We Keep Coding

What happens when if statement goes true (in this code)?

There is a problem in codingbat.com which you're supposed to remove "yak" substring from the original string. and they provided a solution for that which I can't understand what happens when the if statement goes true!
public String stringYak(String str) {
String result = "";
for (int i=0; i<str.length(); i++) {
// Look for i starting a "yak" -- advance i in that case
if (i+2<str.length() && str.charAt(i)=='y' && str.charAt(i+2)=='k') {
i = i + 2;
} else { // Otherwise do the normal append
result = result + str.charAt(i);
}
}
return result;
}
It just adds up i by 2 and what? When it appends to the result string?
Link of the problem:
https://codingbat.com/prob/p126212

The provided solution checks for all single characters in the input string. For this i is the current index of the checked character. When the current char is not a y and also the (i+2) character is not a k the current char index is advanced by 1 position.
Example:
yakpak
012345
i
So here in the first iteration the char at i is y and i+2 is a k, so we have to skip 3 chars. Keep in mind i is advanced by 1 everytime. So i has to be increased by 2 more. After this iteration i is here
yakpak
012345
i
So now the current char is no y and this char will get added to the result string.
But it's even simpler in Java as this functionality is build in with regex:
public String stringYak(String str) {
return str.replaceAll("y.k","");
}
The . means every char.

If i is pointing at a y and there is as k two positions down, then it wants to skip the full y*k substring, so it add 2 to i so i now refers to the k. WHen then loop continues, i++ will skip past the k, so in effect, the entire 3-letter y*k substring has been skipped.

Inserting letters into a string at every possible spot [closed]

Closed. This question needs details or clarity. It is not currently accepting answers.
Want to improve this question? Add details and clarify the problem by editing this post.
Closed 6 years ago.
Improve this question
I am looking to insert a single letter one by one into every possible index of a string.
For example the string ry
Would go "ary" "bry" "cry" ... "zry" ... "ray" "rby" .... "rzy" ... "rya" "ryb"
I am not sure how to begin, any help?

Try this
System.out.println("originaltext".replaceAll(".{1}","$0ry"));
The above is using the String replaceAll(String regex, String replacement) method - "Replaces each substring of this string that matches the given regular expression with the given replacement."
".{1}" - The regular expression used to find exactly one occurrence({1}) of any character(.)
"$0ry" - The replacement string with "$0" for the matched value followed by the required characters(ry).
This is repeated for all matches!

Example Code
String originalString = /* your original string */;
char[] characters = /* array of characters you want to insert */;
Vector<String> newStrings = new Vector<>();
String newString;
for (int idx = 0; idx < originalString.length() + 1; ++idx) {
for (char ch : characters) {
newString = originalString.substring(0, idx)
+ ch
+ originalString.substring(idx, originalString.length());
newStrings.add(newString);
}
}
Explanation
Processing all cases:
In order to insert every single letter into an index in a string, you need a loop to iterate through every letter.
In order to insert a letter into every index in a string, you need a loop to iterate through every index in the string.
To do both at once, you should nest one loop inside the other. That way, every combination of an index and a character will be processed. In the problem you presented, it does not matter which loop goes inside the other--it will work either way.
(you actually have to iterate through every index in the string +1... I explain why below)
Forming the new string:
First, it is important to note the following:
What you want to do is not "insert a character into an index" but rather "insert a character between two indices". The distinction is important because you do not want to replace the previous character at that index, but rather move all characters starting at that index to the right by one index in order to make room for a new character "at that index."
This is why you must iterate through every index of the original string plus one. Because once you "insert" the character, the length of the new string is actually equal to originalString.length() + 1, i.e. there are n + 1 possible locations where you can "insert" the character.
Considering this, the way you actually form a new string (in the way you want to) is by getting everything to the left of your target index, getting everything to the right of your target index, and then concatenating them with the new character in between, e.g. leftSubstring + newCharacter + rightSubstring.
Now, it might seem that this would not work for the very first and very last index, because the leftSubstring and/or rightSubstring would be an empty string. However, string concatenation still works even with an empty string.
Notes about Example Code
characters can also be any collection that implements iterable. It does not have to be a primitive array.
characters does not have to contain primitive char elements. It may contain any type that can be concatenated with a String.
Note that the substring(int,int) method of String returns the substring including the character at beginIndex but not including the character at endIndex. One implication of this is that endIndex may be equal to string.length() without any problems.

Well you will need a loop for from i = 0 to your string's length
Then another loop for every character you want to insert - so if you want to keep creating new strings with every possible letter from A to Z make a loop from char A = 'a' to 'z' and keep increasing them ++A(this should work in java).
This should give you some ideas.

Supposing, for instance, you want them all in a list, you could do something like that (iterating all places to insert and iterating over all letters):
List<String> insertLetters(String s) {
List<String> list = new ArrayList<String>();
for (int i = 0; i <= s.length(); i++) {
String prefix = s.substring(0, i);
String postfix = s.substring(i, s.length());
for (char letter = 'a'; letter <= 'z'; letter++) {
String newString = prefix + letter + postfix;
list.add(newString);
}
}
return list;
}

String x = "ry";
char[] alphabets = "abcdefghijklmnopqrstuvwxyz".toCharArray();
String[] alphabets2 = new String[alphabets.length];
for (int i=0;i<alphabets.length;i++){
char z = alphabets[i];
alphabets2[i] = z + x;
}
for (String s: alphabets2
) {
System.out.println(s);
}

First of all you would need a Array of alphabet (Easier for you to continue).
I will not give you exact answer, but something to start, so you would learn.
int length = 0;
Arrays here
while(length <= 2) {
think what would be here: hint you put to index (length 0) the all alphabet and move to index 1 and then 2
}

A java string exercise i came across

Look for patterns like "zip" and "zap" in the string -- length-3, starting with 'z' and ending with 'p'. Return a string where for all such words, the middle letter is gone, so "zipXzap" yields "zpXzp"
Here is a solution i got from someone:
public class Rough {
public static void main(String [] args){
StringBuffer mat = new StringBuffer("matziplzdpaztp");
for(int i = 0; i < mat.length() - 2; ++i){
if (mat.charAt(i) == 'z' & mat.charAt(i + 2) == 'p'){
mat.deleteCharAt(i + 1);
}
}
System.out.println(mat);
}
}
But why is it that the for loop condition (i < mat.length() -2) is not (i < mat.length())????

Because in the loop:
if (mat.charAt(i) == 'z' & mat.charAt(i + 2) == 'p'){
// -----------------------------------^^^^^
If i were bound by i < mat.length(), then i + 2 would be out of bounds.

Because you don't have to reach the end of your sentence since your words are at least three letters long.

"2" stands for "the length except the first word",you just need to check all the positions in the string variable , and treat the positions as the first word of the substring , so just ignore the "length of the substring without the first word".
in your case , the length of "z*p" is 3, you just check all the position in the string , and treat the position as z to check something ,so just ignore "*p" ,which has length 2.

mat.length() will give length 14 and if you check for mat.charAt(i + 2) at the end it will give java.lang.StringIndexOutOfBoundsException because the string counts from index 0 not from 1. If you still want to use mat.length() you have to replace the AND '&' operator with short circuit AND '&&' operator in if condition.

How do I check if a char is a vowel?

This Java code is giving me trouble:
String word = <Uses an input>
int y = 3;
char z;
do {
z = word.charAt(y);
if (z!='a' || z!='e' || z!='i' || z!='o' || z!='u')) {
for (int i = 0; i==y; i++) {
wordT = wordT + word.charAt(i);
} break;
}
} while(true);
I want to check if the third letter of word is a non-vowel, and if it is I want it to return the non-vowel and any characters preceding it. If it is a vowel, it checks the next letter in the string, if it's also a vowel then it checks the next one until it finds a non-vowel.
Example:
word = Jaemeas then wordT must = Jaem
Example 2:
word=Jaeoimus then wordT must =Jaeoim
The problem is with my if statement, I can't figure out how to make it check all the vowels in that one line.

Clean method to check for vowels:
public static boolean isVowel(char c) {
return "AEIOUaeiou".indexOf(c) != -1;
}

Your condition is flawed. Think about the simpler version
z != 'a' || z != 'e'
If z is 'a' then the second half will be true since z is not 'e' (i.e. the whole condition is true), and if z is 'e' then the first half will be true since z is not 'a' (again, whole condition true). Of course, if z is neither 'a' nor 'e' then both parts will be true. In other words, your condition will never be false!
You likely want &&s there instead:
z != 'a' && z != 'e' && ...
Or perhaps:
"aeiou".indexOf(z) < 0

How about an approach using regular expressions? If you use the proper pattern you can get the results from the Matcher object using groups. In the code sample below the call to m.group(1) should return you the string you're looking for as long as there's a pattern match.
String wordT = null;
Pattern patternOne = Pattern.compile("^([\\w]{2}[AEIOUaeiou]*[^AEIOUaeiou]{1}).*");
Matcher m = patternOne.matcher("Jaemeas");
if (m.matches()) {
wordT = m.group(1);
}
Just a little different approach that accomplishes the same goal.

Actually there are much more efficient ways to check it but since you've asked what is the problem with yours, I can tell that the problem is you have to change those OR operators with AND operators. With your if statement, it will always be true.

So in event anyone ever comes across this and wants a easy compare method that can be used in many scenarios.
Doesn't matter if it is UPPERCASE or lowercase. A-Z and a-z.
bool vowel = ((1 << letter) & 2130466) != 0;
This is the easiest way I could think of. I tested this in C++ and on a 64bit PC so results may differ but basically there's only 32 bits available in a "32 bit integer" as such bit 64 and bit 32 get removed and you are left with a value from 1 - 26 when performing the "<< letter".
If you don't understand how bits work sorry i'm not going go super in depth but the technique of
1 << N is the same thing as 2^N power or creating a power of two.
So when we do 1 << N & X we checking if X contains the power of two that creates our vowel is located in this value 2130466. If the result doesn't equal 0 then it was successfully a vowel.
This situation can apply to anything you use bits for and even values larger then 32 for an index will work in this case so long as the range of values is 0 to 31. So like the letters as mentioned before might be 65-90 or 97-122 but since but we keep remove 32 until we are left with a remainder ranging from 1-26. The remainder isn't how it actually works, but it gives you an idea of the process.
Something to keep in mind if you have no guarantee on the incoming letters it to check if the letter is below 'A' or above 'u'. As the results will always be false anyways.
For example teh following will return a false vowel positive. "!" exclamation point is value 33 and it will provide the same bit value as 'A' or 'a' would.

For starters, you are checking if the letter is "not a" OR "not e" OR "not i" etc.
Lets say that the letter is i. Then the letter is not a, so that returns "True". Then the entire statement is True because i != a. I think what you are looking for is to AND the statements together, not OR them.
Once you do this, you need to look at how to increment y and check this again. If the first time you get a vowel, you want to see if the next character is a vowel too, or not. This only checks the character at location y=3.

String word="Jaemeas";
String wordT="";
int y=3;
char z;
do{
z=word.charAt(y);
if(z!='a'&&z!='e'&&z!='i'&&z!='o'&&z!='u'&&y<word.length()){
for(int i = 0; i<=y;i++){
wordT=wordT+word.charAt(i);
}
break;
}
else{
y++;
}
}while(true);
here is my answer.

I have declared a char[] constant for the VOWELS, then implemented a method that checks whether a char is a vowel or not (returning a boolean value). In my main method, I am declaring a string and converting it to an array of chars, so that I can pass the index of the char array as the parameter of my isVowel method:
public class FindVowelsInString {
static final char[] VOWELS = {'a', 'e', 'i', 'o', 'u'};
public static void main(String[] args) {
String str = "hello";
char[] array = str.toCharArray();
//Check with a consonant
boolean vowelChecker = FindVowelsInString.isVowel(array[0]);
System.out.println("Is this a character a vowel?" + vowelChecker);
//Check with a vowel
boolean vowelChecker2 = FindVowelsInString.isVowel(array[1]);
System.out.println("Is this a character a vowel?" + vowelChecker2);
}
private static boolean isVowel(char vowel) {
boolean isVowel = false;
for (int i = 0; i < FindVowelsInString.getVowel().length; i++) {
if (FindVowelsInString.getVowel()[i] == vowel) {
isVowel = true;
}
}
return isVowel;
}
public static char[] getVowel() {
return FindVowelsInString.VOWELS;
}
}

In following program, what is the purpose of the while loop?

There are no problems with the compilation, but whether or not I have the while loop in place or not, the result is the same. I can't understand why the while loop is included. BTW, this is just an example program from the Java SE tutorial:
public class ContinueWithLabelDemo {
public static void main(String[] args) {
String searchMe = "Look for a substring in me";
String substring = "sub";
boolean foundIt = false;
int max = searchMe.length() - substring.length();
test:
for (int i = 0; i <= max; i++) {
int n = substring.length();
int j = i;
int k = 0;
while (n-- != 0) { // WTF???
if (searchMe.charAt(j++) != substring.charAt(k++)) {
continue test;
}
}
foundIt = true;
break test;
}
System.out.println(foundIt ? "Found it" : "Didn't find it");
}
}

You can replace your
while (n-- != 0) { // WTF???
with
System.out.println("outside loop");
while (n-- != 0) { // WTF???
System.out.println("inside loop: comparing "
+ searchMe.charAt(j) + ":" + substring.charAt(k));
to see how this example works. Below is little explanation.
This code is searching for substring in searchMe string. Take a look at this example:
Look for a substring in me
^
sub
If you compare characters at position 0 in searchMe and substring you will notice that they are not the same L != s so we can skip matching rest of letters and go to next position (that is the purpose of continue test;)
Look for a substring in me
^
sub
So now we will try compare next letter with first letter of searchMe with first letter of substring. This time we get o!=s so there is no way that substring starts in this place, lets carry on.
After few comparisons we finally found promising place
Look for a substring in me
^
sub
where first letter of substring is the same as current letter in searchMe (s==s) so we wont jump from while loop yet and will try to check next letter. And we have another success
Look for a substring in me
^
sub
because u==u, so we will continue our loop until we iterate over our entire substring which can happen in next step.
Look for a substring in me
^
sub
And this time we compared b with b. Since they are equal and we don't have more letters in substring to check we can set value of foundIt to true and brake test for loop.
And that is the end.
If you remove while from your code you will get positive response as soon as you will find first character that will match first letter of substring in your case in after checking Look for a program will match s with first letter on substring which will also be s.
While loop is used here to iterate over entire substring and only in case of fail in matching corresponding characters we will move searching one place forward. If we would ignore this inner loop and just iterate over entire data we can ignore some positive results like in case where we would look for aab in aaab String. Take a look
aaab
aab
^^
^ will match but after them we will have to match a with b which will fail. Without inner while loop we would probably start another match from last checked position that failed which would be
aaab
aab
^
This time we also failed to find match for substring so we skipped a*aab* part.