I have installed OpenJRE Version 8 on my machine. When I say installed I mean I extracted the files from the zip and copied them to my test machine. I then set the PATH and JAVA_HOME variables to point to this new location. However none of the applications that previously ran with the regular Oracle Java will run with this Open version. Any ideas as to what I can do to fix this issue is appreciated. My work has tasked me with this and I'm just not that familiar with all the ins and outs of Java. Thanks!
please can anyone help me with this installation error
Error 1332. the cabinet file 'sj180600.cab' required for this
installation is corrupt and cannot be used. this could indicate a
network error, an error reading from the CD-ROM, or a problem with
this package
I got this error when trying to install the java jdk
is not because of Issue in JDK setup or as such.
Some of the reasons may be:
Some research suggests that this problem may arise because of bad RAM.
Source - https://forum.openoffice.org/en/forum/viewtopic.php?f=15&t=65872
This is a Windows Installer error that may occur for different cabinet file names located on the installation media (usually on CD).
Source - error-1335-the-cabinet-file-filecab-required-for-this-installation-is-corrupt-and-cannot-be-used-this-could-indicate-a-network-error-an-error-reading-from-the-cd-rom-or-a-problem-with-this-package
Can be caused by User Access Control.
Source - http://www.symantec.com/connect/forums/error-error-1335the-cabinet-file-data1cab-required-installation-corrupt-and-cannot-be-used-co
Corrupted installer caused by a firewall or virus software running on your computer.
Source - http://www.tomshardware.com/forum/7992-63-error-1335-help
Occur when the installer is unable to access the necessary files from the DVD/CD-ROM drive.
Source - http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html
Each link has its own list of steps to resolve the Issue. Not sure what may be causing Issue in your case.
You can try different solutions and see if any one can help.
Thanks!!
I got following error while installing JDK 1.7 on windows 8.
"Error 1335. The cabinet file 'st170510.cab' required for this
installation is corrupt and cannot be used. This could indicate a
network error, an error reading from the CD-ROM, or a problem with
this package."
I have downloaded latest version of JDK from oracle foundation. previously JDK 1.6 was installed on my pc. I uninstalled it and tried to install this version and met this error.
For further information, I have already installed JRE 1.7 on my system.
Error:
"Error 1335. The cabinet file 'st170510.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package."
is not because of Issue in JDK setup or as such.
Some of the reasons may be:
Some research suggests that this problem may arise because of bad RAM.
Source - https://forum.openoffice.org/en/forum/viewtopic.php?f=15&t=65872
This is a Windows Installer error that may occur for different cabinet file names located on the installation media (usually on CD).
Source - error-1335-the-cabinet-file-filecab-required-for-this-installation-is-corrupt-and-cannot-be-used-this-could-indicate-a-network-error-an-error-reading-from-the-cd-rom-or-a-problem-with-this-package
Can be caused by User Access Control.
Source - http://www.symantec.com/connect/forums/error-error-1335the-cabinet-file-data1cab-required-installation-corrupt-and-cannot-be-used-co
Corrupted installer caused by a firewall or virus software running on your computer.
Source - http://www.tomshardware.com/forum/7992-63-error-1335-help
Occur when the installer is unable to access the necessary files from the DVD/CD-ROM drive.
Source - http://helpx.adobe.com/creative-suite/kb/install-error-1311-1335-or.html
Each link has its own list of steps to resolve the Issue.
Not sure what may be causing Issue in your case.
You can try different solutions and see if any one can help.
Thanks!!
I think it has something to do with Windows "unblock" feature. (Rich click on file, select "unblock")
We had this issue before when we downloaded a Zip file, extracted an installed, and ran it - it failed - we had to unblock the file first - we also noticed that extracted elements were also "blocked" as well.
Java Install >>- On downloading using windows, file transfer speed was fast until the very end. then it seemed to stall.
Any attempt to install from these files produced errors and a fail.
Fix >>- I then downloaded it using a MAC and then transferred the files back to the windows box and did the install again.
This time it was perfect - no errors - good install.
Rob
I was installing Oracle Java 8 JDK (version 111) on a Windows 10 machine. I got the same error as described in the question.
I disabled windows defender (all checkboxes to off), downloaded the file, went to its properties clicked unblock and apply. Then the JDK installed fine.
I had the same problem. After reading all the answers, I concluded that the downloaded .exe file was getting corrupt each time I download. Initially I used Internet Edge for the download (like 5 times) and I had the problem every time. The problem got solved when I switched to chrome browser, downloaded and installed again.
I faced the same problem, but with 1.8 on windows 7 (tried with jdk8u91 and jdk8u92). None of the other solutions here worked, but unchecking the "source code" and "public jre" options caused the error to not occur. Not a complete solution if you need the source code - the jre is available separately anyway - but it got me through the installer, and the jdk seems functional.
When you meet this problem ,you compare the two files with WinMD5Free after downloading them.
At first I used chrome and IDM to download the JDK files and always met with an error although I changed other versions many times.
Hence I use Firefox download the JDK file and problems are resolved.
^_^
OS: Windows 10 Pro
Java: 10.0.1
When trying to run the JDK installer from the "Downloads" folder I kept running into the same error (only different .cab file). I tried running as admin, different compatibility mode, scanning with the Windows scanner. Nothing helped.
Then I just downloaded to Desktop. I ran it as Administrator and Java installed without any problem.
after spending a day reading here and there I decided to ask help as I could not find a solution to my problem.
I have to create a java/swt application embedding a browser with full HTML5 support. That works out of the box on both linux and osx with SWT.NONE browser type (using webkit).
Unfortunatelly I have lot of troubles on windows.
First let me say that I'm using SWT 4.2.x on windows 8 64 bit.
To make SWT browser work with webkit I had to install 32bit JVM and manually point to it (as the -d32 switch on default 64bit JVM says that no 32 bit JVM is installed). ALso installed Safari.
And also I had to use 32bit SWT library. WHen finally I got it run I discovered that Safari for windows does not support drag and drop as experienced and stated here:
http://www.w3schools.com/html/html5_draganddrop.asp
So I decided to switch to mozilla. According to Eclipse/SWT documentation I have downloaded and installed XULRunner 1.8.0.1. I have unzipped it into C:\Program Files (x86)\Mozilla\XULRunner\1.8.0.1\xulrunner and run xulrunner --register-user (and also --register-global)
Finally in my code I added
System.setProperty("org.eclipse.swt.browser.DefaultType", "mozilla");
I have also set a global environment variable "MOZILLA_FIVE_HOME" pointing to the same XULRunner installation dir.
But then, when I run my java program (32bit JRE, 32bit SWT) I get
Exception in thread "main" org.eclipse.swt.SWTError: No more handles [MOZILLA_FIVE_HOME may not point at an embeddable GRE]
How can I fix that?
Thanks in advance!
EDIT:
I was running command prompt not as administrator and xulrunner was not registering. Doing as administrator, worked. However I'm still in trouble: XULRunner 1.9.x seems not to support HTML5. For example element.children is not supported.
I managed installing XULRunner 10.0.2 that seems to have the required support. However as soon as I click into my embedded browser, the application just crashes without printing any error on java output console...
I need to find a solution in order to use either ecent version of mozilla or recent version of webkit on windows
Ok, loading XURLRunner 10.0.2 works. The crashing app was due to a stack overflow error in my js code.
I too am trying to embed XULRunner into my eclipse plug-in, with no luck (currently). I came across your answer here. Just wanted to comment that it is not reasonable that you executed
xulrunner --register-user
nor
xulrunner --register-global
on the XULRunner 10.X since according to this post
https://stackoverflow.com/a/7567781/1743693
the support on installing the XULRunner system-wide was removed (which was a good step IMHO)
Trying to execute the aforementioned commands will result
"Error: couldn't parse application.ini"
As for my problem: I keep running into the runtime error:
Can't load library:
C:\Users\david\.swt\lib\win32\x86_64\swt-xulrunner-win32-4236.dll
C:\Users\david\.swt\lib\win32\x86_64\swt-xulrunner-win32.dll: Can't
load IA 32-bit .dll on a AMD 64-bit platform
And I can't figure out where this is coming from.
I'm running a VirtualBox with Windows 8 64bit
If you can elaborate more on what solved your issue with that - i would really appreciate that.
Thanks.
Up until recently, I was able to launch/open JNLP files in Firefox using Java web start.
Don't know what happened all of a sudden JNLP files stopped launching, a splash screen appears saying Java Starting... and then nothing happens. Even the Java Console in the browser and javacpl.cpl applet doesn't open.
Tried all possibilities: removed all older version and installed the latest JRE (java version "1.6.0_17"), still it doesn't work.
Done some googling for this problem, people suggested to start javaws.exe with -viewer option but same behavior (a splash screen appears saying "Java Starting..." and then disappears)
The problem is that I don't know any place (logs etc.) to look for to see what is causing the problem.
I am using WinXP SP3, and some of the screenshots below shows further info about my system.
I can provide any other detail if required but please help me solve this problem.
Have a look at what happens if you run javaws.exe directly from the command line.
I know this is an older question but this past week I started to get a similar problem, so I leave here some notes regarding the solution that fits me.
This happened only in some Windows machines using even the last JRE to date (1.8.0_45).
The Java Web Start started to load but nothing happened and none of the previous solution attempts worked.
After some digging i've found this thread, which gives the same setup and a great explanation.
https://community.oracle.com/thread/3676876
So, in conclusion, it was a memory problem in x86 JRE and since our JNLP's max heap was defined as 1024MB, we changed to 780MB as suggested and it was fixed.
However, if you need more than 780MB, can always try launching in a x64 JRE version.
i had the same problem here. go to your Java Control Panel and Settings... Uncheck 'Keep temporary files on my computer'. Apply changes and try again your .jnlp
Note: Tested on different machines; Windows Server 2012, Windows Server 2008 and Windows 7 64bit.
Java Version: 1.7++ since my jnlp app is built on 1.7
Please let me know your feedback too. :D
Java web start should be enabled.
Check if javaws (Java web start is enabled for your system), Use below command in console to open java control panel.
javaws -viewer
If javacpl does not open and gives you Could not find the main class:, it could be that Java is confused because of changes in deployment.properties (can be found in C:\Users\<username>\AppData\LocalLow\Sun\Java\Deployment on Win7). Delete that file and everything's fine.
This bug seems to be 6 years old, cf. An app should be able to ignore properties that have become obsolete over time, shouldn't it?
Although this question is bit old, the issue was caused by corrupted ClearType registry setting and resolved by fixing it, as described in this ClearType, install4j and case of Java bug post.
ClearType, install4j and case of Java bug Java
Do you know what
ClearType (font-smoothing technology in Windows) has in common with
Java (programming language and one of the recommended frameworks)?
Nothing except that they were working together hard at making me
miserable for few months. I had some Java software that I couldn’t
install. I mean really couldn’t – not even figure out reason or
reproduce it on another PC.
Recently I was approved for Woopra beta (site analytics service) and
it uses desktop client written in Java… I couldn’t install. That got
me really mad. :)
Story All of the software in question was similar :
setup based on install4j; setup crashing with bunch of errors. I was
blaming install4j during early (hundred or so) attempts to solve
issue. Later I slowly understood that if it was that bugged for that
long time – solution would have been created and googled.
Tracing After shifting focus from install4j I decided to push Java
framework. I was trying stable versions earlier so decided to go for
non-stable 1.6 Update 10 Release Candidate.
This actually fixed error messages but not crashes. I had also noticed
that there was new error log created in directory with setup files.
Previously I had only seen logs in Windows temporary directory.
New error log was saying following :
Could not display the GUI. This application needs access to an X
Server. If you have access there is probably an X library missing.
******************************************************************* You can also run this application in console mode without access to an
X server by passing the argument -c Very weird to look for X-Server on
non-Linux PC, isn’t it? So I decided to try that “-c” argument. And
was actually able to install in console mode.
Happy ending? Nope. Now installed app was crashing. But it really got
me thinking. If console works but graphical interface doesn’t – there
must be problem with latter.
One more error log (in application folder) was now saying (among other
things) :
Caused by: java.lang.IllegalArgumentException: -60397977 incompatible
with Text-specific LCD contrast key Which successfully googled me
description of bug with Java unable to read non-standard ClearType
registry setting.
Solution I immediately launched ClearType Tuner from Control Panel and
found setting showing gibberish number. After correcting it to proper
one all problems with Java were instantly gone.
cleartypetuner_screenshot Lessons learned Don’t be fast to blame
software problems on single application. Even minor and totally
unrelated settings can launch deadly chain reactions. Links Jave
Runtime Environment http://www.java.com/en/download/index.jsp
ClearType Tuner
http://www.microsoft.com/windowsxp/downloads/powertoys/xppowertoys.mspx
Woopra http://www.woopra.com/
install4j
http://www.ej-technologies.com/products/install4j/overview.html
I was also facing the same problem. To fix this to the following steps.
open Javaws from cmd runnig javaws -viewer command. A new window will open
Select the jnlp file which you want and click the run button.
Close the javaws viewer window.
Same solution worked as suggested by hpereira
The issue was due to JRE version was 32 bit and not 64 Bit
Check with java -version to see if your Java is 64 bit
C:\>java -version
java version "1.8.0_192"
Java(TM) SE Runtime Environment (build 1.8.0_192-b12)
Java HotSpot(TM) **64-Bit Server** VM (build 25.192-b12, mixed mode)
Is this an application to which you have the code? Java 6u14 included a change to the way it handles jar security that for us caused very similar issues. If your jars are signed and work with Java 6u13 or below, you might consider either refactoring your code to work around this update or requiring Java 6u13 or below. Unfortunately I don't recall exactly what we did to resolve the issue - it was panic mode at the time.
Again, if you have the code you have tools to work with. You can put in System.out.println statements in your startup routines - anything console output is displayed in the command window when you run the JNLP from the command line. Otherwise you might consider using a nice logger like log4j to get a better idea of the point of failure.
You may also consider removing the application entirely and downloading it anew. Java Web Start has a Control Panel applet that allows you to see the URL your app is downloading from (could be the wrong one), uninstall the app, set security options, etc.
I had the exact same problem. Turned out that the max-heap-size was set to 1024 and missing the unit. The configuration needed to be max-heap-size=1024m.
So apparently invalid memory configuration in the jnlp file will cause this exact behavior.
In my case, the problem was caused by starting my app from a shortcut on the public desktop (windows 7). As a result, as far as I can tell, the temporary files location was set to c:\users\public\etc. This resulted in the unable to write to cache detail. When I reset to defaults in the temporary files control applet, all worked fine.
In my case, Netbeans automatically creates a .jnlp file that doesn't work and my problem was due to an accidental overwriting of the launch.jnlp file on the server (by the inadequate and incorrect version from Netbeans). This caused a mismatch between the local .jnlp file and the remote .jnlp file, resulting in Java Web Start just quitting after "Verifying application."
So no one else has to waste an hour finding a bug that should be communicated adequately (but isn't) by Java WS.
This can also be due to environment variable CATALINA_HOME in your system. In our organization there were several cases where JNLP applications just refused to start without logging anything and emptying CATALINA_HOME solved the issue.
I had the environment variable set in the command prompt and it didn't appear in GUI. I'm not sure if setx command or register removal commands did the trick. Restart seems to be necessary after removing the variable.
I believe this is a security problem. If I download the jnpl file and execute it after a clean java 8 installation via javaws myfile.jnpl everything is working fine (I get multiple windows where I have to confirm some security problems).
I wanted to share the root cause for my issue. I was using High DPI in Windows and this caused JNLP to not launch. I had to turn off High DPI for this to work. Hope this helps.
Try Java Web Launcher, rather than Java Web Start Launcher. It worked for me.
Right-click on the JNLP file that is not opening and select Open With.
In the ‘How you want to open this File’ window, scroll down and click on Look for another app on this PC option.
When the File Explorer window opens, navigate to the following location:
C:\Program Files (x86)\Java\jre1.8.0_261\bin
or the folder for 64bit version
Select javaws.exe and click the Open button. This will open the JNLP file as intended.
Make sure to check the Always use this app to open .jnlp files.
That's all.