We Keep Coding

Jetty 9 WebSocket client issue when using secure connection

I'm writing a WebSocket client in a java application, using the Jetty 9.4.18 libraries.
I'm pretty new to WebSockets, so I started testing using the two sample classes from the Jetty documentation, connecting to echo.websocket.org
The test runs fine when I connect without SSL, but if fails when the connection is done to wss://echo.websocket.org
I always get the same exception:
java.io.EOFException: HttpConnectionOverHTTP#50371e9d::DecryptedEndPoint#6dc65fc2{echo.websocket.org/174.129.224.73:443<->/192.168.1.34:60521,OPEN,fill=-,flush=C,to=226/0}
at org.eclipse.jetty.client.http.HttpReceiverOverHTTP.earlyEOF(HttpReceiverOverHTTP.java:338)
at org.eclipse.jetty.http.HttpParser.parseNext(HttpParser.java:1551)
at org.eclipse.jetty.client.http.HttpReceiverOverHTTP.shutdown(HttpReceiverOverHTTP.java:209)
at org.eclipse.jetty.client.http.HttpReceiverOverHTTP.process(HttpReceiverOverHTTP.java:147)
at org.eclipse.jetty.client.http.HttpReceiverOverHTTP.receive(HttpReceiverOverHTTP.java:73)
at org.eclipse.jetty.client.http.HttpChannelOverHTTP.receive(HttpChannelOverHTTP.java:133)
at org.eclipse.jetty.client.http.HttpConnectionOverHTTP.onFillable(HttpConnectionOverHTTP.java:155)
at org.eclipse.jetty.io.AbstractConnection$ReadCallback.succeeded(AbstractConnection.java:305)
at org.eclipse.jetty.io.FillInterest.fillable(FillInterest.java:103)
at org.eclipse.jetty.io.ssl.SslConnection$DecryptedEndPoint.onFillable(SslConnection.java:411)
at org.eclipse.jetty.io.ssl.SslConnection.onFillable(SslConnection.java:305)
at org.eclipse.jetty.io.ssl.SslConnection$2.succeeded(SslConnection.java:159)
at org.eclipse.jetty.io.FillInterest.fillable(FillInterest.java:103)
at org.eclipse.jetty.io.ChannelEndPoint$2.run(ChannelEndPoint.java:118)
at org.eclipse.jetty.util.thread.QueuedThreadPool.runJob(QueuedThreadPool.java:765)
at org.eclipse.jetty.util.thread.QueuedThreadPool$2.run(QueuedThreadPool.java:683)
at java.lang.Thread.run(Thread.java:748)
It looks like the server closes without answering to the handshake request.
I am aware of SslContextFactory, but my understanding is that it should be used only if you need your own TrustStore or KeyStore, or for other special cases.
Note also that after some failed attempt I downloaded another websocket implementation from https://github.com/TooTallNate/Java-WebSocket, and it works fine with both ws and wss, without setting anything specific for SSL.
However for this project I'm bind to use Jetty.
The code I'm using is exactly the sample from Jetty documentation at https://www.eclipse.org/jetty/documentation/9.4.x/jetty-websocket-client-api.html
the only change I did was to add an onError method to SimpleEchoSocket, that dumps the full exception stack.
Am I missing something?
Thanks in advance!

Unfortunately, websocket.org (and Kaazing host/proxy) has a bunch of TLS issues at this point in time, so using their public servers are not sane choice right now.
Here's a different demo, also using TLS and WebSocket, against a stackexchange server with a proper and sane TLS/SSL implementation.
This was written against Jetty 9.4.18.v20190429
package org.eclipse.jetty.demo;
import java.net.URI;
import java.util.concurrent.Future;
import org.eclipse.jetty.client.HttpClient;
import org.eclipse.jetty.util.component.LifeCycle;
import org.eclipse.jetty.util.log.Log;
import org.eclipse.jetty.util.log.Logger;
import org.eclipse.jetty.util.ssl.SslContextFactory;
import org.eclipse.jetty.websocket.api.Session;
import org.eclipse.jetty.websocket.api.annotations.OnWebSocketClose;
import org.eclipse.jetty.websocket.api.annotations.OnWebSocketConnect;
import org.eclipse.jetty.websocket.api.annotations.OnWebSocketError;
import org.eclipse.jetty.websocket.api.annotations.OnWebSocketMessage;
import org.eclipse.jetty.websocket.api.annotations.WebSocket;
import org.eclipse.jetty.websocket.client.WebSocketClient;
#WebSocket
public class SecureClientSocket
{
private static final Logger LOG = Log.getLogger(SecureClientSocket.class);
public static void main(String[] args)
{
String url = "wss://qa.sockets.stackexchange.com/";
SslContextFactory ssl = new SslContextFactory.Client();
ssl.setEndpointIdentificationAlgorithm("HTTPS");
HttpClient http = new HttpClient(ssl);
WebSocketClient client = new WebSocketClient(http);
try
{
http.start();
client.start();
SecureClientSocket socket = new SecureClientSocket();
Future<Session> fut = client.connect(socket, URI.create(url));
Session session = fut.get();
session.getRemote().sendString("Hello");
session.getRemote().sendString("155-questions-active");
}
catch (Throwable t)
{
LOG.warn(t);
}
finally
{
stop(http);
stop(client);
}
}
private static void stop(LifeCycle lifeCycle)
{
try
{
lifeCycle.stop();
}
catch (Exception e)
{
e.printStackTrace();
}
}
#OnWebSocketConnect
public void onConnect(Session sess)
{
LOG.info("onConnect({})", sess);
}
#OnWebSocketClose
public void onClose(int statusCode, String reason)
{
LOG.info("onClose({}, {})", statusCode, reason);
}
#OnWebSocketError
public void onError(Throwable cause)
{
LOG.warn(cause);
}
#OnWebSocketMessage
public void onMessage(String msg)
{
LOG.info("onMessage() - {}", msg);
}
}

How to check programmatically if Zookeeper is running?

I am using CuratorFramework (I'm still a newbie) in order to connect to a Zookeeper instance. I would like to import a configuration but before that I would like to test that my program is able to connect to Zookeeper. So far I have something like that:
public Boolean zookeeperRunning() {
CuratorFramework curatorFramework =
CuratorFrameworkFactory.newClient(zookeeperConn, new RetryOneTime(1));
curatorFramework.start();
CuratorZookeeperClient zkClient = curatorFramework.getZookeeperClient();
return zkClient.isConnected();
}
I've already started ZooKeeper on my local machine and I checked the connection with zkCli and the client is able to connect to it. The zookeeperCon variable is set to "127.0.0.1:2181" (I tried with localhost:2181 as well). The problem is that the above method always returns false despite the fact that zkServer is up n running. Most probably, the syntax is not correct but I could not find a solution online. Could you please help me with why the above code cannot find the zkServer which is up and running?

You can use a builder to create a configured client and setup a listener to monitor your zk instance's state:
// start client
client = CuratorFrameworkFactory.builder()
.connectString("localhost:2181")
.retryPolicy(new ExponentialBackoffRetry(1000, 3))
.namespace("heavenize")
.build();
client.getConnectionStateListenable().addListener(new ConnectionStateListener() {
#Override
public void stateChanged(CuratorFramework client, ConnectionState newState)
{
log.info("State changed to: "+newState);
}
});
}

You should first connect to zookeeper after you get the zkClient, if success, then check the isConnected status. Demo code below(Refer: here):
private static CuratorFramework buildConnection(String url) {
CuratorFramework curatorFramework = CuratorFrameworkFactory.newClient(url, new ExponentialBackoffRetry(100, 6));
// start connection
curatorFramework.start();
// wait 3 second to establish connect
try {
curatorFramework.blockUntilConnected(3, TimeUnit.SECONDS);
if (curatorFramework.getZookeeperClient().isConnected()) {
return curatorFramework.usingNamespace("");
}
} catch (InterruptedException ignored) {
Thread.currentThread().interrupt();
}
// fail situation
curatorFramework.close();
throw new RuntimeException("failed to connect to zookeeper service : " + url);
}

you should connect to zookeeper server then check it. for example:
import org.apache.curator.framework.CuratorFramework;
import org.apache.curator.test.TestingServer;
import org.junit.After;
import org.junit.Before;
import org.junit.Test;
import java.io.IOException;
import java.util.concurrent.TimeUnit;
import static org.junit.Assert.assertTrue;
public class ZkClientTest {
TestingServer zkServer;
#Before
public void startZookeeper() throws Exception {
zkServer = new TestingServer(2181);
zkServer.start();
}
#After
public void stopZookeeper() throws IOException {
zkServer.stop();
}
#Test
public void should_connect_to_zookeeper_server_when_config_use_default_localhost_2181()
throws InterruptedException {
CuratorFramework client = ZkClient.getInstance().getClient();
try {
client.blockUntilConnected(3, TimeUnit.SECONDS);
assertTrue(ZkClient.getInstance().getClient().getZookeeperClient().isConnected());
} finally {
ZkClient.getInstance().close();
}
}
}

Java on ServiceBus for Windows Server- Options?

What are the options available to develop Java applications using Service Bus for Windows?
Java Message Broker API - This need ACS to work with, which SB for Win doesnt support.
AMQP - This doesnt seem to work on SB for Windows, I keep getting error
org.apache.qpid.amqp_1_0.client.Sender$SenderCreationException: Peer did not create remote endpoint for link, target:
While the same code works with Azure SB. So AMQP on SB for Windows seems to be not fully working?
Correct me if I have missed something?
Update
To test AMQP on local machine, this is what I did
Installed Service bus 1.1 on my local machine
Took the sample mentioned here http://www.windowsazure.com/en-us/develop/java/how-to-guides/service-bus-amqp/
Created a new namespace on my local machine
Specified the following connection string in servicebus.properties (which is correctly referred in the code
connectionfactory.SBCF = amqps://<username>:<password>#<MachineName>:5671/StringAnalyzerNS/
queue.QUEUE = queue1
Code is updated with certificates.
At runtime I get this error
javax.jms.JMSException: Peer did not create remote endpoint for link, target: queue1
at org.apache.qpid.amqp_1_0.jms.impl.MessageProducerImpl.<init>(MessageProducerImpl.java:77)
at org.apache.qpid.amqp_1_0.jms.impl.SessionImpl.createProducer(SessionImpl.java:348)
at org.apache.qpid.amqp_1_0.jms.impl.SessionImpl.createProducer(SessionImpl.java:63)
at com.stringcompany.Analyzer.SimpleSenderReceiver.<init>(SimpleSenderReceiver.java:70)
at com.stringcompany.Analyzer.SimpleSenderReceiver.main(SimpleSenderReceiver.java:95)
Caused by: org.apache.qpid.amqp_1_0.client.Sender$SenderCreationException: Peer did not create remote endpoint for link, target: queue1
at org.apache.qpid.amqp_1_0.client.Sender.<init>(Sender.java:171)
at org.apache.qpid.amqp_1_0.client.Sender.<init>(Sender.java:104)
at org.apache.qpid.amqp_1_0.client.Sender.<init>(Sender.java:97)
at org.apache.qpid.amqp_1_0.client.Sender.<init>(Sender.java:83)
at org.apache.qpid.amqp_1_0.client.Sender.<init>(Sender.java:69)
at org.apache.qpid.amqp_1_0.client.Sender.<init>(Sender.java:63)
at org.apache.qpid.amqp_1_0.client.Session.createSender(Session.java:74)
at org.apache.qpid.amqp_1_0.client.Session.createSender(Session.java:66)
at org.apache.qpid.amqp_1_0.jms.impl.MessageProducerImpl.<init>(MessageProducerImpl.java:72)
... 4 more
javax.jms.JMSException: Session remotely closed
With the same code If I point to Azure service bus by setting the SB namespace and queue like below
connectionfactory.SBCF = amqps://<Policy name>:<Sec. Key>#<ns>.servicebus.windows.net
queue.QUEUE = testq
This works, messages are exchanged.
Here is the code if someone wants to try it
package com.stringcompany.Analyzer;
//SimpleSenderReceiver.java
import java.io.BufferedReader;
import java.io.InputStreamReader;
import java.util.Hashtable;
import java.util.Random;
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.Destination;
import javax.jms.ExceptionListener;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.MessageConsumer;
import javax.jms.MessageListener;
import javax.jms.MessageProducer;
import javax.jms.Queue;
import javax.jms.Session;
import javax.jms.TextMessage;
import javax.naming.Context;
import javax.naming.InitialContext;
public class SimpleSenderReceiver implements MessageListener {
private static boolean runReceiver = true;
private Connection connection;
private Session sendSession;
private Session receiveSession;
private MessageProducer sender;
private MessageConsumer receiver;
private static Random randomGenerator = new Random();
public SimpleSenderReceiver() throws Exception {
// Configure JNDI environment
Hashtable<String, String> env = new Hashtable<String, String>();
env.put(Context.INITIAL_CONTEXT_FACTORY,
"org.apache.qpid.amqp_1_0.jms.jndi.PropertiesFileInitialContextFactory");
env.put(Context.PROVIDER_URL, "D:\\Java\\Azure\\workspace\\Analyzer\\src\\main\\resources\\servicebus.properties");
Context context = new InitialContext(env);
// Lookup ConnectionFactory and Queue
ConnectionFactory cf = (ConnectionFactory) context.lookup("SBCF");
System.out.println("cf:"+cf);
// Create Connection
connection = cf.createConnection();
System.out.println("connection :"+connection);
connection.setExceptionListener(new ExceptionListener() {
public void onException(JMSException arg0) {
System.err.println(arg0);
}
});
connection.start();
// Create sender-side Session and MessageProducer
sendSession = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
System.out.println("Session open");
Destination queue = (Destination) context.lookup("QUEUE");
System.out.println("queue:"+queue);
sender = sendSession.createProducer(queue);
Queue q=(Queue) queue;
System.out.println(sender.getDestination());
System.out.println("sender:"+sender);
if (runReceiver) {
System.out.println("Waitng for new message");
// Create receiver-side Session, MessageConsumer,and MessageListener
receiveSession = connection.createSession(false,
Session.CLIENT_ACKNOWLEDGE);
receiver = receiveSession.createConsumer(queue);
receiver.setMessageListener(this);
connection.start();
}
}
public static void main(String[] args) {
try {
if ((args.length > 0) && args[0].equalsIgnoreCase("sendonly")) {
runReceiver = false;
}
//System.setProperty("javax.net.debug","ssl");
System.setProperty("javax.net.ssl.trustStore","D:\\Java\\Azure\\workspace\\Analyzer\\src\\main\\resources\\SBKeystore.keystore");
System.setProperty("log4j.configuration","D:\\Java\\Azure\\workspace\\Analyzer\\src\\main\\resources\\log4j.properties");
SimpleSenderReceiver simpleSenderReceiver = new SimpleSenderReceiver();
System.out
.println("Press [enter] to send a message. Type 'exit' + [enter] to quit.");
BufferedReader commandLine = new java.io.BufferedReader(
new InputStreamReader(System.in));
while (true) {
String s = "Message";//commandLine.readLine();
if (s.equalsIgnoreCase("exit")) {
simpleSenderReceiver.close();
System.exit(0);
} else {
simpleSenderReceiver.sendMessage();
}
}
} catch (Exception e) {
e.printStackTrace();
}
}
private void sendMessage() throws JMSException {
TextMessage message = sendSession.createTextMessage();
message.setText("Test AMQP message from JMS");
long randomMessageID = randomGenerator.nextLong() >>> 1;
message.setJMSMessageID("ID:" + randomMessageID);
sender.send(message);
System.out.println("Sent message with JMSMessageID = "
+ message.getJMSMessageID());
}
public void close() throws JMSException {
connection.close();
}
public void onMessage(Message message) {
try {
System.out.println("Received message with JMSMessageID = "
+ message.getJMSMessageID());
message.acknowledge();
} catch (Exception e) {
e.printStackTrace();
}
}
}

Hi we had the same problems and thankfully MS updated their documentation to show how to do this correctly. :
http://msdn.microsoft.com/en-us/library/dn574799.aspx

The simplest answer to the question is as you should URL Encode the SASPolicyKey.
connectionfactory.SBCF = amqps://[SASPolicyName]:[SASPolicyKey]#[namespace].servicebus.windows.net
Where SASPolicyKey should be URL-Encoded.

AMQP 1.0 is supported with Service Bus 1.1 for windows server. Basically there are two differences between the cloud and on-prem usage of AMQP in ServiceBus:
1. Addressing: You will need to build an AMQP connection strings (and will need DNS in case you're looking for HA)
2. Authentication: You will need to use domain joined accounts as ACS is not there on-prem. You will also need to distribute your SB certificate to your clients.

Ok, I have sorted the first issue (Java Message Broker API not supporting SAS endpoint), by writing a wrapper which will seamlessly work with existing API. You can get the library from this GitHub repository. With this, I can develop/test my Java application on local service bus environment and host it on Azure / On-Premise Service Bus farm.
https://github.com/Dhana-Krishnasamy/ServiceBusForWindows-SASWrapper

The sender and receiver Queues you will have to configure differently. Here is an example of my working configuration (servicebus.properties):
connectionfactory.SBCF = amqps://$PolicyName:$UrlEncodedKey#$Your-EventHub-NamespaceName.servicebus.windows.net
queue.EventHubSender=$YourEventHubName
queue.EventHubReceiver=$YourEventHubName/ConsumerGroups/$YourConsumerGroupName/Partitions/1
Replace appropriately your own '$' items in there.
The Shared Policy Key has to be URL encoded.
Make sure that your sender will reference the 'EventHubSender' defined in this config and the receiver will reference the 'EventHubReciever'.

Grab the Azure Java SDK from http://www.windowsazure.com/en-us/develop/java/ and then follow this guide: http://www.windowsazure.com/en-us/develop/java/how-to-guides/service-bus-queues/

What are the possible causes that let ActiveMQ application silently quit?

I have made a simple ActiveMQ application.
It listens to a queue. If a message comes, print out the dataId
Here is the code:
import javax.jms.Connection;
import javax.jms.ConnectionFactory;
import javax.jms.Destination;
import javax.jms.ExceptionListener;
import javax.jms.JMSException;
import javax.jms.MapMessage;
import javax.jms.Message;
import javax.jms.MessageConsumer;
import javax.jms.MessageListener;
import javax.jms.Session;
import org.apache.activemq.ActiveMQConnectionFactory;
public class MQ implements MessageListener {
private Connection connection = null;
private Session session = null;
private Destination destination = null;
private void errorOnConnection(JMSException e) {
System.out.println("MQ is having problems. Exception::"+ e);
}
private void init() throws JMSException {
String BROKER_URL = "failover:(tcp://myQueue001:61616,tcp://myQueue002:61616)?randomize=false";
ConnectionFactory connectionFactory = new ActiveMQConnectionFactory(BROKER_URL);
connection = connectionFactory.createConnection("user", "password");
connection.setExceptionListener(
new ExceptionListener() {
#Override public void onException(JMSException e) {
errorOnConnection(e);
}
});
session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
destination = session.createQueue("myQueue");
MessageConsumer consumer = session.createConsumer(destination);
consumer.setMessageListener(this);
}
public boolean start() {
try {
if(connection==null )
init();
connection.start();
} catch (Exception e) {
System.out.println("MQListener cannot be started, exception: " + e);
}
return true;
}
#Override
public void onMessage(Message msg) {
try {
if(msg instanceof MapMessage){
MapMessage m = (MapMessage)msg;
int dataId = m.getIntProperty("dataId");
System.out.println(dataId);
}
} catch (JMSException e) {
System.out.println("Got an exception: " + e);
}
}
public static void main(String[] args) {
MQ mq = new MQ();
mq.start();
}
}
It works fine and does what it is meant to accomplish.
However, the problem is that it can run only for several days. After several days, it just quits silently without any exceptions or error.
The queue I am listening to is from 3rd party. From a guy there, the queue sometimes will be closed or restarted or interrupted.
But I think even if that happen, the default ActiveMQ settings will handle it by consistently reconnect to it, right? (according to http://activemq.apache.org/cms/configuring.html)
So any other possible causes which lead my code to quitting silently?

Depends on bit on your version. Since you are not doing anything yourself to keep the application running but instead depending on the ActiveMQ code to keep at least one non-deamon thread running. In some ActiveMQ versions the client wasn't always doing this so your application could quite while a failover was occurring. Best bet is to switch to v5.8.0 which I believe had some fixes for this.
You could add some polling code in main to read something from console or what not to ensure that the client stays up until you are sure you want it to go down.

how to automate sending commands using SSH factory

I am using ssh factory to automate the logins. I have to automate logins till 4 gateways and send commands and get output's of it. I have successfully automated till 3 gateways. Now i have to fire command "telnet remote_ip" to get into the 4th gateway. Where i am using telnet sessions for this 4th gateway alone since i need to fire "telnet ip", since it is using telnet protocol over here. But for the previous 3 gateway's i've used ssh sessions. But it is not firing this "telnet ip" command. Can some1 help me regarding this?.
Below is the code, where i am trying to automate it.
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.File;
import java.io.FileInputStream;
import java.io.FileWriter;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.PrintWriter;
import java.util.Scanner;
import com.jscape.inet.ssh.Ssh;
import com.jscape.inet.ssh.SshAdapter;
import com.jscape.inet.ssh.SshConnectedEvent;
import com.jscape.inet.ssh.SshDataReceivedEvent;
import com.jscape.inet.ssh.SshDisconnectedEvent;
import com.jscape.inet.ssh.SshException;
import com.jscape.inet.ssh.SshScript;
import com.jscape.inet.ssh.SshSession;
import com.jscape.inet.ssh.SshTask;
import com.jscape.inet.ssh.connection.channels.SessionClient;
import com.jscape.inet.ssh.connection.channels.SessionRequests;
import com.jscape.inet.ssh.util.SshParameters;
import com.jscape.inet.telnet.Telnet;
import com.jscape.inet.telnet.TelnetException;
import com.jscape.inet.telnet.TelnetListener;
import com.jscape.inet.telnet.TelnetScript;
import com.jscape.inet.telnet.TelnetSession;
import com.jscape.inet.telnet.TelnetTask;
public class SshScriptTutorial extends SshAdapter {
public SshScriptTutorial() {}
public void executeSshScript(String hostname, String username, String password)
throws SshException, IOException, InterruptedException, TelnetException
{
// assumes that SSH shell prompt is ">" .. this MUST match exactly
String shellPrompt = ">";
String shellPrompt1 = ":";
// initialize and create new Ssh instance
SshParameters sshParams = new SshParameters(hostname,username,password);
Ssh ssh = new Ssh(sshParams);
// register this class to receive Ssh events
ssh.addSshListener(this);
// create new script object and bind to the given ssh object
SshScript script = new SshScript(ssh);
// add tasks to script object
script.addTask(new SshTask(shellPrompt, "show host", shellPrompt));
script.addTask(new SshTask(shellPrompt, "ssh ssgpun", shellPrompt1)); // 2nd g/w
script.addTask(new SshTask(shellPrompt1, "password", shellPrompt));
script.addTask(new SshTask(shellPrompt, "net ip", shellPrompt1)); // 3rd gateway
script.addTask(new SshTask(shellPrompt1, "username", shellPrompt1));
script.addTask(new SshTask(shellPrompt1, "password", shellPrompt));
// till this it is working
// connect to SSH server and execute script
ssh.connect();
// wait until last task is complete
while(!script.isComplete()) {
try {
Thread.sleep(500);
} catch(Exception e) {
System.err.println(e.getMessage());
}
}
// disconnect from server
// ssh.disconnect();
//**
Here i am trying to get into the last remote server using command "telnet ip" using telnet session since it is involving telnet protocol. But it is not firing this command itself. So, can anybody help me regarding this. How to do?... I have even tried using ssh sessions for this "telnet ip" and for username and pass. If i use ssh session for this 4th gateway, i am able to automate only "telnet ip" and it is asking for login name, and login name is not automated. So, i have tried both ssh sessions and telnet sessions. I dont know what is the prob or how to solve it.
Kindly help...
//**
// create new Telnet instance
Telnet telnet = new Telnet("10.228.128.33");
// create new TelnetScript instance and bind to Telnet instance
TelnetScript script_t = new TelnetScript(telnet);
// create a task that waits for login prompt and submits username
TelnetTask username_t = new TelnetTask(shellPrompt1,"switchind", shellPrompt1);
// create task that waits for password prompt and submits password
TelnetTask password_t = new TelnetTask(shellPrompt1, "Indore123", shellPrompt);
// add tasks to script
script_t.addTask(username_t);
script_t.addTask(password_t);
// connect to telnet server … script is executed automatically
telnet.connect();
}
public void connected(SshConnectedEvent event) {
System.out.println("Connected to host: " + event.getHost());
}
public void disconnected(SshDisconnectedEvent event) {
System.out.println("Disconnected from host: " + event.getHost());
}
public void dataReceived(SshDataReceivedEvent event) {
System.out.print(event.getData());
}
public static void main(String[] args)
{
try
{
BufferedReader reader = new BufferedReader(new InputStreamReader(System.in));
String hostname = "host_ip";
String username = "username";
System.out.print("Enter password: ");
String password = reader.readLine();
SshScriptTutorial tutorial = new SshScriptTutorial();
tutorial.executeSshScript(hostname, username, password);
} catch(Exception e) {
e.printStackTrace();
}
}
}