I have a string which I want to split after every n characters and store the same in an array of strings, but this should ignore all the whitespaces.
For example I have a string as follows,
String str = "This is a String which needs to be splitted after every 10 characters";
The output should be,
["This is a Str", "ing which nee", "ds to be split", "ted after ev", "ery 10 chara", "cters"]
(Edit) --> I am using the function below. How can I store this in an array of Strings.
As seen in the output it ignores indexes of all the whitespaces. Is there any way to do it in java.
public static String test(int cnt, String string) {
AtomicInteger n = new AtomicInteger(cnt);
return string
.chars()
.boxed()
.peek(value -> {
if (!Character.isWhitespace(value)) {
n.decrementAndGet();
}
})
.takeWhile(value -> n.get() >= 0)
.map(Character::toString)
.collect(Collectors.joining());
I have used a standard approach with looping through the string and counting chars:
public static void main(String[] args) throws ParseException {
String str = "This is a String which needs to be splitted after every 10 characters";
System.out.println(split(str, 10));
}
public static List<String> split(String string, int splitAfter) {
List<String> result = new ArrayList<String>();
int startIndex = 0;
int charCount = 0;
for (int i = 0; i < string.length(); i++) {
if (charCount == splitAfter) {
result.add(string.substring(startIndex, i));
startIndex = i;
charCount = 0;
}
// only count non-whitespace characters
if (string.charAt(i) != ' ') {
charCount++;
}
}
// check if startIndex is less than string length -> if yes, then last element wont be 10 characters long
if (startIndex < string.length()) {
result.add(string.substring(startIndex));
}
return result;
}
And the result differs slightly from what you posted, but looking at your expected result, it doesn't quite match the description anyways:
[This is a Str, ing which ne, eds to be spl, itted after, every 10 cha, racters]
The purpose of this method is replace all but the first and last letters of each word with "_". I'm a complete novice when it comes to coding, so I'm certain my code is fairly incorrect. I think where my code starts functioning improperly is with the while loop.
EDIT: How do I make this method without using arrays or extra methods, like the split method?
public static String blankWords(String s1) {
StringBuilder sb = new StringBuilder();
if(s1.length() > 2) {
sb.append(s1.charAt(0));
for(int x = 1; x < s1.length() - 1; x = x + 1) {
char y = ' ';
while(y != s1.charAt(x)) {
sb.append("_");
x = x + 1;
}
}
sb.append(s1.charAt(s1.length() - 1));
return sb.toString();
}
return s1;
}
What my code is outputting:
HW2.blankWords("This is a Test.")
java.lang.StringIndexOutOfBoundsException: String index out of range: 15
at java.lang.String.charAt(Unknown Source)
at HW2.blankWords(HW2.java:73)
What my code should output:
HW2.blankWords("This is a Test.")
"T__s is a T__t."
Here is a pretty simple solution:
class Scratch {
public static void main(String[] args) {
System.out.println(blankWords("My name is sam orozco"));
}
public static String delim = "_";
public static String blankWords(String s1) {
// this split arg on one or more space
String[] words = s1.split("\\s+");
StringBuilder response = new StringBuilder();
for (String val : words) {
val = convertWord(val);
response.append(val).append(" ");
}
return response.toString().trim();
}
public static String convertWord(String val) {
int len = val.length();
StringBuilder bldr = new StringBuilder();
int index = 0;
for (char ch : val.toCharArray()) {
if (index == 0 || index == len - 1) {
bldr.append(ch);
} else {
bldr.append(delim);
}
index++;
}
return bldr.toString();
}
}
You can do this using a StringTokenizer that will extract words based on a list of delimiters. Since you want to keep those delimiters in the output, you'll instruct the tokenizer to return them as tokens:
String blankWords(String s) {
// build a tokenizer for your string, listing all special chars as delimiters. The last argument says that delimiters are going to be returned as tokens themselves (so we can include them in the output string)
StringTokenizer tokenizer = new StringTokenizer(s, " .,;:?!()[]{}", true);
// a helper class to build the output string; think of it as just a more efficient concat utility
StringBuilder sb = new StringBuilder();
while (tokenizer.hasMoreTokens()) {
String blankWord = blank(tokenizer.nextToken());
sb.append(blankWord);
}
return sb.toString();
}
/**
* Replaces all but the first and last characters in a string with '_'
*/
private String blank(String word) {
// strings of up to two chars will be returned as such
// delimiters will always fall into this category, as they are always single characters
if (word.length() <= 2) {
return word;
}
// no need to iterate through all chars, we'll just get the array
final char[] chars = word.toCharArray();
// fill the array of chars with '_', starting with position 1 (the second char) up to the last char (exclusive, i.e. last-but-one)
Arrays.fill(chars, 1, chars.length - 1, '_');
// build the resulting word based on the modified array of chars
return new String(chars);
}
Here is the contents of a test that validates this implementation, using TestNG:
#Test(dataProvider = "texts")
public void testBlankWords(String input, String expectedOutput) {
assertEquals(blankWords(input), expectedOutput);
}
#DataProvider
public Object[][] texts() {
return new Object[][] {
{"This is a test.", "T__s is a t__t."},
{"This one, again, is (yet another) test!", "T__s o_e, a___n, is (y_t a_____r) t__t!"}
};
}
The main drawback of this implementation is that StringTokenizer requires you to list all the delimiters by hand. With a more advanced implementation, you can consider a delimiter any character that returns false for Character.isAlphabetic(c) or however you decide to define your non-word chars.
P.S.
This could be a "more advanced implementation", as I mentioned above:
static String blankWords(String text) {
final char[] textChars = text.toCharArray();
int wordStart = -1; // keep track of the current word start position, -1 means no current word
for (int i = 0; i < textChars.length; i++) {
if (!Character.isAlphabetic(textChars[i])) {
if (wordStart >= 0) {
for (int j = wordStart + 1; j < i - 1; j++) {
textChars[j] = '_';
}
}
wordStart = -1; // reset the current word to none
} else if (wordStart == -1) {
wordStart = i; // alphabetic characters start a new word, when there's none started already
} else if (i == textChars.length - 1) { // if the last character is aplhabetic
for (int j = wordStart + 1; j < i; j++) {
textChars[j] = '_';
}
}
}
return new String(textChars);
}
No while loop necessary!
Look ahead by 1 character to see if it's a space, or if the current character is a space, in that case you append it. Otherwise you make sure to add the next character (skipNext false).
Always add the last character
public static String blankWords(String s1) {
StringBuilder sb = new StringBuilder();
if(s1.length() > 2) {
Boolean skipNext = false;
for(int x = 0; x < s1.length() - 1; x = x + 1) {
if(s1.charAt(x) == ' ' || s1.charAt(x + 1) == ' ') {
sb.append(s1.charAt(x));
skipNext = false;
}
else {
if(skipNext) {
sb.append('_');
}
else {
sb.append(s1.charAt(x));
skipNext = true;
}
}
}
sb.append(s1.charAt(s1.length() - 1));
return sb.toString();
}
return s1;
}
For the more advanced programmer, use regular expression.
public static String blankWords(String s1) {
return s1.replaceAll("\\B\\w\\B", "_");
}
This correctly keeps the final t, i.e. blankWords("This is a Test.") returns "T__s is a T__t.".
I'm making a method
public static String merge(String... s)
This is the input:
String a = merge("AM ","L","GEDS","ORATKRR","","R TRTE","IO","TGAUU");
System.out.println(a);
Expected Output:
ALGORITMER OG DATASTRUKTURER
I try to run a loop many times so that it picks up s[0].charAt(index) and appends it to a string for output. The problem I run into is that when I try to run the loop for s[1].charAt(1) it's null, I want it to not get StringIndexOutOfBoundsException, and instead continue to s[2] and appends s[2].char to the String.
How do I go about that?
You need to check the length of each String before trying to access its i'th character :
StringBuilder sb = new StringBuilder();
int index = 0;
boolean maxLengthReached = false;
while (!maxLengthReached) {
maxLengthReached = true;
for (String str : input) {
if (index < str.length) {
sb.append(str.charAt(index));
maxLengthReached = false;
}
}
index++;
}
return sb.toString();
Just to clarify, I'm using a boolean maxLengthReached to determine when the last character of the longest String is appended to the output. If in a full iteration over all the Strings in the input array we don't find any String long enough to have charAt(index), we know we are done.
First you need a method to get the longest String, something like -
private static String getLongestString(String... arr) {
String str = arr[0];
for (int i = 1; i < arr.length; i++) {
if (arr[i].length() > str.length()) {
str = arr[i];
}
}
return str;
}
Then you can write a nested loop in your merge(), something like -
public static String merge(String... stringArray) {
StringBuilder sb = new StringBuilder();
int pos = 0;
int len = getLongestString(stringArray).length();
while (pos < len) {
for (String str : stringArray) {
if (str.length() > pos) {
sb.append(str.charAt(pos));
}
}
pos++;
}
return sb.toString();
}
Then you can call it -
public static void main(String[] args) {
String a = merge("AM ", "L", "GEDS", "ORATKRR", "", "R TRTE", "IO",
"TGAUU");
System.out.println(a);
}
Output is (the requested) -
ALGORITMER OG DATASTRUKTURER
The following code does what you need. It works for any number of strings because it uses the varargs (three dots) that allow you to pass any number of strings into merge
Use the getLongest() to find the length of the longest string.
static int getLongest(String... strings) {
int len = 0;
for(String str : strings) {
if(str.length() > len) {
len = str.length();
}
}
return len;
}
Then you merge all the i-th character from each String into a StringBuilder.
static String merge(String ...strings) {
int longest = getLongest(strings);
StringBuilder sb = new StringBuilder();
for(int i = 0; i < longest; i++) {
for(String str : strings) {
if(i < str.length()) {
sb.append(str.charAt(i));
}
}
}
return sb.toString();
}
public static void main(String[] args) {
String a = merge("AM ","L","GEDS","ORATKRR","","R TRTE","IO","TGAUU");
System.out.println(a);
}
Output
ALGORITMER OG DATASTRUKTURER
Language : Java
Key Notes: *Needs to loop through a String using either a For loop or While loop
*It removes the duplicate letter(s) of the String and returns the word without the dupilcates.
Eg: The string is HELLO - The method then loops through and removes any duplicates, in this case " L " and returns in the end HELO
i have this so far
private String removeAnyDuplicates(String userWord)
{
//Code goes here?
return "" ; // Need to return the new string
}
You can do that with regular expressions. e.g.:
private static final Pattern REGEX_PATTERN =
Pattern.compile("(.)\\1*");
public static void main(String[] args) {
String input = "HELLO, AABBCC";
System.out.println(
REGEX_PATTERN.matcher(input).replaceAll("$1")
); // prints "HELO, ABC"
}
I'm assuming that removing duplicates means that the result contains at most one occurrence of any character. (Some of the other answers assume that adjacent duplicates only need to be reduced to single occurrences.) The basic algorithm would be:
initialize the result to the empty string
loop through each character of the input and if the character is not already present in the result, append it to the result
return the result
A naive (and very inefficient) implementation would be:
private String removeAnyDuplicates(String userWord)
{
String result = "";
for (int i = 0; i < userWord.length(); ++i) {
char c = result.charAt(i);
if (result.indexOf(c) < 0) {
// negative index indicates not present
result += String.valueOf(c);
}
}
return result;
}
This has two major sources of inefficiency: it creates many intermediate String objects and it has to scan the entire result so far for each character of the input. These problems can be solved by using some other built-in Java classes—a StringBuilder to more efficiently accumulate the result and a Set implementation to efficiently record and test which characters have already been seen:
private String removeAnyDuplicates(String userWord)
{
int len = userWord.length();
StringBuilder result = new StringBuilder(len);
Set<Character> unique = new HashSet<Character>();
for (int i = 0; i < len; ++i) {
char c = result.charAt(i);
// try to add c to set of unique characters
if (unique.add(c)) {
// if it succeeds, this is the first time seeing c
result.append(c);
}
}
return result.toString();
}
private String removeAnyDuplicates(String userWord)
{
CharSequence inputStr = userWord;
int length = inputStr.length();
Set<Character> uniqueChars = new HashSet<Character>();
for(int i=0; i < length; ++i) {
uniqueChars.add(inputStr.charAt(i));
}
return uniqueChars.size() >= 3;
}
check out this answer
Convert the string to an array of char, and store it in a LinkedHashSet. That will preserve your ordering, and remove duplicates.
Like this:
private static String removeAnyDuplicates(String userWord)
{
char[] chars = userWord.toCharArray();
Set<Character> charSet = new LinkedHashSet<Character>();
for (char c : chars) {
charSet.add(c);
}
StringBuilder sb = new StringBuilder();
for (Character character : charSet) {
sb.append(character);
}
return sb.toString();
}
Remember:
import java.util.LinkedHashSet;
import java.util.Set;
You can try this
public static void main(String args[]){
System.out.println(removeAnyDuplicates("HELLO"));
}
private static String removeAnyDuplicates(String userWord)
{
char[] arr=userWord.toCharArray();
List<String> list=new ArrayList<>();
for(int i=0;i<arr.length;i++){
if(!list.contains(String.valueOf(arr[i]))){
list.add(String.valueOf(arr[i]));
}
}
return list.toString().replaceAll("\\[|\\]|\\,","") ;
}
Try this one liner:
private String removeAnyDuplicates(String userWord) {
return userWord.replaceAll("(.)\\1+", "$1");
}
This uses a regular expression to find repeated (2 or more) letters and replaces them with a single instance of the letter.
It is unclear if "repeated" means appearing immediately after or anywhere after. For anywhere, use this:
private String removeAnyDuplicates(String userWord) {
return userWord.replaceAll("(.)(?=.*\\1)", "");
}
I am trying to iterate through a string in order to remove the duplicates characters.
For example the String aabbccdef should become abcdef
and the String abcdabcd should become abcd
Here is what I have so far:
public class test {
public static void main(String[] args) {
String input = new String("abbc");
String output = new String();
for (int i = 0; i < input.length(); i++) {
for (int j = 0; j < output.length(); j++) {
if (input.charAt(i) != output.charAt(j)) {
output = output + input.charAt(i);
}
}
}
System.out.println(output);
}
}
What is the best way to do this?
Convert the string to an array of char, and store it in a LinkedHashSet. That will preserve your ordering, and remove duplicates. Something like:
String string = "aabbccdefatafaz";
char[] chars = string.toCharArray();
Set<Character> charSet = new LinkedHashSet<Character>();
for (char c : chars) {
charSet.add(c);
}
StringBuilder sb = new StringBuilder();
for (Character character : charSet) {
sb.append(character);
}
System.out.println(sb.toString());
Using Stream makes it easy.
noDuplicates = Arrays.asList(myString.split(""))
.stream()
.distinct()
.collect(Collectors.joining());
Here is some more documentation about Stream and all you can do with
it :
https://docs.oracle.com/javase/8/docs/api/java/util/stream/package-summary.html
The 'description' part is very instructive about the benefits of Streams.
Try this simple solution:
public String removeDuplicates(String input){
String result = "";
for (int i = 0; i < input.length(); i++) {
if(!result.contains(String.valueOf(input.charAt(i)))) {
result += String.valueOf(input.charAt(i));
}
}
return result;
}
I would use the help of LinkedHashSet. Removes dups (as we are using a Set, maintains the order as we are using linked list impl). This is kind of a dirty solution. there might be even a better way.
String s="aabbccdef";
Set<Character> set=new LinkedHashSet<Character>();
for(char c:s.toCharArray())
{
set.add(Character.valueOf(c));
}
Create a StringWriter. Run through the original string using charAt(i) in a for loop. Maintain a variable of char type keeping the last charAt value. If you iterate and the charAt value equals what is stored in that variable, don't add to the StringWriter. Finally, use the StringWriter.toString() method and get a string, and do what you need with it.
Here is an improvement to the answer by Dave.
It uses HashSet instead of the slightly more costly LinkedHashSet, and reuses the chars buffer for the result, eliminating the need for a StringBuilder.
String string = "aabbccdefatafaz";
char[] chars = string.toCharArray();
Set<Character> present = new HashSet<>();
int len = 0;
for (char c : chars)
if (present.add(c))
chars[len++] = c;
System.out.println(new String(chars, 0, len)); // abcdeftz
Java 8 has a new String.chars() method which returns a stream of characters in the String. You can use stream operations to filter out the duplicate characters like so:
String out = in.chars()
.mapToObj(c -> Character.valueOf((char) c)) // bit messy as chars() returns an IntStream, not a CharStream (which doesn't exist)
.distinct()
.map(Object::toString)
.collect(Collectors.joining(""));
String input = "AAAB";
String output = "";
for (int index = 0; index < input.length(); index++) {
if (input.charAt(index % input.length()) != input
.charAt((index + 1) % input.length())) {
output += input.charAt(index);
}
}
System.out.println(output);
but you cant use it if the input has the same elements, or if its empty!
Code to remove the duplicate characters in a string without using any additional buffer. NOTE: One or two additional variables are fine. An extra array is not:
import java.util.*;
public class Main{
public static char[] removeDupes(char[] arr){
if (arr == null || arr.length < 2)
return arr;
int len = arr.length;
int tail = 1;
for(int x = 1; x < len; x++){
int y;
for(y = 0; y < tail; y++){
if (arr[x] == arr[y]) break;
}
if (y == tail){
arr[tail] = arr[x];
tail++;
}
}
return Arrays.copyOfRange(arr, 0, tail);
}
public static char[] bigArr(int len){
char[] arr = new char[len];
Random r = new Random();
String alphabet = "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890!##$%^&*()-=_+[]{}|;:',.<>/?`~";
for(int x = 0; x < len; x++){
arr[x] = alphabet.charAt(r.nextInt(alphabet.length()));
}
return arr;
}
public static void main(String args[]){
String result = new String(removeDupes(new char[]{'a', 'b', 'c', 'd', 'a'}));
assert "abcd".equals(result) : "abcda should return abcd but it returns: " + result;
result = new String(removeDupes(new char[]{'a', 'a', 'a', 'a'}));
assert "a".equals(result) : "aaaa should return a but it returns: " + result;
result = new String(removeDupes(new char[]{'a', 'b', 'c', 'a'}));
assert "abc".equals(result) : "abca should return abc but it returns: " + result;
result = new String(removeDupes(new char[]{'a', 'a', 'b', 'b'}));
assert "ab".equals(result) : "aabb should return ab but it returns: " + result;
result = new String(removeDupes(new char[]{'a'}));
assert "a".equals(result) : "a should return a but it returns: " + result;
result = new String(removeDupes(new char[]{'a', 'b', 'b', 'a'}));
assert "ab".equals(result) : "abba should return ab but it returns: " + result;
char[] arr = bigArr(5000000);
long startTime = System.nanoTime();
System.out.println("2: " + new String(removeDupes(arr)));
long endTime = System.nanoTime();
long duration = (endTime - startTime);
System.out.println("Program took: " + duration + " nanoseconds");
System.out.println("Program took: " + duration/1000000000 + " seconds");
}
}
How to read and talk about the above code:
The method called removeDupes takes an array of primitive char called arr.
arr is returned as an array of primitive characters "by value". The arr passed in is garbage collected at the end of Main's member method removeDupes.
The runtime complexity of this algorithm is O(n) or more specifically O(n+(small constant)) the constant being the unique characters in the entire array of primitive chars.
The copyOfRange does not increase runtime complexity significantly since it only copies a small constant number of items. The char array called arr is not stepped all the way through.
If you pass null into removeDupes, the method returns null.
If you pass an empty array of primitive chars or an array containing one value, that unmodified array is returned.
Method removeDupes goes about as fast as physically possible, fully utilizing the L1 and L2 cache, so Branch redirects are kept to a minimum.
A 2015 standard issue unburdened computer should be able to complete this method with an primitive char array containing 500 million characters between 15 and 25 seconds.
Explain how this code works:
The first part of the array passed in is used as the repository for the unique characters that are ultimately returned. At the beginning of the function the answer is: "the characters between 0 and 1" as between 0 and tail.
We define the variable y outside of the loop because we want to find the first location where the array index that we are looking at has been duplicated in our repository. When a duplicate is found, it breaks out and quits, the y==tail returns false and the repository is not contributed to.
when the index x that we are peeking at is not represented in our repository, then we pull that one and add it to the end of our repository at index tail and increment tail.
At the end, we return the array between the points 0 and tail, which should be smaller or equal to in length to the original array.
Talking points exercise for coder interviews:
Will the program behave differently if you change the y++ to ++y? Why or why not.
Does the array copy at the end represent another 'N' pass through the entire array making runtime complexity O(n*n) instead of O(n) ? Why or why not.
Can you replace the double equals comparing primitive characters with a .equals? Why or why not?
Can this method be changed in order to do the replacements "by reference" instead of as it is now, "by value"? Why or why not?
Can you increase the efficiency of this algorithm by sorting the repository of unique values at the beginning of 'arr'? Under which circumstances would it be more efficient?
public class RemoveRepeated4rmString {
public static void main(String[] args) {
String s = "harikrishna";
String s2 = "";
for (int i = 0; i < s.length(); i++) {
Boolean found = false;
for (int j = 0; j < s2.length(); j++) {
if (s.charAt(i) == s2.charAt(j)) {
found = true;
break; //don't need to iterate further
}
}
if (found == false) {
s2 = s2.concat(String.valueOf(s.charAt(i)));
}
}
System.out.println(s2);
}
}
public static void main(String a[]){
String name="Madan";
System.out.println(name);
StringBuilder sb=new StringBuilder(name);
for(int i=0;i<name.length();i++){
for(int j=i+1;j<name.length();j++){
if(name.charAt(i)==name.charAt(j)){
sb.deleteCharAt(j);
}
}
}
System.out.println("After deletion :"+sb+"");
}
import java.util.Scanner;
public class dublicate {
public static void main(String... a) {
System.out.print("Enter the String");
Scanner Sc = new Scanner(System.in);
String st=Sc.nextLine();
StringBuilder sb=new StringBuilder();
boolean [] bc=new boolean[256];
for(int i=0;i<st.length();i++)
{
int index=st.charAt(i);
if(bc[index]==false)
{
sb.append(st.charAt(i));
bc[index]=true;
}
}
System.out.print(sb.toString());
}
}
To me it looks like everyone is trying way too hard to accomplish this task. All we are concerned about is that it copies 1 copy of each letter if it repeats. Then because we are only concerned if those characters repeat one after the other the nested loops become arbitrary as you can just simply compare position n to position n + 1. Then because this only copies things down when they're different, to solve for the last character you can either append white space to the end of the original string, or just get it to copy the last character of the string to your result.
String removeDuplicate(String s){
String result = "";
for (int i = 0; i < s.length(); i++){
if (i + 1 < s.length() && s.charAt(i) != s.charAt(i+1)){
result = result + s.charAt(i);
}
if (i + 1 == s.length()){
result = result + s.charAt(i);
}
}
return result;
}
String str1[] ="Hi helloo helloo oooo this".split(" ");
Set<String> charSet = new LinkedHashSet<String>();
for (String c: str1)
{
charSet.add(c);
}
StringBuilder sb = new StringBuilder();
for (String character : charSet)
{
sb.append(character);
}
System.out.println(sb.toString());
I think working this way would be more easy,,,
Just pass a string to this function and the job is done :) .
private static void removeduplicate(String name)
{ char[] arr = name.toCharArray();
StringBuffer modified =new StringBuffer();
for(char a:arr)
{
if(!modified.contains(Character.toString(a)))
{
modified=modified.append(Character.toString(a)) ;
}
}
System.out.println(modified);
}
public class RemoveDuplicatesFromStingsMethod1UsingLoops {
public static void main(String[] args) {
String input = new String("aaabbbcccddd");
String output = "";
for (int i = 0; i < input.length(); i++) {
if (!output.contains(String.valueOf(input.charAt(i)))) {
output += String.valueOf(input.charAt(i));
}
}
System.out.println(output);
}
}
output: abcd
You can't. You can create a new String that has duplicates removed. Why aren't you using StringBuilder (or StringBuffer, presumably)?
You can run through the string and store the unique characters in a char[] array, keeping track of how many unique characters you've seen. Then you can create a new String using the String(char[], int, int) constructor.
Also, the problem is a little ambiguous—does “duplicates” mean adjacent repetitions? (In other words, what should happen with abcab?)
Oldschool way (as we wrote such a tasks in Apple ][ Basic, adapted to Java):
int i,j;
StringBuffer str=new StringBuffer();
Scanner in = new Scanner(System.in);
System.out.print("Enter string: ");
str.append(in.nextLine());
for (i=0;i<str.length()-1;i++){
for (j=i+1;j<str.length();j++){
if (str.charAt(i)==str.charAt(j))
str.deleteCharAt(j);
}
}
System.out.println("Removed non-unique symbols: " + str);
Here is another logic I'd like to share. You start comparing from midway of the string length and go backward.
Test with:
input = "azxxzy";
output = "ay";
String removeMidway(String input){
cnt = cnt+1;
StringBuilder str = new StringBuilder(input);
int midlen = str.length()/2;
for(int i=midlen-1;i>0;i--){
for(int j=midlen;j<str.length()-1;j++){
if(str.charAt(i)==str.charAt(j)){
str.delete(i, j+1);
midlen = str.length()/2;
System.out.println("i="+i+",j="+j+ ",len="+ str.length() + ",midlen=" + midlen+ ", after deleted = " + str);
}
}
}
return str.toString();
}
Another possible solution, in case a string is an ASCII string, is to maintain an array of 256 boolean elements to denote ASCII character appearance in a string. If a character appeared for the first time, we keep it and append to the result. Otherwise just skip it.
public String removeDuplicates(String input) {
boolean[] chars = new boolean[256];
StringBuilder resultStringBuilder = new StringBuilder();
for (Character c : input.toCharArray()) {
if (!chars[c]) {
resultStringBuilder.append(c);
chars[c] = true;
}
}
return resultStringBuilder.toString();
}
This approach will also work with Unicode string. You just need to increase chars size.
Solution using JDK7:
public static String removeDuplicateChars(final String str){
if (str == null || str.isEmpty()){
return str;
}
final char[] chArray = str.toCharArray();
final Set<Character> set = new LinkedHashSet<>();
for (char c : chArray) {
set.add(c);
}
final StringBuilder sb = new StringBuilder();
for (Character character : set) {
sb.append(character);
}
return sb.toString();
}
String str = "eamparuthik#gmail.com";
char[] c = str.toCharArray();
String op = "";
for(int i=0; i<=c.length-1; i++){
if(!op.contains(c[i] + ""))
op = op + c[i];
}
System.out.println(op);
public static String removeDuplicateChar(String str){
char charArray[] = str.toCharArray();
StringBuilder stringBuilder= new StringBuilder();
for(int i=0;i<charArray.length;i++){
int index = stringBuilder.toString().indexOf(charArray[i]);
if(index <= -1){
stringBuilder.append(charArray[i]);
}
}
return stringBuilder.toString();
}
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
public class RemoveDuplicacy
{
public static void main(String args[])throws IOException
{
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
System.out.print("Enter any word : ");
String s = br.readLine();
int l = s.length();
char ch;
String ans=" ";
for(int i=0; i<l; i++)
{
ch = s.charAt(i);
if(ch!=' ')
ans = ans + ch;
s = s.replace(ch,' '); //Replacing all occurrence of the current character by a space
}
System.out.println("Word after removing duplicate characters : " + ans);
}
}
public static void main(String[] args) {
int i,j;
StringBuffer str=new StringBuffer();
Scanner in = new Scanner(System.in);
System.out.print("Enter string: ");
str.append(in.nextLine());
for (i=0;i<str.length()-1;i++)
{
for (j=1;j<str.length();j++)
{
if (str.charAt(i)==str.charAt(j))
str.deleteCharAt(j);
}
}
System.out.println("Removed String: " + str);
}
This is improvement on solution suggested by #Dave. Here, I am implementing in single loop only.
Let's reuse the return of set.add(T item) method and add it simultaneously in StringBuffer if add is successfull
This is just O(n). No need to make a loop again.
String string = "aabbccdefatafaz";
char[] chars = string.toCharArray();
StringBuilder sb = new StringBuilder();
Set<Character> charSet = new LinkedHashSet<Character>();
for (char c : chars) {
if(charSet.add(c) ){
sb.append(c);
}
}
System.out.println(sb.toString()); // abcdeftz
Simple solution is to iterate through the given string and put each unique character into another string(in this case, a variable result ) if this string doesn't contain that particular character.Finally return result string as output.
Below is working and tested code snippet for removing duplicate characters from the given string which has O(n) time complexity .
private static String removeDuplicate(String s) {
String result="";
for (int i=0 ;i<s.length();i++) {
char ch = s.charAt(i);
if (!result.contains(""+ch)) {
result+=""+ch;
}
}
return result;
}
If the input is madam then output will be mad.
If the input is anagram then output will be angrm
Hope this helps.
Thanks
For the simplicity of the code- I have taken hardcore input, one can take input by using Scanner class also
public class KillDuplicateCharInString {
public static void main(String args[]) {
String str= "aaaabccdde ";
char arr[]= str.toCharArray();
int n = arr.length;
String finalStr="";
for(int i=0;i<n;i++) {
if(i==n-1){
finalStr+=arr[i];
break;
}
if(arr[i]==arr[i+1]) {
continue;
}
else {
finalStr+=arr[i];
}
}
System.out.println(finalStr);
}
}
public static void main (String[] args)
{
Scanner sc = new Scanner(System.in);
String s = sc.next();
String str = "";
char c;
for(int i = 0; i < s.length(); i++)
{
c = s.charAt(i);
str = str + c;
s = s.replace(c, ' ');
if(i == s.length() - 1)
{
System.out.println(str.replaceAll("\\s", ""));
}
}
}
package com.st.removeduplicate;
public class RemoveDuplicate {
public static void main(String[] args) {
String str1="shushil",str2="";
for(int i=0; i<=str1.length()-1;i++) {
int count=0;
for(int j=0;j<=i;j++) {
if(str1.charAt(i)==str1.charAt(j))
count++;
if(count >1)
break;
}
if(count==1)
str2=str2+str1.charAt(i);
}
System.out.println(str2);
}
}