Related
Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
My code runs inside a JAR file, say foo.jar, and I need to know, in the code, in which folder the running foo.jar is.
So, if foo.jar is in C:\FOO\, I want to get that path no matter what my current working directory is.
return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
Replace "MyClass" with the name of your class.
Obviously, this will do odd things if your class was loaded from a non-file location.
Best solution for me:
String path = Test.class.getProtectionDomain().getCodeSource().getLocation().getPath();
String decodedPath = URLDecoder.decode(path, "UTF-8");
This should solve the problem with spaces and special characters.
To obtain the File for a given Class, there are two steps:
Convert the Class to a URL
Convert the URL to a File
It is important to understand both steps, and not conflate them.
Once you have the File, you can call getParentFile to get the containing folder, if that is what you need.
Step 1: Class to URL
As discussed in other answers, there are two major ways to find a URL relevant to a Class.
URL url = Bar.class.getProtectionDomain().getCodeSource().getLocation();
URL url = Bar.class.getResource(Bar.class.getSimpleName() + ".class");
Both have pros and cons.
The getProtectionDomain approach yields the base location of the class (e.g., the containing JAR file). However, it is possible that the Java runtime's security policy will throw SecurityException when calling getProtectionDomain(), so if your application needs to run in a variety of environments, it is best to test in all of them.
The getResource approach yields the full URL resource path of the class, from which you will need to perform additional string manipulation. It may be a file: path, but it could also be jar:file: or even something nastier like bundleresource://346.fwk2106232034:4/foo/Bar.class when executing within an OSGi framework. Conversely, the getProtectionDomain approach correctly yields a file: URL even from within OSGi.
Note that both getResource("") and getResource(".") failed in my tests, when the class resided within a JAR file; both invocations returned null. So I recommend the #2 invocation shown above instead, as it seems safer.
Step 2: URL to File
Either way, once you have a URL, the next step is convert to a File. This is its own challenge; see Kohsuke Kawaguchi's blog post about it for full details, but in short, you can use new File(url.toURI()) as long as the URL is completely well-formed.
Lastly, I would highly discourage using URLDecoder. Some characters of the URL, : and / in particular, are not valid URL-encoded characters. From the URLDecoder Javadoc:
It is assumed that all characters in the encoded string are one of the following: "a" through "z", "A" through "Z", "0" through "9", and "-", "_", ".", and "*". The character "%" is allowed but is interpreted as the start of a special escaped sequence.
...
There are two possible ways in which this decoder could deal with illegal strings. It could either leave illegal characters alone or it could throw an IllegalArgumentException. Which approach the decoder takes is left to the implementation.
In practice, URLDecoder generally does not throw IllegalArgumentException as threatened above. And if your file path has spaces encoded as %20, this approach may appear to work. However, if your file path has other non-alphameric characters such as + you will have problems with URLDecoder mangling your file path.
Working code
To achieve these steps, you might have methods like the following:
/**
* Gets the base location of the given class.
* <p>
* If the class is directly on the file system (e.g.,
* "/path/to/my/package/MyClass.class") then it will return the base directory
* (e.g., "file:/path/to").
* </p>
* <p>
* If the class is within a JAR file (e.g.,
* "/path/to/my-jar.jar!/my/package/MyClass.class") then it will return the
* path to the JAR (e.g., "file:/path/to/my-jar.jar").
* </p>
*
* #param c The class whose location is desired.
* #see FileUtils#urlToFile(URL) to convert the result to a {#link File}.
*/
public static URL getLocation(final Class<?> c) {
if (c == null) return null; // could not load the class
// try the easy way first
try {
final URL codeSourceLocation =
c.getProtectionDomain().getCodeSource().getLocation();
if (codeSourceLocation != null) return codeSourceLocation;
}
catch (final SecurityException e) {
// NB: Cannot access protection domain.
}
catch (final NullPointerException e) {
// NB: Protection domain or code source is null.
}
// NB: The easy way failed, so we try the hard way. We ask for the class
// itself as a resource, then strip the class's path from the URL string,
// leaving the base path.
// get the class's raw resource path
final URL classResource = c.getResource(c.getSimpleName() + ".class");
if (classResource == null) return null; // cannot find class resource
final String url = classResource.toString();
final String suffix = c.getCanonicalName().replace('.', '/') + ".class";
if (!url.endsWith(suffix)) return null; // weird URL
// strip the class's path from the URL string
final String base = url.substring(0, url.length() - suffix.length());
String path = base;
// remove the "jar:" prefix and "!/" suffix, if present
if (path.startsWith("jar:")) path = path.substring(4, path.length() - 2);
try {
return new URL(path);
}
catch (final MalformedURLException e) {
e.printStackTrace();
return null;
}
}
/**
* Converts the given {#link URL} to its corresponding {#link File}.
* <p>
* This method is similar to calling {#code new File(url.toURI())} except that
* it also handles "jar:file:" URLs, returning the path to the JAR file.
* </p>
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final URL url) {
return url == null ? null : urlToFile(url.toString());
}
/**
* Converts the given URL string to its corresponding {#link File}.
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final String url) {
String path = url;
if (path.startsWith("jar:")) {
// remove "jar:" prefix and "!/" suffix
final int index = path.indexOf("!/");
path = path.substring(4, index);
}
try {
if (PlatformUtils.isWindows() && path.matches("file:[A-Za-z]:.*")) {
path = "file:/" + path.substring(5);
}
return new File(new URL(path).toURI());
}
catch (final MalformedURLException e) {
// NB: URL is not completely well-formed.
}
catch (final URISyntaxException e) {
// NB: URL is not completely well-formed.
}
if (path.startsWith("file:")) {
// pass through the URL as-is, minus "file:" prefix
path = path.substring(5);
return new File(path);
}
throw new IllegalArgumentException("Invalid URL: " + url);
}
You can find these methods in the SciJava Common library:
org.scijava.util.ClassUtils
org.scijava.util.FileUtils.
You can also use:
CodeSource codeSource = YourMainClass.class.getProtectionDomain().getCodeSource();
File jarFile = new File(codeSource.getLocation().toURI().getPath());
String jarDir = jarFile.getParentFile().getPath();
Use ClassLoader.getResource() to find the URL for your current class.
For example:
package foo;
public class Test
{
public static void main(String[] args)
{
ClassLoader loader = Test.class.getClassLoader();
System.out.println(loader.getResource("foo/Test.class"));
}
}
(This example taken from a similar question.)
To find the directory, you'd then need to take apart the URL manually. See the JarClassLoader tutorial for the format of a jar URL.
I'm surprised to see that none recently proposed to use Path. Here follows a citation: "The Path class includes various methods that can be used to obtain information about the path, access elements of the path, convert the path to other forms, or extract portions of a path"
Thus, a good alternative is to get the Path objest as:
Path path = Paths.get(Test.class.getProtectionDomain().getCodeSource().getLocation().toURI());
The only solution that works for me on Linux, Mac and Windows:
public static String getJarContainingFolder(Class aclass) throws Exception {
CodeSource codeSource = aclass.getProtectionDomain().getCodeSource();
File jarFile;
if (codeSource.getLocation() != null) {
jarFile = new File(codeSource.getLocation().toURI());
}
else {
String path = aclass.getResource(aclass.getSimpleName() + ".class").getPath();
String jarFilePath = path.substring(path.indexOf(":") + 1, path.indexOf("!"));
jarFilePath = URLDecoder.decode(jarFilePath, "UTF-8");
jarFile = new File(jarFilePath);
}
return jarFile.getParentFile().getAbsolutePath();
}
If you are really looking for a simple way to get the folder in which your JAR is located you should use this implementation.
Solutions like this are hard to find and many solutions are no longer supported, many others provide the path of the file instead of the actual directory. This is easier than other solutions you are going to find and works for java version 1.12.
new File(".").getCanonicalPath()
Gathering the Input from other answers this is a simple one too:
String localPath=new File(getClass().getProtectionDomain().getCodeSource().getLocation().toURI()).getParentFile().getPath()+"\\";
Both will return a String with this format:
"C:\Users\User\Desktop\Folder\"
In a simple and concise line.
I had the the same problem and I solved it that way:
File currentJavaJarFile = new File(Main.class.getProtectionDomain().getCodeSource().getLocation().getPath());
String currentJavaJarFilePath = currentJavaJarFile.getAbsolutePath();
String currentRootDirectoryPath = currentJavaJarFilePath.replace(currentJavaJarFile.getName(), "");
I hope I was of help to you.
Here's upgrade to other comments, that seem to me incomplete for the specifics of
using a relative "folder" outside .jar file (in the jar's same
location):
String path =
YourMainClassName.class.getProtectionDomain().
getCodeSource().getLocation().getPath();
path =
URLDecoder.decode(
path,
"UTF-8");
BufferedImage img =
ImageIO.read(
new File((
new File(path).getParentFile().getPath()) +
File.separator +
"folder" +
File.separator +
"yourfile.jpg"));
For getting the path of running jar file I have studied the above solutions and tried all methods which exist some difference each other. If these code are running in Eclipse IDE they all should be able to find the path of the file including the indicated class and open or create an indicated file with the found path.
But it is tricky, when run the runnable jar file directly or through the command line, it will be failed as the path of jar file gotten from the above methods will give an internal path in the jar file, that is it always gives a path as
rsrc:project-name (maybe I should say that it is the package name of the main class file - the indicated class)
I can not convert the rsrc:... path to an external path, that is when run the jar file outside the Eclipse IDE it can not get the path of jar file.
The only possible way for getting the path of running jar file outside Eclipse IDE is
System.getProperty("java.class.path")
this code line may return the living path (including the file name) of the running jar file (note that the return path is not the working directory), as the java document and some people said that it will return the paths of all class files in the same directory, but as my tests if in the same directory include many jar files, it only return the path of running jar (about the multiple paths issue indeed it happened in the Eclipse).
Other answers seem to point to the code source which is Jar file location which is not a directory.
Use
return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation().toURI().getPath()).getParentFile();
the selected answer above is not working if you run your jar by click on it from Gnome desktop environment (not from any script or terminal).
Instead, I have fond that the following solution is working everywhere:
try {
return URLDecoder.decode(ClassLoader.getSystemClassLoader().getResource(".").getPath(), "UTF-8");
} catch (UnsupportedEncodingException e) {
return "";
}
I had to mess around a lot before I finally found a working (and short) solution.
It is possible that the jarLocation comes with a prefix like file:\ or jar:file\, which can be removed by using String#substring().
URL jarLocationUrl = MyClass.class.getProtectionDomain().getCodeSource().getLocation();
String jarLocation = new File(jarLocationUrl.toString()).getParent();
For the jar file path:
String jarPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
For getting the directory path of that jar file:
String dirPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getParent();
The results of the two lines above are like this:
/home/user/MyPrograms/myapp/myjar.jar (value of jarPath)
/home/user/MyPrograms/myapp (value of dirPath)
public static String dir() throws URISyntaxException
{
URI path=Main.class.getProtectionDomain().getCodeSource().getLocation().toURI();
String name= Main.class.getPackage().getName()+".jar";
String path2 = path.getRawPath();
path2=path2.substring(1);
if (path2.contains(".jar"))
{
path2=path2.replace(name, "");
}
return path2;}
Works good on Windows
I tried to get the jar running path using
String folder = MyClassName.class.getProtectionDomain().getCodeSource().getLocation().getPath();
c:\app>java -jar application.jar
Running the jar application named "application.jar", on Windows in the folder "c:\app", the value of the String variable "folder" was "\c:\app\application.jar" and I had problems testing for path's correctness
File test = new File(folder);
if(file.isDirectory() && file.canRead()) { //always false }
So I tried to define "test" as:
String fold= new File(folder).getParentFile().getPath()
File test = new File(fold);
to get path in a right format like "c:\app" instead of "\c:\app\application.jar" and I noticed that it work.
The simplest solution is to pass the path as an argument when running the jar.
You can automate this with a shell script (.bat in Windows, .sh anywhere else):
java -jar my-jar.jar .
I used . to pass the current working directory.
UPDATE
You may want to stick the jar file in a sub-directory so users don't accidentally click it. Your code should also check to make sure that the command line arguments have been supplied, and provide a good error message if the arguments are missing.
Actually here is a better version - the old one failed if a folder name had a space in it.
private String getJarFolder() {
// get name and path
String name = getClass().getName().replace('.', '/');
name = getClass().getResource("/" + name + ".class").toString();
// remove junk
name = name.substring(0, name.indexOf(".jar"));
name = name.substring(name.lastIndexOf(':')-1, name.lastIndexOf('/')+1).replace('%', ' ');
// remove escape characters
String s = "";
for (int k=0; k<name.length(); k++) {
s += name.charAt(k);
if (name.charAt(k) == ' ') k += 2;
}
// replace '/' with system separator char
return s.replace('/', File.separatorChar);
}
As for failing with applets, you wouldn't usually have access to local files anyway. I don't know much about JWS but to handle local files might it not be possible to download the app.?
String path = getClass().getResource("").getPath();
The path always refers to the resource within the jar file.
Try this:
String path = new File("").getAbsolutePath();
This code worked for me to identify if the program is being executed inside a JAR file or IDE:
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
If I need to get the Windows full path of JAR file I am using this method:
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
log.error("Error getting JAR path.", e);
return null;
}
}
My complete code working with a Spring Boot application using CommandLineRunner implementation, to ensure that the application always be executed within of a console view (Double clicks by mistake in JAR file name), I am using the next code:
#SpringBootApplication
public class Application implements CommandLineRunner {
public static void main(String[] args) throws IOException {
Console console = System.console();
if (console == null && !GraphicsEnvironment.isHeadless() && isRunningOverJar()) {
Runtime.getRuntime().exec(new String[]{"cmd", "/c", "start", "cmd", "/k",
"java -jar \"" + getPathJar() + "\""});
} else {
SpringApplication.run(Application.class, args);
}
}
#Override
public void run(String... args) {
/*
Additional code here...
*/
}
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
return null;
}
}
}
Something that is frustrating is that when you are developing in Eclipse MyClass.class.getProtectionDomain().getCodeSource().getLocation() returns the /bin directory which is great, but when you compile it to a jar, the path includes the /myjarname.jar part which gives you illegal file names.
To have the code work both in the ide and once it is compiled to a jar, I use the following piece of code:
URL applicationRootPathURL = getClass().getProtectionDomain().getCodeSource().getLocation();
File applicationRootPath = new File(applicationRootPathURL.getPath());
File myFile;
if(applicationRootPath.isDirectory()){
myFile = new File(applicationRootPath, "filename");
}
else{
myFile = new File(applicationRootPath.getParentFile(), "filename");
}
Not really sure about the others but in my case it didn't work with a "Runnable jar" and i got it working by fixing codes together from phchen2 answer and another from this link :How to get the path of a running JAR file?
The code:
String path=new java.io.File(Server.class.getProtectionDomain()
.getCodeSource()
.getLocation()
.getPath())
.getAbsolutePath();
path=path.substring(0, path.lastIndexOf("."));
path=path+System.getProperty("java.class.path");
Have tried several of the solutions up there but none yielded correct results for the (probably special) case that the runnable jar has been exported with "Packaging external libraries" in Eclipse. For some reason all solutions based on the ProtectionDomain do result in null in that case.
From combining some solutions above I managed to achieve the following working code:
String surroundingJar = null;
// gets the path to the jar file if it exists; or the "bin" directory if calling from Eclipse
String jarDir = new File(ClassLoader.getSystemClassLoader().getResource(".").getPath()).getAbsolutePath();
// gets the "bin" directory if calling from eclipse or the name of the .jar file alone (without its path)
String jarFileFromSys = System.getProperty("java.class.path").split(";")[0];
// If both are equal that means it is running from an IDE like Eclipse
if (jarFileFromSys.equals(jarDir))
{
System.out.println("RUNNING FROM IDE!");
// The path to the jar is the "bin" directory in that case because there is no actual .jar file.
surroundingJar = jarDir;
}
else
{
// Combining the path and the name of the .jar file to achieve the final result
surroundingJar = jarDir + jarFileFromSys.substring(1);
}
System.out.println("JAR File: " + surroundingJar);
The above methods didn't work for me in my Spring environment, since Spring shades the actual classes into a package called BOOT-INF, thus not the actual location of the running file. I found another way to retrieve the running file through the Permissions object which have been granted to the running file:
public static Path getEnclosingDirectory() {
return Paths.get(FileUtils.class.getProtectionDomain().getPermissions()
.elements().nextElement().getName()).getParent();
}
Mention that it is checked only in Windows but i think it works perfect on other Operating Systems [Linux,MacOs,Solaris] :).
I had 2 .jar files in the same directory . I wanted from the one .jar file to start the other .jar file which is in the same directory.
The problem is that when you start it from the cmd the current directory is system32.
Warnings!
The below seems to work pretty well in all the test i have done even
with folder name ;][[;'57f2g34g87-8+9-09!2##!$%^^&() or ()%&$%^##
it works well.
I am using the ProcessBuilder with the below as following:
🍂..
//The class from which i called this was the class `Main`
String path = getBasePathForClass(Main.class);
String applicationPath= new File(path + "application.jar").getAbsolutePath();
System.out.println("Directory Path is : "+applicationPath);
//Your know try catch here
//Mention that sometimes it doesn't work for example with folder `;][[;'57f2g34g87-8+9-09!2##!$%^^&()`
ProcessBuilder builder = new ProcessBuilder("java", "-jar", applicationPath);
builder.redirectErrorStream(true);
Process process = builder.start();
//...code
🍂getBasePathForClass(Class<?> classs):
/**
* Returns the absolute path of the current directory in which the given
* class
* file is.
*
* #param classs
* #return The absolute path of the current directory in which the class
* file is.
* #author GOXR3PLUS[StackOverFlow user] + bachden [StackOverFlow user]
*/
public static final String getBasePathForClass(Class<?> classs) {
// Local variables
File file;
String basePath = "";
boolean failed = false;
// Let's give a first try
try {
file = new File(classs.getProtectionDomain().getCodeSource().getLocation().toURI().getPath());
if (file.isFile() || file.getPath().endsWith(".jar") || file.getPath().endsWith(".zip")) {
basePath = file.getParent();
} else {
basePath = file.getPath();
}
} catch (URISyntaxException ex) {
failed = true;
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (1): ", ex);
}
// The above failed?
if (failed) {
try {
file = new File(classs.getClassLoader().getResource("").toURI().getPath());
basePath = file.getAbsolutePath();
// the below is for testing purposes...
// starts with File.separator?
// String l = local.replaceFirst("[" + File.separator +
// "/\\\\]", "")
} catch (URISyntaxException ex) {
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (2): ", ex);
}
}
// fix to run inside eclipse
if (basePath.endsWith(File.separator + "lib") || basePath.endsWith(File.separator + "bin")
|| basePath.endsWith("bin" + File.separator) || basePath.endsWith("lib" + File.separator)) {
basePath = basePath.substring(0, basePath.length() - 4);
}
// fix to run inside netbeans
if (basePath.endsWith(File.separator + "build" + File.separator + "classes")) {
basePath = basePath.substring(0, basePath.length() - 14);
}
// end fix
if (!basePath.endsWith(File.separator)) {
basePath = basePath + File.separator;
}
return basePath;
}
This code worked for me:
private static String getJarPath() throws IOException, URISyntaxException {
File f = new File(LicensingApp.class.getProtectionDomain().().getLocation().toURI());
String jarPath = f.getCanonicalPath().toString();
String jarDir = jarPath.substring( 0, jarPath.lastIndexOf( File.separator ));
return jarDir;
}
The getProtectionDomain approach might not work sometimes e.g. when you have to find the jar for some of the core java classes (e.g in my case StringBuilder class within IBM JDK), however following works seamlessly:
public static void main(String[] args) {
System.out.println(findSource(MyClass.class));
// OR
System.out.println(findSource(String.class));
}
public static String findSource(Class<?> clazz) {
String resourceToSearch = '/' + clazz.getName().replace(".", "/") + ".class";
java.net.URL location = clazz.getResource(resourceToSearch);
String sourcePath = location.getPath();
// Optional, Remove junk
return sourcePath.replace("file:", "").replace("!" + resourceToSearch, "");
}
I have another way to get the String location of a class.
URL path = Thread.currentThread().getContextClassLoader().getResource("");
Path p = Paths.get(path.toURI());
String location = p.toString();
The output String will have the form of
C:\Users\Administrator\new Workspace\...
The spaces and other characters are handled, and in the form without file:/. So will be easier to use.
The condition is if the directory exists it has to create files in that specific directory without creating a new directory.
The below code only creates a file with the new directory but not for the existing directory . For example the directory name would be like "GETDIRECTION":
String PATH = "/remote/dir/server/";
String fileName = PATH.append(id).concat(getTimeStamp()).append(".txt");
String directoryName = PATH.append(this.getClassName());
File file = new File(String.valueOf(fileName));
File directory = new File(String.valueOf(directoryName));
if (!directory.exists()) {
directory.mkdir();
if (!file.exists() && !checkEnoughDiskSpace()) {
file.getParentFile().mkdir();
file.createNewFile();
}
}
FileWriter fw = new FileWriter(file.getAbsoluteFile());
BufferedWriter bw = new BufferedWriter(fw);
bw.write(value);
bw.close();
Java 8+ version:
Files.createDirectories(Paths.get("/Your/Path/Here"));
The Files.createDirectories() creates a new directory and parent directories that do not exist. This method does not throw an exception if the directory already exists.
This code checks for the existence of the directory first and creates it if not, and creates the file afterwards. Please note that I couldn't verify some of your method calls as I don't have your complete code, so I'm assuming the calls to things like getTimeStamp() and getClassName() will work. You should also do something with the possible IOException that can be thrown when using any of the java.io.* classes - either your function that writes the files should throw this exception (and it be handled elsewhere), or you should do it in the method directly. Also, I assumed that id is of type String - I don't know as your code doesn't explicitly define it. If it is something else like an int, you should probably cast it to a String before using it in the fileName as I have done here.
Also, I replaced your append calls with concat or + as I saw appropriate.
public void writeFile(String value){
String PATH = "/remote/dir/server/";
String directoryName = PATH.concat(this.getClassName());
String fileName = id + getTimeStamp() + ".txt";
File directory = new File(directoryName);
if (! directory.exists()){
directory.mkdir();
// If you require it to make the entire directory path including parents,
// use directory.mkdirs(); here instead.
}
File file = new File(directoryName + "/" + fileName);
try{
FileWriter fw = new FileWriter(file.getAbsoluteFile());
BufferedWriter bw = new BufferedWriter(fw);
bw.write(value);
bw.close();
}
catch (IOException e){
e.printStackTrace();
System.exit(-1);
}
}
You should probably not use bare path names like this if you want to run the code on Microsoft Windows - I'm not sure what it will do with the / in the filenames. For full portability, you should probably use something like File.separator to construct your paths.
Edit: According to a comment by JosefScript below, it's not necessary to test for directory existence. The directory.mkdir() call will return true if it created a directory, and false if it didn't, including the case when the directory already existed.
Trying to make this as short and simple as possible. Creates directory if it doesn't exist, and then returns the desired file:
/** Creates parent directories if necessary. Then returns file */
private static File fileWithDirectoryAssurance(String directory, String filename) {
File dir = new File(directory);
if (!dir.exists()) dir.mkdirs();
return new File(directory + "/" + filename);
}
I would suggest the following for Java8+.
/**
* Creates a File if the file does not exist, or returns a
* reference to the File if it already exists.
*/
public File createOrRetrieve(final String target) throws IOException {
final File answer;
Path path = Paths.get(target);
Path parent = path.getParent();
if(parent != null && Files.notExists(parent)) {
Files.createDirectories(path);
}
if(Files.notExists(path)) {
LOG.info("Target file \"" + target + "\" will be created.");
answer = Files.createFile(path).toFile();
} else {
LOG.info("Target file \"" + target + "\" will be retrieved.");
answer = path.toFile();
}
return answer;
}
Edit: Updated to fix bug as indicated by #Cataclysm and #Marcono1234. Thx guys:)
code:
// Create Directory if not exist then Copy a file.
public static void copyFile_Directory(String origin, String destDir, String destination) throws IOException {
Path FROM = Paths.get(origin);
Path TO = Paths.get(destination);
File directory = new File(String.valueOf(destDir));
if (!directory.exists()) {
directory.mkdir();
}
//overwrite the destination file if it exists, and copy
// the file attributes, including the rwx permissions
CopyOption[] options = new CopyOption[]{
StandardCopyOption.REPLACE_EXISTING,
StandardCopyOption.COPY_ATTRIBUTES
};
Files.copy(FROM, TO, options);
}
Simple Solution using using java.nio.Path
public static Path createFileWithDir(String directory, String filename) {
File dir = new File(directory);
if (!dir.exists()) dir.mkdirs();
return Paths.get(directory + File.separatorChar + filename);
}
If you create a web based application, the better solution is to check the directory exists or not then create the file if not exist. If exists, recreate again.
private File createFile(String path, String fileName) throws IOException {
ClassLoader classLoader = getClass().getClassLoader();
File file = new File(classLoader.getResource(".").getFile() + path + fileName);
// Lets create the directory
try {
file.getParentFile().mkdir();
} catch (Exception err){
System.out.println("ERROR (Directory Create)" + err.getMessage());
}
// Lets create the file if we have credential
try {
file.createNewFile();
} catch (Exception err){
System.out.println("ERROR (File Create)" + err.getMessage());
}
return file;
}
A simple solution using Java 8
public void init(String multipartLocation) throws IOException {
File storageDirectory = new File(multipartLocation);
if (!storageDirectory.exists()) {
if (!storageDirectory.mkdir()) {
throw new IOException("Error creating directory.");
}
}
}
If you're using Java 8 or above, then Files.createDirectories() method works the best.
The following program has the purpose of creating a directory,
folderforallofmyjavafiles.mkdir();
and making a file to go inside that directory,
File myfile = new File("C:\\Users\\username\\Desktop\\folderforallofmyjavafiles\\test.txt");
There are two problems though. One is that it says the directory is being created at the desktop, but when checking for the directory, it is not there. Also, when creating the file, I get the exception
ERROR: java.io.FileNotFoundException: folderforallofmyjavafiles\test.txt (The system cannot find the path specified)
Please help me resolve these issues, here is the full code:
package mypackage;
import java.io.*;
public class Createwriteaddopenread {
public static void main(String[] args) {
File folderforallofmyjavafiles = new File("C:\\Users\\username\\Desktop");
try {
folderforallofmyjavafiles.mkdir(); //Creates a directory (mkdirs makes a directory)
if (folderforallofmyjavafiles.isDirectory() == true) {
System.out.println("Folder created at " + "'" + folderforallofmyjavafiles.getPath() + "'");
}
} catch (Exception e) {
System.out.println("Not working...?");
}
File myfile = new File("C:\\Users\\username\\Desktop\\folderforallofmyjavafiles\\test.txt");
//I even tried this:
//File myfile = new File("folderforallofmyjavafiles/test.txt");
//write your name and age through the file
try {
PrintWriter output = new PrintWriter(myfile); //Going to write to myfile
//This may throw an exception, so I always need a try catch when writing to a file
output.println("myname");
output.println("myage");
output.close();
System.out.println("File created");
} catch (IOException e) {
System.out.printf("ERROR: %s\n", e); //e is the IOException
}
}
}
Thank you so much for helping me out, I really appreciate it.
:)
You're creating the Desktop folder in the C:\Users\username folder. If you check the return value of mkdir, you'd notice it's false because the folder already exists.
How would the system know that you want a folder named folderforallofmyjavafiles unless you tell it so?
So, you didn't create the folder, and then you try to create a file in the (nonexistent) folder, and Java tells you the folder doesn't exist.
Agreed that it's a bit obscure, using a FileNotFoundException, but the text does say "The system cannot find the path specified".
Update
You're probably confused about the variable name, so let me say this. The following are all the same:
File folderforallofmyjavafiles = new File("C:\\Users\\username\\Desktop");
folderforallofmyjavafiles.mkdir();
File x = new File("C:\\Users\\username\\Desktop");
x.mkdir();
File folderToCreate = new File("C:\\Users\\username\\Desktop");
folderToCreate.mkdir();
File gobbledygook = new File("C:\\Users\\username\\Desktop");
gobbledygook.mkdir();
new File("C:\\Users\\username\\Desktop").mkdir();
Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
My code runs inside a JAR file, say foo.jar, and I need to know, in the code, in which folder the running foo.jar is.
So, if foo.jar is in C:\FOO\, I want to get that path no matter what my current working directory is.
return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
Replace "MyClass" with the name of your class.
Obviously, this will do odd things if your class was loaded from a non-file location.
Best solution for me:
String path = Test.class.getProtectionDomain().getCodeSource().getLocation().getPath();
String decodedPath = URLDecoder.decode(path, "UTF-8");
This should solve the problem with spaces and special characters.
To obtain the File for a given Class, there are two steps:
Convert the Class to a URL
Convert the URL to a File
It is important to understand both steps, and not conflate them.
Once you have the File, you can call getParentFile to get the containing folder, if that is what you need.
Step 1: Class to URL
As discussed in other answers, there are two major ways to find a URL relevant to a Class.
URL url = Bar.class.getProtectionDomain().getCodeSource().getLocation();
URL url = Bar.class.getResource(Bar.class.getSimpleName() + ".class");
Both have pros and cons.
The getProtectionDomain approach yields the base location of the class (e.g., the containing JAR file). However, it is possible that the Java runtime's security policy will throw SecurityException when calling getProtectionDomain(), so if your application needs to run in a variety of environments, it is best to test in all of them.
The getResource approach yields the full URL resource path of the class, from which you will need to perform additional string manipulation. It may be a file: path, but it could also be jar:file: or even something nastier like bundleresource://346.fwk2106232034:4/foo/Bar.class when executing within an OSGi framework. Conversely, the getProtectionDomain approach correctly yields a file: URL even from within OSGi.
Note that both getResource("") and getResource(".") failed in my tests, when the class resided within a JAR file; both invocations returned null. So I recommend the #2 invocation shown above instead, as it seems safer.
Step 2: URL to File
Either way, once you have a URL, the next step is convert to a File. This is its own challenge; see Kohsuke Kawaguchi's blog post about it for full details, but in short, you can use new File(url.toURI()) as long as the URL is completely well-formed.
Lastly, I would highly discourage using URLDecoder. Some characters of the URL, : and / in particular, are not valid URL-encoded characters. From the URLDecoder Javadoc:
It is assumed that all characters in the encoded string are one of the following: "a" through "z", "A" through "Z", "0" through "9", and "-", "_", ".", and "*". The character "%" is allowed but is interpreted as the start of a special escaped sequence.
...
There are two possible ways in which this decoder could deal with illegal strings. It could either leave illegal characters alone or it could throw an IllegalArgumentException. Which approach the decoder takes is left to the implementation.
In practice, URLDecoder generally does not throw IllegalArgumentException as threatened above. And if your file path has spaces encoded as %20, this approach may appear to work. However, if your file path has other non-alphameric characters such as + you will have problems with URLDecoder mangling your file path.
Working code
To achieve these steps, you might have methods like the following:
/**
* Gets the base location of the given class.
* <p>
* If the class is directly on the file system (e.g.,
* "/path/to/my/package/MyClass.class") then it will return the base directory
* (e.g., "file:/path/to").
* </p>
* <p>
* If the class is within a JAR file (e.g.,
* "/path/to/my-jar.jar!/my/package/MyClass.class") then it will return the
* path to the JAR (e.g., "file:/path/to/my-jar.jar").
* </p>
*
* #param c The class whose location is desired.
* #see FileUtils#urlToFile(URL) to convert the result to a {#link File}.
*/
public static URL getLocation(final Class<?> c) {
if (c == null) return null; // could not load the class
// try the easy way first
try {
final URL codeSourceLocation =
c.getProtectionDomain().getCodeSource().getLocation();
if (codeSourceLocation != null) return codeSourceLocation;
}
catch (final SecurityException e) {
// NB: Cannot access protection domain.
}
catch (final NullPointerException e) {
// NB: Protection domain or code source is null.
}
// NB: The easy way failed, so we try the hard way. We ask for the class
// itself as a resource, then strip the class's path from the URL string,
// leaving the base path.
// get the class's raw resource path
final URL classResource = c.getResource(c.getSimpleName() + ".class");
if (classResource == null) return null; // cannot find class resource
final String url = classResource.toString();
final String suffix = c.getCanonicalName().replace('.', '/') + ".class";
if (!url.endsWith(suffix)) return null; // weird URL
// strip the class's path from the URL string
final String base = url.substring(0, url.length() - suffix.length());
String path = base;
// remove the "jar:" prefix and "!/" suffix, if present
if (path.startsWith("jar:")) path = path.substring(4, path.length() - 2);
try {
return new URL(path);
}
catch (final MalformedURLException e) {
e.printStackTrace();
return null;
}
}
/**
* Converts the given {#link URL} to its corresponding {#link File}.
* <p>
* This method is similar to calling {#code new File(url.toURI())} except that
* it also handles "jar:file:" URLs, returning the path to the JAR file.
* </p>
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final URL url) {
return url == null ? null : urlToFile(url.toString());
}
/**
* Converts the given URL string to its corresponding {#link File}.
*
* #param url The URL to convert.
* #return A file path suitable for use with e.g. {#link FileInputStream}
* #throws IllegalArgumentException if the URL does not correspond to a file.
*/
public static File urlToFile(final String url) {
String path = url;
if (path.startsWith("jar:")) {
// remove "jar:" prefix and "!/" suffix
final int index = path.indexOf("!/");
path = path.substring(4, index);
}
try {
if (PlatformUtils.isWindows() && path.matches("file:[A-Za-z]:.*")) {
path = "file:/" + path.substring(5);
}
return new File(new URL(path).toURI());
}
catch (final MalformedURLException e) {
// NB: URL is not completely well-formed.
}
catch (final URISyntaxException e) {
// NB: URL is not completely well-formed.
}
if (path.startsWith("file:")) {
// pass through the URL as-is, minus "file:" prefix
path = path.substring(5);
return new File(path);
}
throw new IllegalArgumentException("Invalid URL: " + url);
}
You can find these methods in the SciJava Common library:
org.scijava.util.ClassUtils
org.scijava.util.FileUtils.
You can also use:
CodeSource codeSource = YourMainClass.class.getProtectionDomain().getCodeSource();
File jarFile = new File(codeSource.getLocation().toURI().getPath());
String jarDir = jarFile.getParentFile().getPath();
Use ClassLoader.getResource() to find the URL for your current class.
For example:
package foo;
public class Test
{
public static void main(String[] args)
{
ClassLoader loader = Test.class.getClassLoader();
System.out.println(loader.getResource("foo/Test.class"));
}
}
(This example taken from a similar question.)
To find the directory, you'd then need to take apart the URL manually. See the JarClassLoader tutorial for the format of a jar URL.
I'm surprised to see that none recently proposed to use Path. Here follows a citation: "The Path class includes various methods that can be used to obtain information about the path, access elements of the path, convert the path to other forms, or extract portions of a path"
Thus, a good alternative is to get the Path objest as:
Path path = Paths.get(Test.class.getProtectionDomain().getCodeSource().getLocation().toURI());
The only solution that works for me on Linux, Mac and Windows:
public static String getJarContainingFolder(Class aclass) throws Exception {
CodeSource codeSource = aclass.getProtectionDomain().getCodeSource();
File jarFile;
if (codeSource.getLocation() != null) {
jarFile = new File(codeSource.getLocation().toURI());
}
else {
String path = aclass.getResource(aclass.getSimpleName() + ".class").getPath();
String jarFilePath = path.substring(path.indexOf(":") + 1, path.indexOf("!"));
jarFilePath = URLDecoder.decode(jarFilePath, "UTF-8");
jarFile = new File(jarFilePath);
}
return jarFile.getParentFile().getAbsolutePath();
}
If you are really looking for a simple way to get the folder in which your JAR is located you should use this implementation.
Solutions like this are hard to find and many solutions are no longer supported, many others provide the path of the file instead of the actual directory. This is easier than other solutions you are going to find and works for java version 1.12.
new File(".").getCanonicalPath()
Gathering the Input from other answers this is a simple one too:
String localPath=new File(getClass().getProtectionDomain().getCodeSource().getLocation().toURI()).getParentFile().getPath()+"\\";
Both will return a String with this format:
"C:\Users\User\Desktop\Folder\"
In a simple and concise line.
I had the the same problem and I solved it that way:
File currentJavaJarFile = new File(Main.class.getProtectionDomain().getCodeSource().getLocation().getPath());
String currentJavaJarFilePath = currentJavaJarFile.getAbsolutePath();
String currentRootDirectoryPath = currentJavaJarFilePath.replace(currentJavaJarFile.getName(), "");
I hope I was of help to you.
Here's upgrade to other comments, that seem to me incomplete for the specifics of
using a relative "folder" outside .jar file (in the jar's same
location):
String path =
YourMainClassName.class.getProtectionDomain().
getCodeSource().getLocation().getPath();
path =
URLDecoder.decode(
path,
"UTF-8");
BufferedImage img =
ImageIO.read(
new File((
new File(path).getParentFile().getPath()) +
File.separator +
"folder" +
File.separator +
"yourfile.jpg"));
For getting the path of running jar file I have studied the above solutions and tried all methods which exist some difference each other. If these code are running in Eclipse IDE they all should be able to find the path of the file including the indicated class and open or create an indicated file with the found path.
But it is tricky, when run the runnable jar file directly or through the command line, it will be failed as the path of jar file gotten from the above methods will give an internal path in the jar file, that is it always gives a path as
rsrc:project-name (maybe I should say that it is the package name of the main class file - the indicated class)
I can not convert the rsrc:... path to an external path, that is when run the jar file outside the Eclipse IDE it can not get the path of jar file.
The only possible way for getting the path of running jar file outside Eclipse IDE is
System.getProperty("java.class.path")
this code line may return the living path (including the file name) of the running jar file (note that the return path is not the working directory), as the java document and some people said that it will return the paths of all class files in the same directory, but as my tests if in the same directory include many jar files, it only return the path of running jar (about the multiple paths issue indeed it happened in the Eclipse).
Other answers seem to point to the code source which is Jar file location which is not a directory.
Use
return new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation().toURI().getPath()).getParentFile();
the selected answer above is not working if you run your jar by click on it from Gnome desktop environment (not from any script or terminal).
Instead, I have fond that the following solution is working everywhere:
try {
return URLDecoder.decode(ClassLoader.getSystemClassLoader().getResource(".").getPath(), "UTF-8");
} catch (UnsupportedEncodingException e) {
return "";
}
I had to mess around a lot before I finally found a working (and short) solution.
It is possible that the jarLocation comes with a prefix like file:\ or jar:file\, which can be removed by using String#substring().
URL jarLocationUrl = MyClass.class.getProtectionDomain().getCodeSource().getLocation();
String jarLocation = new File(jarLocationUrl.toString()).getParent();
For the jar file path:
String jarPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getPath();
For getting the directory path of that jar file:
String dirPath = new File(MyClass.class.getProtectionDomain().getCodeSource().getLocation()
.toURI()).getParent();
The results of the two lines above are like this:
/home/user/MyPrograms/myapp/myjar.jar (value of jarPath)
/home/user/MyPrograms/myapp (value of dirPath)
public static String dir() throws URISyntaxException
{
URI path=Main.class.getProtectionDomain().getCodeSource().getLocation().toURI();
String name= Main.class.getPackage().getName()+".jar";
String path2 = path.getRawPath();
path2=path2.substring(1);
if (path2.contains(".jar"))
{
path2=path2.replace(name, "");
}
return path2;}
Works good on Windows
I tried to get the jar running path using
String folder = MyClassName.class.getProtectionDomain().getCodeSource().getLocation().getPath();
c:\app>java -jar application.jar
Running the jar application named "application.jar", on Windows in the folder "c:\app", the value of the String variable "folder" was "\c:\app\application.jar" and I had problems testing for path's correctness
File test = new File(folder);
if(file.isDirectory() && file.canRead()) { //always false }
So I tried to define "test" as:
String fold= new File(folder).getParentFile().getPath()
File test = new File(fold);
to get path in a right format like "c:\app" instead of "\c:\app\application.jar" and I noticed that it work.
The simplest solution is to pass the path as an argument when running the jar.
You can automate this with a shell script (.bat in Windows, .sh anywhere else):
java -jar my-jar.jar .
I used . to pass the current working directory.
UPDATE
You may want to stick the jar file in a sub-directory so users don't accidentally click it. Your code should also check to make sure that the command line arguments have been supplied, and provide a good error message if the arguments are missing.
Actually here is a better version - the old one failed if a folder name had a space in it.
private String getJarFolder() {
// get name and path
String name = getClass().getName().replace('.', '/');
name = getClass().getResource("/" + name + ".class").toString();
// remove junk
name = name.substring(0, name.indexOf(".jar"));
name = name.substring(name.lastIndexOf(':')-1, name.lastIndexOf('/')+1).replace('%', ' ');
// remove escape characters
String s = "";
for (int k=0; k<name.length(); k++) {
s += name.charAt(k);
if (name.charAt(k) == ' ') k += 2;
}
// replace '/' with system separator char
return s.replace('/', File.separatorChar);
}
As for failing with applets, you wouldn't usually have access to local files anyway. I don't know much about JWS but to handle local files might it not be possible to download the app.?
String path = getClass().getResource("").getPath();
The path always refers to the resource within the jar file.
Try this:
String path = new File("").getAbsolutePath();
This code worked for me to identify if the program is being executed inside a JAR file or IDE:
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
If I need to get the Windows full path of JAR file I am using this method:
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
log.error("Error getting JAR path.", e);
return null;
}
}
My complete code working with a Spring Boot application using CommandLineRunner implementation, to ensure that the application always be executed within of a console view (Double clicks by mistake in JAR file name), I am using the next code:
#SpringBootApplication
public class Application implements CommandLineRunner {
public static void main(String[] args) throws IOException {
Console console = System.console();
if (console == null && !GraphicsEnvironment.isHeadless() && isRunningOverJar()) {
Runtime.getRuntime().exec(new String[]{"cmd", "/c", "start", "cmd", "/k",
"java -jar \"" + getPathJar() + "\""});
} else {
SpringApplication.run(Application.class, args);
}
}
#Override
public void run(String... args) {
/*
Additional code here...
*/
}
private static boolean isRunningOverJar() {
try {
String pathJar = Application.class.getResource(Application.class.getSimpleName() + ".class").getFile();
if (pathJar.toLowerCase().contains(".jar")) {
return true;
} else {
return false;
}
} catch (Exception e) {
return false;
}
}
private static String getPathJar() {
try {
final URI jarUriPath =
Application.class.getResource(Application.class.getSimpleName() + ".class").toURI();
String jarStringPath = jarUriPath.toString().replace("jar:", "");
String jarCleanPath = Paths.get(new URI(jarStringPath)).toString();
if (jarCleanPath.toLowerCase().contains(".jar")) {
return jarCleanPath.substring(0, jarCleanPath.lastIndexOf(".jar") + 4);
} else {
return null;
}
} catch (Exception e) {
return null;
}
}
}
Something that is frustrating is that when you are developing in Eclipse MyClass.class.getProtectionDomain().getCodeSource().getLocation() returns the /bin directory which is great, but when you compile it to a jar, the path includes the /myjarname.jar part which gives you illegal file names.
To have the code work both in the ide and once it is compiled to a jar, I use the following piece of code:
URL applicationRootPathURL = getClass().getProtectionDomain().getCodeSource().getLocation();
File applicationRootPath = new File(applicationRootPathURL.getPath());
File myFile;
if(applicationRootPath.isDirectory()){
myFile = new File(applicationRootPath, "filename");
}
else{
myFile = new File(applicationRootPath.getParentFile(), "filename");
}
Not really sure about the others but in my case it didn't work with a "Runnable jar" and i got it working by fixing codes together from phchen2 answer and another from this link :How to get the path of a running JAR file?
The code:
String path=new java.io.File(Server.class.getProtectionDomain()
.getCodeSource()
.getLocation()
.getPath())
.getAbsolutePath();
path=path.substring(0, path.lastIndexOf("."));
path=path+System.getProperty("java.class.path");
Have tried several of the solutions up there but none yielded correct results for the (probably special) case that the runnable jar has been exported with "Packaging external libraries" in Eclipse. For some reason all solutions based on the ProtectionDomain do result in null in that case.
From combining some solutions above I managed to achieve the following working code:
String surroundingJar = null;
// gets the path to the jar file if it exists; or the "bin" directory if calling from Eclipse
String jarDir = new File(ClassLoader.getSystemClassLoader().getResource(".").getPath()).getAbsolutePath();
// gets the "bin" directory if calling from eclipse or the name of the .jar file alone (without its path)
String jarFileFromSys = System.getProperty("java.class.path").split(";")[0];
// If both are equal that means it is running from an IDE like Eclipse
if (jarFileFromSys.equals(jarDir))
{
System.out.println("RUNNING FROM IDE!");
// The path to the jar is the "bin" directory in that case because there is no actual .jar file.
surroundingJar = jarDir;
}
else
{
// Combining the path and the name of the .jar file to achieve the final result
surroundingJar = jarDir + jarFileFromSys.substring(1);
}
System.out.println("JAR File: " + surroundingJar);
The above methods didn't work for me in my Spring environment, since Spring shades the actual classes into a package called BOOT-INF, thus not the actual location of the running file. I found another way to retrieve the running file through the Permissions object which have been granted to the running file:
public static Path getEnclosingDirectory() {
return Paths.get(FileUtils.class.getProtectionDomain().getPermissions()
.elements().nextElement().getName()).getParent();
}
Mention that it is checked only in Windows but i think it works perfect on other Operating Systems [Linux,MacOs,Solaris] :).
I had 2 .jar files in the same directory . I wanted from the one .jar file to start the other .jar file which is in the same directory.
The problem is that when you start it from the cmd the current directory is system32.
Warnings!
The below seems to work pretty well in all the test i have done even
with folder name ;][[;'57f2g34g87-8+9-09!2##!$%^^&() or ()%&$%^##
it works well.
I am using the ProcessBuilder with the below as following:
🍂..
//The class from which i called this was the class `Main`
String path = getBasePathForClass(Main.class);
String applicationPath= new File(path + "application.jar").getAbsolutePath();
System.out.println("Directory Path is : "+applicationPath);
//Your know try catch here
//Mention that sometimes it doesn't work for example with folder `;][[;'57f2g34g87-8+9-09!2##!$%^^&()`
ProcessBuilder builder = new ProcessBuilder("java", "-jar", applicationPath);
builder.redirectErrorStream(true);
Process process = builder.start();
//...code
🍂getBasePathForClass(Class<?> classs):
/**
* Returns the absolute path of the current directory in which the given
* class
* file is.
*
* #param classs
* #return The absolute path of the current directory in which the class
* file is.
* #author GOXR3PLUS[StackOverFlow user] + bachden [StackOverFlow user]
*/
public static final String getBasePathForClass(Class<?> classs) {
// Local variables
File file;
String basePath = "";
boolean failed = false;
// Let's give a first try
try {
file = new File(classs.getProtectionDomain().getCodeSource().getLocation().toURI().getPath());
if (file.isFile() || file.getPath().endsWith(".jar") || file.getPath().endsWith(".zip")) {
basePath = file.getParent();
} else {
basePath = file.getPath();
}
} catch (URISyntaxException ex) {
failed = true;
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (1): ", ex);
}
// The above failed?
if (failed) {
try {
file = new File(classs.getClassLoader().getResource("").toURI().getPath());
basePath = file.getAbsolutePath();
// the below is for testing purposes...
// starts with File.separator?
// String l = local.replaceFirst("[" + File.separator +
// "/\\\\]", "")
} catch (URISyntaxException ex) {
Logger.getLogger(classs.getName()).log(Level.WARNING,
"Cannot firgue out base path for class with way (2): ", ex);
}
}
// fix to run inside eclipse
if (basePath.endsWith(File.separator + "lib") || basePath.endsWith(File.separator + "bin")
|| basePath.endsWith("bin" + File.separator) || basePath.endsWith("lib" + File.separator)) {
basePath = basePath.substring(0, basePath.length() - 4);
}
// fix to run inside netbeans
if (basePath.endsWith(File.separator + "build" + File.separator + "classes")) {
basePath = basePath.substring(0, basePath.length() - 14);
}
// end fix
if (!basePath.endsWith(File.separator)) {
basePath = basePath + File.separator;
}
return basePath;
}
This code worked for me:
private static String getJarPath() throws IOException, URISyntaxException {
File f = new File(LicensingApp.class.getProtectionDomain().().getLocation().toURI());
String jarPath = f.getCanonicalPath().toString();
String jarDir = jarPath.substring( 0, jarPath.lastIndexOf( File.separator ));
return jarDir;
}
The getProtectionDomain approach might not work sometimes e.g. when you have to find the jar for some of the core java classes (e.g in my case StringBuilder class within IBM JDK), however following works seamlessly:
public static void main(String[] args) {
System.out.println(findSource(MyClass.class));
// OR
System.out.println(findSource(String.class));
}
public static String findSource(Class<?> clazz) {
String resourceToSearch = '/' + clazz.getName().replace(".", "/") + ".class";
java.net.URL location = clazz.getResource(resourceToSearch);
String sourcePath = location.getPath();
// Optional, Remove junk
return sourcePath.replace("file:", "").replace("!" + resourceToSearch, "");
}
I have another way to get the String location of a class.
URL path = Thread.currentThread().getContextClassLoader().getResource("");
Path p = Paths.get(path.toURI());
String location = p.toString();
The output String will have the form of
C:\Users\Administrator\new Workspace\...
The spaces and other characters are handled, and in the form without file:/. So will be easier to use.
I wrote a file writing script that lets you write in a file you are looking for in the console, then when you press enter it tries to find the file to see if it exists. My program works, but I don't like that I need the full pathname, every single time. I want a user to just be able to write, say, file_name.txt and the program searches a single directory for it.
Currently, I must use the full pathname every single time. This is not all of my code, but you can see that my file names have a hard coded String pathname. But what if someone else wants to run the program on their own computer? I tried looking for answers to this, but Java is always very difficult for me. If you know a way to make my code generic enough so my Scanner object can take just the file name, that would be so helpful. Thanks, let me know if anything is unclear. I have a Mac, but it should be able to work on any OS.
import java.io.BufferedWriter;
import java.io.File;
import java.io.FileWriter;
import java.io.IOException;
import java.io.PrintWriter;
import java.time.LocalDate;
import java.util.Scanner;
public class FileHandler {
public static boolean fileCheck = true;
public static File logFile;
public static PrintWriter logPrinter;
public static PrintWriter handMadeFile;
public static LocalDate date = LocalDate.now();
public static File fileFromScanner;
public static File directory = new File("/Users/mizu/homework");
public static String fileName;
public static File file;
public static String created = "Log has been created.";
public static String myLogFileName = "/Users/mizu/homework/my_log.txt";
public static String mainFileName = "/Users/mizu/homework/main_file.txt";
public static String fileFromMethod = "/Users/mizu//homework/file_from_method.txt";
public static String fileMessage = "I just wrote my own file contents.";
public static void main(String[] args) {
if (!directory.exists())
{
// create new directory called homework
directory.mkdir();
}
// gets file request from user
System.out.print("Enter file to find: ");
Scanner in = new Scanner(System.in);
String fileName = in.nextLine();
// initialize the main_file
fileFromScanner = new File(mainFileName);
// if main_file exists or not, print message to my_log
if (!fileFromScanner.exists())
{
// create my_log file (logFile), to keep track of events
writeToLog(created);
writeToLog("File path you entered: "
+ fileName + " does not exist.");
System.out.println(fileName + " - does not exist.");
// create file since it doesn't exist
File mainFile = new File(mainFileName);
try {
PrintWriter pwMain = new PrintWriter(new BufferedWriter
(new FileWriter(mainFile)));
writeToLog("Created " + mainFileName);
pwMain.close();
} catch (IOException e) {
// TODO Auto-generated catch block
e.printStackTrace();
}
}
else
{
writeToLog(fileName + " already exists.");
System.out.println(fileName + " - already exists.");
}
// use writeToFile method to write file, create new file name
FileHandler testFile = new FileHandler(fileFromMethod);
testFile.writeToFile(testFile, fileMessage);
} // end Main
All of the other methods are below here, but not shown to keep it short.
As stated in the comments, there are several tools already available to search files in a directory. However, to answer your question, I wrote a simple program that should do what you are looking for:
public static void main(String[] args) {
// Get the absolute path from where your application has initialized
File workingDirectory = new File(System.getProperty("user.dir"));
// Get user input
String query = new Scanner(System.in).next();
// Perform a search in the working directory
List<File> files = search(workingDirectory, query);
// Check if there are no matching files
if (files.isEmpty()) {
System.out.println("No files found in " + workingDirectory.getPath() + " that match '"
+ query + "'");
return;
}
// print all the files that matched the query
for (File file : files) {
System.out.println(file.getAbsolutePath());
}
}
public static List<File> search(File file, String query) {
List<File> fileList = new ArrayList<File>();
// Get all the files in this directory
File[] files = file.listFiles();
if (files != null) {
for (File f : files) {
if (f.isDirectory()) {
// use recursion to search in all directories for the file
fileList.addAll(search(f, query));
} else if (f.getName().toLowerCase().contains(query.toLowerCase())) {
// if the filename matches the query, add it to the list
fileList.add(f);
}
}
}
return fileList;
}
1- You can make users set an environment variable to your path and use the path name in your code.
2- You can check the operating system, and put your files in a well-known folder. (C: for windows, /home for Ubuntu, /WhateverMacFolder for mac and if it is some other os ask user to enter the path.
3- You can create a folder in default path of your program and use it.