Related
I have many threads, that I implement from the main.
My purpose is to limit requests to the server (some methods in the sever class),
So I put counter before critical sections and before synchronized.
I noticed, that the counter only grows up and never decreases...
Thats sample of my code:
private static int currentRequests;
/**
* #param newStock StockState we are adding to the exist stock states.
*/
public void addStock(StockState newStock) throws OutOfBoundConcurrentException
{
if(currentRequests>MaxConcurrentRequests)
throw new OutOfBoundConcurrentException();
System.out.println(currentRequests++);
synchronized (this) {
int indx=checkExistStock(newStock.getStockName());
if(indx<0)
{
stockStates.add(newStock);
currentRequests--;
return;
}
else
{
stockStates.get(indx).updateStockValueFromStockStateClass(newStock.getStockCurrentValue());
}
}
currentRequests--;
}
In case you have many instances of the class that has the method
void addStock(StockState newStock)
Your counter is broken in regard to thread safety and the behavior of the counter is not guaranteed.
Threads that use different instances of the class will not block each other.
To fix it you can synchronize the java class instance itself instead.
synchronized(OuterClass.class)
If you are using the lock only for the counter it is much preferred to use an instance of
AtomicLong
It is non-blocking and perform better in an order of magnitudes.
You can do it in 2 ways.
(1) Java AtomicInteger or AtomicLong:
Here you can use decrementAndGet() method in both classes to achieve your goal. Both are synchronization free (non-blocking) operations, achieved by using Compare And Swap algorithms.
(2) Java Semaphore:
You can easily use this one, which is specifically tailored for your kind of requirements requirement (controlling #no of threads). In this way, you don't need to reinvent things and also can enjoy the non-blocking nature (same as #1). You can use acquire() and release() methods to control the count.
I have the following class for a Router's table with synchronised methods:
public class RouterTable {
private String tableForRouter;
private Map<String,RouterTableEntry> table;
public RouterTable(String router){
tableForRouter = router;
table = new HashMap<String,RouterTableEntry>();
}
public String owner(){
return tableForRouter;
}
public synchronized void add(String network, String ipAddress, int distance){
table.put(network, new RouterTableEntry(ipAddress, distance));
}
public synchronized boolean exists(String network){
return table.containsKey(network);
}
}
Multiple threads will read and write to the HashMap. I was wondering if it would be best to remove the synchronized on the methods and just use Collections.synchronizedMap(new HashMap<String,RouterTableEntry())` what is the most sensible way in Java to do this?
I would suggest using a ConcurrentHashmap. This is a newer data structure introduced in later version of Java. It provides thread safety and allows concurrent operations, as opposed to a synchronized map, which will do one operation at a time.
If the map is the only place where thread safety is required, then just using the ConcurrentHashmap is fine. However, if you have atomic operations involving more state variables, I would suggest using synchronized code blocks instead of synchronized functions
In the absence of strict requirements about happens-before relationships and point in time correctness, the sensible thing to do in modern java is usually just use a ConcurrentMap.
Otherwise, yes, using a Collections#synchronizedMap is both safer and likely more performant (because you won't enclose any tertiary code that doesn't need synchronization) than manually synchronizing everything yourself.
The best is to use a java.util.concurrent.ConcurrentHashMap, which is designed from the ground up for concurrent access (read & write).
Using synchronization like you do works, but shows high contention and therefore not optimal performance. A collection obtained through Collections.synchronizedMap() would do just the same (it only wraps a standart collection with synchronized methods).
ConcurrentHashMap, on the contrary, used various techniques to be thread-safe and provide good concurrency ; for example, it has (by default) 16 regions, each guarded by a distinct lock, so that up to 16 threads can use it concurrently.
Synchronizing the map will prevent users of your class from doing meaningful synchronization.
They will have no way of knowing if the result from exists is still valid, once they get into there if statement, and will need to do external synchronization.
With the synchronized methods as you show, they could lock on your class until they are done with a block of method calls.
The other option is to do no synchronization and let the user handle that, which they need to do anyway to be safe.
Adding your own synchronization is what was wrong with HashTable.
The current common style tends to prefer Synchronized collections over explicit synchronized qualification on the methods that access them. However, this is not set in stone, and your decision should depend on the way you use this code/will use this code in the future.
Points to consider:
(a) If your map is going to be used by code that is outside of the RouterTable then you need to use a SynchronizedMap.
(b) OTOH, if you are going to add some additional fields to RouterTable, and their values need to be consistent with the values in the map (in other words: you want changes to the map and to the additional fields to happen in one atomic quantum), then you need to use synchrnoized method.
in trying to improve my understanding on concurrency issues, I am looking at the following scenario (Edit: I've changed the example from List to Runtime, which is closer to what I am trying):
public class Example {
private final Object lock = new Object();
private final Runtime runtime = Runtime.getRuntime();
public void add(Object o) {
synchronized (lock) { runtime.exec(program + " -add "+o); }
}
public Object[] getAll() {
synchronized (lock) { return runtime.exec(program + " -list "); }
}
public void remove(Object o) {
synchronized (lock) { runtime.exec(program + " -remove "+o); }
}
}
As it stands, each method is by thread safe when used standalone. Now, what I'm trying to figure out is how to handle where the calling class wishes to call:
for (Object o : example.getAll()) {
// problems if multiple threads perform this operation concurrently
example.remove(b);
}
But as noted, there is no guarantee that the state will be consistent between the call to getAll() and the calls to remove(). If multiple threads call this, I'll be in trouble. So my question is - How should I enable the developer to perform the operation in a thread safe manner? Ideally I wish to enforce the thread safety in a way that makes it difficult for the developer to avoid/miss, but at the same time not complicated to achieve. I can think of three options so far:
A: Make the lock 'this', so the synchronization object is accessible to calling code, which can then wrap the code blocks. Drawback: Hard to enforce at compile time:
synchronized (example) {
for (Object o : example.getAll()) {
example.remove(b);
}
}
B: Place the combined code into the Example class - and benefit from being able to optimize the implementation, as in this case. Drawback: Pain to add extensions, and potential mixing unrelated logic:
public class Example {
...
public void removeAll() {
synchronized (lock) { Runtime.exec(program + " -clear"); }
}
}
C: Provide a Closure class. Drawback: Excess code, potentially too generous of a synchronization block, could in fact make deadlocks easier:
public interface ExampleClosure {
public void execute(Example example);
}
public Class Example {
...
public void execute(ExampleClosure closure) {
synchronized (this) { closure.execute(this); }
}
}
example.execute(new ExampleClosure() {
public void execute(Example example) {
for (Object o : example.getAll()) {
example.remove(b);
}
}
}
);
Is there something I'm missing? How should synchronization be scoped to ensure the code is thread safe?
Use a ReentrantReadWriteLock which is exposed via the API. That way, if someone needs to synchronize several API calls, they can acquire a lock outside of the method calls.
In general, this is a classic multithreaded design issue. By synchronizing the data structure rather than synchronizing concepts that use the data structure, it's hard to avoid the fact that you essentially have a reference to the data structure without a lock.
I would recommend that locks not be done so close to the data structure. But it's a popular option.
A potential technique to make this style work is to use an editing tree-walker. Essentially, you expose a function that does a callback on each element.
// pointer to function:
// - takes Object by reference and can be safely altered
// - if returns true, Object will be removed from list
typedef bool (*callback_function)(Object *o);
public void editAll(callback_function func) {
synchronized (lock) {
for each element o { if (callback_function(o)) {remove o} } }
}
So then your loop becomes:
bool my_function(Object *o) {
...
if (some condition) return true;
}
...
editAll(my_function);
...
The company I work for (corensic) has test cases extracted from real bugs to verify that Jinx is finding the concurrency errors properly. This type of low level data structure locking without higher level synchronization is pretty common pattern. The tree editing callback seems to be a popular fix for this race condition.
I think everyone is missing his real problem. When iterating over the new array of Object's and trying to remove one at a time the problem is still technically unsafe (though ArrayList implantation would not explode, it just wouldnt have expected results).
Even with CopyOnWriteArrayList there is the possibility that there is an out of date read on the current list to when you are trying to remove.
The two suggestions you offered are fine (A and B). My general suggestion is B. Making a collection thread-safe is very difficult. A good way to do it is to give the client as little functionality as possible (within reason). So offering the removeAll method and removing the getAll method would suffice.
Now you can at the same time say, 'well I want to keep the API the way it is and let the client worry about additional thread-safety'. If thats the case, document thread-safety. Document the fact that a 'lookup and modify' action is both non atomic and non thread-safe.
Today's concurrent list implementations are all thread safe for the single functions that are offered (get, remove add are all thread safe). Compound functions are not though and the best that could be done is documenting how to make them thread safe.
I think j.u.c.CopyOnWriteArrayList is a good example of similar problem you're trying to solve.
JDK had a similar problem with Lists - there were various ways to synchronize on arbitrary methods, but no synchronization on multiple invocations (and that's understandable).
So CopyOnWriteArrayList actually implements the same interface but has a very special contract, and whoever calls it, is aware of it.
Similar with your solution - you should probably implement List (or whatever interface this is) and at the same time define special contracts for existing/new methods. For example, getAll's consistency is not guaranteed, and calls to .remove do not fail if o is null, or isn't inside the list, etc. If users want both combined and safe/consistent options - this class of yours would provide a special method that does exactly that (e.g. safeDeleteAll), leaving other methods close to original contract as possible.
So to answer your question - I would pick option B, but would also implement interface your original object is implementing.
From the Javadoc for List.toArray():
The returned array will be "safe" in
that no references to it are
maintained by this list. (In other
words, this method must allocate a new
array even if this list is backed by
an array). The caller is thus free to
modify the returned array.
Maybe I don't understand what you're trying to accomplish. Do you want the Object[] array to always be in-sync with the current state of the List? In order to achieve that, I think you would have to synchronize on the Example instance itself and hold the lock until your thread is done with its method call AND any Object[] array it is currently using. Otherwise, how will you ever know if the original List has been modified by another thread?
You have to use the appropriate granularity when you choose what to lock. What you're complaining about in your example is too low a level of granularity, where the lock doesn't cover all the methods that have to happen together. You need to make methods that combine all the actions that need to happen together within the same lock.
Locks are reentrant so the high-level method can call low-level synchronized methods without a problem.
In Java, the idiomatic way to declare critical sections in the code is the following:
private void doSomething() {
// thread-safe code
synchronized(this) {
// thread-unsafe code
}
// thread-safe code
}
Almost all blocks synchronize on this, but is there a particular reason for this? Are there other possibilities? Are there any best practices on what object to synchronize on? (such as private instances of Object?)
As earlier answerers have noted, it is best practice to synchronize on an object of limited scope (in other words, pick the most restrictive scope you can get away with, and use that.) In particular, synchronizing on this is a bad idea, unless you intend to allow the users of your class to gain the lock.
A particularly ugly case arises, though, if you choose to synchronize on a java.lang.String. Strings can be (and in practice almost always are) interned. That means that each string of equal content - in the ENTIRE JVM - turns out to be the same string behind the scenes. That means that if you synchronize on any String, another (completely disparate) code section that also locks on a String with the same content, will actually lock your code as well.
I was once troubleshooting a deadlock in a production system and (very painfully) tracked the deadlock to two completely disparate open source packages that each synchronized on an instance of String whose contents were both "LOCK".
First, note that the following code snippets are identical.
public void foo() {
synchronized (this) {
// do something thread-safe
}
}
and:
public synchronized void foo() {
// do something thread-safe
}
do exactly the same thing. No preference for either one of them except for code readability and style.
When you do synchronize methods or blocks of code, it's important to know why you are doing such a thing, and what object exactly you are locking, and for what purpose.
Also note that there are situations in which you will want to client-side synchronize blocks of code in which the monitor you are asking for (i.e. the synchronized object) is not necessarily this, like in this example :
Vector v = getSomeGlobalVector();
synchronized (v) {
// some thread-safe operation on the vector
}
I suggest you get more knowledge about concurrent programming, it will serve you a great deal once you know exactly what's happening behind the scenes. You should check out Concurrent Programming in Java, a great book on the subject. If you want a quick dive-in to the subject, check out Java Concurrency # Sun
I try to avoid synchronizing on this because that would allow everybody from the outside who had a reference to that object to block my synchronization. Instead, I create a local synchronization object:
public class Foo {
private final Object syncObject = new Object();
…
}
Now I can use that object for synchronization without fear of anybody “stealing” the lock.
Just to highlight that there are also ReadWriteLocks available in Java, found as java.util.concurrent.locks.ReadWriteLock.
In most of my usage, I seperate my locking as 'for reading' and 'for updates'. If you simply use a synchronized keyword, all reads to the same method/code block will be 'queued'. Only one thread can access the block at one time.
In most cases, you never have to worry about concurrency issues if you are simply doing reading. It is when you are doing writing that you worry about concurrent updates (resulting in lost of data), or reading during a write (partial updates), that you have to worry about.
Therefore a read/write lock makes more sense to me during multi-threaded programming.
You'll want to synchronize on an object that can serve as a Mutex. If the current instance (the this reference) is suitable (not a Singleton, for instance), you may use it, as in Java any Object may serve as the Mutex.
In other occasions, you may want to share a Mutex between several classes, if instances of these classes may all need access to the same resources.
It depends a lot on the environment you're working in and the type of system you're building. In most Java EE applications I've seen, there's actually no real need for synchronization...
Personally, I think the answers which insist that it is never or only rarely correct to sync on this are misguided. I think it depends on your API. If your class is a threadsafe implementation and you so document it, then you should use this. If the synchronization is not to make each instance of the class as a whole threadsafe in the invocation of it's public methods, then you should use a private internal object. Reusable library components often fall into the former category - you must think carefully before you disallow the user to wrap your API in external synchronization.
In the former case, using this allows multiple methods to be invoked in an atomic manner. One example is PrintWriter, where you may want to output multiple lines (say a stack trace to the console/logger) and guarantee they appear together - in this case the fact that it hides the sync object internally is a real pain. Another such example are the synchronized collection wrappers - there you must synchronize on the collection object itself in order to iterate; since iteration consists of multiple method invocations you cannot protect it totally internally.
In the latter case, I use a plain object:
private Object mutex=new Object();
However, having seen many JVM dumps and stack traces that say a lock is "an instance of java.lang.Object()" I have to say that using an inner class might often be more helpful, as others have suggested.
Anyway, that's my two bits worth.
Edit: One other thing, when synchronizing on this I prefer to sync the methods, and keep the methods very granular. I think it's clearer and more concise.
Synchronization in Java often involves synchronizing operations on the same instance. Synchronizing on this then is very idiomatic since this is a shared reference that is automatically available between different instance methods (or sections of) in a class.
Using another reference specifically for locking, by declaring and initializing a private field Object lock = new Object() for example, is something I never needed or used. I think it is only useful when you need external synchronization on two or more unsynchronized resources inside an object, although I would always try to refactor such a situation into a simpler form.
Anyway, implicit (synchronized method) or explicit synchronized(this) is used a lot, also in the Java libraries. It is a good idiom and, if applicable, should always be your first choice.
On what you synchronize depends on what other threads that might potentially get into conflict with this method call can synchronize.
If this is an object that is used by only one thread and we are accessing a mutable object which is shared between threads, a good candidate is to synchronize over that object - synchronizing on this has no point since another thread that modifies that shared object might not even know this, but does know that object.
On the other hand synchronizing over this makes sense if many threads call methods of this object at the same time, for instance if we are in a singleton.
Note that a syncronized method is often not the best option, since we hold a lock the whole time the method runs. If it contains timeconsuming but thread safe parts, and a not so time consuming thread-unsafe part, synchronizing over the method is very wrong.
Almost all blocks synchronize on this, but is there a particular reason for this? Are there other possibilities?
This declaration synchronizes entire method.
private synchronized void doSomething() {
This declaration synchronized a part of code block instead of entire method.
private void doSomething() {
// thread-safe code
synchronized(this) {
// thread-unsafe code
}
// thread-safe code
}
From oracle documentation page
making these methods synchronized has two effects:
First, it is not possible for two invocations of synchronized methods on the same object to interleave. When one thread is executing a synchronized method for an object, all other threads that invoke synchronized methods for the same object block (suspend execution) until the first thread is done with the object.
Are there other possibilities? Are there any best practices on what object to synchronize on? (such as private instances of Object?)
There are many possibilities and alternatives to synchronization. You can make your code thread safe by using high level concurrency APIs( available since JDK 1.5 release)
Lock objects
Executors
Concurrent collections
Atomic variables
ThreadLocalRandom
Refer to below SE questions for more details:
Synchronization vs Lock
Avoid synchronized(this) in Java?
the Best Practices is to create an object solely to provide the lock:
private final Object lock = new Object();
private void doSomething() {
// thread-safe code
synchronized(lock) {
// thread-unsafe code
}
// thread-safe code
}
By doing this you are safe, that no calling code can ever deadlock your method by an unintentional synchronized(yourObject) line.
(Credits to #jared and #yuval-adam who explained this in more details above.)
My guess is that the popularity of using this in tutorials came from early Sun javadoc: https://docs.oracle.com/javase/tutorial/essential/concurrency/locksync.html
Synchronization includes 3 parts: Atomicity, Visibility and Ordering
Synchronized block is very coarse level of synchronization. It enforces visibility and ordering just as what you expected. But for atomicity, it does not provide much protection. Atomicity requires global knowledge of the program rather than local knowledge. (And that makes multi-threading programming very hard)
Let's say we have a class Account having method deposit and withdraw. They are both synchronized based on a private lock like this:
class Account {
private Object lock = new Object();
void withdraw(int amount) {
synchronized(lock) {
// ...
}
}
void deposit(int amount) {
synchronized(lock) {
// ...
}
}
}
Considering we need to implement a higher-level class which handles transfer, like this:
class AccountManager {
void transfer(Account fromAcc, Account toAcc, int amount) {
if (fromAcc.getBalance() > amount) {
fromAcc.setBalance(fromAcc.getBalance() - amount);
toAcc.setBalance(toAcc.getBalance + amount);
}
}
}
Assuming we have 2 accounts now,
Account john;
Account marry;
If the Account.deposit() and Account.withdraw() are locked with internal lock only. That will cause problem when we have 2 threads working:
// Some thread
void threadA() {
john.withdraw(500);
}
// Another thread
void threadB() {
accountManager.transfer(john, marry, 100);
}
Because it is possible for both threadA and threadB run at the same time. And thread B finishes the conditional check, thread A withdraws, and thread B withdraws again. This means we can withdraw $100 from John even if his account has no enough money. This will break atomicity.
You may propose that: why not adding withdraw() and deposit() to AccountManager then? But under this proposal, we need to create a multi-thread safe Map which maps from different accounts to their locks. We need to delete the lock after execution (otherwise will leak memory). And we also need to ensure no other one accesses the Account.withdraw() directly. This will introduce a lots of subtle bugs.
The correct and most idiomatic way is to expose the lock in the Account. And let the AccountManager to use the lock. But in this case, why not just use the object itself then?
class Account {
synchronized void withdraw(int amount) {
// ...
}
synchronized void deposit(int amount) {
// ...
}
}
class AccountManager {
void transfer(Account fromAcc, Account toAcc, int amount) {
// Ensure locking order to prevent deadlock
Account firstLock = fromAcc.hashCode() < toAcc.hashCode() ? fromAcc : toAcc;
Account secondLock = fromAcc.hashCode() < toAcc.hashCode() ? toAcc : fromAcc;
synchronized(firstLock) {
synchronized(secondLock) {
if (fromAcc.getBalance() > amount) {
fromAcc.setBalance(fromAcc.getBalance() - amount);
toAcc.setBalance(toAcc.getBalance + amount);
}
}
}
}
}
To conclude in simple English, private lock does not work for slightly more complicated multi-threaded program.
Whenever a question pops up on SO about Java synchronization, some people are very eager to point out that synchronized(this) should be avoided. Instead, they claim, a lock on a private reference is to be preferred.
Some of the given reasons are:
some evil code may steal your lock (very popular this one, also has an "accidentally" variant)
all synchronized methods within the same class use the exact same lock, which reduces throughput
you are (unnecessarily) exposing too much information
Other people, including me, argue that synchronized(this) is an idiom that is used a lot (also in Java libraries), is safe and well understood. It should not be avoided because you have a bug and you don't have a clue of what is going on in your multithreaded program. In other words: if it is applicable, then use it.
I am interested in seeing some real-world examples (no foobar stuff) where avoiding a lock on this is preferable when synchronized(this) would also do the job.
Therefore: should you always avoid synchronized(this) and replace it with a lock on a private reference?
Some further info (updated as answers are given):
we are talking about instance synchronization
both implicit (synchronized methods) and explicit form of synchronized(this) are considered
if you quote Bloch or other authorities on the subject, don't leave out the parts you don't like (e.g. Effective Java, item on Thread Safety: Typically it is the lock on the instance itself, but there are exceptions.)
if you need granularity in your locking other than synchronized(this) provides, then synchronized(this) is not applicable so that's not the issue
I'll cover each point separately.
Some evil code may steal your lock (very popular this one, also has an
"accidentally" variant)
I'm more worried about accidentally. What it amounts to is that this use of this is part of your class' exposed interface, and should be documented. Sometimes the ability of other code to use your lock is desired. This is true of things like Collections.synchronizedMap (see the javadoc).
All synchronized methods within the same class use the exact same
lock, which reduces throughput
This is overly simplistic thinking; just getting rid of synchronized(this) won't solve the problem. Proper synchronization for throughput will take more thought.
You are (unnecessarily) exposing too much information
This is a variant of #1. Use of synchronized(this) is part of your interface. If you don't want/need this exposed, don't do it.
Well, firstly it should be pointed out that:
public void blah() {
synchronized (this) {
// do stuff
}
}
is semantically equivalent to:
public synchronized void blah() {
// do stuff
}
which is one reason not to use synchronized(this). You might argue that you can do stuff around the synchronized(this) block. The usual reason is to try and avoid having to do the synchronized check at all, which leads to all sorts of concurrency problems, specifically the double checked-locking problem, which just goes to show how difficult it can be to make a relatively simple check threadsafe.
A private lock is a defensive mechanism, which is never a bad idea.
Also, as you alluded to, private locks can control granularity. One set of operations on an object might be totally unrelated to another but synchronized(this) will mutually exclude access to all of them.
synchronized(this) just really doesn't give you anything.
While you are using synchronized(this) you are using the class instance as a lock itself. This means that while lock is acquired by thread 1, the thread 2 should wait.
Suppose the following code:
public void method1() {
// do something ...
synchronized(this) {
a ++;
}
// ................
}
public void method2() {
// do something ...
synchronized(this) {
b ++;
}
// ................
}
Method 1 modifying the variable a and method 2 modifying the variable b, the concurrent modification of the same variable by two threads should be avoided and it is. BUT while thread1 modifying a and thread2 modifying b it can be performed without any race condition.
Unfortunately, the above code will not allow this since we are using the same reference for a lock; This means that threads even if they are not in a race condition should wait and obviously the code sacrifices concurrency of the program.
The solution is to use 2 different locks for two different variables:
public class Test {
private Object lockA = new Object();
private Object lockB = new Object();
public void method1() {
// do something ...
synchronized(lockA) {
a ++;
}
// ................
}
public void method2() {
// do something ...
synchronized(lockB) {
b ++;
}
// ................
}
}
The above example uses more fine grained locks (2 locks instead one (lockA and lockB for variables a and b respectively) and as a result allows better concurrency, on the other hand it became more complex than the first example ...
While I agree about not adhering blindly to dogmatic rules, does the "lock stealing" scenario seem so eccentric to you? A thread could indeed acquire the lock on your object "externally"(synchronized(theObject) {...}), blocking other threads waiting on synchronized instance methods.
If you don't believe in malicious code, consider that this code could come from third parties (for instance if you develop some sort of application server).
The "accidental" version seems less likely, but as they say, "make something idiot-proof and someone will invent a better idiot".
So I agree with the it-depends-on-what-the-class-does school of thought.
Edit following eljenso's first 3 comments:
I've never experienced the lock stealing problem but here is an imaginary scenario:
Let's say your system is a servlet container, and the object we're considering is the ServletContext implementation. Its getAttribute method must be thread-safe, as context attributes are shared data; so you declare it as synchronized. Let's also imagine that you provide a public hosting service based on your container implementation.
I'm your customer and deploy my "good" servlet on your site. It happens that my code contains a call to getAttribute.
A hacker, disguised as another customer, deploys his malicious servlet on your site. It contains the following code in the init method:
synchronized (this.getServletConfig().getServletContext()) {
while (true) {}
}
Assuming we share the same servlet context (allowed by the spec as long as the two servlets are on the same virtual host), my call on getAttribute is locked forever. The hacker has achieved a DoS on my servlet.
This attack is not possible if getAttribute is synchronized on a private lock, because 3rd-party code cannot acquire this lock.
I admit that the example is contrived and an oversimplistic view of how a servlet container works, but IMHO it proves the point.
So I would make my design choice based on security consideration: will I have complete control over the code that has access to the instances? What would be the consequence of a thread's holding a lock on an instance indefinitely?
It depends on the situation.
If There is only one sharing entity or more than one.
See full working example here
A small introduction.
Threads and shareable entities
It is possible for multiple threads to access same entity, for eg multiple connectionThreads sharing a single messageQueue. Since the threads run concurrently there may be a chance of overriding one's data by another which may be a messed up situation.
So we need some way to ensure that shareable entity is accessed only by one thread at a time. (CONCURRENCY).
Synchronized block
synchronized() block is a way to ensure concurrent access of shareable entity.
First, a small analogy
Suppose There are two-person P1, P2 (threads) a Washbasin (shareable entity) inside a washroom and there is a door (lock).
Now we want one person to use washbasin at a time.
An approach is to lock the door by P1 when the door is locked P2 waits until p1 completes his work
P1 unlocks the door
then only p1 can use washbasin.
syntax.
synchronized(this)
{
SHARED_ENTITY.....
}
"this" provided the intrinsic lock associated with the class (Java developer designed Object class in such a way that each object can work as monitor).
Above approach works fine when there are only one shared entity and multiple threads (1: N).
N shareable entities-M threads
Now think of a situation when there is two washbasin inside a washroom and only one door. If we are using the previous approach, only p1 can use one washbasin at a time while p2 will wait outside. It is wastage of resource as no one is using B2 (washbasin).
A wiser approach would be to create a smaller room inside washroom and provide them one door per washbasin. In this way, P1 can access B1 and P2 can access B2 and vice-versa.
washbasin1;
washbasin2;
Object lock1=new Object();
Object lock2=new Object();
synchronized(lock1)
{
washbasin1;
}
synchronized(lock2)
{
washbasin2;
}
See more on Threads----> here
There seems a different consensus in the C# and Java camps on this. The majority of Java code I have seen uses:
// apply mutex to this instance
synchronized(this) {
// do work here
}
whereas the majority of C# code opts for the arguably safer:
// instance level lock object
private readonly object _syncObj = new object();
...
// apply mutex to private instance level field (a System.Object usually)
lock(_syncObj)
{
// do work here
}
The C# idiom is certainly safer. As mentioned previously, no malicious / accidental access to the lock can be made from outside the instance. Java code has this risk too, but it seems that the Java community has gravitated over time to the slightly less safe, but slightly more terse version.
That's not meant as a dig against Java, just a reflection of my experience working on both languages.
Make your data immutable if it is possible ( final variables)
If you can't avoid mutation of shared data across multiple threads, use high level programming constructs [e.g. granular Lock API ]
A Lock provides exclusive access to a shared resource: only one thread at a time can acquire the lock and all access to the shared resource requires that the lock be acquired first.
Sample code to use ReentrantLock which implements Lock interface
class X {
private final ReentrantLock lock = new ReentrantLock();
// ...
public void m() {
lock.lock(); // block until condition holds
try {
// ... method body
} finally {
lock.unlock()
}
}
}
Advantages of Lock over Synchronized(this)
The use of synchronized methods or statements forces all lock acquisition and release to occur in a block-structured way.
Lock implementations provide additional functionality over the use of synchronized methods and statements by providing
A non-blocking attempt to acquire a lock (tryLock())
An attempt to acquire the lock that can be interrupted (lockInterruptibly())
An attempt to acquire the lock that can timeout (tryLock(long, TimeUnit)).
A Lock class can also provide behavior and semantics that is quite different from that of the implicit monitor lock, such as
guaranteed ordering
non-re entrant usage
Deadlock detection
Have a look at this SE question regarding various type of Locks:
Synchronization vs Lock
You can achieve thread safety by using advanced concurrency API instead of Synchronied blocks. This documentation page provides good programming constructs to achieve thread safety.
Lock Objects support locking idioms that simplify many concurrent applications.
Executors define a high-level API for launching and managing threads. Executor implementations provided by java.util.concurrent provide thread pool management suitable for large-scale applications.
Concurrent Collections make it easier to manage large collections of data, and can greatly reduce the need for synchronization.
Atomic Variables have features that minimize synchronization and help avoid memory consistency errors.
ThreadLocalRandom (in JDK 7) provides efficient generation of pseudorandom numbers from multiple threads.
Refer to java.util.concurrent and java.util.concurrent.atomic packages too for other programming constructs.
The java.util.concurrent package has vastly reduced the complexity of my thread safe code. I only have anecdotal evidence to go on, but most work I have seen with synchronized(x) appears to be re-implementing a Lock, Semaphore, or Latch, but using the lower-level monitors.
With this in mind, synchronizing using any of these mechanisms is analogous to synchronizing on an internal object, rather than leaking a lock. This is beneficial in that you have absolute certainty that you control the entry into the monitor by two or more threads.
If you've decided that:
the thing you need to do is lock on
the current object; and
you want to
lock it with granularity smaller than
a whole method;
then I don't see the a taboo over synchronizezd(this).
Some people deliberately use synchronized(this) (instead of marking the method synchronized) inside the whole contents of a method because they think it's "clearer to the reader" which object is actually being synchronized on. So long as people are making an informed choice (e.g. understand that by doing so they're actually inserting extra bytecodes into the method and this could have a knock-on effect on potential optimisations), I don't particularly see a problem with this. You should always document the concurrent behaviour of your program, so I don't see the "'synchronized' publishes the behaviour" argument as being so compelling.
As to the question of which object's lock you should use, I think there's nothing wrong with synchronizing on the current object if this would be expected by the logic of what you're doing and how your class would typically be used. For example, with a collection, the object that you would logically expect to lock is generally the collection itself.
I think there is a good explanation on why each of these are vital techniques under your belt in a book called Java Concurrency In Practice by Brian Goetz. He makes one point very clear - you must use the same lock "EVERYWHERE" to protect the state of your object. Synchronised method and synchronising on an object often go hand in hand. E.g. Vector synchronises all its methods. If you have a handle to a vector object and are going to do "put if absent" then merely Vector synchronising its own individual methods isn't going to protect you from corruption of state. You need to synchronise using synchronised (vectorHandle). This will result in the SAME lock being acquired by every thread which has a handle to the vector and will protect overall state of the vector. This is called client side locking. We do know as a matter of fact vector does synchronised (this) / synchronises all its methods and hence synchronising on the object vectorHandle will result in proper synchronisation of vector objects state. Its foolish to believe that you are thread safe just because you are using a thread safe collection. This is precisely the reason ConcurrentHashMap explicitly introduced putIfAbsent method - to make such operations atomic.
In summary
Synchronising at method level allows client side locking.
If you have a private lock object - it makes client side locking impossible. This is fine if you know that your class doesn't have "put if absent" type of functionality.
If you are designing a library - then synchronising on this or synchronising the method is often wiser. Because you are rarely in a position to decide how your class is going to be used.
Had Vector used a private lock object - it would have been impossible to get "put if absent" right. The client code will never gain a handle to the private lock thus breaking the fundamental rule of using the EXACT SAME LOCK to protect its state.
Synchronising on this or synchronised methods do have a problem as others have pointed out - someone could get a lock and never release it. All other threads would keep waiting for the lock to be released.
So know what you are doing and adopt the one that's correct.
Someone argued that having a private lock object gives you better granularity - e.g. if two operations are unrelated - they could be guarded by different locks resulting in better throughput. But this i think is design smell and not code smell - if two operations are completely unrelated why are they part of the SAME class? Why should a class club unrelated functionalities at all? May be a utility class? Hmmmm - some util providing string manipulation and calendar date formatting through the same instance?? ... doesn't make any sense to me at least!!
No, you shouldn't always. However, I tend to avoid it when there are multiple concerns on a particular object that only need to be threadsafe in respect to themselves. For example, you might have a mutable data object that has "label" and "parent" fields; these need to be threadsafe, but changing one need not block the other from being written/read. (In practice I would avoid this by declaring the fields volatile and/or using java.util.concurrent's AtomicFoo wrappers).
Synchronization in general is a bit clumsy, as it slaps a big lock down rather than thinking exactly how threads might be allowed to work around each other. Using synchronized(this) is even clumsier and anti-social, as it's saying "no-one may change anything on this class while I hold the lock". How often do you actually need to do that?
I would much rather have more granular locks; even if you do want to stop everything from changing (perhaps you're serialising the object), you can just acquire all of the locks to achieve the same thing, plus it's more explicit that way. When you use synchronized(this), it's not clear exactly why you're synchronizing, or what the side effects might be. If you use synchronized(labelMonitor), or even better labelLock.getWriteLock().lock(), it's clear what you are doing and what the effects of your critical section are limited to.
Short answer: You have to understand the difference and make choice depending on the code.
Long answer: In general I would rather try to avoid synchronize(this) to reduce contention but private locks add complexity you have to be aware of. So use the right synchronization for the right job. If you are not so experienced with multi-threaded programming I would rather stick to instance locking and read up on this topic. (That said: just using synchronize(this) does not automatically make your class fully thread-safe.) This is a not an easy topic but once you get used to it, the answer whether to use synchronize(this) or not comes naturally.
A lock is used for either visibility or for protecting some data from concurrent modification which may lead to race.
When you need to just make primitive type operations to be atomic there are available options like AtomicInteger and the likes.
But suppose you have two integers which are related to each other like x and y co-ordinates, which are related to each other and should be changed in an atomic manner. Then you would protect them using a same lock.
A lock should only protect the state that is related to each other. No less and no more. If you use synchronized(this) in each method then even if the state of the class is unrelated all the threads will face contention even if updating unrelated state.
class Point{
private int x;
private int y;
public Point(int x, int y){
this.x = x;
this.y = y;
}
//mutating methods should be guarded by same lock
public synchronized void changeCoordinates(int x, int y){
this.x = x;
this.y = y;
}
}
In the above example I have only one method which mutates both x and y and not two different methods as x and y are related and if I had given two different methods for mutating x and y separately then it would not have been thread safe.
This example is just to demonstrate and not necessarily the way it should be implemented. The best way to do it would be to make it IMMUTABLE.
Now in opposition to Point example, there is an example of TwoCounters already provided by #Andreas where the state which is being protected by two different locks as the state is unrelated to each other.
The process of using different locks to protect unrelated states is called Lock Striping or Lock Splitting
The reason not to synchronize on this is that sometimes you need more than one lock (the second lock often gets removed after some additional thinking, but you still need it in the intermediate state). If you lock on this, you always have to remember which one of the two locks is this; if you lock on a private Object, the variable name tells you that.
From the reader's viewpoint, if you see locking on this, you always have to answer the two questions:
what kind of access is protected by this?
is one lock really enough, didn't someone introduce a bug?
An example:
class BadObject {
private Something mStuff;
synchronized setStuff(Something stuff) {
mStuff = stuff;
}
synchronized getStuff(Something stuff) {
return mStuff;
}
private MyListener myListener = new MyListener() {
public void onMyEvent(...) {
setStuff(...);
}
}
synchronized void longOperation(MyListener l) {
...
l.onMyEvent(...);
...
}
}
If two threads begin longOperation() on two different instances of BadObject, they acquire
their locks; when it's time to invoke l.onMyEvent(...), we have a deadlock because neither of the threads may acquire the other object's lock.
In this example we may eliminate the deadlock by using two locks, one for short operations and one for long ones.
As already said here synchronized block can use user-defined variable as lock object, when synchronized function uses only "this". And of course you can manipulate with areas of your function which should be synchronized and so on.
But everyone says that no difference between synchronized function and block which covers whole function using "this" as lock object. That is not true, difference is in byte code which will be generated in both situations. In case of synchronized block usage should be allocated local variable which holds reference to "this". And as result we will have a little bit larger size of function (not relevant if you have only few number of functions).
More detailed explanation of the difference you can find here:
http://www.artima.com/insidejvm/ed2/threadsynchP.html
Also usage of synchronized block is not good due to following point of view:
The synchronized keyword is very limited in one area: when exiting a synchronized block, all threads that are waiting for that lock must be unblocked, but only one of those threads gets to take the lock; all the others see that the lock is taken and go back to the blocked state. That's not just a lot of wasted processing cycles: often the context switch to unblock a thread also involves paging memory off the disk, and that's very, very, expensive.
For more details in this area I would recommend you read this article:
http://java.dzone.com/articles/synchronized-considered
This is really just supplementary to the other answers, but if your main objection to using private objects for locking is that it clutters your class with fields that are not related to the business logic then Project Lombok has #Synchronized to generate the boilerplate at compile-time:
#Synchronized
public int foo() {
return 0;
}
compiles to
private final Object $lock = new Object[0];
public int foo() {
synchronized($lock) {
return 0;
}
}
A good example for use synchronized(this).
// add listener
public final synchronized void addListener(IListener l) {listeners.add(l);}
// remove listener
public final synchronized void removeListener(IListener l) {listeners.remove(l);}
// routine that raise events
public void run() {
// some code here...
Set ls;
synchronized(this) {
ls = listeners.clone();
}
for (IListener l : ls) { l.processEvent(event); }
// some code here...
}
As you can see here, we use synchronize on this to easy cooperate of lengthly (possibly infinite loop of run method) with some synchronized methods there.
Of course it can be very easily rewritten with using synchronized on private field. But sometimes, when we already have some design with synchronized methods (i.e. legacy class, we derive from, synchronized(this) can be the only solution).
It depends on the task you want to do, but I wouldn't use it. Also, check if the thread-save-ness you want to accompish couldn't be done by synchronize(this) in the first place? There are also some nice locks in the API that might help you :)
I only want to mention a possible solution for unique private references in atomic parts of code without dependencies. You can use a static Hashmap with locks and a simple static method named atomic() that creates required references automatically using stack information (full class name and line number). Then you can use this method in synchronize statements without writing new lock object.
// Synchronization objects (locks)
private static HashMap<String, Object> locks = new HashMap<String, Object>();
// Simple method
private static Object atomic() {
StackTraceElement [] stack = Thread.currentThread().getStackTrace(); // get execution point
StackTraceElement exepoint = stack[2];
// creates unique key from class name and line number using execution point
String key = String.format("%s#%d", exepoint.getClassName(), exepoint.getLineNumber());
Object lock = locks.get(key); // use old or create new lock
if (lock == null) {
lock = new Object();
locks.put(key, lock);
}
return lock; // return reference to lock
}
// Synchronized code
void dosomething1() {
// start commands
synchronized (atomic()) {
// atomic commands 1
...
}
// other command
}
// Synchronized code
void dosomething2() {
// start commands
synchronized (atomic()) {
// atomic commands 2
...
}
// other command
}
Avoid using synchronized(this) as a locking mechanism: This locks the whole class instance and can cause deadlocks. In such cases, refactor the code to lock only a specific method or variable, that way whole class doesn't get locked. Synchronised can be used inside method level.
Instead of using synchronized(this), below code shows how you could just lock a method.
public void foo() {
if(operation = null) {
synchronized(foo) {
if (operation == null) {
// enter your code that this method has to handle...
}
}
}
}
My two cents in 2019 even though this question could have been settled already.
Locking on 'this' is not bad if you know what you are doing but behind the scene locking on 'this' is (which unfortunately what synchronized keyword in method definition allows).
If you actually want users of your class to be able to 'steal' your lock (i.e. prevent other threads from dealing with it), you actually want all the synchronized methods to wait while another sync method is running and so on.
It should be intentional and well thought off (and hence documented to help your users understand it).
To further elaborate, in the reverse you must know what you are 'gaining' (or 'losing' out on) if you lock on a non accessible lock (nobody can 'steal' your lock, you are in total control and so on...).
The problem for me is that synchronized keyword in the method definition signature makes it just too easy for programmers not to think about what to lock on which is a mighty important thing to think about if you don't want to run into problems in a multi-threaded program.
One can't argue that 'typically' you don't want users of your class to be able to do these stuff or that 'typically' you want...It depends on what functionality you are coding. You can't make a thumb rule as you can't predict all the use cases.
Consider for e.g. the printwriter which uses an internal lock but then people struggle to use it from multiple threads if they don't want their output to interleave.
Should your lock be accessible outside of the class or not is your decision as a programmer on the basis of what functionality the class has. It is part of the api. You can't move away for instance from synchronized(this) to synchronized(provateObjet) without risking breaking changes in the code using it.
Note 1: I know you can achieve whatever synchronized(this) 'achieves' by using a explicit lock object and exposing it but I think it is unnecessary if your behaviour is well documented and you actually know what locking on 'this' means.
Note 2: I don't concur with the argument that if some code is accidentally stealing your lock its a bug and you have to solve it. This in a way is same argument as saying I can make all my methods public even if they are not meant to be public. If someone is 'accidentally' calling my intended to be private method its a bug. Why enable this accident in the first place!!! If ability to steal your lock is a problem for your class don't allow it. As simple as that.
Let me put the conclusion first - locking on private fields does not work for slightly more complicated multi-threaded program. This is because multi-threading is a global problem. It is impossible to localize synchronization unless you write in a very defensive way (e.g. copy everything on passing to other threads).
Here is the long explanation:
Synchronization includes 3 parts: Atomicity, Visibility and Ordering
Synchronized block is very coarse level of synchronization. It enforces visibility and ordering just as what you expected. But for atomicity, it does not provide much protection. Atomicity requires global knowledge of the program rather than local knowledge. (And that makes multi-threading programming very hard)
Let's say we have a class Account having method deposit and withdraw. They are both synchronized based on a private lock like this:
class Account {
private Object lock = new Object();
void withdraw(int amount) {
synchronized(lock) {
// ...
}
}
void deposit(int amount) {
synchronized(lock) {
// ...
}
}
}
Considering we need to implement a higher-level class which handles transfer, like this:
class AccountManager {
void transfer(Account fromAcc, Account toAcc, int amount) {
if (fromAcc.getBalance() > amount) {
fromAcc.setBalance(fromAcc.getBalance() - amount);
toAcc.setBalance(toAcc.getBalance + amount);
}
}
}
Assuming we have 2 accounts now,
Account john;
Account marry;
If the Account.deposit() and Account.withdraw() are locked with internal lock only. That will cause problem when we have 2 threads working:
// Some thread
void threadA() {
john.withdraw(500);
}
// Another thread
void threadB() {
accountManager.transfer(john, marry, 100);
}
Because it is possible for both threadA and threadB run at the same time. And thread B finishes the conditional check, thread A withdraws, and thread B withdraws again. This means we can withdraw $100 from John even if his account has no enough money. This will break atomicity.
You may propose that: why not adding withdraw() and deposit() to AccountManager then? But under this proposal, we need to create a multi-thread safe Map which maps from different accounts to their locks. We need to delete the lock after execution (otherwise will leak memory). And we also need to ensure no other one accesses the Account.withdraw() directly. This will introduce a lots of subtle bugs.
The correct and most idiomatic way is to expose the lock in the Account. And let the AccountManager to use the lock. But in this case, why not just use the object itself then?
class Account {
synchronized void withdraw(int amount) {
// ...
}
synchronized void deposit(int amount) {
// ...
}
}
class AccountManager {
void transfer(Account fromAcc, Account toAcc, int amount) {
// Ensure locking order to prevent deadlock
Account firstLock = fromAcc.hashCode() < toAcc.hashCode() ? fromAcc : toAcc;
Account secondLock = fromAcc.hashCode() < toAcc.hashCode() ? toAcc : fromAcc;
synchronized(firstLock) {
synchronized(secondLock) {
if (fromAcc.getBalance() > amount) {
fromAcc.setBalance(fromAcc.getBalance() - amount);
toAcc.setBalance(toAcc.getBalance + amount);
}
}
}
}
}
To conclude in simple English, private lock does not work for slightly more complicated multi-threaded program.
(Reposted from https://stackoverflow.com/a/67877650/474197)
I think points one (somebody else using your lock) and two (all methods using the same lock needlessly) can happen in any fairly large application. Especially when there's no good communication between developers.
It's not cast in stone, it's mostly an issue of good practice and preventing errors.