I am using eclipse and I moved some projects(Projects with the name Mc Bot) in my workspace to another folder. However, when I open eclipse with my workspace, projects still appear like this in package explorer.
How can I fix that?
You cannot move project folders on your hard drive and expect Eclipse to update automatically. The folders contain metafiles that Eclipse needs to properly load the workspace on startup.
It is better to either rename/move the projects within Eclipse.
Or to remove and then re-add them to Eclipse's project management.
However, make sure to not accidentally delete the files from disk, when removing the old project from Eclipse. There is a checkbox within the confirmation dialog that - in this case - you should not check.
Especially when you are working with a code versioning system (such as Git or SVN), it is important to rename your files and folders within the code editor. Otherwise your repository might get out of sync.
I would just delete it here in eclipse (don't mark the checkbox to delete on disk) and then reimport it. So in this view from the screenshot just open the context-menu, say import and chose your projects again.
I am trying to import a project that me and my co-worker have been working on.. and keep getting this error after I select-- "import" then "import existing project" then click archive file, and then I click next, and this error comes up:
Some projects cannot be imported because they already exist in the
workspace
Uncheck the "copy projects into workspace" checkbox, and then click "refresh" button, you will be able to import the project
go to .project file in your project and change the name of the project in name tag
It has just happened to me too. Finally I realized that the project was already open in my workspace but it was not visible because of the selected working set. You have just to deselect the active working set and all opened projects will become visible.
This usually happens when you change the project directory physically without first delete in Eclipse.
You can view and delete these hidden projects in the following view:
Window -> Show View -> Other -> General -> Navigator
Then simply just continue with the process of import existing project.
In my case, I copied one of the projects (say 'Project1') from the workspace and pasted it to the same workspace. After that I modified the name of the pasted project (say to 'Project2'). I could not see it in the repository.
The main reason was .project file from the new project still had:
<name>Project1</name> instead of <name>Project2</name>.
So, I did following things in order to get the issue fixed:
Cut and paste Project2 outside the workspace
Change .project file to have <name>Project2</name>
Try importing Project2 again.
It worked for me.
You may have a project with same name in your workspace. Try to refresh (file->refresh) your workspace after deleting the another one with same name.
A typical situation occurs when you want to re-import a deleted project.
Projects in the Eclipse workspace must be unique. Note though that the project name need not be the same as the directory/folder name of the project, so you can either delete any existing project with the same name or alternatively rename the existing projects.
You have one occult directory named ".metadata" in workspace directory. Close Eclipse, delete ".metadata" and open Eclipse. When eclipse ask you about workspace make sure that ".metadata" isn't in workspace directory and click "ok" button to select default workspace.
Maybe you get the same project name in your '.project' file,check it,if yes, rename another name.than import again
If you've arrived at this because you have cloned a git project into the existing workspace and now you want to promote that workspace to a full fledged project then you should use the 'Git Repositories' view -> select 'Working Directory' -> Import Projects -> Existing projects.
Check if you have configured Eclipse to show ALL the working set. I once encountered exactly the same problem and it turned out I accidentally imported the project into the Other Projects working set. And my Eclipse configuration didn't show that working set in the package explorer, which lead me to believe that the project was not imported yet.
Updated for #Mawg:
First, click the Select Working Set...:
Then, choose No Working Sets:
This will effectively disable the working set and show all projects.
Try to rename the value of <name> tag which inside ".project" file of your project.
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>Rename this value</name>
<comment></comment>
<projects>
This will work for sure. Here you are just renaming your project.
EASIEST WAY: Right click on the project (folder that reads "MainActivity") go to Refactor -> Rename and you will get a text field allowing you to rename your project.
If you get an alert saying your project is out of sync with the filesystem press F5 (refresh) and try again.
Take a look in your workspace folder, you may have an old project there with the same name as the one you are importing (even though it's not being shown on eclipse).
When you delete a project on Eclipse, if you don't check the checkbox on the dialog, it just removes it from the view and doesn't delete the folder on the workspace directory.
In my case i had deleted the resources directory from my .metadata.plugins:
Go to your workspace
Enter .metadata.plugins
Delete : org.eclipse.core.resources directory
Another way I just found!
MOVE the project to some other folder and then import and if required copy to workspace
I had this issue when I deleted a project and tried to import the code again. Eclipse never really deleted the project and still held a reference to the project name/folder in the workspace. I had to created a new project with the same name and my code appeared as it was. I believe this only worked because the project path was never changed.
It was happened to me when
I delete project from eclipse Project Explorer and not checked the
remove content from disk.
Next time when I tried to import same project in workspace then got same problem.
To solve I just did FYI work that every kid can do :)
So How I solved it:
Cut Ctrl + x myProject folder from eclipse workspace to other location ie Desktop
Right Click Navigator (you can get it from Window > Show View > Navigator) and Refresh (it will prompt following dialog)
Just click Yes button and move your project folder back to eclipse workspace directory
Import again!
Now Rock 'n' Role
This warning means you just deleted project from navigator, but the project is present in the working set. Or else your working set has project with same name, so go to work-space directory and delete the project which has the same name and import again.
This worked for me.
File > New > Android Project > Create project from existing source
Location = the location of the project you want to import.
You will get a warning "An Eclipse project already exists in this directory.
Consider using File > Import > Existing Project instead." But you will be able to click "Next" and the project should in effect be imported.
In eclipse click file then select switch workspace then browse and select another folder. Now repeat the same process and this time there will be no error :)
I had a similar problem, I have the same repository I wanted to import twice. I renamed the existing project by right clicking on the project > refactor > rename then imported it again.
My problem was a little bit different.
For example, the project name (what I see) was FooProject and in the imported project, I was looking for the FooProject but I could not. However, Eclipse does not let me import that project because he claims that it is already imported. And then, I have looked at the .project file of the project and I have seen that the actual name of the project was not what I see (FooProject).
The conclusion;
The name of the project (what you see in Eclipse) may be different than the actual name of the project (what maven see). Because of this reason. Please be sure that they are the same name by checking .project file of the project.
Nothing about could not solve my situation. This is how I solved.
Close the IDE
Remove the same name project form workspace
Start the IDE
Clean all project (not sure this helped)
File > Import > Existing Project
click refresh button
import project
Done..
At least on Eclipse Juno, you can toggle on Advanced. Then select [groupid].[artifactid] from the Name Template dropdown. That should make your project uniquely named. (If you keep multiple versions of a given artifact, you can select [groupid].[artifactid].[version] instead). Be sure to click the Refresh button so the changes are visible. Wash, rinse, repeat as needed.
delete it from eclipse......u might have closed the project in eclipse by "(Rightclick)-->close project".....so even if you delete this project from workspace folder....it stays there in eclipse IDE as closed project.....you should delete it from Eclipse IDE...!!!
I have a slightly different situation whereby my eclipse stops responding and I have had to kill the session. After restarting Juno, then the particular project I was working on disappeared although .project file exists. Trying to import back into Eclipse would yield the same "Some projects cannot be imported .." or "A project with this name already exists" if trying to create a new project.
In the end, since I was using Working Sets, I managed to find this file .metadata.plugins\org.eclipse.ui.workbench\workingsets.xml. Manually added the missing entry and restarted eclipse and voila, it came back.
I had the same error because there was one more project under svn in workspace but with another name. So I've removed it.
This is what i have noticed for the above issue :- If the checkout folder (folder where your pom project resides) is same as the eclipse workspace folder then i am getting this issue
SOLUTION
when i used a separate workspace folder for importing the project, eclipse did worked smoothly :)
In case you are using Maven, make sure that your artifactId in pom.xml does not have the same name as any existing project name in your Eclipse project explorer.
I've been spending the past day trying to fix a corrupted eclipse workspace. I have it synched on dropbox and it's been working fine for a long time but recently there was a problem with some conflicting files in the .metadata folder and it messed up everything, my projects just stopped showing in my project explorer.
I ended up re-importing the projects into the workspace and they show fine in project view, but when I try to place them in working sets each project appears twice. If I delete one of the duplicates, the other one gets deleted as well. Anyone know how to resolve this issue? I'd rather not delete .metadata since that would erase all my settings and preferences.
If I were you, I'd start a fresh workspace. Use the preference export/import capabilities to ensure you retain all your favourite settings between workspaces.
I have never managed to save a corrupted workspace. Sometimes you've got to just let them go, like a rabid dog.
Check whether or not they are the same files shown twice. If this is the case then the solution is simple - go to 'Project Explorer' window, expand downward arrow to get the menu, then 'Project Presentation' -> 'Hierarchical'.
Today I see a strange behaviour of Eclipse 3.5.2 for the first time in 3 months.
First, when I run a main function, it runs a previously compiled version. Let's say I press Ctrl+F11 in the window with an open java class and existing main function. Usually it rebuilds the class and runs a new version. Today even if there was a compile mistake, it would run fine. So I guess it does not recompile the class.
Next, more strangely, if I intentionally make a mistake in the code and Eclipse underlines those lines in red, still the project Explorer does not mark them as containing errors. They remain of grey color if there were not any errors.
First I did not know how to solve this problem. I tried to reopen the project, restart Eclipse and finally reboot the OS. After the tenth attempt, after rebooting, Eclipse said that all project's files are "OUT OF SYNC with the file system". When I pressed "Refresh" - F5 on a project's header name in Project Explorer it finally marked all the files with errors as containing errors and running the main function gave the desired result.
An hour of my work passed and this happened again , with the other project. All the same. No marking of files as red, running no matter what old version of class with no compile errors.
And since Eclipse does not tell that files are out of sync, simply pressing F5 on a project cannot help.
What can you suggest?
When you select a project in the Project Explorer view and press F5, Eclipse should traverse the entire directory tree for the project checking that all files and directories all in sync. It does for me ...
The only thing I can think of that would cause this not to work is if you have file system timestamp anomalies. For example, if a file in the file system is updated but the file's last-modified shows that it was updated in the past. This kind of thing can happen if your machine's system clock is moved backwards or forwards at an inconvenient time. If you think this might have happened, try closing all projects, restarting Eclipse and doing another F5 refresh.
(I used to run into Eclipse synchronization issues a lot, but I put that down to a combination of flakey plugins and doing builds from the command line. Either F5 or Project>Clean usually works for me.)
It is also worth checking that you haven't turned off "Build automatically"; see https://stackoverflow.com/a/2818290/139985. This is not a "refresh" problem, but it would be easy to confuse it with one.
Is Build automatically on? (Menu > Project > Build automatically)
It happened to me because there was a cyclic dependency between two projects. Each project had the other on its build path.
Solution: Reimport the project
It happened to me when checking out a new file from svn in explorer. Eclipse could not find the new file for some reason.
I tried refreshing the project(F5) and Project > Clean and build the project(Project > Build All) none of these worked for me.
So I deleted the project from the Project Explorer view(Not from hard disk). Make sure you unselect "Delete project contents on disk(cannot be undone)" checkbox and save any unsaved changes before you do this.
Now reimport the project using File > Import option. That should work in most cases.
If you use gradle, or something similar, instead of reimporting a project you can just regenerate the project files (gradle eclipse for example), and then you can refresh the project. Less cumbersome than deleting and reimporting.