I am using nexus 2.10 having recently upgraded from nexus 2.8. The reason I upgraded was because I was getting the following exception in my logs and thus the jar was not downloaded and Nexus 2.10 gives a few more details in the log regarding the broken pipe error.
So in my logs I get the following error (replaced i[p address with string host name).
2014-10-21 15:18:22,556+0100 INFO [qtp-855494215-66] anonymous org.sonatype.nexus.proxy.storage.remote.httpclient.HttpClientRemoteStorage - Initializing remote transport for proxy repository "Central" [id=central]...
2014-10-21 15:23:59,440+0100 WARN [qtp-855494215-69] anonymous org.sonatype.nexus.content.internal.ContentServlet - org.eclipse.jetty.io.EofException, caused by: java.io.IOException: Broken pipe [client=host.name,ua=m2e/3.9.1.v20130814-1242/1.4.0.20130601-0317/1.6.0_45,req=GET http://xx.xx:8081/nexus/content/groups/public/org/springframework/spring-jdbc/4.1.1.RELEASE/spring-jdbc-4.1.1.RELEASE.jar]
2014-10-21 15:24:43,329+0100 WARN [qtp-855494215-67] anonymous org.sonatype.nexus.content.internal.ContentServlet - org.eclipse.jetty.io.EofException, caused by: java.io.IOException: Broken pipe [client=host.name,ua=m2e/3.9.1.v20130814-1242/1.4.0.20130601-0317/1.6.0_45,req=GET http://xx.xx5:8081/nexus/content/groups/public/org/springframework/spring-tx/4.1.1.RELEASE/spring-tx-4.1.1.RELEASE.jar]
2014-10-21 15:24:58,333+0100 WARN [qtp-855494215-66] anonymous org.sonatype.nexus.content.internal.ContentServlet - org.eclipse.jetty.io.EofException, caused by: java.io.IOException: Broken pipe [client=host.name,ua=m2e/3.9.1.v20130814-1242/1.4.0.20130601-0317/1.6.0_45,req=GET http://xx.xx:8081/nexus/content/groups/public/org/springframework/spring-context/4.1.1.RELEASE/spring-context-4.1.1.RELEASE-sources.jar]
Can anyone advise how to get past this error because currently some jars are not being downloaded. This does not apply to all jars for eg i just downloaded the nekohtml-0.9.5.jar no issues. Could this be possibly something to do with size? In my maven repository I just get a spring-test-4.1.1.RELEASE.jar.lastUpdated jar which is only 1kb in size.
Also I am running behind a firewall so have a proxy server configured in the nexus settings.
UPDATE:
this seems to be an issue only when done through eclipse. I was able to download sources and jars etc fine when I did it from the command line. I am using Eclipse keplar and the m2e plugin. Can anyone comment on this?
All advice appreciated
Thanks
The broken pipe exception occurs when nexus has received an http request from a client, prepares a response, but when it goes to write the response it finds the socket has already been closed.
Likely causes of this are:
An end user initiating a request and then canceling it (or
navigating away from a web page before it completes)
A client which does not properly close socket connections
A client's read timeout setting being reached
A reverse proxy in between nexus and the client (such as apache or
nginx) terminating the connection
Therefore you'll need to begin your investigation on the client side. If it turns out the client or reverse proxy's read timeout setting is triggering this then you'll need to investigate why nexus is responding slowly.
Your Nexus server is probably not able to reach some external repositories if it is running inside a network behind a proxy. You have to make sure you have the http proxy configured in Nexus and that any URL's of remote proxy repositories you want to access are allowed in the proxy.
You can use the "Browse Remote" feature to check if the access works. More details are in the Nexus book http://books.sonatype.com/nexus-book/reference/configxn-sect-customizing-server.html
Related
I'm trying to clone and build a GitHub repo using Bazel, but a dependency requires an old verson of zlib via an outdated URL. I've already spent a few hours trying to do things like messing with the /etc/hosts file and running a web server to get it to work. I've gotten zlib.net to point to localhost, then running a web server on localhost:80 with zlib at the correct path, but that's not working, since the request is timing out.
I've googled it and only about 3 remotely relevant results have popped up, none of which are helpful.
How do I get it to build?
This is the error:
Error in download_and_extract: java.io.IOException: Error downloading [https://zlib.net/zlib-1.2.11.tar.gz] to /private/var/tmp/_bazel_user/37df51594c7eac8a62dd677a22c5514b/external/zlib/temp16216011345324291299/zlib-1.2.11.tar.gz: GET returned 404 Not Found
It is timing out because the request uses HTTPS, which is port 443, not HTTP on port 80. You can use a similar approach to what you are doing (with the hosts file) but just run a HTTPS server on port 443.
This can be achieved using tools such as ngrok and your current localhost web server.
Given this stack trace snippet
Caused by: java.net.SocketException:
Software caused connection abort:
socket write error at
java.net.SocketOutputStream.socketWrite0(Native
Method)
I tried to answer the following questions:
What code is throwing this exception? (JVM?/Tomcat?/My code?)
What causes this exception to be thrown?
Regarding #1:
Sun's JVM source doesn't contain this exact message, but I think the text Software caused connection abort: socket write error is from the native implementation of SocketOutputStream:
private native void socketWrite0(FileDescriptor fd, byte[] b, int off,
int len) throws IOException;
Regarding #2
My guess is that it is caused when the client has terminated the connection, before getting the full response (e.g. sent a request, but before getting the full response, it got closed / terminated / offline)
Questions:
Are the above assumptions correct (#1 and #2)?
Can this be diffrentiated from the situation: "could not write to the client, due to a network error on the server side"? or would that render the same error message?
And most important: Is there an official document (e.g from Sun) stating the above?
I need to have a proof that this stack trace is the socket client's "fault", and there is nothing that the server could have done to avoid it. (except catching the exception, or using a non Sun JVM SocketOutputStream, though both don't really avoid the fact the client has terminated)
This error can occur when the local network system aborts a
connection, such as when WinSock closes an established connection
after data retransmission fails (receiver never acknowledges data sent
on a datastream socket).
See this MSDN article. See also Some information about 'Software caused connection abort'.
The java.net.SocketException is thrown when there is an error creating or accessing a socket (such as TCP). This usually can be caused when the server has terminated the connection (without properly closing it), so before getting the full response. In most cases this can be caused either by the timeout issue (e.g. the response takes too much time or server is overloaded with the requests), or the client sent the SYN, but it didn't receive ACK (acknowledgment of the connection termination). For timeout issues, you can consider increasing the timeout value.
The Socket Exception usually comes with the specified detail message about the issue.
Example of detailed messages:
Software caused connection abort: recv failed.
The error indicates an attempt to send the message and the connection has been aborted by your server. If this happened while connecting to the database, this can be related to using not compatible Connector/J JDBC driver.
Possible solution: Make sure you've proper libraries/drivers in your CLASSPATH.
Software caused connection abort: connect.
This can happen when there is a problem to connect to the remote. For example due to virus-checker rejecting the remote mail requests.
Possible solution: Check Virus scan service whether it's blocking the port for the outgoing requests for connections.
Software caused connection abort: socket write error.
Possible solution: Make sure you're writing the correct length of bytes to the stream. So double check what you're sending. See this thread.
Connection reset by peer: socket write error / Connection aborted by peer: socket write error
The application did not check whether keep-alive connection had been timed out on the server side.
Possible solution: Ensure that the HttpClient is non-null before reading from the connection.E13222_01
Connection reset by peer.
The connection has been terminated by the peer (server).
Connection reset.
The connection has been either terminated by the client or closed by the server end of the connection due to request with the request.
See: What's causing my java.net.SocketException: Connection reset?
I have seen this most often when a corporate firewall on a workstation/laptop gets in the way, it kills the connection.
eg. I have a server process and a client process on the same machine. The server is listening on all interfaces (0.0.0.0) and the client attempts a connection to the public/home interface (note not the loopback interface 127.0.0.1).
If the machine is has its network disconnected (eg wifi turned off) then the connection is formed. If the machine is connected to the corporate network (directly or vpn) then the connection is formed.
However, if the machine is connected to a public wifi (or home network) then the firewall kicks in an kills the connection. In this situation connecting the client to the loopback interface works fine, just not to the home/public interface.
Hope this helps.
To prove which component fails I would monitor the TCP/IP communication using wireshark and look who is actaully closing the port, also timeouts could be relevant.
For anyone using simple Client Server programms and getting this error, it is a problem of unclosed (or closed to early) Input or Output Streams.
Have you checked the Tomcat source code and the JVM source ? That may give you more help.
I think your general thinking is good. I would expect a ConnectException in the scenario that you couldn't connect. The above looks very like it's client-driven.
I was facing the same issue.
Commonly This kind of error occurs due to client has closed its connection and server still trying to write on that client.
So make sure that your client has its connection open until server done with its outputstream.
And one more thing, Don`t forgot to close input and output stream.
Hope this helps.
And if still facing issue than brief your problem here in details.
Had an SSLPoke.bat (SSL troubleshooting script) window script that was getting this error despite importing the correct certificates into the cacerts trustore.
C:\Java\jdk1.8.0_111\jre\lib\security>SSLPoke.bat
C:\Java\jdk1.8.0_111\jre\lib\security>"C:\jdk1.8.0_101\jre\bin\java"
`SSLPoke tfs.corp.****.com 443`
java.net.SocketException: Software caused connection abort: recv failed
`at java.net.SocketInputStream.socketRead0(Native Method)`
`at java.net.SocketInputStream.socketRead(SocketInputStream.java:116)`
`at java.net.SocketInputStream.read(SocketInputStream.java:170)`
`at java.net.SocketInputStream.read(SocketInputStream.java:141)`
`at sun.security.ssl.InputRecord.readFully(InputRecord.java:465)`
`at sun.security.ssl.InputRecord.read(InputRecord.java:503)`
`at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:973)`
`at sun.security.ssl.SSLSocketImpl.performInitialHandshake
(SSLSocketImpl.java:1375)`
`at sun.security.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:747)`
`at sun.security.ssl.AppOutputStream.write(AppOutputStream.java:123)`
`at sun.security.ssl.AppOutputStream.write(AppOutputStream.java:138)`
`at SSLPoke.main(SSLPoke.java:28)`
I then checked some old notes about some network changes at my job. We would
need in some cases to add the JVM parameter
-Djava.net.preferIPv4Stack=true to make connections to certain machines
in our network to avoid this error.
C:\Java\jdk1.8.0_111\jre\lib\security>"C:\Java\jdk1.8.0_111\bin\java"
**-Djava.net.preferIPv4Stack=true** SSLPoke tfs.corp.****.com 443
Successfully connected
The code for SSLPoke can be downloaded from here:
https://gist.github.com/4ndrej/4547029
This error happened to me while testing my soap service with SoapUI client, basically I was trying to get a very big message (>500kb) and SoapUI closed the connection by timeout.
On SoapUI go to:
File-->Preferences--Socket Timeout(ms)
...and put a large value, such as 180000 (3 minutes), this won't be the perfect fix for your issue because the file is in fact to large, but at least you will have a response.
Closed connection in another client
In my case, the error was:
java.net.SocketException: Software caused connection abort: recv failed
It was received in eclipse while debugging a java application accessing a H2 database. The source of the error was that I had initially opened the database with SQuirreL to check manually for integrity. I did use the flag to enable multiple connections to the same DB (i.e. AUTO_SERVER=TRUE), so there was no problem connecting to the DB from java.
The error appeared when, after a while --it is a long java process-- I decided to close SQuirreL to free resources. It appears as if SQuirreL were the one "owning" the DB server instance and that it was shut down with the SQuirreL connection.
Restarting the Java application did not yield the error again.
config
Windows 7
Eclipse Kepler
SQuirreL 3.6
org.h2.Driver ver 1.4.192
In the situation explained below, client side will throw such an exception:
The server is asked to authenticate client certificate, but the client provides a certificate which Extended Key Usage doesn't support client auth, so the server doesn't accept the client's certificate, and then it closes the connection.
My server was throwing this exception in the pass 2 days and I solved it by moving the disconnecting function with:
outputStream.close();
inputStream.close();
Client.close();
To the end of the listing thread.
if it will helped anyone.
In my case, I developped the client and the server side, and I have the exception :
Cause : error marshalling arguments; nested exception is:
java.net.SocketException: Software caused connection abort: socket
write error
when classes in client and server are different. I don't download server's classes (Interfaces) on the client, I juste add same files in the project.
But the path must be exactly the same.
For example, on the server project I have java\rmi\services packages with some serviceInterface and implementations, I have to create the same package on the client project. If I change it by java/rmi/server/services for example, I get the above exception.
Same exception if the interface version is different between client and server (even with an empty row added inadvertently ... I think rmi makes a sort of hash of classes to check version ... I don't know...
If it could help ...
I was facing the same problem with wireMock while mocking the rest API calls.
Earlier I was defining the server like this:
WireMockServer wireMockServer = null;
But it should be defined like as shown below:
#Rule
public WireMockRule wireMockRule = new WireMockRule(8089);
Given this stack trace snippet
Caused by: java.net.SocketException:
Software caused connection abort:
socket write error at
java.net.SocketOutputStream.socketWrite0(Native
Method)
I tried to answer the following questions:
What code is throwing this exception? (JVM?/Tomcat?/My code?)
What causes this exception to be thrown?
Regarding #1:
Sun's JVM source doesn't contain this exact message, but I think the text Software caused connection abort: socket write error is from the native implementation of SocketOutputStream:
private native void socketWrite0(FileDescriptor fd, byte[] b, int off,
int len) throws IOException;
Regarding #2
My guess is that it is caused when the client has terminated the connection, before getting the full response (e.g. sent a request, but before getting the full response, it got closed / terminated / offline)
Questions:
Are the above assumptions correct (#1 and #2)?
Can this be diffrentiated from the situation: "could not write to the client, due to a network error on the server side"? or would that render the same error message?
And most important: Is there an official document (e.g from Sun) stating the above?
I need to have a proof that this stack trace is the socket client's "fault", and there is nothing that the server could have done to avoid it. (except catching the exception, or using a non Sun JVM SocketOutputStream, though both don't really avoid the fact the client has terminated)
This error can occur when the local network system aborts a
connection, such as when WinSock closes an established connection
after data retransmission fails (receiver never acknowledges data sent
on a datastream socket).
See this MSDN article. See also Some information about 'Software caused connection abort'.
The java.net.SocketException is thrown when there is an error creating or accessing a socket (such as TCP). This usually can be caused when the server has terminated the connection (without properly closing it), so before getting the full response. In most cases this can be caused either by the timeout issue (e.g. the response takes too much time or server is overloaded with the requests), or the client sent the SYN, but it didn't receive ACK (acknowledgment of the connection termination). For timeout issues, you can consider increasing the timeout value.
The Socket Exception usually comes with the specified detail message about the issue.
Example of detailed messages:
Software caused connection abort: recv failed.
The error indicates an attempt to send the message and the connection has been aborted by your server. If this happened while connecting to the database, this can be related to using not compatible Connector/J JDBC driver.
Possible solution: Make sure you've proper libraries/drivers in your CLASSPATH.
Software caused connection abort: connect.
This can happen when there is a problem to connect to the remote. For example due to virus-checker rejecting the remote mail requests.
Possible solution: Check Virus scan service whether it's blocking the port for the outgoing requests for connections.
Software caused connection abort: socket write error.
Possible solution: Make sure you're writing the correct length of bytes to the stream. So double check what you're sending. See this thread.
Connection reset by peer: socket write error / Connection aborted by peer: socket write error
The application did not check whether keep-alive connection had been timed out on the server side.
Possible solution: Ensure that the HttpClient is non-null before reading from the connection.E13222_01
Connection reset by peer.
The connection has been terminated by the peer (server).
Connection reset.
The connection has been either terminated by the client or closed by the server end of the connection due to request with the request.
See: What's causing my java.net.SocketException: Connection reset?
I have seen this most often when a corporate firewall on a workstation/laptop gets in the way, it kills the connection.
eg. I have a server process and a client process on the same machine. The server is listening on all interfaces (0.0.0.0) and the client attempts a connection to the public/home interface (note not the loopback interface 127.0.0.1).
If the machine is has its network disconnected (eg wifi turned off) then the connection is formed. If the machine is connected to the corporate network (directly or vpn) then the connection is formed.
However, if the machine is connected to a public wifi (or home network) then the firewall kicks in an kills the connection. In this situation connecting the client to the loopback interface works fine, just not to the home/public interface.
Hope this helps.
To prove which component fails I would monitor the TCP/IP communication using wireshark and look who is actaully closing the port, also timeouts could be relevant.
For anyone using simple Client Server programms and getting this error, it is a problem of unclosed (or closed to early) Input or Output Streams.
Have you checked the Tomcat source code and the JVM source ? That may give you more help.
I think your general thinking is good. I would expect a ConnectException in the scenario that you couldn't connect. The above looks very like it's client-driven.
I was facing the same issue.
Commonly This kind of error occurs due to client has closed its connection and server still trying to write on that client.
So make sure that your client has its connection open until server done with its outputstream.
And one more thing, Don`t forgot to close input and output stream.
Hope this helps.
And if still facing issue than brief your problem here in details.
Had an SSLPoke.bat (SSL troubleshooting script) window script that was getting this error despite importing the correct certificates into the cacerts trustore.
C:\Java\jdk1.8.0_111\jre\lib\security>SSLPoke.bat
C:\Java\jdk1.8.0_111\jre\lib\security>"C:\jdk1.8.0_101\jre\bin\java"
`SSLPoke tfs.corp.****.com 443`
java.net.SocketException: Software caused connection abort: recv failed
`at java.net.SocketInputStream.socketRead0(Native Method)`
`at java.net.SocketInputStream.socketRead(SocketInputStream.java:116)`
`at java.net.SocketInputStream.read(SocketInputStream.java:170)`
`at java.net.SocketInputStream.read(SocketInputStream.java:141)`
`at sun.security.ssl.InputRecord.readFully(InputRecord.java:465)`
`at sun.security.ssl.InputRecord.read(InputRecord.java:503)`
`at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:973)`
`at sun.security.ssl.SSLSocketImpl.performInitialHandshake
(SSLSocketImpl.java:1375)`
`at sun.security.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:747)`
`at sun.security.ssl.AppOutputStream.write(AppOutputStream.java:123)`
`at sun.security.ssl.AppOutputStream.write(AppOutputStream.java:138)`
`at SSLPoke.main(SSLPoke.java:28)`
I then checked some old notes about some network changes at my job. We would
need in some cases to add the JVM parameter
-Djava.net.preferIPv4Stack=true to make connections to certain machines
in our network to avoid this error.
C:\Java\jdk1.8.0_111\jre\lib\security>"C:\Java\jdk1.8.0_111\bin\java"
**-Djava.net.preferIPv4Stack=true** SSLPoke tfs.corp.****.com 443
Successfully connected
The code for SSLPoke can be downloaded from here:
https://gist.github.com/4ndrej/4547029
This error happened to me while testing my soap service with SoapUI client, basically I was trying to get a very big message (>500kb) and SoapUI closed the connection by timeout.
On SoapUI go to:
File-->Preferences--Socket Timeout(ms)
...and put a large value, such as 180000 (3 minutes), this won't be the perfect fix for your issue because the file is in fact to large, but at least you will have a response.
Closed connection in another client
In my case, the error was:
java.net.SocketException: Software caused connection abort: recv failed
It was received in eclipse while debugging a java application accessing a H2 database. The source of the error was that I had initially opened the database with SQuirreL to check manually for integrity. I did use the flag to enable multiple connections to the same DB (i.e. AUTO_SERVER=TRUE), so there was no problem connecting to the DB from java.
The error appeared when, after a while --it is a long java process-- I decided to close SQuirreL to free resources. It appears as if SQuirreL were the one "owning" the DB server instance and that it was shut down with the SQuirreL connection.
Restarting the Java application did not yield the error again.
config
Windows 7
Eclipse Kepler
SQuirreL 3.6
org.h2.Driver ver 1.4.192
In the situation explained below, client side will throw such an exception:
The server is asked to authenticate client certificate, but the client provides a certificate which Extended Key Usage doesn't support client auth, so the server doesn't accept the client's certificate, and then it closes the connection.
My server was throwing this exception in the pass 2 days and I solved it by moving the disconnecting function with:
outputStream.close();
inputStream.close();
Client.close();
To the end of the listing thread.
if it will helped anyone.
In my case, I developped the client and the server side, and I have the exception :
Cause : error marshalling arguments; nested exception is:
java.net.SocketException: Software caused connection abort: socket
write error
when classes in client and server are different. I don't download server's classes (Interfaces) on the client, I juste add same files in the project.
But the path must be exactly the same.
For example, on the server project I have java\rmi\services packages with some serviceInterface and implementations, I have to create the same package on the client project. If I change it by java/rmi/server/services for example, I get the above exception.
Same exception if the interface version is different between client and server (even with an empty row added inadvertently ... I think rmi makes a sort of hash of classes to check version ... I don't know...
If it could help ...
I was facing the same problem with wireMock while mocking the rest API calls.
Earlier I was defining the server like this:
WireMockServer wireMockServer = null;
But it should be defined like as shown below:
#Rule
public WireMockRule wireMockRule = new WireMockRule(8089);
In Eclipse,
"org.apache.axis2.AxisFault: Transport error: 403 Error: Forbidden"
Error occured while trying to check out a project from svn.
I colud not achieve this error and therefore I checked out the project from terminal using "svn -co" command.
But, the funny side is that, when I try to run the application from within Eclipse, I've faced w/ same error again right after I entered my credentials (username and passwd) and pressed "Login" button. The response was Invalid username/password on the JFrame, but credentials was not wrong.
This happens only in Eclipse. I can access SVN through web browser with same credentials.
And I set proxies same as web browser.
I am not able to overcome this situation furthermore.
As to give info, I am on a virtual machine(MAC OS X Lion) through win7
Please provide some solutions to me asap.
Thanks.
Here is the full stack-trace :
org.apache.axis2.AxisFault: Transport error: 403 Error: Tunnel or SSL Forbidden
at org.apache.axis2.transport.http.HTTPSender.handleResponse(HTTPSender.java:310)
~[axis2-transport-http-1.6.2.jar:na]
at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:194)
~[axis2-transport-http-1.6.2.jar:na]
at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75)
~[axis2-transport-http-1.6.2.jar:na]
atorg.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:404)
~[axis2-transport-http-1.6.2.jar:na]
at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:231)
~[axis2-transport-http-1.6.2.jar:na]
at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:443)
~[axis2-1.6.2.jar:na]
at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:406)
~[axis2-1.6.2.jar:na]
at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
~[axis2-1.6.2.jar:na]
at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
~[axis2-1.6.2.jar:na]
at org.apache.axis2.client.ServiceClient.sendReceive(ServiceClient.java:555)
~[axis2-1.6.2.jar:na]
at org.apache.rahas.client.STSClient.requestSecurityToken(STSClient.java:154)
~[rampart-trust-1.6.2.jar:1.6.2]
at tr.org.abc.sts.client.ESBSTSClient.issueToken(ESBSTSClient.java:103)
[ServiceClient-1.1.0.7-SNAPSHOT.jar:na]
at tr.org.abc.sts.client.ESBSTSClient.validateUser(ESBSTSClient.java:92)
[ServiceClient-1.1.0.7-SNAPSHOT.jar:na]
I see this post is from a while ago. Not sure if you have resolved it yet.
I had a similar situation today with the same error via Eclipse, but it was on an app calling a SOAP WS endpoint through SSL, instead of SVN.
On further debugging, I found that was indeed the problem - null or wrong credentials. I would suggest you look back into your login credentials, SVN connectivity and other environmental issues with a notion that your credentials aren't reaching the SVN server.
"org.apache.axis2.AxisFault: Transport error: 403 Error: Forbidden"
Error occured while trying to check out a project from svn.
Are you trying to checkout a project from SVN server using Axis2?
From Wikipedia:
Apache HTTP Server as network server, WebDAV/Delta-V for protocol.
There is also an independent server process called svnserve that uses
a custom protocol over TCP/IP.
Apache Axis2 is designed for working with Web Services / SOAP / WSDL engine (client, server) is not intended for WebDAV services.
If you only want to checkout a project from a WebDAV SVN server in eclipse you can use Subversive with SVNKit. If you are developing a SVN client to perform operations like checkout you can use a Java library like SVNKit or JSVN, both have an implementation of authenticators to login and work with SVN servers.
Given this stack trace snippet
Caused by: java.net.SocketException:
Software caused connection abort:
socket write error at
java.net.SocketOutputStream.socketWrite0(Native
Method)
I tried to answer the following questions:
What code is throwing this exception? (JVM?/Tomcat?/My code?)
What causes this exception to be thrown?
Regarding #1:
Sun's JVM source doesn't contain this exact message, but I think the text Software caused connection abort: socket write error is from the native implementation of SocketOutputStream:
private native void socketWrite0(FileDescriptor fd, byte[] b, int off,
int len) throws IOException;
Regarding #2
My guess is that it is caused when the client has terminated the connection, before getting the full response (e.g. sent a request, but before getting the full response, it got closed / terminated / offline)
Questions:
Are the above assumptions correct (#1 and #2)?
Can this be diffrentiated from the situation: "could not write to the client, due to a network error on the server side"? or would that render the same error message?
And most important: Is there an official document (e.g from Sun) stating the above?
I need to have a proof that this stack trace is the socket client's "fault", and there is nothing that the server could have done to avoid it. (except catching the exception, or using a non Sun JVM SocketOutputStream, though both don't really avoid the fact the client has terminated)
This error can occur when the local network system aborts a
connection, such as when WinSock closes an established connection
after data retransmission fails (receiver never acknowledges data sent
on a datastream socket).
See this MSDN article. See also Some information about 'Software caused connection abort'.
The java.net.SocketException is thrown when there is an error creating or accessing a socket (such as TCP). This usually can be caused when the server has terminated the connection (without properly closing it), so before getting the full response. In most cases this can be caused either by the timeout issue (e.g. the response takes too much time or server is overloaded with the requests), or the client sent the SYN, but it didn't receive ACK (acknowledgment of the connection termination). For timeout issues, you can consider increasing the timeout value.
The Socket Exception usually comes with the specified detail message about the issue.
Example of detailed messages:
Software caused connection abort: recv failed.
The error indicates an attempt to send the message and the connection has been aborted by your server. If this happened while connecting to the database, this can be related to using not compatible Connector/J JDBC driver.
Possible solution: Make sure you've proper libraries/drivers in your CLASSPATH.
Software caused connection abort: connect.
This can happen when there is a problem to connect to the remote. For example due to virus-checker rejecting the remote mail requests.
Possible solution: Check Virus scan service whether it's blocking the port for the outgoing requests for connections.
Software caused connection abort: socket write error.
Possible solution: Make sure you're writing the correct length of bytes to the stream. So double check what you're sending. See this thread.
Connection reset by peer: socket write error / Connection aborted by peer: socket write error
The application did not check whether keep-alive connection had been timed out on the server side.
Possible solution: Ensure that the HttpClient is non-null before reading from the connection.E13222_01
Connection reset by peer.
The connection has been terminated by the peer (server).
Connection reset.
The connection has been either terminated by the client or closed by the server end of the connection due to request with the request.
See: What's causing my java.net.SocketException: Connection reset?
I have seen this most often when a corporate firewall on a workstation/laptop gets in the way, it kills the connection.
eg. I have a server process and a client process on the same machine. The server is listening on all interfaces (0.0.0.0) and the client attempts a connection to the public/home interface (note not the loopback interface 127.0.0.1).
If the machine is has its network disconnected (eg wifi turned off) then the connection is formed. If the machine is connected to the corporate network (directly or vpn) then the connection is formed.
However, if the machine is connected to a public wifi (or home network) then the firewall kicks in an kills the connection. In this situation connecting the client to the loopback interface works fine, just not to the home/public interface.
Hope this helps.
To prove which component fails I would monitor the TCP/IP communication using wireshark and look who is actaully closing the port, also timeouts could be relevant.
For anyone using simple Client Server programms and getting this error, it is a problem of unclosed (or closed to early) Input or Output Streams.
Have you checked the Tomcat source code and the JVM source ? That may give you more help.
I think your general thinking is good. I would expect a ConnectException in the scenario that you couldn't connect. The above looks very like it's client-driven.
I was facing the same issue.
Commonly This kind of error occurs due to client has closed its connection and server still trying to write on that client.
So make sure that your client has its connection open until server done with its outputstream.
And one more thing, Don`t forgot to close input and output stream.
Hope this helps.
And if still facing issue than brief your problem here in details.
Had an SSLPoke.bat (SSL troubleshooting script) window script that was getting this error despite importing the correct certificates into the cacerts trustore.
C:\Java\jdk1.8.0_111\jre\lib\security>SSLPoke.bat
C:\Java\jdk1.8.0_111\jre\lib\security>"C:\jdk1.8.0_101\jre\bin\java"
`SSLPoke tfs.corp.****.com 443`
java.net.SocketException: Software caused connection abort: recv failed
`at java.net.SocketInputStream.socketRead0(Native Method)`
`at java.net.SocketInputStream.socketRead(SocketInputStream.java:116)`
`at java.net.SocketInputStream.read(SocketInputStream.java:170)`
`at java.net.SocketInputStream.read(SocketInputStream.java:141)`
`at sun.security.ssl.InputRecord.readFully(InputRecord.java:465)`
`at sun.security.ssl.InputRecord.read(InputRecord.java:503)`
`at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:973)`
`at sun.security.ssl.SSLSocketImpl.performInitialHandshake
(SSLSocketImpl.java:1375)`
`at sun.security.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:747)`
`at sun.security.ssl.AppOutputStream.write(AppOutputStream.java:123)`
`at sun.security.ssl.AppOutputStream.write(AppOutputStream.java:138)`
`at SSLPoke.main(SSLPoke.java:28)`
I then checked some old notes about some network changes at my job. We would
need in some cases to add the JVM parameter
-Djava.net.preferIPv4Stack=true to make connections to certain machines
in our network to avoid this error.
C:\Java\jdk1.8.0_111\jre\lib\security>"C:\Java\jdk1.8.0_111\bin\java"
**-Djava.net.preferIPv4Stack=true** SSLPoke tfs.corp.****.com 443
Successfully connected
The code for SSLPoke can be downloaded from here:
https://gist.github.com/4ndrej/4547029
This error happened to me while testing my soap service with SoapUI client, basically I was trying to get a very big message (>500kb) and SoapUI closed the connection by timeout.
On SoapUI go to:
File-->Preferences--Socket Timeout(ms)
...and put a large value, such as 180000 (3 minutes), this won't be the perfect fix for your issue because the file is in fact to large, but at least you will have a response.
Closed connection in another client
In my case, the error was:
java.net.SocketException: Software caused connection abort: recv failed
It was received in eclipse while debugging a java application accessing a H2 database. The source of the error was that I had initially opened the database with SQuirreL to check manually for integrity. I did use the flag to enable multiple connections to the same DB (i.e. AUTO_SERVER=TRUE), so there was no problem connecting to the DB from java.
The error appeared when, after a while --it is a long java process-- I decided to close SQuirreL to free resources. It appears as if SQuirreL were the one "owning" the DB server instance and that it was shut down with the SQuirreL connection.
Restarting the Java application did not yield the error again.
config
Windows 7
Eclipse Kepler
SQuirreL 3.6
org.h2.Driver ver 1.4.192
In the situation explained below, client side will throw such an exception:
The server is asked to authenticate client certificate, but the client provides a certificate which Extended Key Usage doesn't support client auth, so the server doesn't accept the client's certificate, and then it closes the connection.
My server was throwing this exception in the pass 2 days and I solved it by moving the disconnecting function with:
outputStream.close();
inputStream.close();
Client.close();
To the end of the listing thread.
if it will helped anyone.
In my case, I developped the client and the server side, and I have the exception :
Cause : error marshalling arguments; nested exception is:
java.net.SocketException: Software caused connection abort: socket
write error
when classes in client and server are different. I don't download server's classes (Interfaces) on the client, I juste add same files in the project.
But the path must be exactly the same.
For example, on the server project I have java\rmi\services packages with some serviceInterface and implementations, I have to create the same package on the client project. If I change it by java/rmi/server/services for example, I get the above exception.
Same exception if the interface version is different between client and server (even with an empty row added inadvertently ... I think rmi makes a sort of hash of classes to check version ... I don't know...
If it could help ...
I was facing the same problem with wireMock while mocking the rest API calls.
Earlier I was defining the server like this:
WireMockServer wireMockServer = null;
But it should be defined like as shown below:
#Rule
public WireMockRule wireMockRule = new WireMockRule(8089);