I have installed eclipse luna java EE for android development and have installed all the plugins and most of the software available. It was working fine untill today when i got the error while trying to open the activity_main.xml - "write access not allowed during rendering".
also this is the content of the exception stack trace :
Exception raised during rendering: com/android/layoutlib/bridge/impl/RenderSessionImpl
java.lang.ClassCastException: org.eclipse.osgi.internal.framework.EquinoxConfiguration$1 cannot be cast to java.lang.String
at org.eclipse.m2e.logback.configuration.LogHelper.logJavaProperties(LogHelper.java:26)
at org.eclipse.m2e.logback.configuration.LogPlugin.loadConfiguration(LogPlugin.java:189)
at org.eclipse.m2e.logback.configuration.LogPlugin.configureLogback(LogPlugin.java:144)
at org.eclipse.m2e.logback.configuration.LogPlugin.access$2(LogPlugin.java:107)
at org.eclipse.m2e.logback.configuration.LogPlugin$1.run(LogPlugin.java:62)
at java.util.TimerThread.mainLoop(Unknown Source)
at java.util.TimerThread.run(Unknown Source)
also it is worth mentioning that prior to this error i got a blue screen error in windows 8.1, which was "kernel security check failure". after that i did a memory check and found no problem. i have also installed the Genymotion emulator for android and have VT enabled in bios.
could you help me with this? thank you.
Finally i had to reinstall eclipse. The better way is to install each version of eclipse for the specific need and not to install a lot of unnecessary plugins. This according to me is the right way to use Eclipse.
If anyone has a better solution i would be happy to know it.
Related
Since updating my iPad to iOS 15, I can no longer run the debug version of my app on it (the prod version works fine). It gives me an error saying "The developer of this app needs to update it to work with this version of iPadOS."
Googling this error, I found a post about going to 64 bit by default to resolve this, back from 2017 (https://www.codenameone.com/blog/moving-to-64bit-by-default.html)
I checked my app settings and I don't have the hint that would force a 32bit build (ios.debug.archs=armv7). Is there anything else I can check to see why this is happening?
This is probably related to this: https://www.reddit.com/r/cn1/comments/ori4ve/ios_14_support/
Try the ios.zsign=true build hint.
I am trying to install db2 connect (Version 10.1) under Linux (Debian 9.5). After calling db2setup the user interface freezes at point 5 (language selection) of the menu. The problem occurs only with the installation type CUSTOM.
This error message is triggered in the /tmp/db2setup.err log when the Next button is pressed.
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
at com.ibm.db2.install.util.MessageHandler.handleMessage(Unknown Source)
at com.ibm.db2.install.util.MessageHandler.handleMessage(Unknown Source)
at com.ibm.db2.install.util.MessageHandler.handleError(Unknown Source)
at com.ibm.db2.install.gui.panels.FeaturePage.preValidate(Unknown Source)
at com.ibm.db2.install.gui.wizard.SetupWizardPanel.preValidatePage(Unknown Source)
at com.ibm.db2.install.gui.wizard.SetupWizardPanel.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2029)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2352)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:413)
at javax.swing.JToggleButton$ToggleButtonModel.setPressed(JToggleButton.java:319)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:263)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:300)
at java.awt.Component.processMouseEvent(Component.java:6515)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3332)
at com.ibm.db2.tools.common.sg.CustomToggleButton.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Component.java:6280)
at java.awt.Container.processEvent(Container.java:2240)
at java.awt.Component.dispatchEventImpl(Component.java:4871)
at java.awt.Container.dispatchEventImpl(Container.java:2298)
at java.awt.Component.dispatchEvent(Component.java:4697)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4843)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4503)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4433)
at java.awt.Container.dispatchEventImpl(Container.java:2284)
at java.awt.Window.dispatchEventImpl(Window.java:2724)
at java.awt.Component.dispatchEvent(Component.java:4697)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:718)
at java.awt.EventQueue.access$000(EventQueue.java:112)
at java.awt.EventQueue$3.run(EventQueue.java:677)
at java.awt.EventQueue$3.run(EventQueue.java:675)
at java.security.AccessController.doPrivileged(AccessController.java:226)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:87)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:98)
at java.awt.EventQueue$4.run(EventQueue.java:691)
at java.awt.EventQueue$4.run(EventQueue.java:689)
at java.security.AccessController.doPrivileged(AccessController.java:226)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:688)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:222)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:139)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:128)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:124)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:116)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:101)
This message appears in db2setup.log:
"TSAMP" is needed but cannot be found on the media.
What am I doing wrong? I also tried to make the selection with the keyboard only - with the same result.
Is it possible to install db2 connect without GUI?
Stackoverflow is for programming issues, you might try dba.stackexchange.com for non-programming matters.
According to IBM SPCR, the v10.1 of Db2-connect was supported on RHEL 5.6 & 6, also SLES 10 and 11 , and Ubuntu 10.04LTS , 12.04LTS.
It might work (or might not) on later versions of Linux, or Debian 9.5 , or might have issues that need workaraounds. You might not get official support via the IBM formal channels. If you intend to use for production, ensure your business formally accepts the risks of running an out-of-support product on operating-system for which it was not tested.
If possible, use a currently supported version of a Db2-connect edition. Check end of support dates with IBM.
Ensure you try with the final fixpack of V10.1 which is FP6 (free download from IBM - get the 'server fixpack' build fixpack, not the universal one,
the server fixpack is installable without needing the base product to be installed already).
Install as root, because non-root installs are troublesome.
Carefully verify all of the prerequisites especially the required packages, SElinux settings, kernel-parameters and all others mentioned in documentation.
To install without a GUI you have 2 options, either use db2setup with response-files, or use the command-line db2_install tool (deprecated, but still works). Both tools support additional detailed logging (tracing) which can help, refer to documentation for details.
If you already have a different working Db2-connect server, you can use its db2rspgn tool to generate a text response-file (which you can then edit as needed) and supply the modified response file to db2setup.
If you get installation/run issues, try dba.stackexchange.com.
To avoid the exception, the TSAMP option must be deselected (installation type: CUSTOM).
I'm using OS X Mavericks. I've installed apple's Java and JDK 8 and 7 from Oracle. Downloaded Android ADT. When I run eclipse, it shows me this error on build. I couldn't use eclipse.
Do you have any idea about that problem?
An internal error occurred during: "Building workspace". posix_spawn
is not a supported process launch mechanism on this platform.
java.lang.Error: posix_spawn is not a supported process launch mechanism on this platform.
at java.lang.UNIXProcess$1.run(UNIXProcess.java:105)
at java.lang.UNIXProcess$1.run(UNIXProcess.java:94)
at java.security.AccessController.doPrivileged(Native Method)
at java.lang.UNIXProcess.<clinit>(UNIXProcess.java:92)
at java.lang.ProcessImpl.start(ProcessImpl.java:130)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:1023)
at java.lang.Runtime.exec(Runtime.java:620)
at java.lang.Runtime.exec(Runtime.java:485)
at com.android.ide.eclipse.adt.internal.build.builders.PreCompilerBuilder.execAapt(PreCompilerBuilder.java:1225)
at com.android.ide.eclipse.adt.internal.build.builders.PreCompilerBuilder.handleResources(PreCompilerBuilder.java:1123)
at com.android.ide.eclipse.adt.internal.build.builders.PreCompilerBuilder.build(PreCompilerBuilder.java:720)
at org.eclipse.core.internal.events.BuildManager$2.run(BuildManager.java:733)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:206)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:246)
at org.eclipse.core.internal.events.BuildManager$1.run(BuildManager.java:299)
at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
at org.eclipse.core.internal.events.BuildManager.basicBuild(BuildManager.java:302)
at org.eclipse.core.internal.events.BuildManager.basicBuildLoop(BuildManager.java:358)
at org.eclipse.core.internal.events.BuildManager.build(BuildManager.java:381)
at org.eclipse.core.internal.events.AutoBuildJob.doBuild(AutoBuildJob.java:143)
at org.eclipse.core.internal.events.AutoBuildJob.run(AutoBuildJob.java:241)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:53)
The problem is special language characters (Probably i-İ in Turkish as in this case).
Here is how I solved step by step:
Change your preferred language to English as primary. (How to?)
Restart Mac.
Start Eclipse and create a project. (Your problem should have been
solved right now)
Close eclipse.
Change your preferred language to
Turkish.
Restart Mac.
Since the problem is only faced by Turkish users, I will also add translation of above as:
Problem dildeki özel karakterler (Muhtemelen Türkçe'deki i-İ harfi, bu durumda).
Adım adım çözüm:
Sistem dilinizi İngilizce'ye çevirin. (Nasıl mı?)
Mac a restart atın.
Eclipse i açın ve proje oluşturun. (Sorununuz bu aşamada çözülmüş olması lazım)
Eclipse i kapatın.
Sistem dilinizi Türkçe'ye çevirin.
Mac a restart atın.
The workaround for now is to run with -Djdk.lang.Process.launchMechanism=fork until this is resolved.
Instead of uninstalling the new JDK you can configure eclipse to use specific jdk by manipulating Eclipse.app/Contents/info.plist
Open info.plist with a text editor and add below line (I am adding 1.6.0 since I use jdk6, if you want to use jdk7 use 1.7.0)
<string>-vm</string><string>/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Commands/java</string>
in the beginning of array tag
<key>Eclipse</key>
<array>
you can configure Run Configuration if you want and pass vm argument as
"-Duser.language=us"
I had this issue on Mac OS 10 with Java SDK 1.8.0. Updating Java SDK solved my problem.
You had already solve your problem but If problem can occur again, change your region to USA. This is because of Turkish language's I and İ is different than English.
I'm trying to create an SWT Browser widget of the SWT.MOZILLA type under windows 8 64Bit with SWT 4.3 64Bit.
According to this, SWT 4.3 should support 64 Bit version on XULRunner 10.x or 24.x
So, I have downloaded both the 10.x and 24.x 64 versions from here and unzipped under c:\xulrunner10 and c:\xulrunner24 respectively.
If I start my java app pointing to xulrunner10 (using the VM argument -Dorg.eclipse.swt.browser.XULRunnerPath=C:\xulrunner10) it works, however if I try with xulrunner24 (using the VM argument -Dorg.eclipse.swt.browser.XULRunnerPath=C:\xulrunner24) I get the follwoing error:
Exception in thread "main" org.eclipse.swt.SWTError: XPCOM error 0x80004005
at org.eclipse.swt.browser.Mozilla.error(Unknown Source)
at org.eclipse.swt.browser.Mozilla.initXULRunner(Unknown Source)
at org.eclipse.swt.browser.Mozilla.create(Unknown Source)
at org.eclipse.swt.browser.Browser.<init>(Unknown Source)
I also noticed that I get the same error if pointing to unexisting directory, however the folder c:\xulrunner24 exists and contains all the files as well as xulrunner.exe.
How can I make xulrunner 24.x 64bit embeddable in my swt 4.3 app?
Got it!
It's an error on SWT wiki: xulrunner 24.x requires SWT 4.4.
I've installed swt-4.4M5 and now I can embed xurlrunner 24 64bit
I realize that this question is old and already has an accepted answer, but the download location mentioned in the question is no longer valid (http://wiki.mozilla-x86-64.com/Download), and the same issue has been posted about several times.
With 64-bit 4.3 SWT I was able to fix this exception by using XULRunner version 1.9.2.25 runtimes. Originally I found the download from here: https://osdn.net/projects/sfnet_runawfe/downloads/SRC%20and%20BIN%20files/extras/xulrunner-1.9.2.25-win64.zip/
However, I have also re-hosted it as xulrunner-1.9.2.25.en-US.win64.zip.
Full explanation posted in my answer here: https://stackoverflow.com/a/44848877/3300205
Looks like this might be Eclipse bug 411996 (same error and stack trace).
When I try to debug any project in Java EE INDIGO (64 bit) in win 7 and place a breakpoint somewhere the program acts as expected but when I hit f6 or f5 to go further eclipse throws an error which reads (I have Spring installed):
An internal error occurred during: "JDI Event Dispatch".
com.springsource.sts.groovy.debug.core.GroovyDebugProvider.isAlwaysInteretingLaunch()Z
(No typo, "Z" does appear)
Now I can't debug any program because it always gives this error. Can anyone help?
From the eclipse error log:
!MESSAGE com.springsource.sts.groovy.debug.core.GroovyDebugProvider.isAlwaysInteretingLaunch()Z
!STACK 0
java.lang.AbstractMethodError: com.springsource.sts.groovy.debug.core.GroovyDebugProvider.isAlwaysInteretingLaunch()Z
at org.eclipse.contribution.jdt.debug.DebugHooksAspect.isInterestingLaunch(DebugHooksAspect.aj:253)
at org.eclipse.contribution.jdt.debug.DebugHooksAspect.ajc$inlineAccessMethod$org_eclipse_contribution_jdt_debug_DebugHooksAspect$org_eclipse_contribution_jdt_debug_DebugHooksAspect$isInterestingLaunch(DebugHooksAspect.aj:1)
at org.eclipse.jdt.internal.debug.core.model.JDIDebugTarget.getStepFilters_aroundBody1$advice(JDIDebugTarget.java:195)
at org.eclipse.jdt.internal.debug.core.model.JDIDebugTarget.getStepFilters(JDIDebugTarget.java:1)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.attachFiltersToStepRequest(JDIThread.java:2154)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.createStepRequest(JDIThread.java:2065)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.createStepRequest(JDIThread.java:2040)
at org.eclipse.jdt.internal.debug.core.model.JDIThread$StepHandler.step(JDIThread.java:1989)
at org.eclipse.jdt.internal.debug.core.model.JDIThread.stepOver(JDIThread.java:1412)
at org.eclipse.jdt.internal.debug.core.model.JDIStackFrame.stepOver(JDIStackFrame.java:418)
at org.eclipse.debug.internal.core.commands.StepOverCommand.step(StepOverCommand.java:27)
at org.eclipse.debug.internal.core.commands.StepCommand.doExecute(StepCommand.java:34)
at org.eclipse.debug.core.commands.AbstractDebugCommand$1.run(AbstractDebugCommand.java:213)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)
This seems to be a similar bug to this bug in codehaus jira (see comments section). I was able to switch back to an older eclipse installation (from two weeks ago) to get rid of the current problem and will upgrade to Eclipse 3.7 as soon as time permits.
As crazy as this sounds, I too was getting this error when debugging an Android App and trying to step into a specific method, and resolved it by renaming the method I was trying to step into.
I had tried:
completely reinstalling the app
cleaning in Eclipse
reboot of device (phone), OS, and restart of Eclipse
increasing debug timeouts in Preferences | Java | Debug
My method was called "getMessageInfoFromDb"... and was in a class that didn't extend anything, but implemented Serializable ;-)
Try disabling simple step filtering, especially filtering of simple getters.
delete the Temp folder from yourlocalpath\domainfolder\server\AdminServer
domains\base_domain\servers\AdminServer
Have you done any DB import twice or more time on the same DB that you use for the application in which you are running in debug mode. Because I am also getting similar error with the caption JDI while starting Application Server with deployed .ear in Eclipse based IDE as a popup.
When db is imported twice user created tables gets imported if it's been tried in the same kind of databases. But Oracle App & System Specific tables throws error in process of importing. And some crash in that....
I hope this is what scenario yours as well....
In my scenario I had imported Oracle db from UNIX environment to Oracle XE in Windows environment.