Related
I work on a project using database. When i change some query change to get some values from the database NetBeans IDE gives me past coding changes result. But if i press the Clean and Build the project it is working fine. This consumes lot of my time.
How to fix this? Whenever i open NetBeans IDE it shows this dialog box
When i press "Yes" that opens the NetBeans IDE.
This started to happen after i changed the jdk version from 8 to 9. It seems NetBeans 8.1 does not work with jdk 9 so i again installed jdk 8.
After that install this message showing when i start NetBeans. I have no idea this is affect to above problem i have mentioned. So actually i have two problems.
i have installed jdk1.8.0_172 and i given environment variable correct path. but that is still same –
JAVA_HOME: C:\Program Files\Java\jdk1.8.0_172\bin
To solve invalid home specifieid error in netbeans follow below instructions
Go to C:\Program Files\NetBeans 8.0.2\etc
Open the file netbeans.conf then change netbeans_jdkhome to the path of your JDK, netbeans_jdkhome="C:\Program Files\Java\jdk1.8.0_172"
Make sure netbeans.conf run as administrator.
If you are not sure about the version of jdk, you can find it by typing in CMD java -version
I downloaded Android Studio and attempted to launch the program.
This is running on Windows 7 64-bit with Java 1.7. During the installation, my Java 1.7 is detected, and the rest of the installation goes through just fine. However, when attempting to launch the application from the desktop icon, nothing happens. Looking at the task manager, a new process from the CMD is loaded. This is because it's attempting to run the batch file studio.bat.
When I execute via CMD, I get the following error:
ERROR: cannot start Android Studio. No JDK found. Please validate
either ANDROID_STUDIO_JDK or JDK_HOME or JAVA_HOME points to valid
JDK installation. ECHO is off. Press any key to continue . . .
I've attempted to open the idea properties file to see if there was something I could configure for this ANDROID_STUDIO_JDK or something like that. However, I found nothing. I hope some of you can let me know if you were able to install this or if you are having problems as well.
Adding a system variable JDK_HOME with value c:\Program Files\Java\jdk1.7.0_21\ worked for me. The latest Java release can be downloaded here.
Additionally, make sure the variable JAVA_HOME is also set with the above location.
OK, I figured out how fix this nasty bug.
Before you start
Go to your Android Studio installation folder and locate the bin folder. Inside the bin folder, you will find studio.bat. Execute the file, and it'll show the error. If it is about the Java path then follow the tip 1.
Tip 1
When you set the path JAVA_HOME, etc., make sure not to include bin at the end of the path. This solved the issue for me.
JAVA_HOME => C:\Program Files\Java\jdk1.7.0_21
path => C:\Program Files\Java\jdk1.7.0_21\bin
It works fine with JDK 1.7 (I tried with 32 bit).
If you do so, you can see the initial screen as below.
Tip 2
Are you getting the below error message?
Your Android SDK is out of date or is missing templates. Please ensure
you are using SDK version 22 or later.
This error probably occurs, because you have reference to your older SDK (that you downloaded with Eclipse) in your path variable. Go to Environment variables and remove any reference to the old SDK folder and point it to new SDK folder that is found inside the Android Studio installation folder.
Save and restart Studio, things should work as expected now.
Tip 3
If you hate messing around with the path variable as given above by removing old references, simply follow the following steps to refer to new SDK path that comes with Studio.
*Project Defaults* -> *Project Structure* -> Click "New" -> Select "Android SDK" -> Select the SDK folder inside the studio installation.
With the last update of Android Studio, I have two versions of the IDE's launcher
One is called studio.exe and the other studio64.exe they are both on:
C:\Users\myUserName\AppData\Local\Android\android-studio\bin
You have to launch the one that matches your Java version 64 or 32 bit
I had the same issue. I got resolved setting up correctly the environment variables in windows, for instance:
JAVA_HOME -> C:\Program Files\Java\jdk1.6.0_45
path -> C:\Program Files\Java\jdk1.6.0_45\bin
I've tried so many of the answers here but none of them works, so I decided to mix some of the answers here and I am successful!
Step 1: Go to the system properties by right-clicking on My Computer or by pressing windows button on typing This PC and right clicking on it and selecting Properties.
Step 2: Click the advanced system settings or Environment Variables
Step 3: Take note that there are 2 different variable. What you need to create is system variables not user variables, when you clicked new type the following
Variable name: JAVA_HOME
Variable value: C:\Program Files\Java\jdk1.8.0_25\ (Note: Please check if the path is right, sometimes it is C:\Program Files (x86)\Java\jdk1.8.0_25)
Step 4: Run the android studio, no need to restart.
Note:
*C:\Program Files\Java\jdk1.8.0_25\ depends entirely on the installation path of your JDK not JRE so don't be confused if you see something like the picture below. Just enter the location of your jdk, in my case it is C:\Program Files\Java\jdk1.8.0_25\.
*Do not include the bin folder when you enter the Variable value.
Edit: For Windows 8 and 10 Users: Try to run C:\Program Files\Android\Android Studio\bin\studio.exe instead of C:\Program Files\Android\Android Studio\binstudio64.exe
I had the same issue. I am having 64-bit windows 8. I downloaded the android studio which worked on a 32-bit machine but not on my 64-bit.
The solution for me was pretty simple. I navigated to
C:\Program Files (x86)\Android\android-studio\bin
there I saw 2 exe files studio.exe and studio64.exe. Normally my start menu was pointing to studio64.exe which always kept on giving me "The environmental variable JDK_HOME does not point to valid JVM". So then I clicked studio.exe and it worked :)
I hope this may help someone facing the same problem as me
The path for the latest JDK. It worked very well.
If you are getting message "Your Android SDK is out of date…" — click "Configure" —> "Project Defaults" —> "Project Structure", pick "SDKs" —> "Android SDK" and in a "Build Target" choose "Android 4.2.2". Click "OK". Now it should work fine.
I got the problem that the installation stopped by the "$(^name) has stopped working" error. I have installed the Java SE Development kit already, and also set both SDK_HOME and JAVA_HOME that point to "C:\Program Files\Java\jdk1.7.0_21"
My laptop installed with Windows 7 64 bits
So I tried to install the 32-bit version of the Java SE Development kit, and set my JAVA_HOME to "C:\Program Files (x86)\Java\jdk1.7.0_21", restart and the installation worked OK.
This problem has been fixed in Android Studio v0.1.1, so just update Android Studio and it should work.
Sometimes you can resolve this type of issue by setting environment variables so the process looks for the JDK in the right spot.
Another approach is to figure out where the process is looking, then put your JDK there.
I've had lots of success using Process Monitor from Sysinternals:
Start -> Run -> procmon
Go to the Filter menu, then select Filter...
Set Event Class is File System then Include
Add, then OK
This will filter down to all the file system operations taking place on your machine.
You could try filtering based on the result of the File System operation:
Right click on the Result column, then Exclude 'SUCCESS'
You can also quite easily filter based on the process name, either from the Filter... menu option or by right clicking on the Process Name column and selecting Include 'process.exe'.
Once you find the file system operation that's failing, the Path column will tell you where to put your JDK.
I've found this to be very empowering. Especially compared to the frustrating process of changing environment variables by trial and error.
My issue was caused because I have an & character in my Windows user name, so when installed in the default path I was getting the following error after running bin/studio.bat
|
v notice broken path
The system cannot find the file C:\Users\Daniel \studio64.exe.vmoptions.
Exception in thread "main" java.lang.NoClassDefFoundError: com/intellij/idea/Main
Caused by: java.lang.ClassNotFoundException: com.intellij.idea.Main
at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
at java.lang.ClassLoader.loadClass(ClassLoader.java:247)
Could not find the main class: com.intellij.idea.Main. Program will exit.
So I uninstalled and reinstalled it to program files and it launches fine now.
I couldn't get this to work no matter which environment variables I set. So I simply put a copy of the JDK into my Android Studio installation folder.
Copy the contents of the JDK installation (for example, C:\Program Files (x86)\Java\jdk1.7.0_21)
Paste them into the installation directory of the Android Studio (for example, C:\Program Files (x86)\Android\android-studio)
I somewhat assumed that the issue was caused by having the x64 version of the JDK installed. But what was especially confusing was the fact that I could start Android Studio just fine when I started the studio.bat as an Administrator (even though the environment variables were set for my personal user account).
studio.bat will look for several valid options when determining which JDK to use.
:: Locate a JDK installation directory which will be used to run the IDE.
:: Try (in order): ANDROID_STUDIO_JDK, ..\jre, JDK_HOME, JAVA_HOME.
As explained above, I picked the ..\jre option.
Today I found another situation when this problem occures - when you have several JDK, defined in JAVA_PATH. I have:
JAVA_HOME = C:\JAVA\JDK\jdk1.6.0_38;C:\JAVA\JDK\jdk1.7.0_10
So I received this problem with Android Studio setup
But when I've removed one of JDK - problem has been solved:
JAVA_HOME = C:\JAVA\JDK\jdk1.7.0_10
Installation wisard found my jdk and i had a nice night to study studio.
But unfortunatelly even installed studio doesn't work with several jdk.
Does anybody know how to fix it?
I hope I've helped someone
Add JAVA_HOME and JDK_HOME system environment variables.
Right-click
android studio (the 64 version if that's your OS and JDK) and go to
compatibility tab and set "Run as administrator" to true.
Run android studio and high-five me virtually when it works.
If that fails, try "where java" in cmd.exe. If it lists c:\system32\java.exe first, then rename the file and try again.
Windows 64 bit, JDK 64 bit (Solution that worked for me)
Tried all the above solutions, and None of them worked, I have been trying to solve it for the past few days and now I did it successfully. For me the problem was when I first installed Android Studio my JDK version was 1.7, then after installing I updated the JDK to 1.8, then I removed the old JDK folder and everything was messed up, even uninstalling and reinstalling android studio randomly didn't solve the issue.
Below is the solution that worked for me
Uninstall Android Studio.
clean temp files and android studio C:\Users\Username.AndroidStudio1.5
Uninstall JDK.
Now without JDK try to install Android Studio and now it will show the message that it can't find any JDK. Stop installation
Install JDK 1.7 or 1.8 (Set JAVA_HOME, JDK_HOME, path Environment variables as explained by everybody above)
Install Android Studio.
Done. Enjoy and happy coding.
MAKE SURE YOU RESTART ANDROID STUDIO
Even though I should know better and swear I did, make sure you restart studio after making these changes as it clearly does not check them on every build (which to me makes sense that system/user variables should only be read once on startup)
Anyway, yea... Make sure you restart after you make these changes.
Path = to the bin folder in the jdk folder (path already exists)
JAVA_HOME = to the jdk folder
Install the latest JDK in your system from JDK 7 and JRE 7 Installation Guide.
JAVA_HOME -> C:\Program Files\Java\jdk1.7.0_4
path -> C:\Program Files\Java\jdk1.7.0_4\bin
If setting the JAVA_HOME variable doesn't work for you, set:
STUDIO_JDK=C:\Progra~1\Java\jdk1.8.0_172
Where the path points to your JDK installation
This is the only thing which works for me in Windows 32bit with Android 10 and up.
In my experience, I was unable (even after adding JDK_HOME) to launch Studio via either the shortcut or studio.exe itself. I had to first run bin/studio.bat (mentioned in the original question).
After the first successful launch, I'm able to start it with the shortcut.
If you have a 64 bit windows OS, pointing the JAVA_HOME system variable to
C:\Program Files (x86)\Java\jdk1.7.0_21
Will work when
C:\Program Files\Java\jdk1.7.0_21
fails to work.
You need 1.7 JDK installed on your system. Add a system variable with:
name: ANDROID_STUDIO_JDK
path: your JDK path (for example, C:\Program Files\Java\jdk1.7.0_21)
See more at FIX: Android Studio - Installation Issues on Windows 7 | ERROR: cannot start Android Studio. No JDK found.
TRY TO INSTALL 32BIT JDK
if you have jdk installed and had set up the System Varibles such as JAVA_HOME or JDK_HOME
and tried click back and then next ,you might have installed the 64bit JDK,just download the 32bit jdk and install it.
I downloaded the latest jdk version
JAVA_HOME to C:\Program Files\Java\jdk1.8.0_11\bin
Set the PATH to C:\Program Files\Java\jdk1.8.0_11\bin
I restarted the STUDIO and it worked.
On Windows 10, restarting the installer and running as admin worked for me.
To complete this stack of possible solutions: For me the problem was, that I did not execute the Android-Studio-Setup as administrator. Running it as administrator then made me able to install Android-Studio.
For me, the problem was that I had changed the GC vm arg to -XX:+UseParallelGC in the C:\Users\<username>\.AndroidStudio2.1\studio64.exe.vmoptions file. That's what I use in Eclipse and I was trying various things to get AndroidStudio half way as efficent as Eclipse. I restored the GC to -XX:+UseConcMarkSweepGC.
The answer to the original question is that, might be you are opening android studio from 32 bit shortcut icon of android studio, try to open from icon "studio64" located under .../bin/ where android studio setup is install.
In case you had it running but Now it doesn't Launch.
I deleted the C:\Users\<NAME>\.AndroidStudio<version>\ folder and it worked.
at the beginning it says that failed to find java jdk or jre so i installed it. then i run it again it came up this.
It says that "Failed to find a Main Class in ... eclipse\\plugins/org.eclipse.equinox.launcher_1.3.0.v20140415-2008.jar"
java file are under
C:\Program Files (x86)\Java\jre1.8.0_31 && jre7
C:\Program Files\Java\jdk1.8.0_31 && jre1.8.0_31
my eclipse file are under
D:\迅雷下载\操作系统\eclipse
can someone tell me how to fix this ??
I was facing the similar issue where on launching eclipse photon it was giving error like:
Failed to find a Main Class in ...
eclipse\\plugins/org.eclipse.equinox.launcher*.jar
One of the reasons in my case was that I had two JDK versions on my system (JDK 6 & JDK 8).
It was running fine but stopped when I updated JAVA_HOME as JDK 6.
To rectify it, I added the below lines in the eclipse.ini file before -vmargs:
-vm
C:/Program Files/Java/jdk1.8.0_111/bin/javaw.exe
-vmargs
Basically, I passed the JDK 8 path to the eclipse as required version for eclipse photon was Java 8. And this got me working.
Try to move eclipse to some simpler path, like D:\development\eclipse
This error is due to because you might have downgraded the version of java in your environmental variables.Try changing the java version in environmental variables and then run the sts or eclipse..for better practice restart the system.hope it helps.!!
I do not mean to steal the first answer - it did help me solve my very similar issue.
I am running Windows 8 x64 bit and installed a modded version of Eclipse in a custom path (rather the default install location that was suggested) - and I got that error.
So, I deleted that Eclipse install. Then installed both x86 and x64 versions of JDK (to their default install locations), and repeated the Eclipse install to the default install location - that solved the problem for me!!!
The reason I installed both JDK versions was because I initially installed only the x64 bit version and a different error came. So I removed that Eclipse again, and repeated the JDK with both versions, etc...
I was on this problem for like an hour and a half not getting that if you save the eclipse file in a non-English named folder it doesn't open.
Hope it helps :)
Check if there are 2 Java paths mentioned in the system Variable "Path"
If yes, Move up the Java path which is mentioned in JAVA_HOME.
For example:
If JAVA_HOME=C:\Program Files\Java\jdk1.8.0_211
then the Path should have same Java version's path
Path=C:\Program Files\Java\jdk1.8.0_211
In my case I just changed the Path from
Path=C:\Program Files\Java\jdk1.6.0_45\bin
To
Path=C:\Program Files\Java\jdk1.8.0_211
Remove Eclipse from Non English folder if any.
This is issue might be because of the folder location or the JDK version,
I installed the latest version JDK and with eclipse-inst-win64 provided by eclipse i was able to install and run successfully
Same thing happens when you change eclipse.exe to a different name, seems like org.eclipse.equinox.launcher_1.3.0.v20140415-2008.jar starts the ide and looks for eclipse.exe
In my case, the Eclipse installer downloaded the wrong VM vertion. I download it separately. Choose it in clause "Java 11+ VM" and it works. Also check you do not have Russian letters in eclipse.ini. If you do, then change the encoding to UTF-8 and write the right letters in Russian.
I'm using latest version of Eclipse Luna on Mac OS X 10.9.4. Whenever I try to open the Eclipse it says "version 1.6.0_65 of the JVM is not suitable for this product, version 1.7 or greater is required". I installed java 7 (JRE, I don't need JDK) but still I'm getting the same error. I tried java -version and the output was "java version 1.6.0_65". I can see the java icon on my system preferences. I also restarted my Mac to see if that works but that doesn't help either. I searched on google and some people suggesting other users to change Eclipse.ini file, the instructions wasn't clear and I'm a java beginner so I've no idea where and what to edit. Any step by step instructions will be appreciated.
I had this same problem with a fresh install of Eclipse Mars on OSX. I had installed the JRE from https://java.com/en/download/ (which is the top google search result for "java download" for me.
This failed for me with the same message "version 1.6.0_65 of the JVM is not suitable for this product, version 1.7 or greater is required"
Then I saw a comment that I should get the JRE/JDK from oracle instead:
http://www.oracle.com/technetwork/java/javase/downloads/index.html
After downloading the most recent JDK from Oracle Eclipse starts fine.
A potential solution to your problem might be to uninstall Java6 (provided by Apple itself) and only have Java7 installed in your system. This only applies in case you have no applications that desperately need the old Java6 version to be installed.
To remove the Apple-like Java6 installation open a Terminal and:
sudo rm -rf /System/Library/Java/JavaVirtualMachines/1.6.0.jdk
After this step you should only have Java7 by Oracle installed in your system. To verify, open another terminal and do a:
java -version
It should display something like "java version "1.7.0_XX" where XX is the current update version of the Java7 installation. If not: proceed with the next step.
Redefine the JAVA_HOME variable (to support IDEs like Eclipse and other developer tools...), which helps detecting where the "active" Java installation is situated in your system. Open a terminal and (Note: replace XX first!):
sudo rm /Library/Java/Home
sudo ln -s /Library/Java/JavaVirtualMachines/jdk1.7.0_XX.jdk/Contents/Home /Library/Java/Home
Afterwards, a fresh installation of Eclipse should detect Java7 in your system and should work with this version out of the box. You can modify an installed Eclipse to use this installation by navigating in Eclipse to:
Preferences -> Java -> Installed JREs. Then remove the old Java6 system entry AND add new path (see above) with the name Java7.
You can modify Info.plist inside Eclipse.app (right clic on Eclipse.app --> show package contents) and specify -vm after <key>Eclipse</key>.
For example :
<key>Eclipse</key>
<array>
<string>-vm</string><string>/Library/Java/JavaVirtualMachines/jdk1.8.0_20.jdk/Contents/Home/jre/bin/java</string>
<string>-keyring</string><string>~/.eclipse_keyring</string>
<string>-showlocation</string>
</array>
Ensure you installed the jdk 7 or above. If you have a Mac you most likely have 1.6.0.jdk. To check your java development kit (jdk) version go to the terminal and browse to:
/Library/Java/JavaVirtualMachines
Next, if you see 1.6.0.jdk then you did not install the latest version of the jdk. Go to http://www.oracle.com/technetwork/java/javase/downloads/jdk8-downloads-2133151.html to install the latest jdk. Next use the browse out to the same file path aforementioned and ensure the latest jdk is in there (i.e. jdk1.8.0_141.jdk).
To specify Java 6 for OS X:
-vm
/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
For versions of Mac OS X 10.7+ the location has changed to
/Library/Java/JavaVirtualMachines/<''jdk_name_ver''>/Contents/Home/...
eclipse.ini > Specifying the JVM
Try any of these solutions
How do I run Eclipse using Oracle's new 1.7 JDK for the Mac?
Mountain Lion with Java 7 only
Eclipse still using java 6 as jre on Mac OSX
As I found out, we don't need to un-install an existing Java 1.6. Just installing or deploying a newer version 1.7 or 1.8, and setting the JAVA_HOME, along with the below given activities will solve the issue.
Check your c:/Windows/System32 (as I had this issue in windows). You will find junk java processes (java.exe, javaws.exe etc). Delete them all.
Deleting just java.exe will reflect in your PATH but eclipse still picks the javaws from c:/windows/system32. This is because, usually in PATH, you will have C:/Windows/System32 as the first entry. So, this will override any JAVA_HOME entry in the path.
Try starting the eclipse. It should work like charm! Atleast it did for me.
Try this
https://gist.github.com/johan/10590467
You might have to disable SIP and reenable it.
Okay so I have been struggling with this issue for a few days with Eclipse Neon and Oxygen. I was doing the below steps -
Check java -version from Terminal. It showed version as 1.7
Go to System Preferences -> Java -> Update Java version. Version 1.8 was downloaded and updated.
Went to Terminal again to confirm and this time it showed the version as 1.8.
But it still didn't work!! What was I missing now??
Here is what you need to keep in mind -- By default when you type the below command it shows the JRE version.
java -version
You need JDK to start your Eclipse installation. Please go to Java download page
and download the latest JDK version and you should be good to go.
Don't try to remove the Java in /System/Library/ - firstly this will not be allowed (you need to login as root user) and secondly you don't know the dependencies this Java version has on your other applications. Hope this helps!
Check your system variables ($JAVA_HOME specifically). This may be helpful:
http://www.mkyong.com/java/how-to-set-java_home-environment-variable-on-mac-os-x/
Install the updated JDK
Update the environment variables: here's how
If still not working uninstall the older JDK
I see that you have installed the Java plugin and not the jdk. You can download the JDK from Oracle Downloads section.
You can remove the Java Plugin and install JDK from oracle downloads to resolve your issue.
I have had the same problem as noted above. I could not get Eclipse to install because of Java incompatibilities. The sequence I followed goes like this:
Upgraded to MAC OS Sierra
Downloaded the Eclipse installer but was prompted that I needed to instal a legacy Java.Installed Java 1.6
Was unable to install Eclipse and was prompted that I needed Java 1.7 or greater. Downloaded and installed Java 1.8
Ran the terminal code 'java -version' // this will check your jre version. This showed returned Java 1.6 despite the fact that I had upgraded to 1.8. The Java version listed in the Java control panel said 1.8
Tried multiple downloads of eclipse and Java and multiple restarts always with the same result.
Visited the Oracle web page. I could not find the above reference to 8u73 and 8u74 but I did find and option to download 1.8.0_12. I did this. It installed without difficulty, and then I was able to install Eclipse without difficulty.
On my brand new Windows 7 machine, I downloaded Eclipse (Galileo) and several Eclipse plugins (Android's ADT plugin, Subclipse, etc.)
After rebooting, neither of these plugins are showing up in the IDE (nothing in the preferences, menus, etc.) but if I click "Installation Details" in the 'About Eclipse' popup, I see all of the plugins listed as Installed Software. (ex. Android DDMS 0.9.5, Subclipse 1.6.5, etc.)
How do I get my plugins to work?
I installed the following:
jre-6u21-windows-x64.exe {you have to download it using IE-64bit} (C:\Program Files\Java\jre6)
android-sdk_r06-windows.zip (C:\Program Files\Java\android-sdk-windows)
eclipse-jee-helios-win32-x86_64.zip (C:\Program Files\Eclipse)
First time I tried, I had the same problem as above - no "Android SDK and AVD Manager" in Window menu, and no "Android" item in the Eclipse Window Preferences.
I uninstalled the ADT plugin and closed Eclipse. Then launched Eclipse in Administrator mode. Then I installed ADT, closed and reopened Eclipse as normal, and it worked :D
After mucking around for a while, I realized that when I copied the Eclipse directories to program files, I put them under the 64 bit directory, not the 32 bit (x86).. after moving eclipse to the new directory and reinstalling the plugin, it seems to work. Not sure if this is correlation or causation so maybe someone with more expertise can shed some light on this situation.
Moved the Eclipse to X86 and worked Thanks man that was getting annoying
I was getting this problem too. Installing Eclipse 64 bit into C:\Program Files\ and using a 64 bit JVM. For me the problem turned out to be the UAC (User Access Control). Once I turned this off via the control panel & restarted, I was able to install my plugins correctly.
No idea why Eclipse or Windows didn't prompt me in some way. Now to turn it back on after my plugins have installed.
An eclipse under Program Files (and not Program Files (x86)):
should be a 64-bit eclipse distro ("Windows (x86_64)")
meant to be used with a 64-bit JDK only.
Actually, you cannot download the 64-bit eclipse distro without having a warning specifying you need a 64-bit JVM:
This build requires a 64-bit JVM, and will not run with a 32-bit JVM.
You can, for example, use the Sun 64-bit 1.5 JVM for AMD64.
Note that the Sun 1.4.2 JVM for AMD64 is 32-bit and therefore cannot be used to run this build.
So: are you sure you have a 64-bit eclipse?
and what java -version returns? (Java HotSpot(TM) 64-Bit Server VM?)
First check the Window -> Preferences -> Android exists or not.
If exists, just point the SDK Location to your android sdk location.
If something missing, just Window -> Android SDK And AVD Manager to download all the sdk you needed.
p.s. Just download the new 64bit jdk from sun, file named jdk-6u17-windows-x64.exe.
C:\Program Files\eclipse -> right click -> Properties -> Security -> Edit -> Add... -> your username -> Full Control -> Apply
While running Eclipse as administrator does work, I found that doing the above to give yourself and normal Eclipse full write access to the folder is far better since you only have to do it once.
I had the same problem and resolved it installing Eclipse in an own, user-defined directory, but NOT inside any of those system-managed "C:\Program Files"-directories.