Related
This is intended to be a general-purpose question to assist new programmers who have a problem with a program, but who do not know how to use a debugger to diagnose the cause of the problem.
This question covers three classes of more specific question:
When I run my program, it does not produce the output I expect for the input I gave it.
When I run my program, it crashes and gives me a stack trace. I have examined the stack trace, but I still do not know the cause of the problem because the stack trace does not provide me with enough information.
When I run my program, it crashes because of a segmentation fault (SEGV).
A debugger is a program that can examine the state of your program while your program is running. The technical means it uses for doing this are not necessary for understanding the basics of using a debugger. You can use a debugger to halt the execution of your program when it reaches a particular place in your code, and then examine the values of the variables in the program. You can use a debugger to run your program very slowly, one line of code at a time (called single stepping), while you examine the values of its variables.
Using a debugger is an expected basic skill
A debugger is a very powerful tool for helping diagnose problems with programs. And debuggers are available for all practical programming languages. Therefore, being able to use a debugger is considered a basic skill of any professional or enthusiast programmer. And using a debugger yourself is considered basic work you should do yourself before asking others for help. As this site is for professional and enthusiast programmers, and not a help desk or mentoring site, if you have a question about a problem with a specific program, but have not used a debugger, your question is very likely to be closed and downvoted. If you persist with questions like that, you will eventually be blocked from posting more.
How a debugger can help you
By using a debugger you can discover whether a variable has the wrong value, and where in your program its value changed to the wrong value.
Using single stepping you can also discover whether the control flow is as you expect. For example, whether an if branch executed when you expect it ought to be.
General notes on using a debugger
The specifics of using a debugger depend on the debugger and, to a lesser degree, the programming language you are using.
You can attach a debugger to a process already running your program. You might do it if your program is stuck.
In practice it is often easier to run your program under the control of a debugger from the very start.
You indicate where your program should stop executing by indicating the source code file and line number of the line at which execution should stop, or by indicating the name of the method/function at which the program should stop (if you want to stop as soon as execution enters the method). The technical means that the debugger uses to cause your program to stop is called a breakpoint and this process is called setting a breakpoint.
Most modern debuggers are part of an IDE and provide you with a convenient GUI for examining the source code and variables of your program, with a point-and-click interface for setting breakpoints, running your program, and single stepping it.
Using a debugger can be very difficult unless your program executable or bytecode files include debugging symbol information and cross-references to your source code. You might have to compile (or recompile) your program slightly differently to ensure that information is present. If the compiler performs extensive optimizations, those cross-references can become confusing. You might therefore have to recompile your program with optimizations turned off.
I want to add that a debugger isn't always the perfect solution, and shouldn't always be the go-to solution to debugging. Here are a few cases where a debugger might not work for you:
The part of your program which fails is really large (poor modularization, perhaps?) and you're not exactly sure where to start stepping through the code. Stepping through all of it might be too time-consuming.
Your program uses a lot of callbacks and other non-linear flow control methods, which makes the debugger confused when you step through it.
Your program is multi-threaded. Or even worse, your problem is caused by a race condition.
The code that has the bug in it runs many times before it bugs out. This can be particularly problematic in main loops, or worse yet, in physics engines, where the problem could be numerical. Even setting a breakpoint, in this case, would simply have you hitting it many times, with the bug not appearing.
Your program must run in real-time. This is a big issue for programs that connect to the network. If you set up a breakpoint in your network code, the other end isn't going to wait for you to step through, it's simply going to time out. Programs that rely on the system clock, e.g. games with frameskip, aren't much better off either.
Your program performs some form of destructive actions, like writing to files or sending e-mails, and you'd like to limit the number of times you need to run through it.
You can tell that your bug is caused by incorrect values arriving at function X, but you don't know where these values come from. Having to run through the program, again and again, setting breakpoints farther and farther back, can be a huge hassle. Especially if function X is called from many places throughout the program.
In all of these cases, either having your program stop abruptly could cause the end results to differ, or stepping through manually in search of the one line where the bug is caused is too much of a hassle. This can equally happen whether your bug is incorrect behavior, or a crash. For instance, if memory corruption causes a crash, by the time the crash happens, it's too far from where the memory corruption first occurred, and no useful information is left.
So, what are the alternatives?
Simplest is simply logging and assertions. Add logs to your program at various points, and compare what you get with what you're expecting. For instance, see if the function where you think there's a bug is even called in the first place. See if the variables at the start of a method are what you think they are. Unlike breakpoints, it's okay for there to be many log lines in which nothing special happens. You can simply search through the log afterward. Once you hit a log line that's different from what you're expecting, add more in the same area. Narrow it down farther and farther, until it's small enough to be able to log every line in the bugged area.
Assertions can be used to trap incorrect values as they occur, rather than once they have an effect visible to the end-user. The quicker you catch an incorrect value, the closer you are to the line that produced it.
Refactor and unit test. If your program is too big, it might be worthwhile to test it one class or one function at a time. Give it inputs, and look at the outputs, and see which are not as you're expecting. Being able to narrow down a bug from an entire program to a single function can make a huge difference in debugging time.
In case of memory leaks or memory stomping, use appropriate tools that are able to analyze and detect these at runtime. Being able to detect where the actual corruption occurs is the first step. After this, you can use logs to work your way back to where incorrect values were introduced.
Remember that debugging is a process going backward. You have the end result - a bug - and find the cause, which preceded it. It's about working your way backward and, unfortunately, debuggers only step forwards. This is where good logging and postmortem analysis can give you much better results.
This is intended to be a general-purpose question to assist new programmers who have a problem with a program, but who do not know how to use a debugger to diagnose the cause of the problem.
This question covers three classes of more specific question:
When I run my program, it does not produce the output I expect for the input I gave it.
When I run my program, it crashes and gives me a stack trace. I have examined the stack trace, but I still do not know the cause of the problem because the stack trace does not provide me with enough information.
When I run my program, it crashes because of a segmentation fault (SEGV).
A debugger is a program that can examine the state of your program while your program is running. The technical means it uses for doing this are not necessary for understanding the basics of using a debugger. You can use a debugger to halt the execution of your program when it reaches a particular place in your code, and then examine the values of the variables in the program. You can use a debugger to run your program very slowly, one line of code at a time (called single stepping), while you examine the values of its variables.
Using a debugger is an expected basic skill
A debugger is a very powerful tool for helping diagnose problems with programs. And debuggers are available for all practical programming languages. Therefore, being able to use a debugger is considered a basic skill of any professional or enthusiast programmer. And using a debugger yourself is considered basic work you should do yourself before asking others for help. As this site is for professional and enthusiast programmers, and not a help desk or mentoring site, if you have a question about a problem with a specific program, but have not used a debugger, your question is very likely to be closed and downvoted. If you persist with questions like that, you will eventually be blocked from posting more.
How a debugger can help you
By using a debugger you can discover whether a variable has the wrong value, and where in your program its value changed to the wrong value.
Using single stepping you can also discover whether the control flow is as you expect. For example, whether an if branch executed when you expect it ought to be.
General notes on using a debugger
The specifics of using a debugger depend on the debugger and, to a lesser degree, the programming language you are using.
You can attach a debugger to a process already running your program. You might do it if your program is stuck.
In practice it is often easier to run your program under the control of a debugger from the very start.
You indicate where your program should stop executing by indicating the source code file and line number of the line at which execution should stop, or by indicating the name of the method/function at which the program should stop (if you want to stop as soon as execution enters the method). The technical means that the debugger uses to cause your program to stop is called a breakpoint and this process is called setting a breakpoint.
Most modern debuggers are part of an IDE and provide you with a convenient GUI for examining the source code and variables of your program, with a point-and-click interface for setting breakpoints, running your program, and single stepping it.
Using a debugger can be very difficult unless your program executable or bytecode files include debugging symbol information and cross-references to your source code. You might have to compile (or recompile) your program slightly differently to ensure that information is present. If the compiler performs extensive optimizations, those cross-references can become confusing. You might therefore have to recompile your program with optimizations turned off.
I want to add that a debugger isn't always the perfect solution, and shouldn't always be the go-to solution to debugging. Here are a few cases where a debugger might not work for you:
The part of your program which fails is really large (poor modularization, perhaps?) and you're not exactly sure where to start stepping through the code. Stepping through all of it might be too time-consuming.
Your program uses a lot of callbacks and other non-linear flow control methods, which makes the debugger confused when you step through it.
Your program is multi-threaded. Or even worse, your problem is caused by a race condition.
The code that has the bug in it runs many times before it bugs out. This can be particularly problematic in main loops, or worse yet, in physics engines, where the problem could be numerical. Even setting a breakpoint, in this case, would simply have you hitting it many times, with the bug not appearing.
Your program must run in real-time. This is a big issue for programs that connect to the network. If you set up a breakpoint in your network code, the other end isn't going to wait for you to step through, it's simply going to time out. Programs that rely on the system clock, e.g. games with frameskip, aren't much better off either.
Your program performs some form of destructive actions, like writing to files or sending e-mails, and you'd like to limit the number of times you need to run through it.
You can tell that your bug is caused by incorrect values arriving at function X, but you don't know where these values come from. Having to run through the program, again and again, setting breakpoints farther and farther back, can be a huge hassle. Especially if function X is called from many places throughout the program.
In all of these cases, either having your program stop abruptly could cause the end results to differ, or stepping through manually in search of the one line where the bug is caused is too much of a hassle. This can equally happen whether your bug is incorrect behavior, or a crash. For instance, if memory corruption causes a crash, by the time the crash happens, it's too far from where the memory corruption first occurred, and no useful information is left.
So, what are the alternatives?
Simplest is simply logging and assertions. Add logs to your program at various points, and compare what you get with what you're expecting. For instance, see if the function where you think there's a bug is even called in the first place. See if the variables at the start of a method are what you think they are. Unlike breakpoints, it's okay for there to be many log lines in which nothing special happens. You can simply search through the log afterward. Once you hit a log line that's different from what you're expecting, add more in the same area. Narrow it down farther and farther, until it's small enough to be able to log every line in the bugged area.
Assertions can be used to trap incorrect values as they occur, rather than once they have an effect visible to the end-user. The quicker you catch an incorrect value, the closer you are to the line that produced it.
Refactor and unit test. If your program is too big, it might be worthwhile to test it one class or one function at a time. Give it inputs, and look at the outputs, and see which are not as you're expecting. Being able to narrow down a bug from an entire program to a single function can make a huge difference in debugging time.
In case of memory leaks or memory stomping, use appropriate tools that are able to analyze and detect these at runtime. Being able to detect where the actual corruption occurs is the first step. After this, you can use logs to work your way back to where incorrect values were introduced.
Remember that debugging is a process going backward. You have the end result - a bug - and find the cause, which preceded it. It's about working your way backward and, unfortunately, debuggers only step forwards. This is where good logging and postmortem analysis can give you much better results.
This is intended to be a general-purpose question to assist new programmers who have a problem with a program, but who do not know how to use a debugger to diagnose the cause of the problem.
This question covers three classes of more specific question:
When I run my program, it does not produce the output I expect for the input I gave it.
When I run my program, it crashes and gives me a stack trace. I have examined the stack trace, but I still do not know the cause of the problem because the stack trace does not provide me with enough information.
When I run my program, it crashes because of a segmentation fault (SEGV).
A debugger is a program that can examine the state of your program while your program is running. The technical means it uses for doing this are not necessary for understanding the basics of using a debugger. You can use a debugger to halt the execution of your program when it reaches a particular place in your code, and then examine the values of the variables in the program. You can use a debugger to run your program very slowly, one line of code at a time (called single stepping), while you examine the values of its variables.
Using a debugger is an expected basic skill
A debugger is a very powerful tool for helping diagnose problems with programs. And debuggers are available for all practical programming languages. Therefore, being able to use a debugger is considered a basic skill of any professional or enthusiast programmer. And using a debugger yourself is considered basic work you should do yourself before asking others for help. As this site is for professional and enthusiast programmers, and not a help desk or mentoring site, if you have a question about a problem with a specific program, but have not used a debugger, your question is very likely to be closed and downvoted. If you persist with questions like that, you will eventually be blocked from posting more.
How a debugger can help you
By using a debugger you can discover whether a variable has the wrong value, and where in your program its value changed to the wrong value.
Using single stepping you can also discover whether the control flow is as you expect. For example, whether an if branch executed when you expect it ought to be.
General notes on using a debugger
The specifics of using a debugger depend on the debugger and, to a lesser degree, the programming language you are using.
You can attach a debugger to a process already running your program. You might do it if your program is stuck.
In practice it is often easier to run your program under the control of a debugger from the very start.
You indicate where your program should stop executing by indicating the source code file and line number of the line at which execution should stop, or by indicating the name of the method/function at which the program should stop (if you want to stop as soon as execution enters the method). The technical means that the debugger uses to cause your program to stop is called a breakpoint and this process is called setting a breakpoint.
Most modern debuggers are part of an IDE and provide you with a convenient GUI for examining the source code and variables of your program, with a point-and-click interface for setting breakpoints, running your program, and single stepping it.
Using a debugger can be very difficult unless your program executable or bytecode files include debugging symbol information and cross-references to your source code. You might have to compile (or recompile) your program slightly differently to ensure that information is present. If the compiler performs extensive optimizations, those cross-references can become confusing. You might therefore have to recompile your program with optimizations turned off.
I want to add that a debugger isn't always the perfect solution, and shouldn't always be the go-to solution to debugging. Here are a few cases where a debugger might not work for you:
The part of your program which fails is really large (poor modularization, perhaps?) and you're not exactly sure where to start stepping through the code. Stepping through all of it might be too time-consuming.
Your program uses a lot of callbacks and other non-linear flow control methods, which makes the debugger confused when you step through it.
Your program is multi-threaded. Or even worse, your problem is caused by a race condition.
The code that has the bug in it runs many times before it bugs out. This can be particularly problematic in main loops, or worse yet, in physics engines, where the problem could be numerical. Even setting a breakpoint, in this case, would simply have you hitting it many times, with the bug not appearing.
Your program must run in real-time. This is a big issue for programs that connect to the network. If you set up a breakpoint in your network code, the other end isn't going to wait for you to step through, it's simply going to time out. Programs that rely on the system clock, e.g. games with frameskip, aren't much better off either.
Your program performs some form of destructive actions, like writing to files or sending e-mails, and you'd like to limit the number of times you need to run through it.
You can tell that your bug is caused by incorrect values arriving at function X, but you don't know where these values come from. Having to run through the program, again and again, setting breakpoints farther and farther back, can be a huge hassle. Especially if function X is called from many places throughout the program.
In all of these cases, either having your program stop abruptly could cause the end results to differ, or stepping through manually in search of the one line where the bug is caused is too much of a hassle. This can equally happen whether your bug is incorrect behavior, or a crash. For instance, if memory corruption causes a crash, by the time the crash happens, it's too far from where the memory corruption first occurred, and no useful information is left.
So, what are the alternatives?
Simplest is simply logging and assertions. Add logs to your program at various points, and compare what you get with what you're expecting. For instance, see if the function where you think there's a bug is even called in the first place. See if the variables at the start of a method are what you think they are. Unlike breakpoints, it's okay for there to be many log lines in which nothing special happens. You can simply search through the log afterward. Once you hit a log line that's different from what you're expecting, add more in the same area. Narrow it down farther and farther, until it's small enough to be able to log every line in the bugged area.
Assertions can be used to trap incorrect values as they occur, rather than once they have an effect visible to the end-user. The quicker you catch an incorrect value, the closer you are to the line that produced it.
Refactor and unit test. If your program is too big, it might be worthwhile to test it one class or one function at a time. Give it inputs, and look at the outputs, and see which are not as you're expecting. Being able to narrow down a bug from an entire program to a single function can make a huge difference in debugging time.
In case of memory leaks or memory stomping, use appropriate tools that are able to analyze and detect these at runtime. Being able to detect where the actual corruption occurs is the first step. After this, you can use logs to work your way back to where incorrect values were introduced.
Remember that debugging is a process going backward. You have the end result - a bug - and find the cause, which preceded it. It's about working your way backward and, unfortunately, debuggers only step forwards. This is where good logging and postmortem analysis can give you much better results.
This is intended to be a general-purpose question to assist new programmers who have a problem with a program, but who do not know how to use a debugger to diagnose the cause of the problem.
This question covers three classes of more specific question:
When I run my program, it does not produce the output I expect for the input I gave it.
When I run my program, it crashes and gives me a stack trace. I have examined the stack trace, but I still do not know the cause of the problem because the stack trace does not provide me with enough information.
When I run my program, it crashes because of a segmentation fault (SEGV).
A debugger is a program that can examine the state of your program while your program is running. The technical means it uses for doing this are not necessary for understanding the basics of using a debugger. You can use a debugger to halt the execution of your program when it reaches a particular place in your code, and then examine the values of the variables in the program. You can use a debugger to run your program very slowly, one line of code at a time (called single stepping), while you examine the values of its variables.
Using a debugger is an expected basic skill
A debugger is a very powerful tool for helping diagnose problems with programs. And debuggers are available for all practical programming languages. Therefore, being able to use a debugger is considered a basic skill of any professional or enthusiast programmer. And using a debugger yourself is considered basic work you should do yourself before asking others for help. As this site is for professional and enthusiast programmers, and not a help desk or mentoring site, if you have a question about a problem with a specific program, but have not used a debugger, your question is very likely to be closed and downvoted. If you persist with questions like that, you will eventually be blocked from posting more.
How a debugger can help you
By using a debugger you can discover whether a variable has the wrong value, and where in your program its value changed to the wrong value.
Using single stepping you can also discover whether the control flow is as you expect. For example, whether an if branch executed when you expect it ought to be.
General notes on using a debugger
The specifics of using a debugger depend on the debugger and, to a lesser degree, the programming language you are using.
You can attach a debugger to a process already running your program. You might do it if your program is stuck.
In practice it is often easier to run your program under the control of a debugger from the very start.
You indicate where your program should stop executing by indicating the source code file and line number of the line at which execution should stop, or by indicating the name of the method/function at which the program should stop (if you want to stop as soon as execution enters the method). The technical means that the debugger uses to cause your program to stop is called a breakpoint and this process is called setting a breakpoint.
Most modern debuggers are part of an IDE and provide you with a convenient GUI for examining the source code and variables of your program, with a point-and-click interface for setting breakpoints, running your program, and single stepping it.
Using a debugger can be very difficult unless your program executable or bytecode files include debugging symbol information and cross-references to your source code. You might have to compile (or recompile) your program slightly differently to ensure that information is present. If the compiler performs extensive optimizations, those cross-references can become confusing. You might therefore have to recompile your program with optimizations turned off.
I want to add that a debugger isn't always the perfect solution, and shouldn't always be the go-to solution to debugging. Here are a few cases where a debugger might not work for you:
The part of your program which fails is really large (poor modularization, perhaps?) and you're not exactly sure where to start stepping through the code. Stepping through all of it might be too time-consuming.
Your program uses a lot of callbacks and other non-linear flow control methods, which makes the debugger confused when you step through it.
Your program is multi-threaded. Or even worse, your problem is caused by a race condition.
The code that has the bug in it runs many times before it bugs out. This can be particularly problematic in main loops, or worse yet, in physics engines, where the problem could be numerical. Even setting a breakpoint, in this case, would simply have you hitting it many times, with the bug not appearing.
Your program must run in real-time. This is a big issue for programs that connect to the network. If you set up a breakpoint in your network code, the other end isn't going to wait for you to step through, it's simply going to time out. Programs that rely on the system clock, e.g. games with frameskip, aren't much better off either.
Your program performs some form of destructive actions, like writing to files or sending e-mails, and you'd like to limit the number of times you need to run through it.
You can tell that your bug is caused by incorrect values arriving at function X, but you don't know where these values come from. Having to run through the program, again and again, setting breakpoints farther and farther back, can be a huge hassle. Especially if function X is called from many places throughout the program.
In all of these cases, either having your program stop abruptly could cause the end results to differ, or stepping through manually in search of the one line where the bug is caused is too much of a hassle. This can equally happen whether your bug is incorrect behavior, or a crash. For instance, if memory corruption causes a crash, by the time the crash happens, it's too far from where the memory corruption first occurred, and no useful information is left.
So, what are the alternatives?
Simplest is simply logging and assertions. Add logs to your program at various points, and compare what you get with what you're expecting. For instance, see if the function where you think there's a bug is even called in the first place. See if the variables at the start of a method are what you think they are. Unlike breakpoints, it's okay for there to be many log lines in which nothing special happens. You can simply search through the log afterward. Once you hit a log line that's different from what you're expecting, add more in the same area. Narrow it down farther and farther, until it's small enough to be able to log every line in the bugged area.
Assertions can be used to trap incorrect values as they occur, rather than once they have an effect visible to the end-user. The quicker you catch an incorrect value, the closer you are to the line that produced it.
Refactor and unit test. If your program is too big, it might be worthwhile to test it one class or one function at a time. Give it inputs, and look at the outputs, and see which are not as you're expecting. Being able to narrow down a bug from an entire program to a single function can make a huge difference in debugging time.
In case of memory leaks or memory stomping, use appropriate tools that are able to analyze and detect these at runtime. Being able to detect where the actual corruption occurs is the first step. After this, you can use logs to work your way back to where incorrect values were introduced.
Remember that debugging is a process going backward. You have the end result - a bug - and find the cause, which preceded it. It's about working your way backward and, unfortunately, debuggers only step forwards. This is where good logging and postmortem analysis can give you much better results.
While doing some homework that works with some swing gui components, my program started crashing seemingly at random. That is, it starts, runs for a short time, and then crashes. I don't get any errors in the console, it's just a straight up crash.
I don't doubt that it is something I wrote, and I'm more than happy to show code if anyone wants to look at it, but is there anything that I can do myself to track down what might be the cause of my crashes?
Some other information that might be useful:
I'm using eclipse, and the debugger doesn't seem to do anything that helps me with this (program still crashes).
I didn't notice any issues like this until I started to add event handling.
I'm using Windows 10.
Occasionally, nothing is drawn in the window I create. Exiting and then running the program again will cause it to work.
Some possible heuristics:
Crashes that occur seemingly at random suggest incorrect synchronization; look for event dispatch thread violation using one of the approaches cited here.
Verify that all exception handlers produce diagnostic output; run from the command line to ensure that diagnostic output has not been inadvertently redirected.
Try running under the aegis of a different debugger, e.g. NetBeans.
Try running under the aegis of a profiler.
Try a different version of the JDK/JRE.
Try a different host OS.