I am working on an Smart Card where there is a method in javax.smartcardio.CommandAPDU.
CommandAPDU(int cla, int ins, int p1, int p2, byte[] data, int ne)
I need to send data as byte[] (5th argument). Now my problem is that, as Java primitive data types are signed the max value of a byte can not exceed 127. I need to send a value bigger than 127. To be precise, the hex value 94 which is equal to 148.
As some solution suggests that we can cast it to integer.
byte b = -108;
int i = b & 0xff;
I can't do that as the CommandAPDU(); constructor doesn't take an []. So how to do it?
Depending on how it is interpreted by the smart card, you could just send the correct negative value. If the smart card interprets value as unsigned, you could for example send -1 for 255.
You're calculating the APDU with unsigned bytes, while Java uses signed bytes.
It's just a matter of how the data is interpreted, sending -108 to the smart card will be interpreted in exactly the same way as sending 148 from a platform using unsigned bytes. The bit combination is exactly the same.
Java can even do the conversion itself so that you can write the code using unsigned numbers;
byte data = (byte)0x94; // stores -108 in "data", which will be interpreted
// as 148 on an unsigned platform
For long blocks of data, it is probably best to use a hexadecimal encoder/decoder. But be sure that you handle the data as bytes internally (directly decode and don't look back to the hex String). The Apache codec library contains a good encoder/decoder, or you can use Bouncy Castle or Guava or use one of the many examples on SO.
Related
My android program need to receive int values from arduino analog sensor via usb and print them on real time graph, i receive byte[] from call back function.
i tried many ways to convert from byte[] to string or int include new String new Integer BigInteger parseInt and some code method that i find in other topics, but nothing work i receive only half of the correct values, other values to much bugger or smaller.
The byte[] length changed from 1 to 4 , their is some empty bytes, it look like this(log):
How i can to convert it to correct values? where the problem?
In ideal i need receive int values between 230 to 300 from sensor.
It seems that your sensor is using text protocol. If I convert your bytes to ASCII chars, it will be:
..
10-LF
50-2
53-5
56-8
..
13-CR
10-LF
50-2
53-5
..
54-6
13-CR
10-LF
etc.
Interpreted as
258
256
so, I thing the best solution is to accumulate received bytes as chars and when CRLF is reveived, read whole string (with stripped CRLF) as int - probably via parseInt.
Arduino code segment?
Guessing badly : int is a 16 bit value byte is 8 bits.
Int_8 is -128 to 127 . uint8_t 0-255 not supported by java as far as i know but you can use the char type unsigned 16 bit(need to cast it).
I have system (in c#) to control user access.
I need to have the same access controller in java for an specific case.
This controller has a criptography algorithm (rijndael).
My problem is that this algorithm uses arrays of bytes (byte[]); and this byte type in c# is 0 to 255, and in java is -128 to 127. This difference generate differents results.
How can I make those two codes to use the same byte array?
PS: I can't change the c# code; if I could, I would use sbyte instead of byte.
When you read an unsigned byte[] into a signed byte[] none of the bits are harmed in this progress and no data is lost. The difference is only how the top bit is treated. If you want to turn a signed byte in a value between 0 and 255 you can & it with 0xFF e.g.
int value = bytes[i] & 0xFF;
Someone developed a library for unsigned types you might be able to use:
https://github.com/jOOQ/jOOU
I have a native function (from a library) that does some work on uint8_t types (unsigned 8-bit number 0-255). The closest thing Java has is byte which must be signed.
How can I convert this byte into a proper positive integer to use in Java? I know I'll have to store it in a short or int in order to properly represent numbers from 0-255, but I don't know how to convert the byte.
I tried int intValue = byteValue & 0xFF;, but that is giving me unexpected results, so I suspect it's incorrect. Or that is correct and I am misunderstanding the expected results from the native library function. Would appreciate confirmation either way.
In Java, you can use a Guava library function to convert a byte to an int, treating it as unsigned: UnsignedBytes.toInt. So, if you returned the value of a C++ unsigned value as a byte to Java, you can then fix it up.
If you want to make it into an int and then return it to java as an int, that should be perfectly straightforward.
I have one file created by c++ program which is in encrypted format. I want to read it in my java program. In case of decryption of file contents, decryption algorithm is performing operations on byte[which is unsigned char-BYTE in c/c++]. I used same decryption algorithm which I have used in my c/c++ program. This algorithm contains ^, %, * and - operations on byte. But byte datatype of java is signed because of which I am facing problems in decryption. How can I read file or process read data with 1byte at a time which is unsigned?
thanks in advance.
byte b = <as read from file>;
int i = b & 0xFF;
Perform operations on i as required
The standard method InputStream.read() reads one byte and fits it into a int, so in practice it is an unsinged byte. There are no unsigned primitive data types in java, so the only approach is to fit it in an upper primitive.
That being said you should have no trouble performing encryption/decryption over data bytes read from the file, since the bytes are the same, no matter if they are interpreted as signed or unsigned (0xFF can be 255 or -1). You say the alghorithm contains "^, %, *", etc. That is an interpretation of raw bytes, taking into account a character encoding (that fits 8 bit per character I suppose). You should not perform encryption/decryption operations over other than raw bytes.
First, InputStream.read() returns an int but it holds a byte; it uses an int so -1 can be returned if the EOF is reached. If the int is not -1, you can cast it to byte.
Second, there are read() metods that allow storing the bytes directly in a byte[]
And last, if you are going to use the file as a byte[] (and it is not too big) maybe it would be interesting copying the data from FileInputStream and write it into a ByteArrayOutputStream. You can get the resulting byte[] from the late object (note: do not use the .read() method, use .read(byte[], int, int) for performance).
Since there is no unsigned primitive type in Java, I think what you can do is to convert signed byte into integer (which will virtually be unsigned because the integer will always be positive). You can follow the code in here: Can we make unsigned byte in Java for the conversion.
I have a program that I made in Python to find specific tags in TIFF IFD's and return the values. It was just a proof of concept thing in python, and now I need to move the functionality to java. I think I can just use the String(byteArray[]) constructor for the ASCII data types, but I still need to get Unsigned short (2 byte) and unsigned long (4 byte) values. I don't need to write them back to the file or modify them, all I need to do is get a Java Integer or Long object from them. This is easy in python with the struct and mmap classes, does any one know of a similar way in java? I looked at the DataInput class, but the readUnsignedLong method reads 8 bytes.
DataInputStream allows you to read shorts and longs. You should mask them with the appropriate bit mask (0xFFFF for short, 0xFFFFFFFF for 32 bit) in order to account for the difference between signed/unsigned types.
e.g.
// omits error handling
FileInputStream fis = ...;
DataInputStream stream = new DataInputStream(fis);
int short_value = 0xFFFF & stream.readShort();
long long_value = 0xFFFFFFFF & stream.readInt();
If you're sure that the data won't be towards the high end of the 2 byte field, or 4 byte field, you can forego the bit masking. Otherwise, you need to use a wider data type to account for the fact that unsigned values hold a larger range of values than their signed counterparts.
I looked at the DataInput class, but the readUnsignedLong method reads 8 bytes.
Java does not have unsigned types. It takes 4 bytes to make an int, and 8 bytes to make a long, unsigned or otherwise.
If you don't want to use DataInput, you can read the bytes into byte arrays (byte[]) and use a ByteBuffer to turn those byte values into ints and longs with left padding. See ByteBuffer#getInt() and ByteBuffer#getLong().
DataInput would be the preferred method. You can use readUnsignedShort for the two byte values. For the 4 byte values you'll have to use this workaround...
long l = dis.readInt() & 0xffffffffL;
You could use Javolution's Struct class which provides structure to regions of data. You set up a wrapper and then use the wrapper to access the data. Simples. Java really needs this super-useful class in its default classpath TBQH.
Preon Library is good to create struct in Java. I have tried Javolution's Struct but it was not help full my case. It is open source and very good library.