We Keep Coding

Why 2 Path for load Library JNA

Hello This is my code :
if (isWindows()) {
//System.setProperty("jna.library.path", getClass().getResource("/resources/win32-x86").getPath());//netbeans WinOs
System.setProperty("jna.library.path", System.getProperty("user.dir").toString()+File.separator+"Desktop");//compiler WinOs
} else if (isMac()) {
//System.setProperty("jna.library.path", getClass().getResource("/resources").getPath());//netbeans MacOs
System.setProperty("jna.library.path", System.getProperty("user.dir").toString()+File.separator+"Desktop");//compiler MacOs
} else {
System.out.println("Your OS is not support!!");
}
Why I have 2 PATH (don't understand because for add an image i have only one Path) by OS, one for use with IDE and another for use with .JAR ?
I just realized, that when I'm use windows and I run the project (from netbeans) the "Library" load and I get the information, but when I compile and I launch my .jar I get error :
Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: %1 is not a valid Win32 application.
My Structure
It is correct?
On mac only work with this command : java -jar "/System/Volumes/Data/Users/hugoclo/NetBeansProjects/Prezauto/dist/Prezauto.jar"since Terminal. If click on jar i have message error : Not Found .....
Sorry about my English,

There can be two reasons for the "why". While Java is cross-platform, JNA (which relies on some native code) must necessarily behave differently on different operating systems. Particularly in the case of loading DLLs (Windows) or dynamic libraries (OSX), you don't want to mix and match. Because it might be possible to have a dll with the same name compiled for different operating systems, JNA's Getting Started page identifies standard locations for these libraries:
Make your target library available to your Java program. There are several ways to do this:
The preferred method is to set the jna.library.path system property to the path to your target library. This property is similar to java.library.path, but only applies to libraries loaded by JNA.
Change the appropriate library access environment variable before launching the VM. This is PATH on Windows, LD_LIBRARY_PATH on Linux, and DYLD_LIBRARY_PATH on OSX.
Make your native library available on your classpath, under the path {OS}-{ARCH}/{LIBRARY}, where {OS}-{ARCH} is JNA's canonical prefix for native libraries (e.g. win32-x86, linux-amd64, or darwin). If the resource is within a jar file it will be automatically extracted when loaded.
In your code, you appear to be trying to do the first option (setting the jna.library.path) to include the user's desktop. That's fine for testing, not good for production, and likely the reason your compiled jar can't find it. Furthermore, by setting this variable, you are overwriting any previous (default) location for it. If you want to go this route, you should copy the saved location and then append your own additional path to it.
However, for code you'll distribute to users, you don't want to have to rely on an absolute file path. It's far better to put the library in a standard relative path location: a resources path (src/main/resources if using Maven) that will be available on your (or any user's) classpath when executing. This seems to align with the commented-out Windows branch of your code, which will look in the win32-x86 subdirectory of your resources folder.
You may have told your IDE to add something to the classpath (so it works there) but if it's not in a standard location, it may fail in a jar.
I'm not sure why the macOS branch of your code does not put the resources in the darwin subdirectory but it probably should.

tomcat on ubuntu jnetpcap native library *.so unable to load [duplicate]

How can I load a custom dll file in my web application? I've tried the following:
Copied all required dlls in system32 folder and tried to load one of them in Servlet constructor System.loadLibrary
Copied required dlls into tomcat_home/shared/lib and tomcat_home/common/lib
All these dlls are in WEB-INF/lib of the web-application

In order for System.loadLibrary() to work, the library (on Windows, a DLL) must be in a directory somewhere on your PATH or on a path listed in the java.library.path system property (so you can launch Java like java -Djava.library.path=/path/to/dir).
Additionally, for loadLibrary(), you specify the base name of the library, without the .dll at the end. So, for /path/to/something.dll, you would just use System.loadLibrary("something").
You also need to look at the exact UnsatisfiedLinkError that you are getting. If it says something like:
Exception in thread "main" java.lang.UnsatisfiedLinkError: no foo in java.library.path
then it can't find the foo library (foo.dll) in your PATH or java.library.path. If it says something like:
Exception in thread "main" java.lang.UnsatisfiedLinkError: com.example.program.ClassName.foo()V
then something is wrong with the library itself in the sense that Java is not able to map a native Java function in your application to its actual native counterpart.
To start with, I would put some logging around your System.loadLibrary() call to see if that executes properly. If it throws an exception or is not in a code path that is actually executed, then you will always get the latter type of UnsatisfiedLinkError explained above.
As a sidenote, most people put their loadLibrary() calls into a static initializer block in the class with the native methods, to ensure that it is always executed exactly once:
class Foo {
static {
System.loadLibrary('foo');
}
public Foo() {
}
}

Changing 'java.library.path' variable at runtime is not enough because it is read only once by JVM. You have to reset it like:
System.setProperty("java.library.path", path);
//set sys_paths to null
final Field sysPathsField = ClassLoader.class.getDeclaredField("sys_paths");
sysPathsField.setAccessible(true);
sysPathsField.set(null, null);
Please, take a loot at: Changing Java Library Path at Runtime.

The original answer by Adam Batkin will lead you to a solution, but if you redeploy your webapp (without restarting your web container), you should run into the following error:
java.lang.UnsatisfiedLinkError: Native Library "foo" already loaded in another classloader
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1715)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1646)
at java.lang.Runtime.load0(Runtime.java:787)
at java.lang.System.load(System.java:1022)
This happens because the ClassLoader that originally loaded your DLL still references this DLL. However, your webapp is now running with a new ClassLoader, and because the same JVM is running and a JVM won't allow 2 references to the same DLL, you can't reload it. Thus, your webapp can't access the existing DLL and can't load a new one. So.... you're stuck.
Tomcat's ClassLoader documentation outlines why your reloaded webapp runs in a new isolated ClassLoader and how you can work around this limitation (at a very high level).
The solution is to extend Adam Batkin's solution a little:
package awesome;
public class Foo {
static {
System.loadLibrary('foo');
}
// required to work with JDK 6 and JDK 7
public static void main(String[] args) {
}
}
Then placing a jar containing JUST this compiled class into the TOMCAT_HOME/lib folder.
Now, within your webapp, you just have to force Tomcat to reference this class, which can be done as simply as this:
Class.forName("awesome.Foo");
Now your DLL should be loaded in the common classloader, and can be referenced from your webapp even after being redeployed.
Make sense?
A working reference copy can be found on google code, static-dll-bootstrapper .

You can use System.load() to provide an absolute path which is what you want, rather than a file in the standard library folder for the respective OS.
If you want native applications that already exist, use System.loadLibrary(String filename). If you want to provide your own you're probably better with load().
You should also be able to use loadLibrary with the java.library.path set correctly. See ClassLoader.java for implementation source showing both paths being checked (OpenJDK)

In the case where the problem is that System.loadLibrary cannot find the DLL in question, one common misconception (reinforced by Java's error message) is that the system property java.library.path is the answer. If you set the system property java.library.path to the directory where your DLL is located, then System.loadLibrary will indeed find your DLL. However, if your DLL in turn depends on other DLLs, as is often the case, then java.library.path cannot help, because the loading of the dependent DLLs is managed entirely by the operating system, which knows nothing of java.library.path. Thus, it is almost always better to bypass java.library.path and simply add your DLL's directory to LD_LIBRARY_PATH (Linux), DYLD_LIBRARY_PATH (MacOS), or Path (Windows) prior to starting the JVM.
(Note: I am using the term "DLL" in the generic sense of DLL or shared library.)

If you need to load a file that's relative to some directory where you already are (like in the current directory), here's an easy solution:
File f;
if (System.getProperty("sun.arch.data.model").equals("32")) {
// 32-bit JVM
f = new File("mylibfile32.so");
} else {
// 64-bit JVM
f = new File("mylibfile64.so");
}
System.load(f.getAbsolutePath());

For those who are looking for java.lang.UnsatisfiedLinkError: no pdf_java in java.library.path
I was facing same exception; I tried everything and important things to make it work are:
Correct version of pdf lib.jar ( In my case it was wrong version jar kept in server runtime )
Make a folder and keep the pdflib jar in it and add the folder in your PATH variable
It worked with tomcat 6.

If you believe that you added a path of native lib to %PATH%, try testing with:
System.out.println(System.getProperty("java.library.path"))
It should show you actually if your dll is on %PATH%
Restart the IDE Idea, which appeared to work for me after I setup the env variable by adding it to the %PATH%

The issue for me was naming:
The library name should begin with "lib..." such as libnative.dll.
So you might think you need to load "libnative": System.loadLibrary("libnative")
But you actually need to load "native": System.loadLibrary("native")

Poor me ! spent a whole day behind this.Writing it down here if any body replicates this issue.
I was trying to load as Adam suggested but then got caught with AMD64 vs IA 32 exception.If in any case after working as per Adam's(no doubt the best pick) walkthrough,try to have a 64 bit version of latest jre.Make sure your JRE AND JDK are 64 bit and you have correctly added it to your classpath.
My working example goes here:unstatisfied link error

I'm using Mac OS X Yosemite and Netbeans 8.02, I got the same error and the simple solution I have found is like above, this is useful when you need to include native library in the project. So do the next for Netbeans:
1.- Right click on the Project
2.- Properties
3.- Click on RUN
4.- VM Options: java -Djava.library.path="your_path"
5.- for example in my case: java -Djava.library.path=</Users/Lexynux/NetBeansProjects/NAO/libs>
6.- Ok
I hope it could be useful for someone.
The link where I found the solution is here:
java.library.path – What is it and how to use

It is simple just write java -XshowSettings:properties on your command line in windows and then paste all the files in the path shown by the java.library.path.

I had the same problem and the error was due to a rename of the dll.
It could happen that the library name is also written somewhere inside the dll.
When I put back its original name I was able to load using System.loadLibrary

First, you'll want to ensure the directory to your native library is on the java.library.path. See how to do that here. Then, you can call System.loadLibrary(nativeLibraryNameWithoutExtension) - making sure to not include the file extension in the name of your library.

How to use a JNI lib, with associated libs, at an arbitrary location?

We have an app that sometimes is installed with an associated app. Both may be installed separately, at different times, and neither is usually in the OS Path environment setting.
IF both apps are installed, the one I'm working on needs to use a JNI library from the other app. This library uses a dozen or so other native libs. While I can FIND the JNI lib, I can't seem to find a way to use it without requiring the user to change their system setup.
I've found the (hacky) technique to add the JNI lib to the java.library.path, I've been unable to find any way of updating the native Path so the JNI lib can find it's associated libs.
The only things that have worked so far are to:
Add the folder that the JNI and associated files are in to the OS path before launching our app.
Launch our app so the Current Working Directory is the JNI lib folder.
Neither of which makes for a hassle-free user experience.
So, is there any way for a Java app to modify it's own environment Path so the JNI lib can find it's associated native libs? (currently testing on Win7, will also need to support OS/X)

This can not be done with an unknown location at run time. According to jni documentation
"To load your shared native library module in Java, simply use Java's System.loadLibrary method in a Java class:"
as well as
"Another common reason for the native library not loading is because it is not in your path. On Windows make sure the path environment variable contains the path to the native library. On Unix make sure that your LD_LIBRARY_PATH contains the path to the native library. Adding paths to LD_LIBRARY_PATH can slow down other programs on your system so you may want to consider alternative approaches. For example you could recompile your native library with extra path information using -rpath if you're using GNU, see the GNU linker documentation (ld man page). You could use a command such as ldconfig (Linux) or crle (Solaris) to add additional search paths to the default system configuration (this requires root access and you will need to read the man pages)."
So thus you need to know the location and must be in a path to be able to load the file. If the location is not known it can not be done due to how jni works and the jvm works.

One way to load a JNI lib with dependent libraries is to load each of the dependents then load the JNI library.
For example, if bar.so is dependent on foo.so and both libraries exist in /some/dir, do the following:
System.load("/some/dir/foo.so");
System.load("/some/dir/bar.so");
Use System.load() instead of System.loadLibrary() so you can specify the absolute path to the library.
You'll have to load all dependents of all loaded libraries unless they can be found in the java.library.path path.
Hope this helps.

Where to put DLL file?

I am calling C++ method using DLL file in my Java project. Right now, I have hard coded the path.
The application will be deployed on many machines and it also run on multiple machine. Where should I put my DLL file so that I can load it and call it on any machine?

I've seen applications that put the DLL into the JAR file. At run-time, they extract the DLL from the JAR into a temporary directory and then access it there.
It's not the most efficient approach but the easiest from a deployment perspective.

You have to make sure your DLL is in the classpath.
One such way to do so is to put the path to the DLL in PATH environment variable.
Other option is to add it to the VM arguments in the variable LD_LIBRARY_PATH, like this:
java -Djava.library.path=/path/to/my/dll -cp /my/classpath/goes/here MainClass
If you are developing a complex application, that has to be stable you have to ensure that the DLL you need is put somewhere, where the OS is going to look for it, probably think of an installer script/program.

C:\WINDOWS\system32 (assuming C is the drive where windows is installed, probably you can get it from registry)
I used to use windows long time ago & not an expert, so I made a google search for you and find the link http://vlaurie.com/computers2/Articles/dll.htm
See the last topic in the link (the one starting with headline Using Regsvr32.exe to Register DLLs)

How to add native library to "java.library.path" with Eclipse launch (instead of overriding it)

I got a native library that needs to be added to java.library.path. With JVM argument -Djava.library.path=path... I can set the path as I want.
My problem is that my other library (pentaho reporting) searches fonts based on the default java.library.path (including system directories etc) and the manual setting overrides the default path..
So : how can I add a path entry to the default java.library.path instead of overriding it (which seems to be done with -Djava.library.path)? (I wouldn't want to add the default path by hand, which wouldn't be nice for the sake of deployment)
EDIT: Sorry for missing details; I'm working with Eclipse. (The deployment is done with JNLP and there I can use nativelib under resources)

Had forgotten this issue... I was actually asking with Eclipse, sorry for not stating that originally.
And the answer seems to be too simple (at least with 3.5; probably with older versions also):
Java run configuration's Arguments : VM arguments:
-Djava.library.path="${workspace_loc:project}\lib;${env_var:PATH}"
Must not forget the quotation marks, otherwise there are problems with spaces in PATH.

If you want to add a native library without interfering with java.library.path at development time in Eclipse (to avoid including absolute paths and having to add parameters to your launch configuration), you can supply the path to the native libraries location for each Jar in the Java Build Path dialog under Native library location. Note that the native library file name has to correspond to the Jar file name. See also this detailed description.

SWT puts the necessary native DLLs into a JAR. Search for "org.eclipse.swt.win32.win32.x86_3.4.1.v3449c.jar" for an example.
The DLLs must be in the root of the JAR, the JAR must be signed and the DLL must appear with checksum in the META-INF/MANIFEST.MF for the VM to pick them up.

In Windows, like this:
-Djava.library.path="C:/MyLibPath;%PATH%"
%PATH% is your old -Djava.library.path

Can you get round this by calling System.load() programmatically to load your native library? This method (unlike System.loadLibrary()) allows you to specify an absolute path.

In UNIX systems, you can append to the LD_LIBRARY_PATH environment variable. On Windows, the JVM automatically sets the system property, java.library.path, to PATH; so if the dll is on your PATH, then you're set.

https://bugs.eclipse.org/bugs/show_bug.cgi?id=102239 states that there is no substitution mechanics implemented in Eclipse's launcher, at least no up to release Juno.
Thus it is (almost) impossible to append or prepend another library folder to java.library.path when launching Eclipse without prior knowledge of the default setting.
I wrote almost, cause it should be possible to let Eclipse startup, dump the content of java.library.path and stop Eclipse in one command. The dump would the be parsed and then taken as the input for launching Eclipse, i.e.
#!/bin/bash
# get default value of java.library.path (somehow)
default_lib_path=$( start_dump_stop_eclipse_somehow )
# now launch Eclipse
eclipse --launcher.appendVmargs \
-vmargs \
-Djava.library.path="/my/native/lib/folder:${default_lib_path}"

On Windows: Add the path to the library to the PATH environment variable.
On Linux: Add the path to the library to the LD_LIBRARY_PATH environment variable.
On Mac: Add the path to the library to the DYLD_LIBRARY_PATH environment variable.
java.library.path is initilized with the values of the variables above on its corresponding platform.
This should work on any IDE.
You can test if the value is what you expect by calling java -XshowSettings:properties

The solution offered by Rob Elsner in one of the comments above works perfectly (OSX 10.9, Eclipse Kepler). One has to append their additional paths to that separated by ":".
You could also use ${system_property:java.library.path} – Rob Elsner Nov 22 '10 at 23:01

Window->Preferences->Java->Installed JREs.
Choose your current
JRE(JDK) and click Edit.
Fill Default VM Arguments:
-Djava.library.path=/usr/local/xuggler/lib.

The native library file name has to correspond to the Jar file name. This is very very important.
Please make sure that jar name and dll name are same.
Also,please see the post from Fabian Steeg
My download for jawin was containing different names for dll and jar.
It was jawin.jar and jawind.dll, note extra 'd' in dll file name.
I simply renamed it to jawin.dll and set it as a native library in eclipse as mentioned in post
"http://www.eclipsezone.com/eclipse/forums/t49342.html"

For some reason I couldn't get multiple folders to work (well it did for a while but as soon as I needed more dlls and added more folders, none with white spaces in the path). I then copied all needed dlls to one folder and had that as my java.library.path and it worked. I don't have an explanation - if anyone does, it would be great.

Many of the existing answers assume you want to set this for a particular project, but I needed to set it for Eclipse itself in order to support integrated authentication for the SQL Server JDBC driver.
To do this, I followed these instructions for launching Eclipse from the Java commandline instead of its normal launcher. Then I just modified that script to add my -Djava.library.path argument to the Java commandline.

On Windows, I have found that the important thing is to start Eclipse from the command line rather than from the Start Menu or a shortcut, provided that the native DLL is in a directory in your PATH. Apparently, this ensures that the proper directory is on the path.