I am trying to add user ip verification during login process. If ip address of the user is not in the database the application should reject the authentication.
The problem: Given the setup below it turns out that auth.authenticationProvider() is not replacing the default DaoAuthenticationProvider, but adds UserIpAuthenticationProvider as a first AuthenticationProvider in the list.
In the case when username/password combination is incorrect the framework ends up calling UserDetailsService.loadUserByUsername() twice, once from UserIpAuthenticationProvider, another time from internal DaoAuthenticationProvider which throws the final BadCredentialsException().
The question: is there any setting that can be set in Spring Boot so that Spring Security does not add it's own internal instance DaoAuthenticationProvider, but only use my UserIpAuthenticationProvider, which already has all the necessary functionality (perhaps by somehow replacing AuthenticationManagerBuilder to be able to override userDetailsService() method?).
public <T extends UserDetailsService> DaoAuthenticationConfigurer<AuthenticationManagerBuilder,T> userDetailsService(
T userDetailsService) throws Exception {
this.defaultUserDetailsService = userDetailsService;
return apply(new DaoAuthenticationConfigurer<AuthenticationManagerBuilder,T>(userDetailsService));
}
Configuration: In my understanding, UserDetailsService is supposed to provide all the necessary details about the user so that AuthenticationProvider can make a decision whether the authentication was successful or not.
Since all the necessary information is loaded from the database, it seems natural to extend DaoAuthenticationProvider and add an additional verification in overriden additionalAuthenticationChecks() method (white-listed IP list is in the database, so they are loaded as part of the user object in IpAwareUser).
#Named
#Component
class UserIpAuthenticationProvider extends DaoAuthenticationProvider {
#Inject
public UserIpAuthenticationProvider(UserDetailsService userDetailsService)
{
...
}
#SuppressWarnings("deprecation")
protected void additionalAuthenticationChecks(UserDetails userDetails,
UsernamePasswordAuthenticationToken authentication) throws AuthenticationException {
super.additionalAuthenticationChecks(userDetails, authentication);
WebAuthenticationDetails details = (WebAuthenticationDetails) authentication.getDetails();
IpAwareUser ipAwareUser = (IpAwareUser) userDetails;
if (!ipAwareUser.isAllowedIp(details.getRemoteAddress()))
{
throw new DisabledException("Login restricted from ip: " + details.getRemoteAddress());
}
}
}
This is injected into SecurityConfiguration:
#Configuration
#EnableGlobalMethodSecurity(prePostEnabled = true)
#EnableWebSecurity
public class SecurityConfiguration extends WebSecurityConfigurerAdapter {
#Override
protected void configure(HttpSecurity http) throws Exception {
http.addFilter(authenticationFilter);
http.authorizeRequests()
.antMatchers("/", "/javascript/**", "/css/**").permitAll()
.antMatchers("...").access("...")
.anyRequest().authenticated()
.and().formLogin().loginPage("/").permitAll()
.and().logout().invalidateHttpSession(true).deleteCookies("JSESSIONID").permitAll()
.and().csrf().disable()
;
}
#Inject
private UserDetailsService userDetailsService;
#Inject
private UserIpAuthenticationProvider userIpAuthenticationProvider;
#Inject
private JsonUsernamePasswordAuthenticationFilter authenticationFilter;
#Bean
public JsonUsernamePasswordAuthenticationFilter authenticationFilter() {
return new JsonUsernamePasswordAuthenticationFilter();
}
#Override
protected void configure(AuthenticationManagerBuilder auth) throws Exception {
auth.authenticationProvider(userIpAuthenticationProvider);
auth.userDetailsService(userDetailsService);
}
#Bean
#Override
public AuthenticationManager authenticationManagerBean() throws Exception {
return super.authenticationManagerBean();
}
#Bean
public AuthenticationSuccessHandler authenticationSuccessHandler() throws Exception {
return new JsonAuthenticationSuccessHandler();
}
#Bean
public AuthenticationFailureHandler authenticationFailureHandler() throws Exception {
return new JsonAuthenticationFailureHandler();
}
}
and application configuration:
#Configuration
#EnableAutoConfiguration
#ComponentScan(basePackageClasses = {SecurityConfiguration.class, DataController.class, DaoService.class})
public class Application extends SpringBootServletInitializer {
#Override
protected SpringApplicationBuilder configure(SpringApplicationBuilder application) {
return application;
}
}
Any guidance on this will be much appreciated.
The comments on the question contained the answer:
#ArunM: your project gave me an idea: I do not need to call auth.userDetailsService(userDetailsService); in SecurityConfiguration.configure(), which will prevent creation of internal DaoAuthenticationProvider! My UserIpAuthenticationProvider can get instance of UserDetailsService via injection.
The AuthenticationManagerBuilder.userDetailsService method does not only set the default UserDetailsService but also applies a DaoAuthenticationConfigurer which registers the DaoAuthenticationProvider.
If you want a customized DaoAuthenticationProvider, pass the UserDetailsService to the provider in the constructor or inject it. And to prevent the default DaoAuthenticationProvider from being registered, don't call AuthenticationManagerBuilder.userDetailsService.
This is also mentioned in this Spring Security issue.
Defining your own DaoAuthenticationProvider
#Bean
public DaoAuthenticationProvider daoAuthenticationProvider() {
return new UserIpAuthenticationProvider();
}
should replace the Spring Boot default instance (not that the bean type is DaoAuthenticationProvider and not UserIpAuthenticationProvider)
Related
I'm trying to create a spring security configuration with two different AuthenticationProviders and exposing a rest interface to verify credentials (this is just used in the dev environment and will be replaced by an oAuth service in prod.) But when I inject the AuthenticationManager into the Controller, spring creates a default AuthenticationManager and injects it into the RestController. How can I make spring inject the AuthenticationManager configured in the WebSecurityConfigurationAdapter? I'm using spring-boot-starter-security:1.5.7.RELEASE. Here is my security configuration:
#EnableWebSecurity
#EnableGlobalMethodSecurity(prePostEnabled = true)
#Order(SecurityProperties.ACCESS_OVERRIDE_ORDER)
#Configuration
public class LocalWebSecurityConfigurationAdapter extends WebSecurityConfigurerAdapter {
private final DevUserDetailsService devUserDetailService;
private final ServiceUserDetailService serviceUserDetailService;
#Autowired
public LocalWebSecurityConfigurationAdapter(DevUserDetailsService devUserDetailService, ServiceUserDetailService serviceUserDetailService) {
this.devUserDetailService = devUserDetailService;
this.serviceUserDetailService = serviceUserDetailService;
}
#Override
protected void configure(HttpSecurity http) throws Exception {
http.csrf().disable()
.sessionManagement().sessionCreationPolicy(SessionCreationPolicy.STATELESS)
.and().authorizeRequests().antMatchers("/api/public/**").permitAll()
.antMatchers("/api/login").permitAll()
.antMatchers("/api/**").fullyAuthenticated()
.anyRequest().permitAll()
.and().exceptionHandling().authenticationEntryPoint(unauthorizedEntryPoint())
.and().httpBasic();
}
#Bean
public AuthenticationEntryPoint unauthorizedEntryPoint() {
return (request, response, authException) -> response.sendError(HttpServletResponse.SC_UNAUTHORIZED);
}
#Override
public void configure(AuthenticationManagerBuilder auth) throws Exception {
auth.userDetailsService(devUserDetailService);
DaoAuthenticationProvider serviceUserAuthProvider = new DaoAuthenticationProvider();
serviceUserAuthProvider.setUserDetailsService(serviceUserDetailService);
serviceUserAuthProvider.setPasswordEncoder(passwordEncoder());
auth.authenticationProvider(serviceUserAuthProvider);
}
#Bean
public PasswordEncoder passwordEncoder() {
return new BCryptPasswordEncoder();
}
And here is my RestController:
#RestController
#RequestMapping("/api/login")
public class LoginController {
private final Logger log = LoggerFactory.getLogger(this.getClass());
private final AuthenticationManager authenticationManager;
public LoginController(AuthenticationManager authenticationManager) {
this.authenticationManager = authenticationManager;
}
#RequestMapping(method = RequestMethod.POST)
public Map<String, String> login(#RequestBody Map<String, String> body) {
String user = body.get("user");
UsernamePasswordAuthenticationToken token = new UsernamePasswordAuthenticationToken(user, body.get("password"));
try {
authenticationManager.authenticate(token);
return Collections.singletonMap("status", "ok");
} catch (BadCredentialsException e) {
return Collections.singletonMap("status", "bad credentials");
} catch (AuthenticationException e) {
log.warn("Could not authenticate user {} because {}.", user, e.getMessage(), e);
return Collections.singletonMap("status", "general error");
}
}
}
And since you guys are probably experts in spring, is there a best practice to create different security configurations depending on the environment (using the profile) the code is running on without creating redundant code? I tried a super class, but spring didn't like that a lot.
I finally found a solution. By using configureGlobal inside my configuration class the AuthenticationManager gets shared across all spring managed Components.
#Autowired
public void configureGlobal(AuthenticationManagerBuilder auth, DevUserDetailsService devUserDetailService,
#Qualifier("serviceUserAuthenticationProvider") AuthenticationProvider serviceUserAuthProvider) throws Exception {
auth.userDetailsService(devUserDetailService);
auth.authenticationProvider(serviceUserAuthProvider);
}
For reusing configuration, I still didn't find a good solution. Creating an abstract “super configuration” for all the common configuration is creating troubles as soon as a method is annotated with #Bean and creating multiple WebSecurityConfigurerAdapter results in one overwriting the other, so if there is a best practice, I'm still interested in a proper solution. I've managed to do what I wanted, but it still feels like a little of a hack to me. For anyone stumbling across a similar issue I hope this helps a little.
Declare the bean in LocalWebSecurityConfigurationAdapter:
#Bean(name="appAuthenticationManager")
#Override
public AuthenticationManager authenticationManagerBean() throws Exception {
return super.authenticationManagerBean();
}
and inject it other components just like any other bean:
public LoginController(#Qualifier("appAuthenticationManager") AuthenticationManager authenticationManager) {
this.authenticationManager = authenticationManager;
}
I am using Spring Security OAuth2 for authorizations. When trying to refresh the token I get an error: UserDetailsService is required (interestingly I get this error only on unix machines and not on windows). I am using Spring OAuth2 version 2.0.7.
For some reason the AuthenticationManager in the DefaultTokenService is not empty and it tries to authenticate the user to check if he still exists. I think it gets initialized because of some spring security vs. spring oauth2 configuration problems.
I am not using any custom UserDetailsService, hence it should not authenticate the users at this point. However, when I debug it I see that it tries to use one from the WebSecurityConfigurerAdapter and gets to this error. Even if I provide my custom dummy UserDetailsService, it is not using that one, but tries to use the other one, which is null. Am I missing here something? I can not find out why is this happening?
Here is my Oauth2 configuration
#Configuration
#EnableAuthorizationServer
public class OAuth2Config extends AuthorizationServerConfigurerAdapter {
#Autowired
private MySpringTokenStore tokenStore;
#Autowired
private AuthenticationManager authenticationManager;
#Autowired
private MyClientDetailsServiceImpl clientDetailsService;
#Override
public void configure(AuthorizationServerEndpointsConfigurer endpoints) throws Exception {
endpoints.tokenStore(tokenStore);
endpoints.authenticationManager(authenticationManager)
.approvalStoreDisabled();
}
#Override
public void configure(ClientDetailsServiceConfigurer clients) throws Exception {
clients.withClientDetails(clientDetailsService);
}
#Override
public void configure(AuthorizationServerSecurityConfigurer security) throws Exception {
security.allowFormAuthenticationForClients();
}
#Bean
public TokenStore tokenStore() {
return new InMemoryTokenStore();
}
}
Here is my Spring security configuration
#Configuration
#EnableWebSecurity
public class SecurityConfig extends WebSecurityConfigurerAdapter {
#Override
protected void configure(HttpSecurity http) throws Exception {
// #formatter:off
http
.authorizeRequests()
.antMatchers("/myRest/events/**", "/events/**", "/events", "/myRest/events").permitAll()
.antMatchers("/login.jsp", "/login").permitAll()
.and()
.csrf().requireCsrfProtectionMatcher(new AntPathRequestMatcher("/oauth/authorize")).disable()
.csrf().requireCsrfProtectionMatcher(new AntPathRequestMatcher("/myRest/events")).disable()
.sessionManagement().sessionFixation().none();
// #formatter:on
}
#Override
public void configure(WebSecurity web) throws Exception {
web.ignoring().antMatchers("/index*", "/myRest/events/**", "/events/**", "/myRest/events", "/events", "/swagger/**", "/kibana/**",
"/elastic/**", "/version/**", "/api-docs/**", "/js/**", "/oauth/uncache_approvals", "/oauth/cache_approvals");
}
}
Authorization server endpoint needs UserDetailsService. In your OAuth2Config class configure user details service like the following:
#Autowired
private UserDetailsService userDetailsService;
#Override
public void configure(AuthorizationServerEndpointsConfigurer endpoints) throws Exception {
endpoints.tokenStore(tokenStore);
endpoints.userDetailsService(userDetailsService);
endpoints.authenticationManager(authenticationManager)
.approvalStoreDisabled();
}
You can also configure it in WebSecurityConfigurerAdapter:
#Autowired
private AuthorizationServerEndpointsConfiguration endpoints;
#Override
protected void configure(HttpSecurity http) throws Exception {
if (!endpoints.getEndpointsConfigurer().isUserDetailsServiceOverride()) {
UserDetailsService userDetailsService = http.getSharedObject(UserDetailsService.class);
endpoints.getEndpointsConfigurer().userDetailsService(userDetailsService);
}
// #formatter:off
http
.authorizeRequests()
.antMatchers("/myRest/events/**", "/events/**", "/events", "/myRest/events").permitAll()
.antMatchers("/login.jsp", "/login").permitAll()
.and()
.csrf().requireCsrfProtectionMatcher(new AntPathRequestMatcher("/oauth/authorize")).disable()
.csrf().requireCsrfProtectionMatcher(new AntPathRequestMatcher("/myRest/events")).disable()
.sessionManagement().sessionFixation().none();
// #formatter:on
}
Adding on to #VijayaNandwana's answer and considering #FilipMajernik's comment,
I created a class for OAuthConfig and made the order less than the class which extends WebSecurityConfigurerAdapter.
#Configuration
#Order(1)
public class OAuthConfig extends AuthorizationServerConfigurerAdapter {
#Autowired
private UserDetailsService userDetailsService;
#Autowired
private JdbcTemplate jdbcTemplate;
#Bean
public TokenStore tokenStore() {
return new JdbcTokenStore(jdbcTemplate.getDataSource());
}
#Autowired
private AuthenticationManager authenticationManager;
#Override
public void configure(AuthorizationServerEndpointsConfigurer endpoints) throws Exception {
endpoints.tokenStore(tokenStore());
endpoints.userDetailsService(userDetailsService);
endpoints.authenticationManager(authenticationManager)
.approvalStoreDisabled();
}
}
And Class which extends WebSecurityConfigurerAdapter
#Configuration
#EnableWebSecurity
#Order(2)
public class SecurityConfig extends WebSecurityConfigurerAdapter {
//Configurations
}
If implementing custom DefaultTokenServices, we don't need UserDetailsService.
#Configuration
public class AuthorizationServerConfig extends AuthorizationServerConfigurerAdapter {
#Override
public void configure(final AuthorizationServerEndpointsConfigurer endpoints) throws Exception {
endpoints
// ...
.tokenServices(tokenServices(endpoints));
}
public AuthorizationServerTokenServices tokenServices(final AuthorizationServerEndpointsConfigurer endpoints) {
final DefaultTokenServices tokenServices = new DefaultTokenServices();
tokenServices.setTokenStore(endpoints.getTokenStore());
tokenServices.setClientDetailsService(endpoints.getClientDetailsService());
tokenServices.setTokenEnhancer(endpoints.getTokenEnhancer());
// ...
tokenServices.setAuthenticationManager(
new ProviderManager(List.of(new MyCustomAuthProvider())));
return tokenServices;
}
}
The commit message says:
Add AuthenticationManager to default token services
So that it can be used to check user account changes in a refresh
token grant. If a global UserDetailsService is available it will be
used as a default (e.g. if user has a GlobalAuthenticationConfigurer).
It works by constructing a PreAuthenticationAuthenticationProvider
and using that the authenticate the user in DefaultTokenServices.
To customize that process, users can create their own
DefaultTokenServices and inject an AuthenticationManager.
Fixes gh-401
The authorisation endpoint requires a UserDetailsService.
Add this:
#Override
public void configure(AuthorizationServerEndpointsConfigurer endpoints) throws Exception {
endpoints.tokenStore(tokenStore());
endpoints.userDetailsService(userDetailsService);
endpoints.authenticationManager(authenticationManager)
.approvalStoreDisabled();
}
}
I'm running a SpringBoot application with a the root class being annotated with #SpringBootApplication, #EnableAutoConfiguration.
I've created a UserRepositoryInterface interface, which extends the CrudRepository interface with my User JPA object. There is no implementation for this interface and there was no need for one yet. Neither are there any configuration files for anything in this Application. Except for the JPA DB connection, but that works.
public interface UsersRepositoryInterface extends CrudRepository<User, Long> {
// Query to search for users via email
List<User> findByEmail(#Param("email") String email);
}
And I've succesfully Autowired it into some REST endpoints. The problem appears, when I try to Autowire it into my security classes. I'm trying for authentication with JWT and it works. Now I want to call the database during the log-in process and I'm having an issue. Here are the classes:
First the WebSecurityConfiguererAdapter class, where I add the paths to the filter. Note the line with "new JWTLoginFilter", which is the class where I try to Autowire:
#Configuration
#EnableWebSecurity
public class WebSecurityConfig extends WebSecurityConfigurerAdapter {
#Autowired
private CustomUserDetailsService userDetailsServ;
#Override
protected void configure(HttpSecurity http) throws Exception {
http.csrf().disable().authorizeRequests()
//Allow options pre-flight request
.antMatchers(HttpMethod.OPTIONS, "/**").permitAll()
// Allow POST request to /login
.antMatchers(HttpMethod.POST, "/login").permitAll()
// Others must be authenticated
.anyRequest().authenticated()
.and()
// We filter the api/login requests
.addFilterBefore(new JWTLoginFilter("/login", authenticationManager()),
UsernamePasswordAuthenticationFilter.class)
// And filter other requests to check the presence of JWT in header
.addFilterBefore(new JWTAuthenticationFilter(),
UsernamePasswordAuthenticationFilter.class);
}
#Override
protected void configure(AuthenticationManagerBuilder auth) throws Exception {
// Change logging in from username+password to email+password
auth.userDetailsService(userDetailsServ);
}
}
And the JWTLoginFilter class. I ommited some irrelevant code:
public class JWTLoginFilter extends AbstractAuthenticationProcessingFilter {
#Autowired
private UsersRepositoryInterface userRepo;
public JWTLoginFilter(String url, AuthenticationManager authManager) {
super(new AntPathRequestMatcher(url));
setAuthenticationManager(authManager);
}
#Override
public Authentication attemptAuthentication(
HttpServletRequest req, HttpServletResponse response)
throws AuthenticationException, IOException, ServletException {
//Check if userRepo is injected
if(userRepo == null) {
System.out.println("Null");
}
AccountCredentials creds = new ObjectMapper()
.readValue(req.getInputStream(), AccountCredentials.class);
return getAuthenticationManager().authenticate(
new UsernamePasswordAuthenticationToken(
creds.getEmail(),
creds.getPassword(),
Collections.emptyList()
)
);
}
}
The println in JWTLoginFilter will always return Null, when called upon.
Am I missing something?
SOLVED IT:
Works now.
Annotated the JWTLoginFilter with
#Component("someName")
And injected it in the WebSecurityConfig with
#Resource(name="someName")
private JWTLoginFilter myFilter;
Hardcoded the URL in the JWTLoginFilter constructor, but I still had to Autowire the AuthenticationManager from the WebSecurityConfig into the JWTLoginFilter.
First had to make the AuthenticationManager a Bean. Used the answer here: How To Inject AuthenticationManager using Java Configuration in a Custom Filter
#Bean(name = BeanIds.AUTHENTICATION_MANAGER)
#Override
public AuthenticationManager authenticationManagerBean() throws Exception {
return super.authenticationManagerBean();
}
Then injected it with answer here: Spring Security authenticationmanager must be specified - for custom filter
#Override
#Autowired
public void setAuthenticationManager(AuthenticationManager authenticationManager) {
super.setAuthenticationManager(authenticationManager);
}
While removing the
setAuthenticationManager(authManager);
in the constructor in JWTLoginFilter
Well, what do you expect? You are creating the JWTLoginFilter via the new keyword. Spring does not do any wiring here at all. You should make this filter a #Bean or #Component or whatever else to make it a spring bean and inject it into WebSecurityConfig somehow.
I Hope your problem has been resolved already. But I am adding a sample code snippet for reference for those who are facing the same issue.
When our filter contains Autowired dependencies, and instantiating our filter in spring configuration using new() would not autowire its dependencies as this won't be a string managed bean. Hence we need to autowire our filter in spring application configuration class , which in turn autowire its internal dependencies.
PFB the sample code for reference.
#SpringBootApplication
public class MyApplication extends SpringBootServletInitializer {
#Autowired
private MyFilter myFilter;
public static void main(String[] args) {
SpringApplication.run(MyApplication.class, args);
}
#Override
protected SpringApplicationBuilder configure(SpringApplicationBuilder builder) {
return builder.sources(MyApplication.class);
}
#Bean
public FilterRegistrationBean myFilterRegistration() {
FilterRegistrationBean registration = new FilterRegistrationBean();
registration.setFilter(myFilter);
registration.addUrlPatterns("*");
return registration;
}
}
Filter:
#Component
public class MyFilter extends BaseFilter {
#Autowired
private EmployeeRepository employeeRepository;
//your code goes here
if(employeeRepository != null) {
System.out.println("employeeRepository is not null");
}
}
I am having a problem similar to PreAuthorize annotation doesn't work with jersey. I created a configuration class for Spring Security and the authentication works but the authorization does not.
Here is my code
SpringSecurityConfig.java
#Configuration
#EnableWebSecurity
#EnableGlobalMethodSecurity(prePostEnabled = true, securedEnabled = true)
#Order(1)
#ComponentScan({"com.foo.rest.resources.Template"})
public class SpringSecurityConfig extends WebSecurityConfigurerAdapter {
private final UserService userService;
private final TokenAuthenticationService tokenAuthenticationService;
public SpringSecurityConfig() {
super(true);
this.userService = new UserService();
tokenAuthenticationService = new TokenAuthenticationService("tooManySecrets", userService);
}
#Override
protected void configure(HttpSecurity http) throws Exception {
http
.exceptionHandling().and()
.anonymous().and()
.servletApi().and()
.headers().cacheControl().and()
.authorizeRequests()
// Allow anonymous logins
.antMatchers("/auth/**").permitAll()
// All other request need to be authenticated
.anyRequest().authenticated().and()
// Custom Token based authentication based on the header previously given to the client
.addFilterBefore(new StatelessAuthenticationFilter(tokenAuthenticationService),
UsernamePasswordAuthenticationFilter.class);
}
#Override
protected void configure(AuthenticationManagerBuilder auth) throws Exception {
auth.userDetailsService(userDetailsService()).passwordEncoder(new BCryptPasswordEncoder());
}
#Bean
#Override
public AuthenticationManager authenticationManagerBean() throws Exception {
return super.authenticationManagerBean();
}
#Bean
#Override
public UserService userDetailsService() {
return userService;
}
#Bean
public TokenAuthenticationService tokenAuthenticationService() {
return tokenAuthenticationService;
}
}
and Template.java
#Component
#Path("/template")
#Produces(MediaType.APPLICATION_JSON)
public class Template {
#GET
#Secured("ROLE_EDITOR")
public User getTemplate() {
return new Template();
}
}
My guess is that the authentication is handled in the filter chain but it never comes back around after the authorization tag is reached. Any idea how to make this work?
I think your #ComponentScan is configured wrongly and doesn't pick the Template resource correctly.
According to #ComponentScan documentation the value is an alias for basePackages but you have given a Class instead of Package. Try and change it to look like following and see.
#ComponentScan({"com.foo.rest.resources.*"})
And make sure you haven't missed any steps in Jersey Spring Integration as per the documentation
I've been trying to get OAuth 2 working for my application but I continue running into configuration-related errors, specifically involving authentication tokens. The application is set up to act as both authorization and resource server. I've successfully configured it to issue tokens using password grant type, with an in-memory token store. However, every time I try to send requests for restricted resources, I get errors saying:
org.springframework.security.authentication.ProviderNotFoundException: No AuthenticationProvider found for org.springframework.security.web.authentication.preauth.PreAuthenticatedAuthenticationToken
So, I tried setting up a PreAuthenticationAuthenticationProvider in my configuration:
#Autowired
private UserDetailsManager userManager;
#Bean
public AuthenticationProvider preAuthenticationAuthenticationProvider() {
PreAuthenticatedAuthenticationProvider authenticationProvider =
new PreAuthenticatedAuthenticationProvider();
UserDetailsByNameServiceWrapper userDetailsWrapper = new UserDetailsByNameServiceWrapper(userManager);
authenticationProvider.setPreAuthenticatedUserDetailsService(userDetailsWrapper);
return authenticationProvider;
}
However, I'm getting NullPointerException in weird places, like:
java.lang.NullPointerException: null
at org.springframework.security.authentication.AccountStatusUserDetailsChecker.check(AccountStatusUserDetailsChecker.java:17) ~[spring-security-core-4.0.3.RELEASE.jar!/:4.0.3.RELEASE]
I'm wondering what the simplest configuration for this is, and why I need it in the first place? Is it because I have #PreAuthorize annotations?
Here's how I set up the resource server:
#Configuration
protected static class ResourceServer extends ResourceServerConfigurerAdapter {
#Autowired
private TokenStore tokenStore;
#Autowired
private AuthenticationManager authenticationManager;
#Override
public void configure(ResourceServerSecurityConfigurer resources) throws Exception {
resources.tokenStore(tokenStore).authenticationManager(authenticationManager);
}
#Override
public void configure(HttpSecurity http) throws Exception {
//http configuration
}
}
The TokenStore is just an instance of InMemoryTokenStore and AuthenticationManager is set up this way:
#Configuration
protected static class WebSecurity extends WebSecurityConfigurerAdapter {
#Autowired
protected UserDetailsManager userManager;
#Override
protected void configure(AuthenticationManagerBuilder auth) throws Exception {
auth.authenticationProvider(preAuthenticationAuthenticationProvider())
.userDetailsService(userManager).passwordEncoder(PASSWORD_ENCODER);
}
#Bean
#Override
protected AuthenticationManager authenticationManager() throws Exception {
return super.authenticationManager();
}
#Bean
protected AuthenticationProvider preAuthenticationAuthenticationProvider() {
PreAuthenticatedAuthenticationProvider authenticationProvider =
new PreAuthenticatedAuthenticationProvider();
UserDetailsByNameServiceWrapper userDetailsWrapper = new UserDetailsByNameServiceWrapper(userManager);
authenticationProvider.setPreAuthenticatedUserDetailsService(userDetailsWrapper);
return authenticationProvider;
}
}
What I was missing are AuthorizationServiceTokenServices and ResourceServerTokenServices. Both these interfaces are implmented by Spring's DefaultTokenServices.
#Bean
public DefaultTokenServices tokenServices() {
DefaultTokenServices tokenServices = new DefaultTokenServices();
tokenServices.setTokenStore(tokenStore());
tokenServices.setAuthenticationManager(authenticationManager);
return tokenServices;
}
In the authorization server configuration (AuthorizationServiceConfigurerAdapter), I have the following setup:
#Override
public void configure(AuthorizationServerEndpointsConfigurer endpoints) throws Exception {
endpoints.tokenServices(tokenServices()).authenticationManager(authenticationManager);
}
In the resource server configuration (ResourceServerConfigurerAdapter):
#Autowired
private DefaultTokenServices tokenServices;
#Override
public void configure(ResourceServerSecurityConfigurer resources) throws Exception {
resources.tokenServices(tokenServices);
}
With all these components, my app works without any PreAuthenticationAuthenticationProvider bean defined.