I have a project that use command prompt to complie java file,then print the result in console,this is mycode.
public static void main(String[] args) {
String line;
String output = "";
try {
Process p = Runtime.getRuntime().exec("java helloworld");
BufferedReader input = new BufferedReader(new InputStreamReader(p.getInputStream()));
while ((line = input.readLine()) != null) {
output += (line + '\n');
}
input.close();
}
catch (Exception ex) {
ex.printStackTrace();
}
System.out.print(output);
}
But it show nothing,although it work with another command,please help me.
As one of the commenters mentioned this might result in quite complex setups you are running into. It is most likely in your case that an error happens in java and you just do not see the output since error messages are written to the STDERR stream instead of STDOUT.
So there are two options (1) you take the code you already have and also try to read from the process' ErrorStream.
Bufferedreader error = new BufferedReader(new InputStreamReader(p.getErrorStream());
Or if you do not care whether or not the process you were starting was writing to STDERR or to STDOUT you can also use a ProcessBuilder and just set it up to redirect the error stream.
ProcessBuilder pb = new ProcessBuilder("java", "helloworld");
pb.redirectErrorStream(true); // this redirects STDERR to STDOUT
Process p = pb.start();
BufferedReader input = new BufferedReader(new InputStreamReader(p.getInputStream()));
while ((line = input.readLine()) != null) {
output += (line + '\n');
}
input.close();
For the sake of simplicity I omitted all the boilerplate code and exception handling in the above. But I think you will get the idea.
Why are you using the Process builder and executing the same. Why not use JavaCompiler interface. See the documentation it is really well written.
Related
I'm playing a bit around with a small JAVA gui for the command line mode of cloudcompare.
Therefore I'm using a short snippet like these:
var processBuilder = new ProcessBuilder();
try {
var process = processBuilder
.command("open", "-a", "CloudCompare.app", "-n",
"--args", "-NO_TIMESTAMP", "-C_EXPORT_FMT", "LAS",
"-O", "/Users/se/pcl_1.las",
"-O", "/Users/se/pcl_2.las",
"-MERGE_CLOUDS")
.start();
String error, line;
BufferedReader inputStream = new BufferedReader(new InputStreamReader(process.getInputStream()));
while ((line = inputStream.readLine()) != null) {
System.out.println("line = " + line);
}
BufferedReader errorStream = new BufferedReader(new InputStreamReader(process.getErrorStream()));
while ((error = errorStream.readLine()) != null) {
System.out.println("error = " + error);
}
var ret = process.waitFor();
System.out.printf("Program exited with code: %d", ret);
} catch (IOException | InterruptedException e) {
e.printStackTrace();
}
But if I run it on macOS the command line window opens, the process runs normal, but I can't grab any of the informations in it. There is an option to write log files from cloudcompare. That works - the log file shows that all cloud processing steps are done.
Does anybody knows, how to grab the command line output?
As mentioned here, the /usr/bin/open command is not an option to grab the stdinput stream.
I change the command to /Applications/CloudCompare.app/Contents/MacOS/CloudCompare and it works.
The next question is, how to grab the InputStream with a thread. I tried some stack overflow topics, but it doesn't work at the moment, to get the output stream in realtime. It is flushed at the end of the CloudCompare process.
I have command that takes about 4 minutes to complete execution. While executing the command from windows command prompt, it shows timing information and continuous output.
I want to show that output while running the command from my Java code.
Normal execution waits until the command exit and get the output. I want to get the output while running without waiting the command to finish.
Here is my code:
try{
Runtime runtime = Runtime.getRuntime();
Process process = runtime.exec(args);
String line="";
BufferedReader input = new BufferedReader(new InputStreamReader(process.getInputStream()));
while ((line = input.readLine()) != null) {
System.out.println(line);
}
input.close();
BufferedReader errorReader = new BufferedReader(new InputStreamReader(process.getErrorStream()));
errorReader.lines().forEach(System.out::println);
process.waitFor();
System.out.println("---------------------------------------");
}
catch (Exception x){
System.out.println(x.getMessage());
}
Problem with this code is that it wits until the command ends then print all output at once.
The easiest solution is to stop using Runtime.exec, and use the more modern ProcessBuilder class instead. Its inheritIO() method will do exactly what you want:
ProcessBuilder builder = new ProcessBuilder(args);
builder.inheritIO();
Process process = builder.start();
You can’t read all of a process’s standard output or standard error at once. They can appear concurrently, and failing to read either one might or might not cause a process to hang. inheritIO() solves that problem.
For a reason I don't know about, The command I use, which is ffmpeg -i, to produce some resolutions of a video. It writes the output messages to the ErrorStream not OutputStream. When I printed the error stream first, I can see the output.
try{
Runtime runtime = Runtime.getRuntime();
Process process = runtime.exec(args);
BufferedReader errorReader = new BufferedReader(new InputStreamReader(process.getErrorStream()));
BufferedReader lineReader = new BufferedReader(new InputStreamReader(process.getInputStream()));
String line;
BufferedReader err = new BufferedReader(new InputStreamReader(process.getErrorStream()));
while ((line = err.readLine()) != null) {
System.out.println(line);
}
err.close();
BufferedReader input = new BufferedReader(new InputStreamReader(process.getInputStream()));
while ((line = input.readLine()) != null) {
System.out.println(line);
}
input.close();
process.waitFor();
System.out.println("---------------------------------------");
}
catch (Exception x){
System.out.println(x.getMessage());
}
I'm trying to capture output of an external program using java but I can't.
I have the code to show it, but not to put it into a variable.
I will use, for example, sqlplus to execute my oracle code "into exec.sql"
system/orcl#orcl : user/password/DB name
public static String test_script () {
String RESULT="";
String fileName = "#src\\exec.sql";
String sqlPath = ".";
String arg1="system/orcl#orcl";
String sqlCmd = "sqlplus";
String arg2 = fileName;
try {
String line;
ProcessBuilder pb = new ProcessBuilder(sqlCmd, arg1, arg2);
Map<String, String> env = pb.environment();
env.put("VAR1", arg1);
env.put("VAR2", arg2);
pb.directory(new File(sqlPath));
pb.redirectErrorStream(true);
Process p = pb.start();
BufferedReader bri = new BufferedReader
(new InputStreamReader(p.getInputStream()));
while ((line = bri.readLine()) != null) {
RESULT+=line;
}
System.out.println("Done.");
}
catch (Exception err) {
err.printStackTrace();
}
return RESULT;
}
Because the Process will execute in a new thread it's likely that there is no output or incomplete output available when you come to your while loop.
Process p = pb.start();
// process runs in another thread parallel to this one
BufferedReader bri = new BufferedReader(new InputStreamReader(p.getInputStream()));
// bri may be empty or incomplete.
while ((line = bri.readLine()) != null) {
RESULT+=line;
}
So you need to wait for the process to complete before attempting to interact with it's output. Try using the Process.waitFor() method to pause the current thread until your process has had an opportunity to complete.
Process p = pb.start();
p.waitFor(); // wait for process to finish then continue.
BufferedReader bri = new BufferedReader(new InputStreamReader(p.getInputStream()));
while ((line = bri.readLine()) != null) {
RESULT+=line;
}
This is only a simple approach you could also process the output of the process while it runs in parallel but then you would need to monitor the status of the process i.e. is it still running or has it completed, and the availability of output.
Use Apache Commons Exec, it will make your life much easier. Check the tutorials for information about basic usage. To read the command line output after obtaining an executor object (probably DefaultExecutor), create an OutputStream to whatever stream you wish (i.e a FileOutputStream instance may be, or System.out), and:
executor.setStreamHandler(new PumpStreamHandler(yourOutputStream));
Process process = Runtime.getRuntime().exec("tasklist");
BufferedReader reader =
new BufferedReader(new InputStreamReader(process.getInputStream()));
process.waitFor();
There are many reasons that waitFor() doesn't return.
But it usually boils down to the fact that the executed command doesn't quit.
This, again, can have many reasons.
One common reason is that the process produces some output and you don't read from the appropriate streams. This means that the process is blocked as soon as the buffer is full and waits for your process to continue reading. Your process in turn waits for the other process to finish (which it won't because it waits for your process, ...). This is a classical deadlock situation.
You need to continually read from the processes input stream to ensure that it doesn't block.
There's a nice article that explains all the pitfalls of Runtime.exec() and shows ways around them called "When Runtime.exec() won't" (yes, the article is from 2000, but the content still applies!)
It appears you are not reading the output before waiting for it to finish. This is fine only if the output doesn't fill the buffer. If it does, it will wait until you read the output, catch-22.
Perhaps you have some errors which you are not reading. This would case the application to stop and waitFor to wait forever. A simple way around this is to re-direct the errors to the regular output.
ProcessBuilder pb = new ProcessBuilder("tasklist");
pb.redirectErrorStream(true);
Process process = pb.start();
BufferedReader reader = new BufferedReader(new InputStreamReader(process.getInputStream()));
String line;
while ((line = reader.readLine()) != null)
System.out.println("tasklist: " + line);
process.waitFor();
Also from Java doc:
java.lang
Class Process
Because some native platforms only provide limited buffer size for standard input and
output streams, failure to promptly write the input stream or read the output stream of
the subprocess may cause the subprocess to block, and even deadlock.
Fail to clear the buffer of input stream (which pipes to the output stream of subprocess)
from Process may lead to a subprocess blocking.
Try this:
Process process = Runtime.getRuntime().exec("tasklist");
BufferedReader reader =
new BufferedReader(new InputStreamReader(process.getInputStream()));
while ((reader.readLine()) != null) {}
process.waitFor();
I would like to add something to the previous answers but since I don't have the rep to comment, I will just add an answer. This is directed towards android users which are programming in Java.
Per the post from RollingBoy, this code almost worked for me:
Process process = Runtime.getRuntime().exec("tasklist");
BufferedReader reader =
new BufferedReader(new InputStreamReader(process.getInputStream()));
while ((reader.readLine()) != null) {}
process.waitFor();
In my case, the waitFor() was not releasing because I was executing a statement with no return ("ip adddr flush eth0"). An easy way to fix this is to simply ensure you always return something in your statement. For me, that meant executing the following: "ip adddr flush eth0 && echo done". You can read the buffer all day, but if there is nothing ever returned, your thread will never release its wait.
Hope that helps someone!
There are several possibilities:
You haven't consumed all the output on the process's stdout.
You haven't consumed all the output on the process's stderr.
The process is waiting for input from you and you haven't provided it, or you haven't closed the process's stdin.
The process is spinning in a hard loop.
As others have mentioned you have to consume stderr and stdout.
Compared to the other answers, since Java 1.7 it is even more easy. You do not have to create threads yourself anymore to read stderr and stdout.
Just use the ProcessBuilder and use the methods redirectOutput in combination with either redirectError or redirectErrorStream.
String directory = "/working/dir";
File out = new File(...); // File to write stdout to
File err = new File(...); // File to write stderr to
ProcessBuilder builder = new ProcessBuilder();
builder.directory(new File(directory));
builder.command(command);
builder.redirectOutput(out); // Redirect stdout to file
if(out == err) {
builder.redirectErrorStream(true); // Combine stderr into stdout
} else {
builder.redirectError(err); // Redirect stderr to file
}
Process process = builder.start();
For the same reason you can also use inheritIO() to map Java console with external app console like:
ProcessBuilder pb = new ProcessBuilder(appPath, arguments);
pb.directory(new File(appFile.getParent()));
pb.inheritIO();
Process process = pb.start();
int success = process.waitFor();
You should try consume output and error in the same while
private void runCMD(String CMD) throws IOException, InterruptedException {
System.out.println("Standard output: " + CMD);
Process process = Runtime.getRuntime().exec(CMD);
// Get input streams
BufferedReader stdInput = new BufferedReader(new InputStreamReader(process.getInputStream()));
BufferedReader stdError = new BufferedReader(new InputStreamReader(process.getErrorStream()));
String line = "";
String newLineCharacter = System.getProperty("line.separator");
boolean isOutReady = false;
boolean isErrorReady = false;
boolean isProcessAlive = false;
boolean isErrorOut = true;
boolean isErrorError = true;
System.out.println("Read command ");
while (process.isAlive()) {
//Read the stdOut
do {
isOutReady = stdInput.ready();
//System.out.println("OUT READY " + isOutReady);
isErrorOut = true;
isErrorError = true;
if (isOutReady) {
line = stdInput.readLine();
isErrorOut = false;
System.out.println("=====================================================================================" + line + newLineCharacter);
}
isErrorReady = stdError.ready();
//System.out.println("ERROR READY " + isErrorReady);
if (isErrorReady) {
line = stdError.readLine();
isErrorError = false;
System.out.println("ERROR::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::" + line + newLineCharacter);
}
isProcessAlive = process.isAlive();
//System.out.println("Process Alive " + isProcessAlive);
if (!isProcessAlive) {
System.out.println(":::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Process DIE " + line + newLineCharacter);
line = null;
isErrorError = false;
process.waitFor(1000, TimeUnit.MILLISECONDS);
}
} while (line != null);
//Nothing else to read, lets pause for a bit before trying again
System.out.println("PROCESS WAIT FOR");
process.waitFor(100, TimeUnit.MILLISECONDS);
}
System.out.println("Command finished");
}
I think I observed a similar problem: some processes started, seemed to run successfully but never completed. The function waitFor() was waiting forever except if I killed the process in Task Manager.
However, everything worked well in cases the length of the command line was 127 characters or shorter. If long file names are inevitable you may want to use environmental variables, which may allow you keeping the command line string short. You can generate a batch file (using FileWriter) in which you set your environmental variables before calling the program you actually want to run.
The content of such a batch could look like:
set INPUTFILE="C:\Directory 0\Subdirectory 1\AnyFileName"
set OUTPUTFILE="C:\Directory 2\Subdirectory 3\AnotherFileName"
set MYPROG="C:\Directory 4\Subdirectory 5\ExecutableFileName.exe"
%MYPROG% %INPUTFILE% %OUTPUTFILE%
Last step is running this batch file using Runtime.
Here is a method that works for me.
NOTE: There is some code within this method that may not apply to you, so try and ignore it. For example "logStandardOut(...), git-bash, etc".
private String exeShellCommand(String doCommand, String inDir, boolean ignoreErrors) {
logStandardOut("> %s", doCommand);
ProcessBuilder builder = new ProcessBuilder();
StringBuilder stdOut = new StringBuilder();
StringBuilder stdErr = new StringBuilder();
boolean isWindows = System.getProperty("os.name").toLowerCase().startsWith("windows");
if (isWindows) {
String gitBashPathForWindows = "C:\\Program Files\\Git\\bin\\bash";
builder.command(gitBashPathForWindows, "-c", doCommand);
} else {
builder.command("bash", "-c", doCommand);
}
//Do we need to change dirs?
if (inDir != null) {
builder.directory(new File(inDir));
}
//Execute it
Process process = null;
BufferedReader brStdOut;
BufferedReader brStdErr;
try {
//Start the command line process
process = builder.start();
//This hangs on a large file
// https://stackoverflow.com/questions/5483830/process-waitfor-never-returns
//exitCode = process.waitFor();
//This will have both StdIn and StdErr
brStdOut = new BufferedReader(new InputStreamReader(process.getInputStream()));
brStdErr = new BufferedReader(new InputStreamReader(process.getErrorStream()));
//Get the process output
String line = null;
String newLineCharacter = System.getProperty("line.separator");
while (process.isAlive()) {
//Read the stdOut
while ((line = brStdOut.readLine()) != null) {
stdOut.append(line + newLineCharacter);
}
//Read the stdErr
while ((line = brStdErr.readLine()) != null) {
stdErr.append(line + newLineCharacter);
}
//Nothing else to read, lets pause for a bit before trying again
process.waitFor(100, TimeUnit.MILLISECONDS);
}
//Read anything left, after the process exited
while ((line = brStdOut.readLine()) != null) {
stdOut.append(line + newLineCharacter);
}
//Read anything left, after the process exited
while ((line = brStdErr.readLine()) != null) {
stdErr.append(line + newLineCharacter);
}
//cleanup
if (brStdOut != null) {
brStdOut.close();
}
if (brStdErr != null) {
brStdOut.close();
}
//Log non-zero exit values
if (!ignoreErrors && process.exitValue() != 0) {
String exMsg = String.format("%s%nprocess.exitValue=%s", stdErr, process.exitValue());
throw new ExecuteCommandException(exMsg);
}
} catch (ExecuteCommandException e) {
throw e;
} catch (Exception e) {
throw new ExecuteCommandException(stdErr.toString(), e);
} finally {
//Log the results
logStandardOut(stdOut.toString());
logStandardError(stdErr.toString());
}
return stdOut.toString();
}
Asynchronous reading of stream combined with avoiding Wait with a timeout will solve the problem.
You can find a page explaining this here http://simplebasics.net/.net/process-waitforexit-with-a-timeout-will-not-be-able-to-collect-the-output-message/
public static void main(String[] args) throws PyException, IOException, InterruptedException
these should be the exceptions thrown
I want to run a C/C++ program's exe file using java.......and handle its input and output......
my code is
import java.io.*;
class run2 {
public static void main(String[] args) throws java.io.IOException {
String[] command = new String[3];
command[0] = "cmd";
command[1] = "/C";
// command[2] = "java Run1";
command[2] = "start C:\\WE.EXE";
Process p = Runtime.getRuntime().exec(command);
String i = "20";
BufferedReader stdInput = new BufferedReader(new InputStreamReader(
p.getInputStream()));
BufferedWriter st = new BufferedWriter(new OutputStreamWriter(
p.getOutputStream()));
String s = null;
System.out.println("Here is the standard output of the command:\n");
s = stdInput.readLine();
System.out.println(s);
st.write(i);
st.newLine();
st.flush();
while ((s = stdInput.readLine()) != null) {
System.out.println("Stdout: " + s);
}
try {
System.out.println("Exit status = " + p.waitFor());
}
catch (InterruptedException e) {
}
stdInput.close();
}
}
i am getting an error which says pipes is closed
do help me out.....
Well, first of all, if there isn't a WE.EXE in C:/, that could be an issue. If no process is ever launched, of course you can't do anything with its input/output pipes.
However, presuming you have a WE.EXE, your error is probably at:
st.flush();
Your application is opening up WE.EXE in command prompt, or cmd.exe, who will take care of both standard input and standard output. Your call stdInput.readLine(); will wait until WE.EXE, and therefore cmd.exe, terminates, at which point the output stream will be closed (and you obviously can't write onto a closed pipe).
So if you want to handle input and output yourself, you should launch WE.exe directly, like:
Process p = Runtime.getRuntime().exec("C://WE.EXE");
Additionally, you may consider using ProcessBuilder instead of Runtime.exec.
Small detail, but consider using Java's naming conventions--for example, your class name would be Run2 (or something more descriptive) instead of run2.
You are trying to read from a stream (stdInput) that does not exist yet.
It won't exist until the WE.EXE program writes something to it.
Just wait until you send the commands to the program.
In other words, take out the first input line, and it will work fine.
//s = stdInput.readLine();
System.out.println(s);
st.write(i);
st.newLine();
st.flush();
while ((s = stdInput.readLine()) != null)
{ System.out.println("Stdout: " + s); }