I am getting the following error trying to read from a socket. I'm doing a readInt() on that InputStream, and I am getting this error. Perusing the documentation this suggests that the client part of the connection closed the connection. In this scenario, I am the server.
I have access to the client log files and it is not closing the connection, and in fact its log files suggest I am closing the connection. So does anybody have an idea why this is happening? What else to check for? Does this arise when there are local resources that are perhaps reaching thresholds?
I do note that I have the following line:
socket.setSoTimeout(10000);
just prior to the readInt(). There is a reason for this (long story), but just curious, are there circumstances under which this might lead to the indicated error? I have the server running in my IDE, and I happened to leave my IDE stuck on a breakpoint, and I then noticed the exact same errors begin appearing in my own logs in my IDE.
Anyway, just mentioning it, hopefully not a red herring. :-(
There are several possible causes.
The other end has deliberately reset the connection, in a way which I will not document here. It is rare, and generally incorrect, for application software to do this, but it is not unknown for commercial software.
More commonly, it is caused by writing to a connection that the other end has already closed normally. In other words an application protocol error.
It can also be caused by closing a socket when there is unread data in the socket receive buffer.
In Windows, 'software caused connection abort', which is not the same as 'connection reset', is caused by network problems sending from your end. There's a Microsoft knowledge base article about this.
Connection reset simply means that a TCP RST was received. This happens when your peer receives data that it can't process, and there can be various reasons for that.
The simplest is when you close the socket, and then write more data on the output stream. By closing the socket, you told your peer that you are done talking, and it can forget about your connection. When you send more data on that stream anyway, the peer rejects it with an RST to let you know it isn't listening.
In other cases, an intervening firewall or even the remote host itself might "forget" about your TCP connection. This could happen if you don't send any data for a long time (2 hours is a common time-out), or because the peer was rebooted and lost its information about active connections. Sending data on one of these defunct connections will cause a RST too.
Update in response to additional information:
Take a close look at your handling of the SocketTimeoutException. This exception is raised if the configured timeout is exceeded while blocked on a socket operation. The state of the socket itself is not changed when this exception is thrown, but if your exception handler closes the socket, and then tries to write to it, you'll be in a connection reset condition. setSoTimeout() is meant to give you a clean way to break out of a read() operation that might otherwise block forever, without doing dirty things like closing the socket from another thread.
Whenever I have had odd issues like this, I usually sit down with a tool like WireShark and look at the raw data being passed back and forth. You might be surprised where things are being disconnected, and you are only being notified when you try and read.
You should inspect full trace very carefully,
I've a server socket application and fixed a java.net.SocketException: Connection reset case.
In my case it happens while reading from a clientSocket Socket object which is closed its connection because of some reason. (Network lost,firewall or application crash or intended close)
Actually I was re-establishing connection when I got an error while reading from this Socket object.
Socket clientSocket = ServerSocket.accept();
is = new BufferedReader(new InputStreamReader(clientSocket.getInputStream()));
int readed = is.read(); // WHERE ERROR STARTS !!!
The interesting thing is for my JAVA Socket if a client connects to my ServerSocket and close its connection without sending anything is.read() is being called repeatedly.It seems because of being in an infinite while loop for reading from this socket you try to read from a closed connection.
If you use something like below for read operation;
while(true)
{
Receive();
}
Then you get a stackTrace something like below on and on
java.net.SocketException: Socket is closed
at java.net.ServerSocket.accept(ServerSocket.java:494)
What I did is just closing ServerSocket and renewing my connection and waiting for further incoming client connections
String Receive() throws Exception
{
try {
int readed = is.read();
....
}catch(Exception e)
{
tryReConnect();
logit(); //etc
}
//...
}
This reestablises my connection for unknown client socket losts
private void tryReConnect()
{
try
{
ServerSocket.close();
//empty my old lost connection and let it get by garbage col. immediately
clientSocket=null;
System.gc();
//Wait a new client Socket connection and address this to my local variable
clientSocket= ServerSocket.accept(); // Waiting for another Connection
System.out.println("Connection established...");
}catch (Exception e) {
String message="ReConnect not successful "+e.getMessage();
logit();//etc...
}
}
I couldn't find another way because as you see from below image you can't understand whether connection is lost or not without a try and catch ,because everything seems right . I got this snapshot while I was getting Connection reset continuously.
Embarrassing to say it, but when I had this problem, it was simply a mistake that I was closing the connection before I read all the data. In cases with small strings being returned, it worked, but that was probably due to the whole response was buffered, before I closed it.
In cases of longer amounts of text being returned, the exception was thrown, since more then a buffer was coming back.
You might check for this oversight. Remember opening a URL is like a file, be sure to close it (release the connection) once it has been fully read.
I had the same error. I found the solution for problem now. The problem was client program was finishing before server read the streams.
I had this problem with a SOA system written in Java. I was running both the client and the server on different physical machines and they worked fine for a long time, then those nasty connection resets appeared in the client log and there wasn't anything strange in the server log. Restarting both client and server didn't solve the problem. Finally we discovered that the heap on the server side was rather full so we increased the memory available to the JVM: problem solved! Note that there was no OutOfMemoryError in the log: memory was just scarce, not exhausted.
Check your server's Java version. Happened to me because my Weblogic 10.3.6 was on JDK 1.7.0_75 which was on TLSv1. The rest endpoint I was trying to consume was shutting down anything below TLSv1.2.
By default Weblogic was trying to negotiate the strongest shared protocol. See details here: Issues with setting https.protocols System Property for HTTPS connections.
I added verbose SSL logging to identify the supported TLS. This indicated TLSv1 was being used for the handshake.
-Djavax.net.debug=ssl:handshake:verbose:keymanager:trustmanager -Djava.security.debug=access:stack
I resolved this by pushing the feature out to our JDK8-compatible product, JDK8 defaults to TLSv1.2. For those restricted to JDK7, I also successfully tested a workaround for Java 7 by upgrading to TLSv1.2. I used this answer: How to enable TLS 1.2 in Java 7
I also had this problem with a Java program trying to send a command on a server via SSH. The problem was with the machine executing the Java code. It didn't have the permission to connect to the remote server. The write() method was doing alright, but the read() method was throwing a java.net.SocketException: Connection reset. I fixed this problem with adding the client SSH key to the remote server known keys.
In my case was DNS problem .
I put in host file the resolved IP and everything works fine.
Of course it is not a permanent solution put this give me time to fix the DNS problem.
In my experience, I often encounter the following situations;
If you work in a corporate company, contact the network and security team. Because in requests made to external services, it may be necessary to give permission for the relevant endpoint.
Another issue is that the SSL certificate may have expired on the server where your application is running.
I've seen this problem. In my case, there was an error caused by reusing the same ClientRequest object in an specific Java class. That project was using Jboss Resteasy.
Initially only one method was using/invoking the object ClientRequest (placed as global variable in the class) to do a request in an specific URL.
After that, another method was created to get data with another URL, reusing the same ClientRequest object, though.
The solution: in the same class was created another ClientRequest object and exclusively to not be reused.
In my case it was problem with TSL version. I was using Retrofit with OkHttp client and after update ALB on server side I should have to delete my config with connectionSpecs:
OkHttpClient.Builder clientBuilder = new OkHttpClient.Builder();
List<ConnectionSpec> connectionSpecs = new ArrayList<>();
connectionSpecs.add(ConnectionSpec.COMPATIBLE_TLS);
// clientBuilder.connectionSpecs(connectionSpecs);
So try to remove or add this config to use different TSL configurations.
I used to get the 'NotifyUtil::java.net.SocketException: Connection reset at java.net.SocketInputStream.read(SocketInputStream.java:...' message in the Apache Console of my Netbeans7.4 setup.
I tried many solutions to get away from it, what worked for me is enabling the TLS on Tomcat.
Here is how to:
Create a keystore file to store the server's private key and
self-signed certificate by executing the following command:
Windows:
"%JAVA_HOME%\bin\keytool" -genkey -alias tomcat -keyalg RSA
Unix:
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA
and specify a password value of "changeit".
As per https://tomcat.apache.org/tomcat-7.0-doc/ssl-howto.html
(This will create a .keystore file in your localuser dir)
Then edit server.xml (uncomment and edit relevant lines) file (%CATALINA_HOME%apache-tomcat-7.0.41.0_base\conf\server.xml) to enable SSL and TLS protocol:
<Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true"
maxThreads="150" scheme="https" secure="true"
clientAuth="false" sslProtocol="TLS" keystorePass="changeit" />
I hope this helps
This question already has answers here:
FtpClient storeFile always return False
(5 answers)
Closed 1 year ago.
I have a Java program that uploads new/changed files to my Web site via FTP. It currently uses the Apache Commons Net Library, version 3.8.0.
After moving to a new city, the program, which I’ve been using for almost 20 years, began failing. It still connects to the FTP server and signs in successfully. But when it tries to upload a file, it pauses for 20-30 seconds, then fails. It always fails on the first file, 100% of the time.
The failing call is to org.apache.commons.net.ftp.FTPClient.storeFile(). The documentation says storeFile() turns True if successfully completed, false if not. Curiously, the method is also documented to throw various forms of IOException. The documentation doesn’t say when or why the method decides to return a boolean versus throwing an exception.
My problem is that storeFile() is returning a false (indicating failure), and never throws an exception. So, I have no error message to tell me what caused the failure. File name & path look OK. The Web hosting company tried to determine why the failure was occurring, but was unsuccessful.
This problem has been going on for weeks now. Anyone have any ideas on how to debug this?
If the cause of your problem is moving to a new city, and you can still open the control connection, the most likely culprit is a change to your underlying ISP and network that is blocking the data transfer stream from opening.
FTP port 21 is used for opening connections and is normally allowed by all networks but then a new, random, unprivileged port is negotiated over the control connection and then used for the actual DATA transfers. I bet your "storeFile()" is trying to open a data connection and hitting a block which is probably causing a timeout. You may be interpretting this as "never throws an exception" but in reality it might throw a Timeout Exception after you sit around and wait long enough.
One thing I would recommend is find a way to have your FTP client use PASSIVE mode for the FTP data transfer. This is designed into the protocol to avoid these types of problems. You can read about it in detail on the wiki https://en.wikipedia.org/wiki/File_Transfer_Protocol under "Communications and Data Transfer"
I have a Java program runs (on linux) for a while and then causes the server to lock up with "Too many files open"
After restarting the machine, I run the java program again and then execute the lsof command against it's pid. A large number of lines with the following output are produced:
java 971 uknown 980u sock 0,9 0t0 20461 protocol: TCPv6
Does this means the program is opening multiple tcp connections & not closing them?
What further steps can i take to troubleshoot this?
It means your program is opening file descriptors but not closing them. It may be sockets or file handlers. So it is causing resource leak. Make sure all file handlers are closed and make it ready for garbage collected.
As dan1st pointed out in comment, one preventive measure to avoid this scenario is using try-with-resources. This will implements the AutoClosable interface and make sure automatic resource closing.
I developed a java code to connect to a device and issue few POST commands. This runs well in eclipse. But when I build and run on command-line it always times out.
I am running eclipse in the same machine as command line .I am using java 8.
Network problems are best tackled by first keeping Java out of it. So as a first step, you can open up the console and try to do a telnet connection to the socket address you used in your program by entering
telnet targetserver.example.com 12345
If that times out as well, the source of your problem is not within Java.
You haven't provided much (e.g. source as requested) but my guess into the blue is that you're sitting behind a proxy that is configured in Eclipse. Eclipse passes that information to the started application so the connection works. Starting the application on the console lacks this information, so the network connection is attempted directly without going via the proxy.
We have an issue on one of customers servers, where something seems to close the java application HTTP socket, and not let it open afterwards for some time.
Meaning it goes like this:
1) Application works fine, then something causing the socket to close.
2) Any subsequent attempts to open it, including application restart will produce the "java.net.BindException: Address already in use" for some time.
3) Then it would finally let open the socket via another application restart.
It's the first time we see such issue happening, and quite stumbled by it.
Does it rings a bell for anyone?
OS: 2.6.18-194.el5 #1 SMP Fri Apr 2 14:58:14 EDT 2010 x86_64, CentOS release 5.5
Java version: 1.6.0_20
Thanks!
Seems like you should tell your Linux to create socket with immediate rebinding allowed, see SO_REUSEADDR in man 7 socket.
Sounds like you should be investigating the 'something causing the socket to close' part.
As for what's closing the socket, you'll have to investigate your code. It's not something external that closes the socket, it can only be your code.
The behaviour you see when you attempt to bind to that socket again is normal and expected, and there's some explanations as for why here.
You can set the SO_REUSEADDR socket option to tell the system to go ahead and allow a program to bind to that port anyway. For java, see here
You can't do an instant rebind as sockets linger until all queued messages for the socket have been successfully sent or the linger timeout has been reached. You can change this policy with SO_LINGER.
More info can be found here (manpage) and here (javadoc)
As for the closing problem, this seems like a bug in your code.