I'm trying to connect to SAP ECC 6.0 using JCo. I'm following this tutorial. However, there is a Note saying:
For this example the destination configuration is stored in a file that is called by the program. In practice you should avoid this for security reasons.
And that is reasonable and understood. But, there is no explenation how to set up secure destination provider.
I found solution in this thread that created custom implementation of DestinationDataProvider and that works on my local machine. But when I deploy it on Portal I get an error saying that there is already registered DestinationDataProvider.
So my question is:
How to store destination data in SAP Java EE application?
Here is my code to further clarify what I'm trying to do.
public static void main(String... args) throws JCoException {
CustomDestinationProviderMap provider = new CustomDestinationProviderMap();
com.sap.conn.jco.ext.Environment.registerDestinationDataProvider(provider);
Properties connectProperties = new Properties();
connectProperties.setProperty(DestinationDataProvider.JCO_ASHOST, "host.sap.my.domain.com");
connectProperties.setProperty(DestinationDataProvider.JCO_SYSNR, "00");
connectProperties.setProperty(DestinationDataProvider.JCO_CLIENT, "100");
connectProperties.setProperty(DestinationDataProvider.JCO_USER, "user");
connectProperties.setProperty(DestinationDataProvider.JCO_PASSWD, "password");
connectProperties.setProperty(DestinationDataProvider.JCO_LANG, "en");
provider.addDestination(DESTINATION_NAME1, connectProperties);
connect();
}
public static void connect() throws JCoException {
String FUNCTION_NAME = "BAPI_EMPLOYEE_GETDATA";
JCoDestination destination = JCoDestinationManager.getDestination(DESTINATION_NAME1);
JCoContext.begin(destination);
JCoFunction function = destination.getRepository().getFunction(FUNCTION_NAME);
if (function == null) {
throw new RuntimeException(FUNCTION_NAME + " not found in SAP.");
}
//function.getImportParameterList().setValue("EMPLOYEE_ID", "48");
function.getImportParameterList().setValue("FSTNAME_M", "ANAKIN");
function.getImportParameterList().setValue("LASTNAME_M", "SKYWALKER");
try {
function.execute(destination);
} catch (AbapException e) {
System.out.println(e.toString());
return;
}
JCoTable table = function.getTableParameterList().getTable("PERSONAL_DATA");
for (int i = 0; i < table.getNumRows(); i++) {
table.setRow(i);
System.out.println(table.getString("PERNO") + '\t' + table.getString("FIRSTNAME") + '\t' + table.getString("LAST_NAME")
+'\t' + table.getString("BIRTHDATE")+'\t' + table.getString("GENDER"));
}
JCoContext.end(destination);
}
Ok, so I got this up and going and thought I'd share my research.
You need to add your own destination in Portal. To achieve that you need to go to NetWeaver Administrator, located at: host:port/nwa. So it'll be something like sapportal.your.domain.com:50000/nwa.
Then you go to Configuration-> Infrastructure-> Destinations and add your destination there. You can leave empty most of the fields like Message Server. The important part is Destination name as it is how you will retrieve it and destination type which should be set to RFC Destination in my case. Try pinging your newly created destination to check if its up and going.
Finally you should be able to get destination by simply calling: JCoDestination destination = JCoDestinationManager.getDestination(DESTINATION_NAME); as it is added to your Portal environment and managed from there.
Take a look at the CustomDestinationDataProvider in the JCo examples of the Jco connector download. The important parts are:
static class MyDestinationDataProvider implements DestinationDataProvider
...
com.sap.conn.jco.ext.Environment.registerDestinationDataProvider(new MyDestinationDataProvider());
Then you can simply do:
instance = JCoDestinationManager.getDestination(DESTINATION_NAME);
Btw. you may also want to check out http://hibersap.org/ as they provide nice ways to store the config as well.
Related
ADDED 7/23.
Many views: Not even a "that's dumb" question in response. Can anyone at least tell me why such an embarrassingly trivial question seems to have no answer anywhere.
Q:
--- Have Wildfly 8 running on local machine localhost:9990.
--- Have a Java program that need's Wildfly's IntialContext.
--- Every reference says use: "Context ctx = new InitialContext(env);"
--- Yet a week of searching turns up no set of properties that returns one.
And no example of a java program that gets one.
Does no one ever do this? Really need help
Original Msg Below
I know many people have asked how to get an Initial context from Wildfly 8. But I have yet to find a simple answer with a simple example.
Therefore, I hope someone can tell my why this doesn’t work.
I start Wildfly with standalone-full.xml
The three sections below have
A - Code summary of my test Class whose only purpose is to secure an Initial Context. (I only removed a lot of printing code that produced the next section.]
B - The Eclipse console output for a failure.
C - Cut and paste code. Just in case anyone can help me get this to work. I’d like to leave behind something the next new WF user can cut and past and run. The only difference from 1 above is that this version has all the static methods I used to format the output. NOTE: I know the comments I inserted about the less than sign sound dumb. BUT ... they are true.
A Code Summary
import java.util.Properties;
import javax.naming.CommunicationException;
import javax.naming.Context;
import javax.naming.InitialContext;
public class JmsTestGetJNDIContext {
//members
final private Properties env = new Properties() {
private static final long serialVersionUID = 1L;
{
/* These are Properties used by a standalone JavaClient to secure a WIldFly InitialContext()*/
put(Context.INITIAL_CONTEXT_FACTORY, "org.jboss.naming.remote.client.InitialContextFactory");
put(Context.PROVIDER_URL,"http-remoting://localhost:9990");
put(Context.SECURITY_PRINCIPAL,"userGLB");
put(Context.SECURITY_CREDENTIALS,"Open");
put("jboss.naming.client.ejb.context", true);
/*The above URL, ID and PW successfully open Wildfly's Admin Console*/
}
};
//constructor
private JmsTestGetJNDIContext (){
/*print "beg"*/
/*print "env"*/
try {
/*print "Requesting InitialContext"*/
Context ctx = new InitialContext(this.env);
/*print "JNDI Context: " + ctx)*/
/*print "end");
} catch (CommunicationException e) {
/* print "You forgot to start WildFly dummy!"*/
} catch (Exception e) {
/* print"caught: " + e.getClass().getName()*/
/*print e.getMessage()*/
/* "end")*/
}
static public void main (String[] args) {
/*print "beg"*/
JmsTestGetJNDIContext client = new JmsTestGetJNDIContext ();
/*print "end"*/
}
}
B - Console Output
JmsTestGetJNDIContext.main () beg
JmsTestGetJNDIContext.<init> () beg
JmsTestGetJNDIContext.<init> () These are Properties used to obtain IntialContext
Key: java.naming.provider.url
Value: http-remoting://localhost:9990
Key: java.naming.factory.initial
Value: org.jboss.naming.remote.client.InitialContextFactory
Key: jboss.naming.client.ejb.context
Value: true
Key: java.naming.security.principal
Value: userGLB
Key: java.naming.security.credentials
Value: Open
JmsTestGetJNDIContext.<init> () Requesting InitialContext
JmsTestGetJNDIContext.<init> () caught: javax.naming.NamingException
JmsTestGetJNDIContext.<init> () Failed to create remoting connection
JmsTestGetJNDIContext.<init> () end
JmsTestGetJNDIContext.main () end
Cut and Paste Code
package org.america3.gotest.xtra;
import java.util.Properties;
import javax.naming.CommunicationException;
import javax.naming.Context;
import javax.naming.InitialContext;
public class JmsTestGetJNDIContext {
//members
final private Properties env = new Properties() {
/**
* Properties used by a standalone JavaClient to secure
* a WIldFly InitialContext()*/
private static final long serialVersionUID = 1L;
{
put(Context.INITIAL_CONTEXT_FACTORY,"org.jboss.naming.remote.client.InitialContextFactory");
put(Context.PROVIDER_URL, "http-remoting://localhost:9990");
put(Context.SECURITY_PRINCIPAL, "userGLB");
put(Context.SECURITY_CREDENTIALS, "Open");
// The above URL, ID and PW successfully open Wildfly's Admin Console
put("jboss.naming.client.ejb.context", true);
}
};
//constructor
private JmsTestGetJNDIContext (){/*ignore*/String iAm = JmsTestGetJNDIContext.getIAm(" ", Thread.currentThread().getStackTrace());
P (iAm, "beg");
pProps(iAm, env);
try {
P (sp + iAm, "Requesting InitialContext");
Context ctx = new InitialContext(this.env);
P (sp + iAm, "JNDI Context: " + ctx);
P (sp + iAm, "end");
} catch (CommunicationException e) {
P (sp + iAm, "You forgot to start WildFly dummy!");
} catch (Exception e) {
P (sp + iAm, "caught: " + e.getClass().getName());
P (sp + iAm, e.getMessage());
P (iAm, "end");
}
}
static public void main (String[] args) {/*ignore*/String iAm = JmsTestGetJNDIContext.getIAm("",Thread.currentThread().getStackTrace());
P (iAm, "beg");
JmsTestGetJNDIContext client = new JmsTestGetJNDIContext ();
P (iAm , "end");
}
/*The remaining static methods are just to facilitate printing.
* They are normally in a Untility package I add to my projects.
* I put them here so this code would run for anyone.*/
static private void pProps (String leader, Properties p) {
StringBuffer sb = new StringBuffer ();
String s = JmsTestGetJNDIContext.padRight(leader, 45, ' ');
s = " " + s + "These are Properties used to obtain IntialContext"+"\n";
sb.append(s);
String skip = "";
for (Object key: p.keySet()) {
sb.append(skip + " " + JmsTestGetJNDIContext.padRight("\""
+ (String)key + "\"", 40, ' ')
+ " \"" + p.get(key) + "\"");
skip = "\n";
}
System.out.println(sb);
}
static private void P (String s, String s2) {
System.out.println(s + s2);
}
static public String getClassMethodName (StackTraceElement[] elements) {
String className = null;
for (int i = 0; i * elements.length; i++]i ) {
/* You need to type in a less than sign for the '*'
* because when I do, the editor will not show any code
* that comes after it.
* I have no idea why, but I've spent over an hour trying,
* and every time I type a less than sign all the following
* code dissappears!*/
className = elements[i].getClassName ();
if (className.startsWith ("org.america3")) {
int end = className.lastIndexOf ('.');
return className.substring (end + 1) + "." + elements[i].getMethodName ();
} else {
continue;
}
}
return "no project method found in elements beginning with org.america3" ;
}
static private String getIAm (String indent, StackTraceElement[] elements) {
StringBuffer sb = new StringBuffer ();
sb.append(JmsTestGetJNDIContext.getClassMethodName(elements));
sb.append(" ()");
return indent + JmsTestGetJNDIContext.padRight (sb.toString(), 45, ' ') ;
}
static public String padRight(String s, int width, char c){
if (s == null) return "Null String";
if(s.length() ** width){
/* You need to type in a greater than or equal sign for
* the '**'see above.*/
return s;
} else {
StringBuffer sb = new StringBuffer();
sb.append (s);
for(int i = 0; i *** (width - s.length()); i++){
/*You need to type in a less than sign the '***'. Again see above*/
sb.append(c);
}
return sb.toString();
}
}
static public String sp = " ";
}
A while ago I also struggled with remote EJBs in my CLI application. I excavated a small example project that I wrote then. It gets an InitialContext and calls a remote EJB named AddBrackets:
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import de.dnb.test.ejb.AddBrackets;
public final class Application {
public static void main(String[] args) throws NamingException {
final Properties jndiProperties = initJndiProperties();
final AddBrackets addBrackets = getEjb(jndiProperties);
System.out.println(addBrackets.processText("Hello World"));
}
private static Properties initJndiProperties() {
final Properties jndiProperties = new Properties();
jndiProperties.put(Context.INITIAL_CONTEXT_FACTORY,
"org.jboss.naming.remote.client.InitialContextFactory");
jndiProperties.put("jboss.naming.client.ejb.context", true);
jndiProperties.put(Context.PROVIDER_URL, "http-remoting://localhost:8080/");
//jndiProperties.put(Context.SECURITY_PRINCIPAL, "test");
//jndiProperties.put(Context.SECURITY_CREDENTIALS, "test");
return jndiProperties;
}
private static AddBrackets getEjb(Properties jndiProps)
throws NamingException {
final Context jndiContext = new InitialContext(jndiProps);
final String interfaceName = AddBrackets.class.getName();
return (AddBrackets) jndiContext.lookup(
"ejbtest-app-1.0-SNAPSHOT/ejbtest-ejb-1.0-SNAPSHOT/AddBracketsBean!"
+ interfaceName);
}
}
I built this program as a Maven project which had a dependency on
<dependency>
<groupId>org.wildfly</groupId>
<artifactId>wildfly-ejb-client-bom</artifactId>
<version>8.2.1.Final</version>
<type>pom</type>
</dependency>
This dependency brings in Wildfly's remote client EJB implementation and adds the following jars to the class path (links are to Maven Central):
jboss-logging-3.1.4.GA.jar
jboss-marshalling-1.4.9.Final.jar
jboss-marshalling-river-1.4.9.Final.jar
jboss-remoting-4.0.7.Final.jar
jboss-sasl-1.0.4.Final.jar
jboss-ejb-api_3.2_spec-1.0.0.Final.jar
jboss-transaction-api_1.2_spec-1.0.0.Final.jar
xnio-api-3.3.0.Final.jar
xnio-nio-3.3.0.Final.jar
jboss-ejb-client-2.0.1.Final.jar
jboss-remote-naming-2.0.1.Final.jar
wildfly-build-config-8.2.1.Final.jar
I did no special configuration on Wildfly to run this example. I simply downloaded a vanilla Wildfly 8.2.1, unzipped it, set up an admin user with the add-user.sh script and deployed my EJB in an EAR. As you can see above access is granted without a username and a password.
You can find the complete project including the AddBrackets EJB on my bitbucket account.
When I tried to get my head around remote EJBs with Wildfly, I found the article JBoss EAP / Wildfly – Three ways to invoke remote EJBs really helpful. It clearly describes the three different methods to access remote EJBs on Wildfly.
According to your own answer the following jars are on your classpath:
jboss-remote-naming-1.0.7.final.jar
jboss-logging.jar
xnio-api-3.0.7.ga.jar
jboss-remoting-3.jar
jboss-ejb-client-1.0.19.final.jar
You write that the application throws the following exception:
java.lang.NoSuchMethodError:
org.jboss.remoting3.Remoting.createEndpoint(Ljava/lang/String;Lorg/xnio/OptionMap;)Lorg/jboss/remoting3/Endpoint;]
This exception is thrown when org.jboss.naming.remote.client.EndpointCache which is part of the jboss-remote-naming jar tries to call Remoting.createEndpoint() which is contained in the jboss-remoting jar.
As you explain in your answer the reason for this is that the Remoting class declares a 3-parameter version of the createEndpoint() method while the EndpointCache class tries to call a 2-parameter version which does not exist.
I checked the commit histories and declared dependencies of the jboss-remote-naming and the jboss-remoting projects to find out what is going wrong there. This is what I found out:
The 2-parameter version of createEndpoint() was only added in version 3.2 of jboss-remoting. The pom.xml for jboss-remote-naming-1.0.7.final says it depends on jboss-remoting 3.2.7.GA.
As there is no version number on your jboss-remoting-3.jar, I guess it is an older version. You should be able to check this by looking for a pom.xml in META-INF folder of your jboss-remoting-3.jar. This should contain the version number.
To solve your problem, I suggest to replace your jboss-remoting-3.jar with jboss-remoting-3.2.7ga.jar or to use the set of jars I listed in my other answer.
I’ve decided the problem isn’t coding or the JNDI InititialContext Properties.
I mean the fatal error is a NoSuchMethodError. Therefore, as I confirmed in the WildFly server logs, my main method never even tries to connect.
Here’s what I think explains the real problem.
And I think it explains why there are so many calls for help with this error:
java.lang.NoSuchMethodError:
org.jboss.remoting3.Remoting.createEndpoint(Ljava/lang/String;Lorg/xnio/OptionMap;)Lorg/jboss/remoting3/Endpoint;]
Also why none of those calls for help ever get a conclusive answer. Just people suggesting different jars.
And since all those answers fixed on jars, this is how I tested the Build Path I was using:
First I removed all jars from the Build Path. Then I ran my one line main program till all ClassNotFoundException were gone.
First Error
java.lang.ClassNotFoundException:
org.jboss.naming.remote.client.InitialContextFactory]
Added jboss-remote-naming-1.0.7.final.jar to class path
Next Error
java.lang.NoClassDefFoundError:
org/jboss/logging/Logger
Added jboss-logging.jar
Next Error
java.lang.NoClassDefFoundError:
org/xnio/Options
Added xnio-api-3.0.7.ga.jar
Next Error
java.lang.NoClassDefFoundError:
org/jboss/remoting3/spi/ConnectionProviderFactory
Added jboss-remoting-3.jar
Next Error
java.lang.NoClassDefFoundError:
org/jboss/ejb/client/EJBClientContextIdentifier
Added jboss-ejb-client-1.0.19.final.jar
FATAL ERROR (note: All NoClassDefFoundError have been cleared)
java.lang.NoSuchMethodError:
org.jboss.remoting3.Remoting.createEndpoint(Ljava/lang/String;Lorg/xnio/OptionMap;)Lorg/jboss/remoting3/Endpoint;]
Then I used Eclipse’s Project Explorer to verify:
That jboss-remoting3.jar has the org.jboss.remoting3.Remoting Class. It does. That’s why there is no NoClassDefFoundError left above.
And verified it had this method:
public Endpoint createEndpoint (String, Executor, OptionMap) note: 3 parameters.
BUT the above Error indicates something is calling:
public Endpoint createEndpoint (String, OptionMap) note: 2 parameters.
That’s why the program throws a NoSuchMethodError. It is looking for a 2 paramater version of org.jboss.remoting3.Remoting.createEndpoint(). And the Remoting Class I have only has a 3 parameter version.`
I know this sounds impossible but the only thing I can think is there is an inconsistency in the Java API???
Clearly something is calling org.jboss.remoting3.Remoting.createEndpoint with 2 parameters.
But my org.jboss.remoting3.Remoting Class only has a 3 parameter version of the createEndpoint() Method.
So I’m going to clean this all up and repost a question asking how to explain the existence of a Class calling for a 2 paramter org.jboss.remoting3.Remoting.createEndpoint Method when I have a jar whose org.jboss.remoting3.Remoting only offers a 3-parameter.
Here is your obligatory "that's a dumb question." Does the wildfly remote quickstart github repo answer the question for you? Their code, from RemoteEJB.java
final Hashtable<String, String> jndiProperties = new Hashtable<>();
jndiProperties.put(Context.URL_PKG_PREFIXES, "org.jboss.ejb.client.naming");
final Context context = new InitialContext(jndiProperties);
return (RemoteCalculator) context.lookup("ejb:/ejb-remote-server-side/CalculatorBean!" + RemoteCalculator.class.getName());
I am using P4Java library in my build.gradle file to sync a large zip file (>200MB) residing at a remote Perforce repository but I am encountering a "java.net.SocketTimeoutException: Read timed out" error either during the sync process or (mostly) during deleting the temporary client created for the sync operation. I am referring http://razgulyaev.blogspot.in/2011/08/p4-java-api-how-to-work-with-temporary.html for working with temporary clients using P4Java API.
I tried increasing the socket read timeout from default 30 sec as suggested in http://answers.perforce.com/articles/KB/8044 and also by introducing sleep but both approaches didn't solved the problem. Probing the server to verify the connection using getServerInfo() right before performing sync or delete operations results in a successful connection check. Can someone please point me as to where I should look for answers?
Thank you.
Providing the code snippet:
void perforceSync(String srcPath, String destPath, String server) {
// Generating the file(s) to sync-up
String[] pathUnderDepot = [
srcPath + "*"
]
// Increasing timeout from default 30 sec to 60 sec
Properties defaultProps = new Properties()
defaultProps.put(PropertyDefs.PROG_NAME_KEY, "CustomBuildApp")
defaultProps.put(PropertyDefs.PROG_VERSION_KEY, "tv_1.0")
defaultProps.put(RpcPropertyDefs.RPC_SOCKET_SO_TIMEOUT_NICK, "60000")
// Instantiating the server
IOptionsServer p4Server = ServerFactory.getOptionsServer("p4java://" + server, defaultProps)
p4Server.connect()
// Authorizing
p4Server.setUserName("perforceUserName")
p4Server.login("perforcePassword")
// Just check if connected successfully
IServerInfo serverInfo = p4Server.getServerInfo()
println 'Server info: ' + serverInfo.getServerLicense()
// Creating new client
IClient tempClient = new Client()
// Setting up the name and the root folder
tempClient.setName("tempClient" + UUID.randomUUID().toString().replace("-", ""))
tempClient.setRoot(destPath)
tempClient.setServer(p4Server)
// Setting the client as the current one for the server
p4Server.setCurrentClient(tempClient)
// Creating Client View entry
ClientViewMapping tempMappingEntry = new ClientViewMapping()
// Setting up the mapping properties
tempMappingEntry.setLeft(srcPath + "...")
tempMappingEntry.setRight("//" + tempClient.getName() + "/...")
tempMappingEntry.setType(EntryType.INCLUDE)
// Creating Client view
ClientView tempClientView = new ClientView()
// Attaching client view entry to client view
tempClientView.addEntry(tempMappingEntry)
tempClient.setClientView(tempClientView)
// Registering the new client on the server
println p4Server.createClient(tempClient)
// Surrounding the underlying block with try as we want some action
// (namely client removing) to be performed in any way
try {
// Forming the FileSpec collection to be synced-up
List<IFileSpec> fileSpecsSet = FileSpecBuilder.makeFileSpecList(pathUnderDepot)
// Syncing up the client
println "Syncing..."
tempClient.sync(FileSpecBuilder.getValidFileSpecs(fileSpecsSet), true, false, false, false)
}
catch (Exception e) {
println "Sync failed. Trying again..."
sleep(60 * 1000)
tempClient.sync(FileSpecBuilder.getValidFileSpecs(fileSpecsSet), true, false, false, false)
}
finally {
println "Done syncing."
try {
p4Server.connect()
IServerInfo serverInfo2 = p4Server.getServerInfo()
println '\nServer info: ' + serverInfo2.getServerLicense()
// Removing the temporary client from the server
println p4Server.deleteClient(tempClient.getName(), false)
}
catch(Exception e) {
println 'Ignoring exception caught while deleting tempClient!'
/*sleep(60 * 1000)
p4Server.connect()
IServerInfo serverInfo3 = p4Server.getServerInfo()
println '\nServer info: ' + serverInfo3.getServerLicense()
sleep(60 * 1000)
println p4Server.deleteClient(tempClient.getName(), false)*/
}
}
}
One unusual thing which I observed while deleting tempClient was it was actually deleting the client but still throwing "java.net.SocketTimeoutException: Read timed out" which is why I ended up commenting the second delete attempt in the second catch block.
Which version of P4Java are you using? Have you tried this out with the newest P4Java? There are notable fixes dealing with RPC sockets since the 2013.2 version forward as can be seen in the release notes:
http://www.perforce.com/perforce/doc.current/user/p4javanotes.txt
Here are some variations that you can try where you have your code to increase timeout and instantiating the server:
a] Have you tried to passing props in its own argument,? For example:
Properties prop = new Properties();
prop.setProperty(RpcPropertyDefs.RPC_SOCKET_SO_TIMEOUT_NICK, "300000");
UsageOptions uop = new UsageOptions(prop);
server = ServerFactory.getOptionsServer(ServerFactory.DEFAULT_PROTOCOL_NAME + "://" + serverPort, prop, uop);
Or something like the following:
IOptionsServer p4Server = ServerFactory.getOptionsServer("p4java://" + server, defaultProps)
You can also set the timeout to "0" to give it no timeout.
b]
props.put(RpcPropertyDefs.RPC_SOCKET_SO_TIMEOUT_NICK, "60000");
props.put(RpcPropertyDefs.RPC_SOCKET_POOL_SIZE_NICK, "5");
c]
Properties props = System.getProperties();
props.put(RpcPropertyDefs.RPC_SOCKET_SO_TIMEOUT_NICK, "60000");
IOptionsServer server =
ServerFactory.getOptionsServer("p4java://perforce:1666", props, null);
d] In case you have Eclipse users using our P4Eclipse plugin, the property can be set in the plugin preferences (Team->Perforce->Advanced) under the Custom P4Java Properties.
"sockSoTimeout" : "3000000"
REFERENCES
Class RpcPropertyDefs
http://perforce.com/perforce/doc.current/manuals/p4java-javadoc/com/perforce/p4java/impl/mapbased/rpc/RpcPropertyDefs.html
P4Eclipse or P4Java: SocketTimeoutException: Read timed out
http://answers.perforce.com/articles/KB/8044
When performing a programmatic login using WSCallbackHandlerImpl and there is no java.naming.provider.url set as a system property or in the jndi.properties file, one needs to call:
Object obj = initialContext.lookup("");
prior to performing the login.
Afterwards the following code works:
LoginContext lc = null;
try {
lc = new LoginContext("WSLogin",
new WSCallbackHandlerImpl("userName", "realm", "password"));
} catch (LoginException le) {
System.out.println("Cannot create LoginContext. " + le.getMessage());
// insert error processing code
} catch(SecurityException se) {
System.out.printlin("Cannot create LoginContext." + se.getMessage();
// Insert error processing
}
See: http://publib.boulder.ibm.com/infocenter/wsdoc400/v6r0/index.jsp?topic=/com.ibm.websphere.iseries.doc/info/ae/ae/xsec_jaas.html
Neither the obj nor the initialContext gets passed to the WSCallbackHandlerImpl or the LoginContext.
According to the Javadoc, InitialContext.lookup("") returns a new instance of the context.
Questions:
Why is this empty string lookup needed in this case?
How does WSCallbackHandlerImpl get the server URL?
Is this WebSphere specific?
I'm experimenting with java flavored zmq to test the benefits of using PGM over TCP in my project. So I changed the weather example, from the zmq guide, to use the epgm transport.
Everything compiles and runs, but nothing is being sent or received. If I change the transport back to TCP, the server receives the messages sent from the client and I get the console output I'm expecting.
So, what are the requirements for using PGM? I changed the string, that I'm passing to the bind and connect methods, to follow the zmq api for zmq_pgm: "transport://interface;multicast address:port". That didn't work. I get and invalid argument error whenever I attempt to use this format. So, I simplified it by dropping the interface and semicolon which "works", but I'm not getting any results.
I haven't been able to find a jzmq example that uses pgm/epgm and the api documentation for the java binding does not define the appropriate string format for an endpoint passed to bind or connect. So what am I missing here? Do I have to use different hosts for the client and the server?
One thing of note is that I'm running my code on a VirtualBox VM (Ubuntu 14.04/OSX Mavericks host). I'm not sure if that has anything to do with the issue I'm currently facing.
Server:
public class wuserver {
public static void main (String[] args) throws Exception {
// Prepare our context and publisher
ZMQ.Context context = ZMQ.context(1);
ZMQ.Socket publisher = context.socket(ZMQ.PUB);
publisher.bind("epgm://xx.x.x.xx:5556");
publisher.bind("ipc://weather");
// Initialize random number generator
Random srandom = new Random(System.currentTimeMillis());
while (!Thread.currentThread ().isInterrupted ()) {
// Get values that will fool the boss
int zipcode, temperature, relhumidity;
zipcode = 10000 + srandom.nextInt(10000) ;
temperature = srandom.nextInt(215) - 80 + 1;
relhumidity = srandom.nextInt(50) + 10 + 1;
// Send message to all subscribers
String update = String.format("%05d %d %d", zipcode, temperature, relhumidity);
publisher.send(update, 0);
}
publisher.close ();
context.term ();
}
}
Client:
public class wuclient {
public static void main (String[] args) {
ZMQ.Context context = ZMQ.context(1);
// Socket to talk to server
System.out.println("Collecting updates from weather server");
ZMQ.Socket subscriber = context.socket(ZMQ.SUB);
//subscriber.connect("tcp://localhost:5556");
subscriber.connect("epgm://xx.x.x.xx:5556");
// Subscribe to zipcode, default is NYC, 10001
String filter = (args.length > 0) ? args[0] : "10001 ";
subscriber.subscribe(filter.getBytes());
// Process 100 updates
int update_nbr;
long total_temp = 0;
for (update_nbr = 0; update_nbr < 100; update_nbr++) {
// Use trim to remove the tailing '0' character
String string = subscriber.recvStr(0).trim();
StringTokenizer sscanf = new StringTokenizer(string, " ");
int zipcode = Integer.valueOf(sscanf.nextToken());
int temperature = Integer.valueOf(sscanf.nextToken());
int relhumidity = Integer.valueOf(sscanf.nextToken());
total_temp += temperature;
}
System.out.println("Average temperature for zipcode '"
+ filter + "' was " + (int) (total_temp / update_nbr));
subscriber.close();
context.term();
}
}
There are a couple possibilities:
You need to make sure ZMQ is compiled with the --with-pgm option: see here - but this doesn't appear to be your issue if you're not seeing "protocol not supported"
Using raw pgm requires root privileges because it requires the ability to create raw sockets... but epgm doesn't require that, so it shouldn't be your issue either (I only bring it up because you use the term "pgm/epgm", and you should be aware that they are not equally available in all situations)
What actually appears to be the problem in your case is that pgm/epgm requires support along the network path. In theory, it requires support out to your router, so your application can send a single message and have your router send out multiple messages to each client, but if your server is aware enough, it can probably send out multiple messages immediately and bypass this router support. The problem is, as you correctly guessed, trying to do this all on one host is not supported.
So, you need different hosts for client and server.
Another bit to be aware of is that some virtualization environments--RHEV/Ovirt and libvirt/KVM with the mac_filter option enabled come to mind-- that, by default, neuter one's abilities via (eb|ip)tables to utilize mcast between guests. With libvirt, of course, the solution is to simply set the option to '0' and restart libvirtd. RHEV/Ovirt require a custom plugin.
At any rate, I would suggest putting a sniffer on the network devices on each system you are using and watching to be sure traffic that is exiting the one host is actually visible on the other.
Busy trying to Call RPG function from Java and got this example from JamesA. But now I am having trouble, here is my code:
AS400 system = new AS400("MachineName");
ProgramCall program = new ProgramCall(system);
try
{
// Initialise the name of the program to run.
String programName = "/QSYS.LIB/LIBNAME.LIB/FUNNAME.PGM";
// Set up the 3 parameters.
ProgramParameter[] parameterList = new ProgramParameter[2];
// First parameter is to input a name.
AS400Text OperationsItemId = new AS400Text(20);
parameterList[0] = new ProgramParameter(OperationsItemId.toBytes("TestID"));
AS400Text CaseMarkingValue = new AS400Text(20);
parameterList[1] = new ProgramParameter(CaseMarkingValue.toBytes("TestData"));
// Set the program name and parameter list.
program.setProgram(programName, parameterList);
// Run the program.
if (program.run() != true)
{
// Report failure.
System.out.println("Program failed!");
// Show the messages.
AS400Message[] messagelist = program.getMessageList();
for (int i = 0; i < messagelist.length; ++i)
{
// Show each message.
System.out.println(messagelist[i]);
}
}
// Else no error, get output data.
else
{
AS400Text text = new AS400Text(50);
System.out.println(text.toObject(parameterList[1].getOutputData()));
System.out.println(text.toObject(parameterList[2].getOutputData()));
}
}
catch (Exception e)
{
//System.out.println("Program " + program.getProgram() + " issued an exception!");
e.printStackTrace();
}
// Done with the system.
system.disconnectAllServices();
The application Hangs at this lineif (program.run() != true), and I wait for about 10 minutes and then I terminate the application.
Any idea what I am doing wrong?
Edit
Here is the message on the job log:
Client request - run program QSYS/QWCRTVCA.
Client request - run program LIBNAME/FUNNAME.
File P6CASEL2 in library *LIBL not found or inline data file missing.
Error message CPF4101 appeared during OPEN.
Cannot resolve to object YOBPSSR. Type and Subtype X'0201' Authority
FUNNAME insert a row into table P6CASEPF through a view called P6CASEL2. P6CASEL2 is in a different library lets say LIBNAME2. Is there away to maybe set the JobDescription?
Are you sure FUNNAME.PGM is terminating and not hung with a MSGW? Check QSYSOPR for any messages.
Class ProgramCall:
NOTE: When the program runs within the host server job, the library list will be the initial library list specified in the job description in the user profile.
So I saw that my problem is that my library list is not setup, and for some reason, the user we are using, does not have a Job Description. So to over come this I added the following code before calling the program.run()
CommandCall command = new CommandCall(system);
command.run("ADDLIBLE LIB(LIBNAME)");
command.run("ADDLIBLE LIB(LIBNAME2)");
This simply add this LIBNAME, and LIBNAME2 to the user's library list.
Oh yes, the problem is Library list not set ... take a look at this discussion on Midrange.com, there are different work-around ...
http://archive.midrange.com/java400-l/200909/msg00032.html
...
Depe