I'm using GridLayout and all my panels have the same size, how can I change their size?
I tried all functions getPreferred/Minimum/MaximumSize which makes that, and nothing.
I still want to stay with GridLayout
Any suggestions?
By its very nature, all components held by a GridLayout will have the same size. If you want them to be different sizes,
You can use a different layout, such as a GridBagLayout or MigLayout or
Use the GridLayout to hold same-sized JPanels that act as containers for other components. The inner components of course can be different sizes. For example: a chess board that holds its chess cells in a GridLayout, but that allows each cell to hold a chess piece that has varying sizes.
If this doesn't answer your question, then please clarify your question.
So I managed to split all the part above to my first JPanel which located to NORTH.
Then, the JPanel with the button I did the same to be located SOUTH.
So the scrolled JLabel in now located in the CENTER which allows him to be flexible.
JPanel mainPanel1 = new JPanel(new GridLayout(6,1));
mainPanel1.add(titleLabel);
mainPanel1.add(participantPanel);
mainPanel1.add(swimPanel);
mainPanel1.add(ridePanel);
mainPanel1.add(runPanel);
mainPanel1.add(categoriesPanel);
JPanel mainPanel2 = new JPanel(new GridLayout(1,1));
mainPanel2.add(listPanel);
JPanel mainPanel3 = new JPanel(new GridLayout(1,1));
mainPanel3.add(buttonsPanel);
this.getContentPane().add(mainPanel1, BorderLayout.NORTH);
this.getContentPane().add(mainPanel2, BorderLayout.CENTER);
this.getContentPane().add(mainPanel3, BorderLayout.SOUTH);
Related
I'm trying to create a simple login screen consisting of different panels. I want help in resizing panels. The Panel I want resized is coloured in Green. I want to make it a bit smaller. The Panel in Green is the North Panel and is set to Border Layout. I want to make the green panel smaller since i feel its too big
I tried northPanel.setSize(150,150); but I got no result
This is my code:
JLabel lblWelcome = new JLabel("Welcome To The Login Screen", SwingConstants.CENTER);
JPanel northPanel = new JPanel(new BorderLayout());
northPanel.setBackground(Color.green);
northPanel.add(lblWelcome, BorderLayout.CENTER);
You are using a BorderLayout which has five positions to put components in the layout. The five positions are PAGE_START, PAGE_END, LINE_START, LINE_END, and CENTER. Here is a diagram of these positions:
For this layout, you want to put the component that should take the remaining space of the frame in the CENTER position. For this reason, the northPanel is probably better suited in the PAGE_START position while the JPanel that houses the login labels and submit button should be in the CENTER position. Using this positioning will allow you to resize the northPanel and allow the panel housing the login labels and submit button to take up the remaining frame space.
I want to make the green panel smaller
Looks to me like the two panels are the same size which tells me you are using a GridLayout for your frame.
Don't use a GridLayout, instead keep the default BorderLayout of the frame.
Then your code would be something like:
JLabel lblWelcome = new JLabel("Welcome To The Login Screen", SwingConstants.CENTER);
JPanel northPanel = new JPanel(new BorderLayout());
northPanel.setBackground(Color.green);
northPanel.add(lblWelcome, BorderLayout.CENTER);
frame.add(northPanel, BorderLayout.PAGE_START);
frame.add(centerPanel, BorderLayout.CENTER);
Now the green panel will only be as big as the JLabel. If you want the panel to be bigger, then add an EmptyBorder to the northPanel. Read the section from the Swing tutorial on How to Use Borders for more information.
I'm using a JFrame with the size of 800x600.
what i'm trying to do is make this:
the black Panel has 2 other panels inside of him with the size of 300x300 each.
the result is that the black panel is to the left (as suposed) and the red panel in in the centre with a gap on top between the frame and the panel. also, if i remove the black panel the right panel is filling the whole frame...
this is the code:
//create the left part of the screen
JPanel leftPanels = new JPanel();
leftPanels.setLayout(new GridLayout(2,1));
leftPanels.setSize(new Dimension(300,600));
// just to illustrate the 2 panels inside of the black panel.
//leftPanels.add(new JPanel());
//leftPanels.add(new JPanel());
//create the right part
JPanel rightPanel = new JPanel();
rightPanel.setSize(new Dimension(500,600));
rightPanel.setBackground(Color.red);
this.add(leftPanels);
this.add(rightPanel);
this.validate();
this.repaint();
is there an easy way to fix this?
I also tried a Gridlayout on the JFrame but that gives me 2 panels of 400X600 each
First, use FlowLayout like this
setLayout(new FlowLayout(FlowLayout.LEFT));
Secondly, kindly use setPreferedSize rather than setSize for the JPanels
leftPanels.setPreferredSize(new Dimension(300,600));
I don't know what is cashRegister, but it looks like you are not adding the rightPanel to JFrame so make sure you add it.
Try to set the layout of the frame to null. Then use setBounds to position the panel.
If you are trying to set the panel relatively one from another set the frame layout to null
this.getContentPane().setLayout(null);
Then you will be able to place them absolutely.
For more info : Doing Without a Layout Manager (Absolute Positioning)
I am trying to create a toolbar that will go at the top of all the pages in my java swing application.
I am creating a JPanel with a series of individual JPanels (containers) inside it. Each JPanel (container) has a north and south component or just a north component, set up using a GridLayout.
My problem is, I want a small gap between the north and south component, but I can't see how to do it and have not been able to find any help on the internet.
Below is a working example for the code for one of the containers:
public static void CustomersGui(){
final JFrame frame = new JFrame("Nested Layout Example");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
JPanel container1 = new JPanel();
container1.setLayout(new GridLayout(2,1));
JButton buttonDiary = new JButton("Diary");
buttonDiary.setPreferredSize(new Dimension(140, 25));
JButton buttonCars = new JButton("Cars");
buttonCars.setPreferredSize(new Dimension(140, 25));
container1.add(buttonDiary, BorderLayout.NORTH);
container1.add(buttonCars, BorderLayout.SOUTH);
frame.setContentPane(container1);
frame.pack();
frame.setVisible(true);
}
I am trying to create a toolbar that will go at the top of all the pages in my java swing application.
Why don't just use JToolBar? See How to use Tool Bars
I am creating a JPanel with a series of individual JPanels (containers) inside it. Each JPanel (container) has a north and south
component or just a north component, set up using a GridBagLayout.
Based on your code none of these statements is true: you are adding buttons (not panels) and you are using GridLayout not GridBagLayout:
JPanel container1 = new JPanel();
container1.setLayout(new GridLayout(2,1)); // GridLayout
JButton buttonDiary = new JButton("Diary"); // button here
buttonDiary.setPreferredSize(new Dimension(140, 25));
JButton buttonCars = new JButton("Cars"); // another button here
Besides you are using BorderLayout constraints that will be totally ignored by either GridLayout or GridBagLayout:
container1.add(buttonDiary, BorderLayout.NORTH);
container1.add(buttonCars, BorderLayout.SOUTH);
You should have a look to the whole Laying Out Components Within a Container lesson to learn about layout managers and how do all of them work.
In addition
As wisely pointed out by #nIcEcOw, since Java 1.4 BorderLayout the use of new constants is highly encouraged:
PAGE_START
PAGE_END
LINE_START
LINE_END
CENTER
From How to Use BorderLayout tutorial (bold text mine):
Before JDK release 1.4, the preferred names for the various areas were
different, ranging from points of the compass (for example,
BorderLayout.NORTH for the top area) to wordier versions of the
constants we use in our examples. The constants our examples use are
preferred because they are standard and enable programs to adjust to
languages that have different orientations.
Update
Well now that your question has been edited to say that you actually use GridLayout it's easy to answer by saying that you can specify horizontal and vertical gaps between components either by using class' constructor: or setHgap() and setVgap() methods:
JPanel container1 = new JPanel(new GridLayout(2, 1, 8, 8));
// Or
GridLayout gridLayout = new GridLayout();
gridLayout.setRows(2);
gridLayout.setColumns(1);
gridLayout.setHgap(8);
gridLayout.setVgap(8);
JPanel container1 = new JPanel(gridLayout);
Don't forget to remove BorderLayout constraints when you add buttons to container1 panel, because those will be ignored:
container1.add(buttonDiary);
container1.add(buttonCars);
You might want to take a look to this topic as well: Providing white space in a Swing GUI
I have a problem because I want to put a small JPanel inside a different JPanel, but I can't get the small JPanel to show.
What am I missing?
this.setLayout(new BorderLayout(5,5));
this.cardsPanel= new JPanel();
this.cardsPanel.setBackground(Color.DARK_GRAY);
this.cardsPanel.setLayout(new FlowLayout (FlowLayout.CENTER,3,10));
this.cardsPanel2= new JPanel();
this.cardsPanel2.setBackground(Color.DARK_GRAY);
this.cardsPanel2.setLayout(new FlowLayout (FlowLayout.CENTER,3,10));
this.tablePanel=new JPanel();
this.tablePanel.setBackground(Color.PINK);
this.tablePanel.setLayout(new FlowLayout (FlowLayout.CENTER,5,5));
this.tablePanel1=new JPanel();
this.tablePanel1.setBackground(Color.ORANGE);
this.tablePanel1.setPreferredSize(new Dimension(100,100));
// this.tablePanel1.setLayout(null);
this.tablePanel1.add(tablePanel);
this.add(cardsPanel, BorderLayout.SOUTH);
this.add(cardsPanel2, BorderLayout.NORTH);
this.add(tablePanel,BorderLayout.CENTER);
Using that code:
Neither cardsPanel1 nor cardsPanel2 (dark gray) have any components (or therefore) any size. At 0x0 pixels size, they are invisible even when added to another container (unless the layout stretches them).
tablePanel (pink) should be visible so long as this is assigned enough space in whatever layout it is added to.
tablePanel1 (orange) should not be visible as it is never added to anything.
But as mentioned, for better help sooner, post an MCVE (Minimal Complete and Verifiable Example).
this.validate(); your root panel after adding new content.
I have a JFrame window, and I'd like to add a scrollable JTable towards the middle of it. I have a method, called collectionTableScrollPane() that generates the JScrollPane (and I know this is guaranteed to work).
I then proceed to add it to my mainPanel panel. However, I'd like there to be some forced 30px padding on the left and right of the JScrollPane. Logically, I would create a holding JPanel with a centred FlowLayout, and add Box.createHorizontalStrut(30) either side of the JScrollPane.
JPanel tableHolderPanel = new JPanel(new FlowLayout());
mainPanel.add(tableHolderPanel);
tableHolderPanel.add(Box.createHorizontalStrut(30));
tableHolderPanel.add(collectionTableScrollPane());
tableHolderPanel.add(Box.createHorizontalStrut(30));
However, I'm getting a strange result, where the JScrollPane in the middle of the window (denoted by the arrows) sort of becomes ineffectual.
Does anyone know what the problem is?
Note that the JTable contains four rows, of which only two are visible.
I had some issues in the past when i used a JScrollPane inside a panel with a FlowLayout. The behaviour could be tricky, when the content grow, the horizontal scrollbar may appear or the FlowLayout should add a new line.
In your case, i will replace the FlowLayout by a BorderLayout :
JPanel tableHolderPanel = new JPanel(new BorderLayout());
mainPanel.add(tableHolderPanel);
tableHolderPanel.add(Box.createHorizontalStrut(30), BorderLayout.WEST);
tableHolderPanel.add(collectionTableScrollPane(), BorderLayout.CENTER);
tableHolderPanel.add(Box.createHorizontalStrut(30), BorderLayout.EAST);
As far as I'm aware, Box is suppose to be used with the BoxLayout, this may be causing you some issues. Instead, why not use a EmptyBorder on the tableHolderPane
BoxLayout accepting size that came from JComponents, the same issue with default FlowLayout pre_implemented for JPanel
you have to returns PreferredSize by overrode JPanel nested JScrollPane,
use another LayoutManager, e.g. GridBagLayout or todays MigLayout
use NestedLayout, by using BorderLayout where you put two JLabels (e.i. that returns PreferredSize) to the EAST and WEST area
everything depends if you really to want to create the empty area and if shoud be resiziable or not