I am a newbie to annotations. I have gone through a lot of tutorials explaining the concept of annotations. But nowhere do i find information about defining multiple annotations within a class. So pls give me some insight on defining and accessing multiple annotations.Below is the code where I define two annotations in a class and eclipse IDE presents me an error "The public type SampleAnn must be defined in its own file".. Is the reason for this error because of the java convention that "there should only one public annotation per class in the name of the class-name"?
#Documented
#Target(ElementType.LOCAL_VARIABLE)
#Inherited
#Retention(RetentionPolicy.RUNTIME)
public #interface MethodInfo{
int number1;
}
#Documented
#Target(ElementType.LOCAL_VARIABLE)
#Retention(RetentionPolicy.RUNTIME)
public #interface SampleAnn{
int number2;
}
You are right, you can have only a single top-level class in one file.
But what you can do:
public class MyAnnotations {
public #interface SampleAnn { ... }
public #interface MethodInfo { ... }
}
There should more generally be ONE public CLASS per class file and annotations are no exception. It is also important that any publicly defined entity has the same name as its java file's name, so I don't see how you could have two in the same file.
The annotations need to be in separate compilation units (files).
The regarding top-level classes the specification states:
This restriction implies that there must be at most one such type per
compilation unit. This restriction makes it easy for a Java compiler
to find a named class within a package. In practice, many programmers
choose to put each class or interface type in its own compilation
unit, whether or not it is public or is referred to by code in other
compilation units.
Specification
Related
In the javadoc for java.lang.annotation.RetentionPolicy it says that:
SOURCE: Annotations are to be discarded by the compiler.
CLASS: Annotations are to be recorded in the class file by the compiler but need not be retained by the VM at run time. This is the default behavior.
RUNTIME: Annotations are to be recorded in the class file by the compiler and retained by the VM at run time, so they may be read reflectively.
I understand, that RUNTIME is used to access it using the reflection API, SOURCE for compiler related information (and maybe documentation) and CLASS, as far as I could find out, for special cases, like bytecode manipulation tools, etc. and also compiler related stuff, like #FunctionInterface.
But why is CLASS the default? I expect most annotations to be annotated with RUNTIME, because I think, that most programmers use annotations to specify metadata, that should be read through the reflection API at runtime, because the average programmer doesn't play around with the generated bytecode (at least I've never done it).
So why is RUNTIME not the default? Is there any use case for CLASS, that at I'm not aware of? Or is this just another case of this decision was made long ago, for now unknown or irrelevant reasons and can't be changed, because that would break stuff.
At least for beginners, it may be very confusing and can lead to bugs, that the code
package test;
import java.lang.annotation.Annotation;
import test.Test.Example;
#Example("example")
public class Test {
public static void main(String[] args) {
Annotation[] annotations = Test.class.getAnnotations();
if (annotations.length == 0) {
System.out.println("Class Test has no annotations");
} else {
System.out.println("Class Test has the following annotations:");
for (Annotation annotation : annotations) {
System.out.println("\t" + annotation.toString());
}
}
}
// #Retention(RetentionPolicy.RUNTIME)
public static #interface Example {
public String value();
}
}
outputs "Class Test has no annotations" without the #Retention meta annotation.
We have feature files that have long tests that validate multiple things written in non-english language, the Given -> When -> Then structure doesn't make sense.
I tried replacing feature file keywords with *, and that works just fine, however here are the problems:
When writing a new step in a form of * Some step, and using Alt->Enter shortcut to generate a step definition, IntelliJ IDEA does... Nothing. It only opens the file where I wanted to put the definition without any added code. I've updated IDE and plugins to be latest.
There doesn't seem to be any way to have a "universal" annotation to use for asterisk steps, only Given, When, Then, And, But exists. It's not very logical to have a * Some step feature and #Given("Some step") definition.
Is there any workaround that I might use?
I think you can achieve this with few coding steps.
Say you have the scenario like this:
Feature: Generic annotation
Scenario: Testing annotations
* having asterix
* use custom generic annotation
Add custom annotation to your sources
package click.webelement.cucumber;
import io.cucumber.java.StepDefinitionAnnotation;
import io.cucumber.java.StepDefinitionAnnotations;
import org.apiguardian.api.API;
import java.lang.annotation.*;
#Retention(RetentionPolicy.RUNTIME)
#Target(ElementType.METHOD)
#StepDefinitionAnnotation
#Documented
#Repeatable(MyStep.MySteps.class)
#API(status = API.Status.STABLE)
public #interface MyStep {
String value();
#Target(ElementType.METHOD)
#Retention(RetentionPolicy.RUNTIME)
#StepDefinitionAnnotations
#Documented
#interface MySteps {
MyStep[] value();
}
}
Now use it in your Step Definition
package click.webelement.cucumber;
public class StepDef {
#MyStep("having asterix")
public void doOne(){
System.out.println("Running having asterix");
}
#MyStep("use custom generic annotation")
public void doTwo(){
System.out.println("Running use custom generic annotation");
}
}
UPD
In order to make your Idea plugin work with your custom annotation you need to place that annotation to
io.cucumber.java.LANG package where LANG is the sub-package for your chosen language.
To make everything work as default you place it to
io.cucumber.java.en
In Java annotations marked as #Inherited will only work when annotating classes:
Note that this meta-annotation type has no effect if the annotated
type is used to annotate anything other than a class. Note also that
this meta-annotation only causes annotations to be inherited from
superclasses; annotations on implemented interfaces have no effect.
So interfaces or methods annotated with an #Inherited annotation will not result in implementing classes/methods to also be annotated with the annotation. The reason for this is most likely, that the compiler would'n know which of the annotations to choose, if there are multiple annotations in the class hierarchy as described here.
Now Java 8 introduced the new annotation #Repeatable. I think it would have been natural to remove the above restrictions for annotations that are both marked as #Inherited and #Repeatable, because the compiler should then be able to add the conflicting annotations to the #Repeatable annotation.
Given the following example:
import java.lang.annotation.Inherited;
import java.lang.annotation.Repeatable;
import java.lang.annotation.Retention;
import java.lang.annotation.RetentionPolicy;
import java.lang.annotation.Target;
#Retention(RetentionPolicy.RUNTIME)
#Target(ElementType.TYPE)
#Inherited
#interface RepeatableAnnotations {
RepeatableAnnotation[] value();
}
#Retention(RetentionPolicy.RUNTIME)
#Target(ElementType.TYPE)
#Inherited
#Repeatable(RepeatableAnnotations.class)
#interface RepeatableAnnotation {
String value();
}
#RepeatableAnnotation("A")
interface IntefaceA {}
#RepeatableAnnotation("B")
interface IntefaceB {}
#RepeatableAnnotation("C")
#RepeatableAnnotation("D")
public class TestClass implements IntefaceA, IntefaceB {
public static void main(String[] args) {
for (RepeatableAnnotation a : TestClass.class.getAnnotation(RepeatableAnnotations.class).value()) {
System.out.print(a.value());
}
}
}
I would have hoped the output to be ABCD but it is "just" CD (i.e. #Inherited is working exactly like pre Java 8).
Does anyone know if there was good reason for not removing the #Inherited restrictions regarding interfaces and methods in the case of #Repeatable annotations for Java 8?
Is there any workaround to achieve the ABCD output for the above type hierarchy? (other than using reflection to scan the super interfaces for annotations...)
Please recall the documentation of #Inherited:
If an Inherited meta-annotation is present on an annotation type declaration, and the user queries the annotation type on a class declaration, and the class declaration has no annotation for this type, then the class's superclass will automatically be queried for the annotation type.
In other words, #Inherited never was intended to be a feature for collecting multiple annotations on a type hierarchy. Instead, you will get the annotation of the most specific type which has an explicit annotation.
In other words, if you change your declaration to
#RepeatableAnnotation("FOO") #RepeatableAnnotation("BAR") class Base {}
#RepeatableAnnotation("C") #RepeatableAnnotation("D")
public class TestClass extends Base implements IntefaceA, IntefaceB {
it won’t change the result; FOO and BAR of Base are not inherited by TestClass as it has the explicit annotation values C and D.
Expanding this to the interface hierarchy would be awkward due to the multiple inheritance and the fact that a super-interface may turn out to be a sub-interface of another super-interface so finding the most specific one is not trivial. This differs heavily from the linear search of the superclass hierarchy.
You may encounter the situation where multiple unrelated annotated interfaces exist but it’s not clear why this ambiguity should be resolved by joining them into one repeated annotation. This would not harmonize with the behavior in all other scenarios.
Note that the answer you have linked is a bit odd as it shows code using a method annotation but method annotations are never inherited, regardless of whether you specified #Inherited or not (an audit tool should generate a warning when you combine #Target(ElementType.METHOD) with #Inherited, imho). #Inherited is relevant for type annotations only.
but I found this thread searching for a similar solution. In the end I wrote this helper method:
#Retention(RetentionPolicy.RUNTIME)
#Target(ElementType.TYPE)
public #interface Labels
{
Label[] value();
}
#Retention(RetentionPolicy.RUNTIME)
#Target(ElementType.TYPE)
#Repeatable(Labels.class)
public #interface Label
{
String value();
}
#Label("A")
class A
{
}
#Label("B")
class B extends A
{
}
#Test
void LabelStackTest()
{
var labels = ClassUtils.getAnnotatedLabels(B.class);
assertThat(labels).contains("A");
assertThat(labels).contains("B");
}
public static List<String> getAnnotatedLabels(Class<?> labeledClass)
{
var labels = new ArrayList<String>();
do
{
labels.addAll(Arrays.asList(labeledClass.getAnnotationsByType(Label.class))
.stream()
.map(labelAnnotations -> labelAnnotations.value())
.toList());
labeledClass = labeledClass.getSuperclass();
} while (labeledClass != Object.class);
return labels;
}
I have created my own annotation type like this:
public #interface NewAnnotationType {}
and attached it to a class:
#NewAnnotationType
public class NewClass {
public void DoSomething() {}
}
and I tried to get the class annotation via reflection like this :
Class newClass = NewClass.class;
for (Annotation annotation : newClass.getDeclaredAnnotations()) {
System.out.println(annotation.toString());
}
but it's not printing anything. What am I doing wrong?
The default retention policy is RetentionPolicy.CLASS which means that, by default, annotation information is not retained at runtime:
Annotations are to be recorded in the class file by the compiler but need not be retained by the VM at run time. This is the default behavior.
Instead, use RetentionPolicy.RUNTIME:
Annotations are to be recorded in the class file by the compiler and retained by the VM at run time, so they may be read reflectively.
...which you specify using the #Retention meta-annotation:
#Retention(RetentionPolicy.RUNTIME)
public #interface NewAnnotationType {
}
Having the default Retention of an annotation does not mean that you can not read it at run-time.
Since
Annotations are to be recorded in the class file by the compiler
but need not be retained by the VM at run time. This is the default behavior.
It is possible to access them reading the .class file directly
This can be accomplished by using the ASM library (handling some corner cases, of course).
Check out its excellent User guide. In particular section 4.2 Annotations.
You may want to refer to the Spring framework's handling of such annotations (it uses shaded asm dependency):
SimpleAnnotationMetadataReadingVisitor
AnnotationMetadataReadingVisitor (deprecated)
I was trying to go through some online material to learn annotation in java.
In the following code, what happened to my dear "Hello world" string which I passed in this line: #Test_Target(doTestTarget="Hello World !")?
#Target(ElementType.METHOD)
public #interface Test_Target {
public String doTestTarget();
}
above is the annotation defined and below is its usage
public class TestAnnotations {
#Test_Target(doTestTarget="Hello World !")
private String str;
public static void main(String arg[]) {
new TestAnnotations().doTestTarget();
}
public void doTestTarget() {
System.out.printf("Testing Target annotation");
}
}
When I run this code it is only printing Testing Target annotation
Please help me out, I am completely new to annotation.
Annotations are basically bits of data you can attach to fields, methods, classes, etc.
The syntax for declaring annotations in Java is a little awkward. They look a bit like interfaces (they are, after all, declared with #interface), but they aren't really interfaces. I think you might have put the doTestTarget() method in your TestAnnotations class because you thought your annotation was an interface and you needed to implement it. This isn't true - you can delete this method and the call to it from your code if you wish and doing so won't cause you any problems.
Also, you might not have intended to put the annotation on the field str. Annotations apply only to what immediately follows them. As a result, your code doesn't compile, because you've applied your annotation to a field but declared that your annotation can only be applied to methods. Change #Target(ElementType.METHOD) to #Target(ElementType.FIELD) and your code should then compile.
As for what happens to the string Hello World !, it gets written to the .class file and is available to any tool that reads in Java classes. However, it wouldn't necessarily be available in the JVM at runtime. This happens because you didn't specify a #Retention for your #Test_Target annotation. The default value for #Retention is RetentionPolicy.CLASS, which means that the JVM might not bother to load them out of the class file. (See the Javadoc for the RetentionPolicy enum.)
I imagine you want to see some way of reading the value out of this annotation at runtime. If so, I'd recommend adding #Retention(RetentionPolicy.RUNTIME) to your annotation to make sure it will be available at runtime.
To access your annotation and the value contained within it at runtime, you need to use reflection. I've rewritten your TestAnnotations class as follows to give a quick demonstration:
import java.lang.reflect.Field;
public class TestAnnotations {
#Test_Target(doTestTarget="Hello World !")
private String str;
public static void main(String[] args) throws Exception {
// We need to use getDeclaredField here since the field is private.
Field field = TestAnnotations.class.getDeclaredField("str");
Test_Target ann = field.getAnnotation(Test_Target.class);
if (ann != null) {
System.out.println(ann.doTestTarget());
}
}
}
When I run this code, it gives me the following output:
Hello World !
In principle, adding an annotation by itself does not fundamentally alter the programs behaviour.
In your case, you created a new annotation type #Test_Target, which can by used on any method (as indicated by its #Target annotation).
Then you applied this not to a method, but to the str field (which should give a compiler error, I think).
Independently of this, you are creating an object with a doTestTarget method, and invoke it, and get the expected result (i.e. the method is executed).
If you want your annotation to do something more than simply be there and provide some information for the reader of the source, you have to use it - either with an annotation processor at compile time, or using reflection on run time (then you would need also #Retention(RUNTIME) as an annotation on Test_Target.)
In the spirit of learning, another way is to use the annotated class without targeting a method or field.
First declare your interface with the method you need and Retention Policy to Runtime
import java.lang.annotation.*;
#Retention(RetentionPolicy.RUNTIME)
public #interface Test_Target {
public String doTestTarget() default "default string";
}
then annotate the interface created to your class. From your class find the annotated class and then call the method with it.
import java.lang.annotation.Annotation;
import java.lang.reflect.AnnotatedElement;
#Test_Target(doTestTarget="Hello World !")
public class TestAnnotations {
public static void main(String[] args) throws Exception
{
AnnotatedElement c = TestAnnotations.class;
if(c.isAnnotationPresent(Test_Target.class))
{
Annotation singleAnnotation = c.getAnnotation(Test_Target.class);
Test_Target tt = (Test_Target) singleAnnotation;
System.out.println(tt.doTestTarget());
}
}
}
the result is:
Hello World !