLP), you get this mechanism almost for free...
From http://mindprod.com/jgloss/javawebstart.html
The key benefit for Java Web Start is automatic update without having to download the entire program every time.
Easiest would be to check for updates on each startup, download the updates and then launch your application. I think this is the way that Java Web Start works (see aioobes answer).
More complex would be to use either the netbeans or eclipse framework for your application. Both are rather complex and you will have to rewrite your application to work with them. This solution supports live updates.
As far as I am aware there is no easy way to update a running application. It is possible to load new versions of a class with a different classloader, but not possible to unload old versions while they are still referenced.
You can make a little server and a launcher which downloads the newest version, replaces the old one, and starts the jar with:
Runtime.getRuntime().exec("java yourjar -jar");
And you terminate the launcher with:
System.exit(1)
You can also serialize down your state (keep it in memory) and then create a new ClassLoader instance pointing to the new .jar files. Then serialize up your state again using this new classloader. You have just changed the underlaying .jars within a executing product.
Please note that you do not need to change the classloader for everything only for the part that is actually using the .jar files. This can be tricky to conclude what parts that are. And you might get nasty linking errors if done wrongly. So..
.. to keep it simple, use WebStart or a preloader that updates the .jars and then starts the main app (basically what WebStart does for you).
A reason for rolling your own, is that you can use your own format for the .jars, encryption, other packing formats etc.
After reading some answers to many auto-update questions, I thought of a solution. This is how I would implement a secure auto-update for a Java/Kotlin jar application.
Assumption: the installer will contain two jars: a launcher and the main application. Any shortcuts created will point to the launcher, but still be the name of the application. The release will contain the main application and the installer.
The launcher is launched first:
First check if an update has already been downloaded as app_name_update.jar
if an update has been downloaded, rename app_name_update.jar to app_name.jar
Start app_name.jar
This part does not have to be in the launcher, but it's preferred as to not slow down the main application: at this point, the launcher should check for an update (e.g. GitHub releases API) and download it to {CWD}/unverified_app_name_update.jar.
Compare the hash of unverified_app_name_update.jar to an online location containing hashes for all published versions. hashes.txt would be an example found in the same github repository. If the software is open-source, GPG signed commits is a must and the launcher should check if the latest update is a verified commit! If its a proprietary application, keep the hashes.txt at a separate URL from the release where your company does not control the infrastructure (e.g. GitHub).
Main app launched:
No need to check for updates unless updates are mandatory, in which case check for update -> if update found, start loading animation "updating" while you can detect that the launcher is still running. Ensure that the launcher has no race condition while loops!
I found ready project to solve automatically updating.
You can update your app, in your cases you can update jars and resources of your desktop app. The idea of the this is next: wrap you app with starter which can control updating and running you app. In details you can find here.
I need to quit firefox and restart it in order for the applet to be refreshed...
its anoying since i'm still programming it an the class files changes... am i missing some codes which makes it unable to refresh the applet and still take the one from the cache???
So I have a .jar applet in my website, a simulation game that spawns army whenever user clicks on the screen... however whenever I refresh the page, the previous army are still there on the screen..
I want it to be refreshed (as if we're just starting to run the application the first time).
Any Suggestions?
I'd really appreciate it
Thank you....
Each time you build a new Jar applet add a build number to it, eg applet.jar?build=123 or build123/applet.jar. This is good practice for deployment too as it removes all cache concerns and this can probably be simply automated by your build solution eg Ant.
In addition it is worth considering using the separate_jvm tag, detailed here. Available since 1.6 update 10. It will ensure a new JVM each refresh which prevents you worrying about plug-in idiosyncrasies eg out of memory exceptions due to a lot of refreshes.