I am a newbie in Java, and I am trying to develop a web application.
I have Windows 7 32 bit. I have installed Java 7 and set the path and classpath as well. After that I installed Tomcat 7.
When I try to open tomcat home page using URL localhost:8080, it does not open and Tomcat stops automatically.
Please help me.
Make sure no other application using port 8080 before starting tomcat. If that's not the problem please paste tomcat log.
If you want to change tomcat's default port, go to tomcat folder and open conf folder, in which you can see server.xml. In that file you can see something like <Connector port= . Change the port value and start tomcat.
If you started tomcat through eclipse, It can be solved in different ways too.
Method 1:
Right click on server --> Properties
click on Switch location and apply.
Method2:
Double click in the server in eclipse.
Change Server location to Use tomcat installation(takes control of tomcat installation).
Your issue is not with port 8080, but with port 8005. Port 8005 is the shutdown port for Tomcat.
Rather than trying to figure out what is using port 8005, it may just be easier to edit TOMCAT_DIR/conf/server.xml and change the shutdown port to 8006
<Server port="8006" shutdown="SHUTDOWN">
For *Unix based systems, you can check the ports used by a particular application by issueing the following command in the terminal
[~/.]$ netstat -tuplen
You will get the list of all the ports that are being currently held and used by their respective process ID's
For windows user, type netstat -anin command prompt to see ports that are listening, this may come handy.
1) Using Terminal (On Linux), go to the apache-tomcat-directory/bin folder.
2) Type ./catalina.sh start
3) To stop Tomcat, type ./catalina.sh stop from the bin folder. For some reason ./startup.sh doesn't work sometimes.
For mac users
First Try : go to activity monitor -> search for java and kill the instance then restart the server and try.
Second Try:
Check log file for any errors under tomcat logs folder.
Use below command to check tomcat logs in terminal
tail -f {tomcatpath}/logs/catalina.out
Third Try:
Check if node or other apps using the same port. Use below command to check which app listening to a specific port. You will see list of apps with pid in second column.
lsof -i :8080 | grep LISTEN
Kill the process using below command
sudo kill -9 pid
If you are using eclipse to start the server then check for the server location being used and the deployment path:
In my case changing this to Tomcat installation instead of workspace metadata worked for me.
My issue has solved.I was getting log as below.
SEVERE: StandardServer.await: create[localhost:8005]:
java.net.BindException: Cannot assign requested address: JVM_Bind
My tomcat server was automatically stopping when I tried to open tomcat homepage with
URL.
So I just made some changes in windows->System32->drivers->etc->host file.
keep only 127.0.0.1 localhost and remove all other. your problem will be solved.
Thank you guys for your help :D
If you have your tomcat started (in linux check with ps -ef | grep java) and you see it opened the port 8080 or the one you configured in server.xml (check with netstat --tcp -na | grep <port number>) but you still cannot access it in your browser check the following:
It may start but with a delay of 3-5 minutes. Check the logs/catalina.out. You should see something like this when the server started completely.
INFO [main] org.apache.catalina.startup.Catalina.start Server startup in 38442 msIf you don't have this INFO line your server startup is not complete yet. The problem may occur due to the SecureRandom class responsible to provide random Session IDs and which can cause big delays during startup.
Check more details and the solution here.
Check your firewall (on linux iptables -L -n): You can try to reset your firewall completely iptables -F if you are not into an exposed environment. However, pay attention, that leaves you without protection therefore it can be dangerous.
Check your selinux (if you are on linux).
These are some of the most forgotten and not obvious issues in having your Apache Tomcat up and running.
I am using Eclipse Java EE IDE for Web Developers. Version: Oxygen.1a Release (4.7.1a) in Windows 8.1 x64 with Apache Tomcat 8.5.24 (for testing purpose).
Port Name & Numbers for my Tomcat Server are :
Tomcat admin port : 8005
HTTP/1.1 : 8081 (my Tomcat Listening Port Number)
AJP/1.3 : 8009
Peoples, for those the Tomcat were running good earlier, and sometimes sudden after stopping tomcat server explicitly by pressing the below shown image button or may be other reasons.
Either they continuously failed to start/restart the tomcat with below said error:
Server Tomcat vX.Y Server at localhost failed to start.
or sometimes the Tomcat Server is started but instead of showing Tomcat Homepage in web browser, it is throwing client exception HTTP Status 404 – Not Found. in preferred web browser.
possibly, there are many reasons i.e. wrong Host name defined, Wrong Tomcat Server Locations defined in eclipse, project JDK/JRE version mismatch with Tomcat JRE dependent version, maven project version mismatch due to maven.compiler.source and maven.compiler.target version not defined under properties tag, mismatch version of project facet Dynamic Web Module to 2.5/3.0, Sometimes Tomcat Server is running on Windows Services level, previous stopped Tomcat port number were still listening and the processing pid were not killed in Tomcat defined timespan Timeouts Stop (in seconds): 15(by default) in eclipse and pid still running, failed to start in defined Start (in seconds): XX, etc.
Here I will give the resolution on, how to check and kill the running existing Tomcat port number's processing pid(beware, you must be aware with after effects).
In Windows, open you command prompt, and follow steps(my tomcat HTTP port is 8081):
netstat -ano | findstr :8081
TCP 0.0.0.0:8081 0.0.0.0:0 LISTENING 2284
TCP [::]:8081 [::]:0 LISTENING 2284
if any listening is being there, above command will list details of port listening along with processing pid at last of the line(here pid is 2284).
now kill the running pid like:
taskkill /PID 2284 /F
SUCCESS: The process with PID 2284 has been terminated.
also illustrated the above two steps like following:
Now, after resolving above illustrated reason, start the Tomcat Server.
I had the same issue. My tomcat was started but I was getting HTTP 404 page not found.However, in my situation, I installed tree instances of tomcat. Each instance contains conf, temp, work, webapps and logs folders. Unless I forgot, to copy the global web.xml under conf folder of each tomcat.
e.g: /opt/tomcat/mytomcatInstance/conf/web.xml
The web.xml Deployment Descriptor file describes how to deploy a web application in a servlet container.
So even if my tomcat was up, my web apps could not be deployed properly.
The problems may happen because of memory issue.
java.lang.OutOfMemoryError: Java heap space
please verify the logfile, any issues related to hardware(memory).
Look in TomcatDirectory/logs/catalina.out for the logs. If the logs are too long, delete the catalina.out file and rerun the app.
In my case, the port that tomcat was running on was defined in an application.properties file for 8000, not 8080. In my case, it looked like the same problem described here. Just leaving this here in case anyone has a similar setup and issue! :)
I am trying to run a Java webapp build instance but it stops in the middle of the build with this error:
java.net.BindException: Address already in use:8080
It's obviously trying to bind to the 8080 port but another process has already done so and wont share.
So, I checked to see what process is using the 8080 (netstat -anp | grep 8080). Apparently the jsvc.exec process is listening to my 8080 port. Upon checking (ps -fp) I find out that this is Tomcat (boostrap.jar).
So, to see if the build would at least complete, I killed the process. And yeah!! The Webapp build installed completely. But when I navigated my browser to localhost:8080 it says the service is not running - coz I killed Tomcat! I even tried localhost:8080/manager/list. Still said service not running.
So I restart Tomcat, checked localhost:8080 and Tomcat was back up. Checked localhost:8080/manager/list but did not see the Webapp instance I had just built.
What I am not getting here! My webapp wont build if I run tomcat (cant share 8080). And If i kill tomcat to complete the build, the webapp obviously cant run coz Tomcat is dead.
Please help me. Running Tomcat 5.5 in a LAMP environment on a remote server. NOTE: I am running a pre-built webapp build application (war) which I cant make changes to.
During a build? A build process usually doesn't require a port to be open. The issue is that two programs are attempting to use the same port. Without fixing the underlying issue, the immediate fix is to change the port Tomcat is running on. To change the port Tomcat runs on, edit install_dir/conf/server.xml and change the port attribute of the Connector element from 8080 to 8081.
If this is your first time running Confluence or you have recently added applications or made changes to the system, investigate what's running on port 8080.
If Confluence was not shut down properly, you can restart the machine or kill the process:
On Windows:
Hit Ctrl-alt-delete and look at open programs. Look for {{java.exe}}.
From a command window, run {{netstat -an}}. Check which ports are in use. You can identify which application is running this way, then close it from the Task Manager.
I am new in java programming. I have write a small web program using struts. I ve already install apche tomcat 7 server. I configure this server to my project. Tomcat server error showing When I run this program. The error is
Starting tomcat v7.0 server at localhost encountered a problem
Several ports (8086, 8009) required by Tomcat v7.0 Server at localhost are already in use. The server may already be running in another process, or a system process may be using the port. To start this server you will need to stop the other process or change the port number(s)
You need to find out which process are running over that port and if it is not needed you can kill them
or you can change your tomcat's configuration to start the Tomcat instance on another port
for this you need to edit your server.xml file located at TOMCAT_DIR/conf/
how to solve this Port 8080 required by Tomcat v7.0 Server at localhost is already in use. The server may already be running in another process, or a system process may be using the port. To start this server you will need to stop the other process or change the port number(s).
You can change your tomcat ports
you can change the port details in {TOMCAT_HOME}\conf\server.xml
You've another instance of Server already running. You can confirm this by going to http://localhost:8080 in your webbrowser and check if you get the specific 404 error page and Tomcat default home page. Both are equally valid evidence that Tomcat runs fine.
You need to shutdown it.
Open the task manager and kill all java and/or javaw processes.
Now open your project and run your application.
Open Window -> Preferences -> Server
If Tomcat is not installed go through these steps otherwise skip step
In “Servers” area, right click -> New -> Server.
You will find Tomcat vx.x Server under “Apache” folder as shown
below.
Select “Tomcat v6.0 Server” and click Next.
Select the Tomcat Root folder which has bin folder and click Next.
There are no resources to be configured and hence click Finish.
The configured Apache Tomcat Server will be displayed in the
“Servers” view.
If Tomcat is already installed then go through these steps:
In "Server" area, right click -> Add and Remove...
Under this, the project need to be configured add the project from
"Available:" box to "Configured:"
Click finish to run the server.
I have started a jetty server in my remote server. But I got problem accessing the default page. I followed the getting started steps and used the command java -jar start.jar to start the server. The port is set to 8080. When I use my Ip http://20.14.228.123:8080/ The site is never found. Do you guys have any clue of what I have done wrong? According to my terminal window it is running.
UPDATE:
sorry I ran wget localhost:8080 and connection failed it says. But I can go in to the default page though. I'm newbie in Java apps deployment, but I exported a war file on my computer and placed it under webapps in the jetty folder is that right procedure? because it don't runs. According to my web.xml in my webapp a servlet is mapped through /Push/GetContacts and when I enter the destination(http://localhost:8080/Push/GetContacts) in my web browser it don't show up?
FINAL:
Never mind I fixed it!
Can you try to run wget localhost:8080 from you server terminal? Just to check that port\ip not blocked somewhere on network layer? It must download html showed by jetty if it actually run...
Q: how do I get the jetty server to not shut down all the time after I close down the terminal?
A: start Jetty as service(process)
whats the cause of this error while running tomcat 6.0 on eclipse ide helious:
Several ports (8005, 8080, 8009) required by Tomcat v6.0 Server at localhost are already in use. The server may already be running in another process, or a system process may be using the port. To start this server you will need to stop the other process or change the port number(s).
Just read the error message: Tomcat is already running.
Or:
you have tomcat running in your eclipse workspace (solution: stop the server in eclipse or the eclipse process from your task manager)
your tomcat is running in the background as a service (solution: kill the tomcat process from your task manager and disable the windows service)
the ports tomcat use are used by other programs running in the background (solution: kill the processes using these ports from your task manager)
Some application is using the ports configured in Tomcat.
Either check the applications using these ports with netstat and kill them, or configure different ports for Tomcat.
Check if there's any Java Application Server running, they generally use these ports.
Sometimes when you run Tomcat from within Eclipse, you stop Tomcat from the Servers view, and it keeps running on the background. I've found that restarting Eclipse makes it stop for good.
The problem is that the tomcat server must not start from inside the Eclipse, it should start from the cmd screen by using the files startup.dat and shutdown by using the shutdown.dat file using their pathin the cmd like this:
D:\Apache-Software-Foundation\Tomcat-8.0\bin\startup.bat
D:\Apache-Software-Foundation\Tomcat-8.0\bin\shutdown.bat