We Keep Coding

Spring injecting an initiallized mock via constructor

I have a singleton class (so private constructor) which needs to use a Spring Data repository during initialization. I have one injected as a constructor argument. Roughly:
#Controller
public class MyClass {
#Autowired
private MyClass(MyRepository repo) {
repo.findAll();
}
}
I want to unit test my class, so I need to have a mock repository initialized with mock values and then passed into my class before my class is initialized. How do I write my Mockito mocks in my JUnit test to make this possible?

You don't need Spring; this is an advantage of constructor injection. Just use MyRepository mockRepo = mock(MyRepository.class) and new MyClass(mockRepo).
(Your constructor should be public, by the way. You seem to be making the common mistake of confusing different senses of "singleton"; in the case of DI it simply means that the container only makes a single instance and shares it. Finally, if you only have one constructor you don't need #Autowired.)

Unit test should be independent. It means, we are not using real data from database even call any service from our test file.
Assuming you are using JUni5 and have findAllStudents() in your controller. So your test file approximately like this
#TestInstance(TestInstance.Lifecycle.PER_CLASS)
public class MyClassTest {
#Mock
private MyRepository repo;
#InjectMocks
private MyClass controller;
#BeforeAll
public void setup() {
MockitoAnnotations.initMocks(this);
}
#Test
public void testDataIsExist() {
List<String> expectednames = new ArrayList();
expectedNames.add("Foo");
expectedNames.add("Bar");
Mockito.when(myRepo.findAll()).thenReturn(expectedNames);
List<String> result = controller.findAllStudents();
Assertions.assertNotNull(result);
Assertions.assertEquals(expectednames, result);
}
}
So we are mock all the services we use in controller, then inject to controller itself. Then inside the test method we mock repo.findAll() to return expectedNames so if the controller find that function it will return what mock says to return.
After we call the function, we have to make it sure that the result is according to what we expected.

There is little value in a "unit test" for a #Controller implementation. If you use #WebMvcTest, then you can use #MockBean:
#WebMvcTest
class MyControllerTest {
#Autowired
private MockMvc mockMvc;
#MockBean
private MyRepository repository;
#Test
void testSomething() {
mockMvc.perform( ... );
}
}

How to mock only one method of one injected dependency and inject the rest normally?

I'm writing tests for a project with a heavy use of dependency injection.
So normally I would just inject the object that I'm testing:
public class RegistrationTest
extends WithApplication {
private RegistrationController controller;
#Before
public void setUp() throws Exception {
Injector injector = app.injector();
controller = injector.instanceOf(RegistrationController.class);
}
#Test
public void openRegistrationView() {
Result result = controller.registrationForm();
assertEquals(OK, result.status());
}
}
Now I need to mock a return value of a method of one of the dependencies of the class under test.
To do this I can use #InjectMocks and #RunWith(MockitoJUnitRunner.class) to inject mocked dependencies.
#RunWith(MockitoJUnitRunner.class)
public class RegistrationTest
extends WithApplication {
#InjectMocks
private RegistrationController controller;
#Mock
private FormFactory formFactory;
#Mock
private RegistrationIpCache registrationIpCache;
#Test
public void openRegistrationView() {
doReturn("test").when(registrationIpCache).getLast();
Result result = controller.registrationForm();
assertEquals(OK, result.status());
}
}
But while I only want to mock one method call of RegistrationIpCache I need to mock the whole class and also I need to mock all other dependencies of RegistrationController like FormFactory in my example. Now every method of all mocked classes doesn't work as expected.
Sure I can use doCallRealMethod() to mock every method of all dependencies
doCallRealMethod().when(formFactory).form(Registration.class);
But as you already can imagine the work and the amount of boilerplate code needed for this to work is extreme.
Isn't it possible to inject my class normally and then only spy one dependency or mock one method of one dependency?

You need to use #Spy instead of a #Mock.
#InjectMocks
private RegistrationController controller;
#Mock
private FormFactory formFactory;
#Spy
private RegistrationIpCache registrationIpCache;
But be aware that in this case #Spy will try to use default constructor.
If the default constructor is not available use explicit constructor call:
#Spy
private RegistrationIpCache registrationIpCache = new RegistrationIpCache(dependencies);
Here is the cases when Mockito isn't able to instantiate your class from #Spy javadoc:
Mockito will try to find zero argument constructor (even private) and
create an instance for you. But Mockito cannot instantiate inner
classes, local classes, abstract classes and interfaces.
Here is the example of manually injecting dependencies:
#RunWith(MockitoJUnitRunner.class)
public class RegistrationTest {
private RegistrationController controller;
private RegistrationIpCache spyRegistrationIpCache; //this is the dependencies that you need to spy
#Before
public void setUp() throws Exception {
spyRegistrationIpCache = spy(realInstanceOfregistrationIpCache);
controller = new RegistrationController(registrationIpCache, realInstanceOfFormFactory);
}
}
In this case there is much more code that you have to write, but this give you much more control over the object instantiation and dependency injection.
Note that using constructor instantiation is not required. Since you do it manually you can instantiate it however you want.

Injected Mock behavior not used in constructor

Using Mockito annotations (MockitoJUnitRunner.class, #InjectMocks and #Mock):
#RunWith(MockitoJUnitRunner.class)
public class TagRepositoryTest {
#InjectMocks
private TagRepository repository;
#Mock
private SetupDetails setupDetails;
....
}
I have the test target class using the injected dependency in the constructor:
public class TagRepository {
private final Collection<Tag> tags;
#Autowired
public TagRepository(SetupDetails setupDetails) {
this.tags = Arrays.asList(
new Tag("name", setupDetails.getSourceId()),
...
);
...
}
And I am currently stubbing the method call in #Setup or inside #Test with when():
when(setupDetails.getSourceId()).thenReturn("1");
This is not working as expected. Mockito seems to only stub the method call after the #InjectMocks TagRepository constructor is called, resulting in a null beeing returned instead of "1".
Is there a way to get the stub ready before the constructor is called (using Mockito annotations)?

The only way I am being able to work around this is trying to control the order Mockito setups this scenario giving up on Mockito annotations:
public void setUp() {
setupDetails = mock(SetupDetails.class);
when(setupDetails.getDbId()).thenReturn("1");
repository = new TagRepository(setupDetails);
}

Indeed this is the case and your "work around" is the way to go.
Some will argue that this is a good practice as your test will not compile when you introduce more members to your class under test, as you'll also add them to the constructor.

Injecting a String property with #InjectMocks

I have a Spring MVC #Controller with this constructor:
#Autowired
public AbcController(XyzService xyzService, #Value("${my.property}") String myProperty) {/*...*/}
I want to write a standalone unit test for this Controller:
#RunWith(MockitoJUnitRunner.class)
public class AbcControllerTest {
#Mock
private XyzService mockXyzService;
private String myProperty = "my property value";
#InjectMocks
private AbcController controllerUnderTest;
/* tests */
}
Is there any way to get #InjectMocks to inject my String property? I know I can't mock a String since it's immutable, but can I just inject a normal String here?
#InjectMocks injects a null by default in this case. #Mock understandably throws an exception if I put it on myProperty. Is there another annotation I've missed that just means "inject this exact object rather than a Mock of it"?

You can't do this with Mockito, but Apache Commons actually has a way to do this using one of its built in utilities. You can put this in a function in JUnit that is run after Mockito injects the rest of the mocks but before your test cases run, like this:
#InjectMocks
MyClass myClass;
#Before
public void before() throws Exception {
FieldUtils.writeField(myClass, "fieldName", fieldValue, true);
}

Since you're using Spring, you can use the org.springframework.test.util.ReflectionTestUtils from the spring-test module. It neatly wraps setting a field on a object or a static field on a class (along with other utility methods).
#RunWith(MockitoJUnitRunner.class)
public class AbcControllerTest {
#Mock
private XyzService mockXyzService;
#InjectMocks
private AbcController controllerUnderTest;
#Before
public void setUp() {
ReflectionTestUtils.setField(controllerUnderTest, "myProperty",
"String you want to inject");
}
/* tests */
}

You cannot do this with Mockito, because, as you mentioned yourself, a String is final and cannot be mocked.
There is a #Spy annotation which works on real objects, but it has the same limitations as #Mock, thus you cannot spy on a String.
There is no annotation to tell Mockito to just inject that value without doing any mocking or spying. It would be a good feature, though. Perhaps suggest it at the Mockito Github repository.
You will have to manually instantiate your controller if you don't want to change your code.
The only way to have a pure annotation based test is to refactor the controller. It can use a custom object that just contains that one property, or perhaps a configuration class with multiple properties.
#Component
public class MyProperty {
#Value("${my.property}")
private String myProperty;
...
}
This can be injected into the controller.
#Autowired
public AbcController(XyzService xyzService, MyProperty myProperty) {
...
}
You can mock and inject this then.
#RunWith(MockitoJUnitRunner.class)
public class AbcControllerTest {
#Mock
private XyzService mockXyzService;
#Mock
private MyProperty myProperty;
#InjectMocks
private AbcController controllerUnderTest;
#Before
public void setUp(){
when(myProperty.get()).thenReturn("my property value");
}
/* tests */
}
This is not pretty straight forward, but at least you will be able to have a pure annotation based test with a little bit of stubbing.

Just don't use #InjectMocks in that case.
do:
#Before
public void setup() {
controllerUnderTest = new AbcController(mockXyzService, "my property value");
}

Solution is simple: You should put constructor injection for the object type while for primitive/final dependencies you can simply use setter injection and that'll be fine for this scenario.
So this:
public AbcController(XyzService xyzService, #Value("${my.property}") String myProperty) {/*...*/}
Would be changed to:
#Autowired
public AbcController(XyzService xyzService) {/*...*/}
#Autowired
public setMyProperty(#Value("${my.property}") String myProperty){/*...*/}
And the #Mock injections in test would be as simple as:
#Mock
private XyzService xyzService;
#InjectMocks
private AbcController abcController;
#BeforeMethod
public void setup(){
MockitoAnnotations.initMocks(this);
abcController.setMyProperty("new property");
}
And that'll be enough. Going for Reflections is not advisable!
PLEASE AVOID THE USAGE OF REFLECTIONS IN PRODUCTION CODE AS MUCH AS POSSIBLE!!
For the solution of Jan Groot I must remind you that it will become very nasty since you will have to remove all the #Mock and even #InjectMocks and would have to initialize and then inject them manually which for 2 dependencies sound easy but for 7 dependencies the code becomes a nightmare (see below).
private XyzService xyzService;
private AbcController abcController;
#BeforeMethod
public void setup(){ // NIGHTMARE WHEN MORE DEPENDENCIES ARE MOCKED!
xyzService = Mockito.mock(XyzService.class);
abcController = new AbcController(xyzService, "new property");
}

What you can use is this :
org.mockito.internal.util.reflection.Whitebox
Refactor your "AbcController" class constructor
In your Test class "before" method, use Whitebox.setInternalState method to specify whatever string you want
#Before
public void setUp(){
Whitebox.setInternalState(controllerUnderTest, "myProperty", "The string that you want"); }

If you want to have no change in your code then use ReflectionTestUtils.setField method
How do I mock an autowired #Value field in Spring with Mockito?

Injecting #Autowired private field during testing

I have a component setup that is essentially a launcher for an application. It is configured like so:
#Component
public class MyLauncher {
#Autowired
MyService myService;
//other methods
}
MyService is annotated with the #Service Spring annotation and is autowired into my launcher class without any issues.
I would like to write some jUnit test cases for MyLauncher, to do so I started a class like this:
public class MyLauncherTest
private MyLauncher myLauncher = new MyLauncher();
#Test
public void someTest() {
}
}
Can I create a Mock object for MyService and inject it into myLauncher in my test class? I currently don't have a getter or setter in myLauncher as Spring is handling the autowiring. If possible, I'd like to not have to add getters and setters. Can I tell the test case to inject a mock object into the autowired variable using an #Before init method?
If I'm going about this completely wrong, feel free to say that. I'm still new to this. My main goal is to just have some Java code or annotation that puts a mock object in that #Autowired variable without me having to write a setter method or having to use an applicationContext-test.xml file. I would much rather maintain everything for the test cases in the .java file instead of having to maintain a separate application content just for my tests.
I am hoping to use Mockito for the mock objects. In the past I have done this by using org.mockito.Mockito and creating my objects with Mockito.mock(MyClass.class).

You can absolutely inject mocks on MyLauncher in your test. I am sure if you show what mocking framework you are using someone would be quick to provide an answer. With mockito I would look into using #RunWith(MockitoJUnitRunner.class) and using annotations for myLauncher. It would look something like what is below.
#RunWith(MockitoJUnitRunner.class)
public class MyLauncherTest
#InjectMocks
private MyLauncher myLauncher = new MyLauncher();
#Mock
private MyService myService;
#Test
public void someTest() {
}
}

The accepted answer (use MockitoJUnitRunner and #InjectMocks) is great. But if you want something a little more lightweight (no special JUnit runner), and less "magical" (more transparent) especially for occasional use, you could just set the private fields directly using introspection.
If you use Spring, you already have a utility class for this : org.springframework.test.util.ReflectionTestUtils
The use is quite straightforward :
ReflectionTestUtils.setField(myLauncher, "myService", myService);
The first argument is your target bean, the second is the name of the (usually private) field, and the last is the value to inject.
If you don't use Spring, it is quite trivial to implement such a utility method. Here is the code I used before I found this Spring class :
public static void setPrivateField(Object target, String fieldName, Object value){
try{
Field privateField = target.getClass().getDeclaredField(fieldName);
privateField.setAccessible(true);
privateField.set(target, value);
}catch(Exception e){
throw new RuntimeException(e);
}
}

Sometimes you can refactor your #Component to use constructor or setter based injection to setup your testcase (you can and still rely on #Autowired). Now, you can create your test entirely without a mocking framework by implementing test stubs instead (e.g. Martin Fowler's MailServiceStub):
#Component
public class MyLauncher {
private MyService myService;
#Autowired
MyLauncher(MyService myService) {
this.myService = myService;
}
// other methods
}
public class MyServiceStub implements MyService {
// ...
}
public class MyLauncherTest
private MyLauncher myLauncher;
private MyServiceStub myServiceStub;
#Before
public void setUp() {
myServiceStub = new MyServiceStub();
myLauncher = new MyLauncher(myServiceStub);
}
#Test
public void someTest() {
}
}
This technique especially useful if the test and the class under test is located in the same package because then you can use the default, package-private access modifier to prevent other classes from accessing it. Note that you can still have your production code in src/main/java but your tests in src/main/test directories.
If you like Mockito then you will appreciate the MockitoJUnitRunner. It allows you to do "magic" things like #Manuel showed you:
#RunWith(MockitoJUnitRunner.class)
public class MyLauncherTest
#InjectMocks
private MyLauncher myLauncher; // no need to call the constructor
#Mock
private MyService myService;
#Test
public void someTest() {
}
}
Alternatively, you can use the default JUnit runner and call the MockitoAnnotations.initMocks() in a setUp() method to let Mockito initialize the annotated values. You can find more information in the javadoc of #InjectMocks and in a blog post that I have written.

I believe in order to have auto-wiring work on your MyLauncher class (for myService), you will need to let Spring initialize it instead of calling the constructor, by auto-wiring myLauncher. Once that is being auto-wired (and myService is also getting auto-wired), Spring (1.4.0 and up) provides a #MockBean annotation you can put in your test. This will replace a matching single beans in context with a mock of that type. You can then further define what mocking you want, in a #Before method.
public class MyLauncherTest
#MockBean
private MyService myService;
#Autowired
private MyLauncher myLauncher;
#Before
private void setupMockBean() {
doNothing().when(myService).someVoidMethod();
doReturn("Some Value").when(myService).someStringMethod();
}
#Test
public void someTest() {
myLauncher.doSomething();
}
}
Your MyLauncher class can then remain unmodified, and your MyService bean will be a mock whose methods return values as you defined:
#Component
public class MyLauncher {
#Autowired
MyService myService;
public void doSomething() {
myService.someVoidMethod();
myService.someMethodThatCallsSomeStringMethod();
}
//other methods
}
A couple advantages of this over other methods mentioned is that:
You don't need to manually inject myService.
You don't need use the Mockito runner or rules.

I'm a new user for Spring. I found a different solution for this. Using reflection and making public necessary fields and assign mock objects.
This is my auth controller and it has some Autowired private properties.
#RestController
public class AuthController {
#Autowired
private UsersDAOInterface usersDao;
#Autowired
private TokensDAOInterface tokensDao;
#RequestMapping(path = "/auth/getToken", method = RequestMethod.POST)
public #ResponseBody Object getToken(#RequestParam String username,
#RequestParam String password) {
User user = usersDao.getLoginUser(username, password);
if (user == null)
return new ErrorResult("Kullanıcıadı veya şifre hatalı");
Token token = new Token();
token.setTokenId("aergaerg");
token.setUserId(1);
token.setInsertDatetime(new Date());
return token;
}
}
And this is my Junit test for AuthController. I'm making public needed private properties and assign mock objects to them and rock :)
public class AuthControllerTest {
#Test
public void getToken() {
try {
UsersDAO mockUsersDao = mock(UsersDAO.class);
TokensDAO mockTokensDao = mock(TokensDAO.class);
User dummyUser = new User();
dummyUser.setId(10);
dummyUser.setUsername("nixarsoft");
dummyUser.setTopId(0);
when(mockUsersDao.getLoginUser(Matchers.anyString(), Matchers.anyString())) //
.thenReturn(dummyUser);
AuthController ctrl = new AuthController();
Field usersDaoField = ctrl.getClass().getDeclaredField("usersDao");
usersDaoField.setAccessible(true);
usersDaoField.set(ctrl, mockUsersDao);
Field tokensDaoField = ctrl.getClass().getDeclaredField("tokensDao");
tokensDaoField.setAccessible(true);
tokensDaoField.set(ctrl, mockTokensDao);
Token t = (Token) ctrl.getToken("test", "aergaeg");
Assert.assertNotNull(t);
} catch (Exception ex) {
System.out.println(ex);
}
}
}
I don't know advantages and disadvantages for this way but this is working. This technic has a little bit more code but these codes can be seperated by different methods etc. There are more good answers for this question but I want to point to different solution. Sorry for my bad english. Have a good java to everybody :)

Look at this link
Then write your test case as
#RunWith(SpringJUnit4ClassRunner.class)
#ContextConfiguration({"/applicationContext.xml"})
public class MyLauncherTest{
#Resource
private MyLauncher myLauncher ;
#Test
public void someTest() {
//test code
}
}