I am running Eclipse Luna (4.4.1) under Ubuntu 14.10 (Utopic Unicorn) and have a project that uses annotation processing to validate certain forms in the code and generate utility code. In eclipse the code is not being generated.
First, the processors work perfectly with javac. Second the processors DO run in Eclipse. If I alter them to throw exceptions Eclipse reports that. Also if I provide the processors with malformed code (such as a getter/setter pair with different types) it reports the error properly (red squiggles, proper error message, whole nine yards).
No code appears in .apt_generated nor are class files generated.
I've tried disabling them and re-enabling them, starting a new project, tried it on a fresh install of Eclipse, changing the project version from 1.7 to 1.8 and back again, tried batch mode and not batch mode, changing the .apt_generated directory, double checked the permissions on .apt_generated, probably a few other things that I can't recall.
At this point I'm just running javac separately and thinking about making this our first Apache Ant or Maven project if that would help but I'd rather not quite at this juncture.
Anyone have any luck with code generation within Eclipse? Anything else to do or check?
Verify your project is set to actually use APT, as shown in https://www.eclipse.org/jdt/apt/introToAPT.php. Be aware those are project settings, not workspace preferences.
Make sure your potentially generated code is not deleted by some other part of your workflow. E.g. a second processor cleaning the directory that a first processor generated into.
Check that you are using a JDT and not a JRE both for running Eclipse as well as building your project.
Verify that org.eclipse.jdt.apt.core is part of your Eclipse installation, as that is the actual annotation processor integration for the JDT.
Verify your processor has a correctly filled file META-INF/services/javax.annotation.processing.Processor, pointing to the right class implementing the processor. Eclipse may ignore it otherwise.
That being said, I have used different annotation processors (like butterknife for Android) in Eclipse over the years and didn't run into such problems.
I had a similar problem with the AutoValue annotations not being processed with Eclipse 2019-3 with OpenJDK 11 as target runtime. In the Eclipse "Error Log" panel I saw this error:
java.lang.Exception: java.lang.UnsupportedClassVersionError:
javax/lang/model/element/ModuleElement has been compiled by a more recent version of the Java Runtime (class file version 53.0), this version of the Java Runtime only recognizes class file versions up to 52.0
Eclipse was running on an old Java 8 installation as indicated by Help -> About Eclipse IDE -> Installation Details -> Configuration. In my case, Eclipse found the JRE to run on on the PATH environment variable, see here. I forced Eclipse to use the OpenJDK 11 installation by adding the -vm argument to the Eclipse.ini:
-vm
"C:\path\to\OpenJDK\bin\server\jvm.dll"
Related
I'm going through this difficulty, I'm new to using this technology. Before formatting the machine, this project was running perfectly, I backed up everything and formatted. Now that I try to import the project into the software I come across some errors.
I performed the import through Maven->existing maven projects, the build runs, but returns the following errors:
Error in pom.xml file.
Some maven dependencies are missing.
Build path specifies JavaSE-11 execution environment. There are no
JREs installed in the workspace that are strictly compatible with
this environment.
The compiler compliance specified is 11 but a JRE 17 is used.
Please,look at the prints:
Since then I have been trying to resolve these issues, I have checked the versions of java, jre, jdk and the like. I managed to partially solve the jre problem but after some time I had conflicts again, but involving maven dependencies I didn't get any success.
Honestly I don't understand the reason for the errors, I kept the same computer settings before formatting, that is, I installed the versions that were before.
I would suggest to look into the preferences for the installed JDKs/JREs for your workspace. You can find those settings via Preferences -> Java -> Installed JREs. There you can see which JREs are configured to be used by the IDE for your projects (in general).
Then, please also take a look at the Execution Environment category below that preference node. There you can define which JRE should be used for which execution environment. Your project seem to require a JavaSE-11 environment. When you select that environment from the list, you will see which installed JRE the IDE will use to fulfill that JavaSE-11 requirement of the project.
I would also run a Maven -> Update Project---, since the dependences that are marked in the pom.xml file seem to be just fine, so probably a broken download of those dependencies, but also hard to say without the exact errors being mentioned.
I created a custom process listener for my jbpm and deployed the jar in artifact and built and deployed in project setting and gave deployment.xml resolver type as reflection and package name . classname in identifier
i'm stuck with this error when i try to build and deploy the jar in the project please help me guys.
The error i'm facing
classes with v59 are emitted by javac v15 (or javac v16 and up, if using the --release 15 switch). A java that complains about class files being higher than v52 is java v8.
In other words, you've compiled code to class files targeted at java 15, and are trying to run these on a java 8, and obviously that square peg does not fit into that round hole.
You have 3 available solutions:
Upgrade the java to java15 or up. That'd be the java running in that cloud / workbench thing.
Downgrade the java you're compiling with back down to jdk8. If the class file was e.g. produced on your workmachine, either learn how you configure which java is the default target, or if using an IDE edit the project settings, or if you can't figure any of this out, just uninstall it all and ensure only a java8 is installed. Not recommended.
Configure the build script (and, depending on how you've set things up, your IDE configuration) that you want to target java8. If you're using javac on the command line, this boils down to adding a --release 8 option when compiling. Find the equivalent of that for maven, gradle, eclipse, intellij - whatever you are using.
Any one of these options will fix your problem. The list is exhaustive.
I had the same issue. I was creating the docker image with java 11 version and trying to deploy it with java 11 on Kubernetes using kubectl commands.
How I fixed it: I need to create the docker image again with java 8 version afterthat I moved this image to docker hub and deploy it on Kubernetes.
I have Eclipse for Java installed on my 64-bit Windows 10. And since than, I was able to do Java development without any configuration.
Previously, the automatically build is selected by default. But when I manually delete the .class files, and want to build again, nothing happens.
When I try to run the program, it was not surprised that the error message says that it cannot find the class files.
Notice that, from the beginning, I didn't configure JDK in Eclipse, and it worked.
I found some source on stack overflow that says, Eclipse has its built-in compiler such that it does not need the javac in JDK.
Can I develop Java programs if I have only JRE installed?
But why after I deleted the .class files, the built-in compiler does not work ?
Regarding the JDK: if you are using Eclipse, then you don't need JDK because eclipse has it's own compiler. However for some plugins like Maven to work JDK will be required.
Regarding building the project: Have you tried cleaning and rebuilding the project?
Clean command is available under Project tab.
I'm trying to get started with Eclipse/Java/Scala on a MacBook. The installed JDK was 1.5. The SDT plugin for Scala requires 1.6 which was included in an OS update, but I also manually installed a package from Apple to update 1.6.
The problem is that I cannot run anything from Eclipse. I always get the following error:
An internal error occurred during: "Launching TestFooBasicTest".
Could not initialize class com.ibm.icu.impl.JavaTimeZone
I also tried to use the old 1.5 version, but to no avail.
What is going wrong here?
I had the same problem trying to run a scala program with Ubuntu 10.4 and stock eclipse (Galileo 3.5.2) and java (java-6-openJdk ) - and the scala pluging downloaded from scala site, of course. I fixed it by manually changing /usr/lib/eclipse/plugins/com.ibm.icu_4.0.1.v20100125.jar as suggested in this thread (btw I discovered that Emacs can change a jar file in place: nice):
http://www.eclipse.org/forums/index.php?t=msg&goto=488654
It's caused by ubuntu openjdk package with broken symbol links for TimeZone configuration. The best solution from forum thread is,
Reinstalling tzdata-java was the fix for me:
sudo apt-get --reinstall install tzdata-java
The problem is:
An internal error occurred during: "Launching TestFooBasicTest". Could not initialize class com.ibm.icu.impl.JavaTimeZone
A quick google search reveals that this class belongs to the IBM Globalization package ICU. http://www-01.ibm.com/software/globalization/icu/index.jsp
A guess would be that this is a package used internally by Scala that you have not installed properly, causing Scala startup to fail.
Make sure that you set java 1.6 in the run configuration (Run/Run configurations).
Did you upgrade to Snow Leopard? Are you using the Eclipse SWT/Carbon or the Eclipse SWT/Cocoa? I was seeing some strangeness with Eclipse after I upgraded to SL. Switching to the Eclipse SWT/Cocoa from Eclipse SWT/Carbon helped. Also restoring my 1.5 VM, which the SL install removes in a sneaky way(by deleting and leaving the symbolic link pointing to 1.6), helped me fix several issues with Java code that had natives(i.e. usb-serial port code).
Check what are the JVMs that Eclipse is aware of and where they are located (Preferences -> Java -> Installed JRE), and also check the run/debug configuration of your programs. By default, Eclipse knows about the JRE that was used to launch itself, and other JREs that you add manually. However, if you upgrade some components and the JREs changed, Eclipse can get "confused" about them.
I had this same issue with Eclipse on Windows. I tried a number of different things including a new hello world program in a new workspace. I finally got this to work by pointing Eclipse to a different JRE to execute with. I know that Apple provides the JRE for Mac, but it does seem like this issue is related to Eclipse having trouble with the JRE used to run Eclipse itself. See here for configuring which VM Eclipse executes with.
This question already has answers here:
How to fix java.lang.UnsupportedClassVersionError: Unsupported major.minor version
(51 answers)
Closed 6 years ago.
I am not a Java programmer really, so I am posting this question. The exception is being thrown java.lang.UnsupportedClassVersionError in my main class in an eclipse project. If I comment out the imports that this class has, it compiles and runs fine. If I put the imports back in, it does not work. Does this mean that the libraries I am importing were compiled with a newer or older version of java than I have? when i do java -version on the system i get 1.5_07
I could've sworn this was actually working last week, but maybe some setting in eclipse got tweaked? Is the Java Build Path in eclipse what I need to look for to check the JRE and compiler versions?
In Eclipse, the compiler version is set independent of the JRE version. That means you can set the compiler to Java version 1.6 and use the JRE 1.5. In this case, you compiled classes cannot be run.
You can check the preferences in Window / Preferences / Java / Compiler for the default compiler compliance level, or the properties of your project for a project specific compiler compliance level. Compare that level with the JRE used in your project (Project / Properties / Java Build Path -> Libraries / JRE System Library) and in your program's launch configuration (via the Run / Run Configurations... menu).
UnsupportedClassVersionError means that the Java runtime environment you are using doesn't recognise the version of a class file that you are trying to execute. The most common cause for this error is trying to use a class file compiled for a newer Java version on an older Java version - for example, you are trying to use a class compiled for Java 6 on a Java 5 runtime environment.
As Eugene explained, Eclipse has its own built-in compiler, it does not use the compiler from the JDK - so that's how you can end up with Java 6 class files even if you're running on Java 5.
Christian explains how to set the Java class file version in Eclipse.
Eclipse is not using JDK compiler, but has its own compiler which can produce bytecode for any JRE. You need to make sure that compiler settings in your project are set to the same or lower version as the JRE you have registered in Eclipse. See Window / Preferences / Java / Installed JREs and also check what JRE is used in your launch configuration (see Run menu for that).
If your imported classes come from an external library (i.e., not compiled from sources within your project), then you should validate that the JRE used for your project is new enough for this library.
If you are using Maven with Eclipse, you can use the Maven plugin to update the project and then do a Maven "clean" . This resolved a goofy and unexpected show of this error in my case.
I know this is an OLD thread now but I had a recent adventure with this type of error.
When trying to compile my project within Eclipse using an Ant build file.
Eclipse Kepler (Java 1.7)
Ant 1.7
Project = Java 1.5
All internal paths and compiler settings were amended to look at Java 1.5 and the project built fine in Eclipse.
When trying to compile using Ant I got the java.lang.UnsupportedClassVersionError in eclipse and began looking around - including on here and finding this page.
My resolution was this :
Windows > Preferences > Ant > Runtime > Global Entries
Global Entries was pointing at the Java 1.7 tools.jar
I added a new External Jar (on the right menu) and pointed it at the Java 1.5 tools.jar
I removed the original entry (for 1.7 tools.jar) and my ant builds started working.