I am trying to run my java program TopicPublisher.java via command line. There are several dependencies specified through Maven.
In the directory with the pom.xml file, I ran the following commands: mvn clean, mvn package, and java -cp target/SOM_Enrichment-1.0-SNAPSHOT.jar TopicPublisher.
I get the following error:
Error: A JNI error has occurred, please check your installation and try again
Exception in thread "main" java.lang.NoClassDefFoundError: om/solacesystems/jcsmp/JCSMPStreamingPublishEventHandler
Below is a screenshot of my directory tree:
Any ideas how to solve this?
[EDIT]
Pom File:
<?xml version="1.0" encoding="UTF-8"?>
http://maven.apache.org/xsd/maven-4.0.0.xsd">
4.0.0
<groupId>CAMM</groupId>
<artifactId>SOM_Enrichment</artifactId>
<version>1.0-SNAPSHOT</version>
<build>
<plugins>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<version>3.1.0</version>
<configuration>
<descriptorRefs>
<descriptorRef>jar-with-dependencies</descriptorRef>
</descriptorRefs>
</configuration>
<executions>
<execution>
<id>make-assembly</id> <!-- this is used for inheritance merges -->
<phase>package</phase> <!-- bind to the packaging phase -->
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>com.solacesystems</groupId>
<artifactId>sol-jcsmp</artifactId>
<version>[10,)</version>
</dependency>
</dependencies>
Your program loads classes from the com.solacesystems dependency in your pom.xml, but your classpath only contains your build artifact jar. Build a fat jar, as #Kerry suggests, or use the exec-maven-plugin to run from the command line. From within your project directory (where you execute mvn package), execute:
mvn exec:java -Dexec.mainClass=TopicPublisher
The plugin builds the classpath argument from the dependencies defined in your pom. See https://www.mojohaus.org/exec-maven-plugin/ for more options.
Without seeing your full POM.xml I am assuming you have not build the final artifact to be a 'fat jar'. By this I mean that the JAR not only contains your own classes but all the third party dependencies.
You would need to use something like the Maven assembly plugin or the Maven shade pluginto do this for you. From the screenshot though I see you are using IntelliJ so you should also be able to run through your IDE obviously for just testing purposes.
I have a multi-module Maven project. The project is laid out as follows
project/
pom.xml
types/
pom.xml
client/
pom.xml
service/
pom.xml
The types and client modules are built as JARs, service is built as a WAR. I'm using the maven-release-plugin to create new releases of this project. I would like to have the release plugin invoke extra goals when performing the release of the service module.
The release plugin is configured like so in the root pom (nothing special):
<plugin>
<artifactId>maven-release-plugin</artifactId>
<version>2.5.3</version>
</plugin>
... and configured like so in the service pom along with the plugin I'm trying to invoke via the <goals> parameter:
<plugin>
<artifactId>maven-release-plugin</artifactId>
<configuration>
<goals>deploy dockerfile:build dockerfile:push</goals>
</configuration>
</plugin>
<plugin>
<groupId>com.spotify</groupId>
<artifactId>dockerfile-maven-plugin</artifactId>
<configuration>
<repository>12345.ecr.us-east-1.amazonaws.com/project</repository>
</configuration>
</plugin>
The idea is that I'd like to build a Docker image for the service module but it doesn't make sense to build images for other modules in the project. However, when cutting a new release, the goals configuration in the service pom file are never invoked.
Maven version: 3.3.3
maven-release-plugin: 2.5.3
JDK: Oracle 1.8.0u144
The command being used:
mvn -Pstaging -B clean release:clean release:prepare release:perform
I'm not able to share the output from this command.
I've verified that the relevant configurations seem be be applied via
mvn -Pstaging help:effective-pom
My question is: Is what I'm trying to accomplish possible with the release plugin? I haven't found any questions or articles that indicate it's impossible.
With the caveat that I have never used the dockerfile-maven-plugin, try release profiles instead of goals.
Step 1. Edit the release plugin config in project/pom.xml.
<plugin>
<artifactId>maven-release-plugin</artifactId>
<version>2.5.3</version> <!-- should define in pluginManagement -->
<configuration>
<releaseProfiles>publish-docker</releaseProfiles>
<!-- other plugin config -->
</configuration>
</plugin>
Choose a name for the profile that makes sense. I'll use publish-docker as the name here.
Step 2. Add a profile with that name to service/pom.xml:
<profiles>
<profile>
<id>publish-docker</id>
<build>
<plugin>
<groupId>com.spotify</groupId>
<artifactId>dockerfile-maven-plugin</artifactId>
<configuration>
<repository>12345.ecr.us-east-1.amazonaws.com/project</repository>
</configuration>
<executions>
<execution>
<id>docker-publish</id>
<phase>deploy</phase> <!-- important -->
<goals>
<goal>build</goal>
<goal>push</goal>
</goals>
</execution>
</executions>
</plugin>
</build>
</profile>
</profiles>
This profile includes plugin configuration that binds the dockerfile:build and dockerfile:push goals to the deploy phase. The release plugin will enable the publish-docker profile for each module. The profile will only exist in the service module, so that's where it will run.
One other thing I notice. In the release command:
mvn -Pstaging -B clean release:clean release:prepare release:perform
I suspect the -Pstaging part is not actually being applied during the release. The release plugin forks another process for each goal run. To pass the argument to the fork, the arguments parameter is required:
mvn -Pstaging -Darguments="-Pstaging" -B clean release:clean release:prepare release:perform
Sonatype has a repository that I want to deploy a jar file to, and they ask for separate files for application, sources, and javadocs:
Example:
example-application-1.4.7.pom
example-application-1.4.7.jar
example-application-1.4.7-sources.jar
example-application-1.4.7-javadoc.jar
In Scala SBT, I have a command called "package" that generates the jar file for the project, but that only generates "example-application-1.4.7.jar".
Question: What should I do to generate the other two jar files?
In Maven, in order to get the additional -sources and -javadoc artifacts, add to your POM file the following:
<build>
<plugins>
<!-- additional plugin configurations, if any.. -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
<version>3.0.0</version>
<executions>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-javadoc-plugin</artifactId>
<version>2.10.3</version>
<executions>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
Note the snippet above:
We are invoking the Maven Source Plugin to create an additional jar files for sources
We are invoking the Maven Javadoc Plugin to create an additional jar files for javadoc
Executing
mvn clean package
You will find these two additional jars in the target folder.
The .pom file instead is generated during the install phase, but it is not placed under the target folder. Basically, it is a copy of your pom.xml file, with a different extension and used by Maven during the dependency mediation process to check which transitive dependencies are required by the concerned artifact.
Executing
mvn clean install
Maven will install the artifact in your local cache (in your machine), under path_to_cache/.m2/repository/your_groupId/your_artifactId/your_version/. In this folder, you will also find the .pom file, which normally you don't need to distribute (it is created automatically by Maven).
Further note: you probably don't want to generate these additional jar files at each and every build, so to speed up normal builds and have them only on demand, you could wrap the snippet above in a Maven profile.
You can achieve this by removing the snippet above from your build section and add a further section at the end of your pom:
<profiles>
<profile>
<id>prepare-distribution</id>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
<version>3.0.0</version>
<executions>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-javadoc-plugin</artifactId>
<version>2.10.3</version>
<executions>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
</profile>
</profiles>
So that normal builds would not create these jars anymore, but when executing the following:
mvn clean install -Pprepare-distribution
You would instead get them back. the -P option is actually activating on demand the profile defined with the id prepare-distribution.
With Maven 3 a default profile already comes as part of the super pom which perform exactly the same actions (sources and javadoc artifact), hence no need to add anything to your existing project. Simply run:
mvn clean install -Prelease-profile
Or, to activate it via a property
mvn clean install -DperformRelease=true
However, as also specified in the super pom, this profile may be removed in future releases (although there since first Maven 3 version till version 3.3.9 so far)
NOTE: The release profile will be removed from future versions of the super POM
The main reason behind this warning is most probably to push for the usage of the Maven Release Plugin, which indirectly makes use of this profile via the useReleaseProfile option of the release:perform goal.
As highlighted by comments, if you are not familiar with maven (especially via console) I would definitely recommend to
Go through the official Maven in 5 minutes documentation for a quick but worthy look.
Play with Maven from the command line, is there where Maven gives you its best. IDE integrations are great, but command line is the real turning point.
Then play with the POM customization above, to get familiar with some concepts and behaviors, first directly as part of your default build, then moved to a profile.
Then, and only then, move to the Maven Release Plugin usage. I recommend it as last step because you would already have acquired more confidence and understanding and see it as less magic and more reasonable approach.
I have a common library that is shared among different project. As the library is constantly extended (at least for now), it should just be picked up from eclipse workspace during build.
I'm trying to use the maven-dependency-plugin to copy all dependencies in a /lib folder next to the runnable jar. But it does not work:
<dependencies>
<!-- A jar that is opened as project in workspace, not installed into maven repo, and not a submodule. It should just be picked up and added as jar during package. -->
<dependency>
<groupId>my.domain</groupId>
<artifactId>project-commons</artifactId>
</dependency>
</dependencies>
<plugin>
<artifactId>maven-dependency-plugin</artifactId>
<version>2.8</version>
<executions>
<execution>
<id>copy-dependencies</id>
<phase>package</phase>
<goals>
<goal>copy-dependencies</goal>
</goals>
<configuration>
<outputDirectory>${project.build.directory}/lib/</outputDirectory>
<overWriteReleases>true</overWriteReleases>
</configuration>
</execution>
</executions>
</plugin>
[ERROR] Failed to execute goal
org.apache.maven.plugins:maven-dependency-plugin:2.8:copy-dependencies
(copy-dependencies) on project mydomain: Artifact has not been
packaged yet. When used on reactor artifact, copy should be executed
after packaging: see MDEP-187. -> [Help 1]
The error ocures when maven tries to copy the commons project that is open in the workspace. Did I miss anything?
I ran into this problem myself today, downloading the latest version of CTAKES (3.2) that integrates YTEX which would build on the command line but not in Eclipse. The error is a result of apparently a known issue with the plugin (https://jira.codehaus.org/browse/MDEP-187).
I eventually fixed it (and I think this will fix your problem) by changing the phase from package to prepare-package.
package
to
prepare-package
Try that and see if it works for you.
We are using the maven release plugin on hudson and trying to automate the release process.
The release:prepare works fine. When we try to do the release:perform , it fails because it tries to upload a source artifact twice to the repository.
Things that I tried,
removing the profile which does include the maven source plugin from the super pom ( did not work)
specifying the goals on hudson for release as -P!attach-source release:prepare release:perform. Which I thought will exclude the source plugin from getting executed. (did not work).
tried specifying the plugin phase to some non existent phase in the super pom.(Did not work)
tried specifying the plugin configuration, forReleaseProfile as false. ( guess what?? Did not work too)
It still spits out this error.
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Checking for pre-existing User-Agent configuration.
[INFO] [DEBUG] Adding User-Agent configuration.
[INFO] [DEBUG] not adding permissions to wagon connection
[INFO] Uploading: http://xx.xx.xx.xx:8081/nexus/content/repositories/releases//com/yyy/xxx/hhh/hhh-hhh/1.9.40/hhh-hhh-1.9.40-sources.jar
[INFO] 57K uploaded (xxx-xxx-1.9.40-sources.jar)
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [DEBUG] Checking for pre-existing User-Agent configuration.
[INFO] [DEBUG] Adding User-Agent configuration.
[INFO] [DEBUG] not adding permissions to wagon connection
[INFO] Uploading: http://xx.xxx.xx.xx:8081/nexus/content/repositories/releases//com/xxx/xxxx/xxx/xxx-xxx/1.9.40/xxx-xxx-1.9.40-sources.jar
[INFO] [DEBUG] Using Wagon implementation lightweight from default mapping for protocol http
[INFO] [INFO] ------------------------------------------------------------------------
[INFO] [ERROR] BUILD ERROR
[INFO] [INFO] ------------------------------------------------------------------------
[INFO] [INFO] Error deploying artifact: Authorization failed: Access denied to: http://xx.xxx.xx.xx:8081/nexus/content/repositories/releases/com/xxx/xxx/xxx/xxx-config/1.9.40/xxx-xxx-1.9.40-sources.jar
Any help regarding this will be really appreciated.
Try running mvn -Prelease-profile help:effective-pom.
You will find that you have two execution sections for maven-source-plugin
The output will look something like this:
<plugin>
<artifactId>maven-source-plugin</artifactId>
<version>2.0.4</version>
<executions>
<execution>
<id>attach-sources</id>
<goals>
<goal>jar</goal>
</goals>
</execution>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
To fix this problem, find everywhere you have used maven-source-plugin and make sure that you use the "id" attach-sources so that it is the same as the release profile. Then these sections will be merged.
Best practice says that to get consistency you need to configure this in the root POM of your project in build > pluginManagement and NOT in your child poms. In the child pom you just specify in build > plugins that you want to use maven-source-plugin but you provide no executions.
In the root pom.xml:
<build>
<pluginManagement>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
<executions>
<execution>
<!-- This id must match the -Prelease-profile id value or else sources will be "uploaded" twice, which causes Nexus to fail -->
<id>attach-sources</id>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</pluginManagement>
</build>
In the child pom.xml:
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
</plugin>
</plugins>
</build>
I know this question is old but it was google hit #1 today so I'll add my answer appropriate for recent versions of maven 3.
The symptom is that sources and javadoc jars are deployed twice when doing a release build with some versions of maven 3. If you're using maven to deploy your artifacts to a Sonatype Nexus repository that only allows a release artifact to be uploaded once (which is totally reasonable behavior), the build fails when the second upload attempt is rejected. Argh!
Maven versions 3.2.3 thru 3.3.9 have bugs - see https://issues.apache.org/jira/browse/MNG-5868 and https://issues.apache.org/jira/browse/MNG-5939. Those versions generate and deploy sources and javadoc jars twice when doing a release.
If I read the Maven issue tracker correctly, those bugs are not scheduled for fix as of this writing (the burned 3.4.0 release probably affected these).
Instead of a complex tweak to my pom, my simple workaround was to fall back to Maven version 3.2.1.
Just having hit the same problem, I analyzed it a bit. mvn release:perform evaluates the release.properties file, then checks out the tag in a temporary directory and invokes there something like
/usr/bin/mvn -D maven.repo.local=... -s /tmp/release-settings5747060794.xml
-D performRelease=true -P set-envs,maven,set-envs deploy
I tried to reproduce this – manually checked out the tag produced by release:prepare and invoked this:
mvn -D performRelease=true -P set-envs,maven,set-envs deploy
I got the same result: It was trying to upload the -sources.jar twice.
As noted by qualidafial in a comment, setting performRelease=false instead omits one of the two attachments of the same file.
I don't really have an idea how the deploy plugin (or any other plugin) uses this property.
We can provide this parameter as a configuration to the maven-relase-plugin:
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
<version>2.3.2</version>
<configuration>
<useReleaseProfile>false</useReleaseProfile>
</configuration>
</plugin>
</plugins>
</build>
I now added the <useReleaseProfile>false</useReleaseProfile> line to all the POMs, and it looks like releasing now works without an error message.
I have been struggeling with this issue for a while and have finally been able to resolve it in our infrastructure. The answers here didn't help me, as we didn't have multiple executions of the source plugin goals and the configuration seemed fine to us.
What we did miss out was to bind the execution of the source plugin to a phase. Extending the example by Bae, including the line <phase>install</phase> to the execution resolved the issue for us:
<plugin>
<artifactId>maven-source-plugin</artifactId>
<version>2.0.4</version>
<executions>
<execution>
<id>attach-sources</id>
<phase>install</phase>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
I suspect the solution lies in this answer here; different plugins seem to be invoking the jar goal / the attach-sources execution. By binding our execution to a certain phase, we force our plugin only to be run in this phase.
This was happening to me when running
mvn install deploy
I avoided the problem by instead running
mvn deploy
(which implies install). In my case only one artifact was being attempted to be uploaded twice, and that was a secondary artifact (maven-jar-plugin was setup to build a secondary jar in addition to the one built by the default-jar execution).
TL;DR
Disable execution with id attach-sources fixes this problem, if you cannot modify your parent poms.
--
This answer is a supplementary for #Bae's answer:
https://stackoverflow.com/a/10794985/3395456
My problem is the same, when running mvn -Prelease-profile help:effective-pom, I have two execution sections for maven-source-plugin
<plugin>
<artifactId>maven-source-plugin</artifactId>
<version>2.0.4</version>
<executions>
<execution>
<id>attach-sources</id>
<goals>
<goal>jar</goal>
</goals>
</execution>
<execution>
<goals>
<goal>jar</goal>
</goals>
</execution>
</executions>
</plugin>
The top voted answer just recommends a best practice to remove unnamed (anonymous) execution to avoid duplicated binding. But what if I cannot remove it, because I cannot change the parent pom?
There is one way to disable one execution, not the anonymous one, but the one with id attach-source. And it also works for uploading xx-javadoc.jar twice.
So under my pom.xml, I can explictly override the plugins settings, by disabling the execution with id attach-source.
<!-- Fix uploading xx-source.jar and xx-javadoc.jar twice to Nexus -->
<!-- try to disable attach-sources, attach-javadocs execution (bind its phase to none) -->
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-source-plugin</artifactId>
<executions>
<execution>
<id>attach-sources</id>
<phase>none</phase>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-javadoc-plugin</artifactId>
<executions>
<execution>
<id>attach-javadocs</id>
<phase>none</phase>
</execution>
</executions>
<inherited>true</inherited>
</plugin>
References:
Is it possible to override executions in maven pluginManagement?
I don't think the probem is in the release plugin, I think you've got the xxx-sources.jar attached two times - that's why the duplicate upload. Why is there a duplicate attachment is hard to tell without seeing the POM. Try running mvn -X and checking the log for who attaches xxx-source.jar another time.
In any case, a good workaround on Nexus would be having a staging repository where you can upload releases several times - and when everything's ready you just close/promote the staging repo. Check the Sonatype OSS setup for an example.
I had the same problem. Basically, the error message is issued when an artifacts is sent to Nexus twice. This may be twice to the same Nexus repository or even across different repositories within the same Nexus.
However, the reasons for such a misconfiguration may vary. In my case, the artifacts were uploaded correctly during a mvn clean deploy build step in Jenkins, but then failed when a second deploy had been attempted. This second deploy had been configured in a Jenkins post build step "Publish artifacts in Maven repository".
Maven plugins in parent and child poms should not have execution. As per standard convention, define all plugin with execution/goals in parent pom in plugin management section. Child pom should not redefine above details, but mention only the plugin (with artifactId, and version) that needs to be executed.
I had similar issue with maven-assembly-plugin with parent pom as below:
<build>
<pluginManagement>
<plugins>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<version>2.6</version>
<configuration>
<descriptors>
<descriptor>src/assembly/assembly.xml</descriptor>
</descriptors>
</configuration>
<executions>
<execution>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</pluginManagement>
</build>
And Child pom had maven-assembly-plugin as below:
<build>
<plugins>
<plugin>
<artifactId>maven-assembly-plugin</artifactId>
<version>2.2-beta-5</version>
<configuration>
<finalName>xyz</finalName>
<descriptors>
<descriptor>src/assembly/assembly.xml</descriptor>
</descriptors>
</configuration>
<executions>
<execution>
<id>xyz-distribution</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
</execution>
</executions>
</plugin>
</plugins>
</build>
Removing the <executions> from child pom rectified the issue.
The effective pom had 2 executions performed causing the duplicate install to Nexus repo.
FWIW this issue was breaking our build for a while and the answer was none-of-the-above.
Instead I had foolishly set the seemingly innocuous appendAssemblyId to false in a maven-assembly-plugin for an artifact that gets attached (read deployed, released) with our main artifact. E.g.:
<execution>
<id>ci-groovy-distrib</id>
<phase>package</phase>
<goals>
<goal>single</goal>
</goals>
<configuration>
<descriptorRefs>
<descriptorRef>my-extra-assembly</descriptorRef>
</descriptorRefs>
<!-- This is the BUG: the assemblyID MUST be appended
because it is the classifier that distinguishes
this attached artifact from the main one!
-->
<appendAssemblyId>false</appendAssemblyId>
<!-- NOTE: Changes the name of the zip in the build target directory
but NOT the artifact that gets installed, deployed, releaseed -->
<finalName>my-extra-assembly-${project.version}</finalName>
</configuration>
</execution>
In summary:
the assembly plugin uses the assemblyId as the classifier for the artifact, hence an essential part of it's unique GAV coordinates in maven terms (actually it's more like GAVC coordinates - C is the classifier).
the name of the file installed, deployed, or released is actually built from these coordinates. It is not the same as the filename you see in your target directory. That's why your local build looks good, but your release will fail.
The stupid element only determines the local build artifact name and plays no part in the rest of it. It's a complete red-herring.
Summary of the summary:
The 400 error from Nexus was because our extra attached artifact was being uploaded over top of the main artifact, since it had the same name as the main artifact, because it had the same GAVC coordinates as the main artifact, because I removed the only distinguishing coordinate: the classifier derived automatically from the assemblyId.
The investigation to find this was a long and tortuous path the answer was right there all along in the docs for maven-assembly:
appendAssemblyId
boolean
Set to false to exclude the assembly id
from the assembly final name, and to create the resultant assembly
artifacts without classifier. As such, an assembly artifact having the
same format as the packaging of the current Maven project will replace
the file for this main project artifact.
Default value is: true.
User property is: assembly.appendAssemblyId.
From http://maven.apache.org/plugins/maven-assembly-plugin/single-mojo.html#attach
The extra bold is mine. The docs should have a big flashing warning here: "Set this to false and abandon all hope"
I got some help from this answer about a different problem maven-assembly-plugin: How to use appendAssemblyId
The explanation there from tunaki really helped.
I faced similar issue. Artifacts were getting deployed twice and the resultant build was failing.
Checked and found that the issue was in Jenkins Script. The settings.xml was called twice. Like:
sh "mvn -s settings.xml clean deploy -s settings.xml deploy -U .....
which caused the issue.
Updated this line and it worked like a charm:
sh "mvn clean deploy -s settings.xml -U .....
with nexus thix configuratio nworked for me
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
<configuration>
<useReleaseProfile>false</useReleaseProfile>
</configuration>
</plugin>
I configured the maven release plug-in with releaseProfile=false and dont execute the source artifacts profile. Which did the trick.
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-release-plugin</artifactId>
<version>2.1</version>
<configuration>
<arguments>-P!source-artifacts</arguments>
<useReleaseProfile>false</useReleaseProfile>
<goals>-Dmaven.test.skip=true deploy</goals>
</configuration>
</plugin>
</plugins>
</build>